I just hear the effects on the track, and the actually vocals are faint. How do I fix this?

3xlouder wrote:
I just hear the effects on the track, and the actually vocals are faint. How do I fix this?
try toggling the Ducking menuItem

Similar Messages

When I click on the popup to remember password it doesn't take. The popup just sits there. I close it and password is not saved. How do I fix this?

This is not just problem sites like gmail or yahoo. Every site I go to is having this same problem. Window pops up asking to "remember password for x on x" and I press the "Remember Password" button and nothing happens. The popup just stays there like it didn't register my response. Finally I close it and ultimately the password is not saved. It's clearly a bug but I can't figure how to fix it. Any suggestions?

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
It is possible that there is a problem with the files key3.db and signons.sqlite that store the encrypted names and passwords in Firefox. 
Rename the files key3.db and signons.sqlite in the Firefox profile folder. 
You can add .old to the file names (key3.db.old and signons.sqlite.old) or move them to another folder to make it possible to undo the action. 
You need to set a new Master Password after renaming or deleting key3.db and all currently saved passwords are lost. 
If that has worked then you can remove the renamed files that are no longer needed.
See:
* "Troubleshooting" in http://kb.mozillazine.org/Password_Manager
* http://kb.mozillazine.org/Profile_folder_-_Firefox.

FireFox doesn't fully close so whenever I reopen it refuses to open secure sites I had up when I closed it; it keeps thinking that the tab is already open and wont open another one. How do you fix this?

Whenever I close Firefox and then reopen it later on it opens the last webpage I had open before closing the browser instead of my homepage. It seems that exiting Firefox doesn't fully shut it down and just puts it into hibernation mode. This has become a problem because when I have a secure webpage open when I close the web browser, without logging out of the page, and then try to go to that page again it thinks that it's already open and wont open another page for me. This means that I can't even navigate to the page to log out. I think it might be just a setting with Firefox 4 but not sure which one, any suggestions?

For possible causes and solutions see [[Firefox is already running but is not responding]].

I have a new laptop so I download again iTunes...the problem here is that I just got a cd and I tried to put it on my iPod and it won't let me, how can I fix this?

I have a new laptop so I download again iTunes...the problem here is that I just got a cd and I tried to put it on my iPod and it won't let me, how can I fix this?

The iPod sees the new computer as a new iTunes library. You can only sync with one iTunes library. However, you can manage music among disfferent computers. See:
Using iPhone, iPad, or iPod with multiple computers

TS1702 Just got the Iphone 4s in June, now everytime I go to download an app, it will not download. When I go to get updates, the apps will not download. I tried, reinstalling, resyncing, turning the phone off and on, what is happening? How do I fix thi

Just got the Iphone 4s in June, now everytime I go to download an app, it will not download. When I go to get updates, the apps will not download. I tried, reinstalling, resyncing, turning the phone off and on, what is happening? How do I fix this?

Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download

Upon syncing my iPhone and mac all of my ical and iPhone calendar events have duplicated. how can i fix this and avoid it in the future?

upon syncing my iPhone and mac all of my ical and iPhone calendar events have duplicated. how can i fix this and avoid it in the future?

Greetings,
Questions:
1. What version of the Mac OS are you running (Apple > About this Mac)?
2. What version of the iOS are you running (Settings > About)?
3. Do you backup your computer (http://support.apple.com/kb/HT1427)?
--- If you don't regularly backup your computer, now is the time to start.
4. Do you backup your iPhone (http://support.apple.com/kb/ht1766)?
Check the calendar list on the left hand side of iCal. Is it that the individual events are duplicated or is it just that you have the same calendar listed more than once? If its that you have more than 1 copy of each calendar, you can delete one of the duplicate calendars to eliminate the duplicates.
If you find that it is the individual events that are duplicated then there are 2 options:
1. Restore your computer iCal database or iPhone from a backup made before the duplication occurred.
2. Use a duplication removal program (or do it by hand) to remove the duplicates: http://www.nhoj.co.uk/icaldupedeleter/
If you have a backup made before the duplication occurred, reply back with what kind of backup you have and I'll suggest how to recover the calendars.
To avoid this issue in the future:
Keep regular backups. They are your best defense against data anomalies which are a fact of life in computers (although hopefully rare).
Keep your computer and iPhone software fully up to date (Apple > Software Update / Settings > General > Software Update).
Make sure the date and time on your computer and iPhone are correct before you sync the two devices.
Make sure the cable connections between the two is solid and that the cable shows no signs of physical damage.
Hope that information helps.

I have a 2008 vintage iMac with 2.8GHz processor and recently upgraded to OS X 10.9.5. Soon after theupgrade the mail system started switching the senders address to another address, but same user name. How do you fix this?

I have a 2008 vintage iMac with 2.8GHz processor and recently upgraded to OS X 10.9.5. Soon after theupgrade the mail system started switching the senders address to another address, but same user name. How do you fix this?

Thanks for the reply,. I went to the site provided and executed the directions but this did not solve the issue.
Even more details:
If I send a message to the Jane Doe address from another account on this machine (all my family uses the same email services provider and each have accounts set up on this machine), when you open it, it shows Jane Doe then the <applejax.xx> address AND the picture associated with the Apple Jax account.
So the problem shows up when the message is sent to this account from this machine, AND when it is sent from this machine from this account. No other accounts on the machine are effected.
I have sent and received email messages from the mail service provider's website, and everything is fine.

There no lenses listed in the profile selection area. How do I fix this I use canon gear that should

There no lenses listed in the profile selection area. How do I fix this I use canon gear that should be there. Help!

There are different profiles for camera Raw, and for camera JPG - and LR filters the lenses list, to show only the profiles available for the particular image you have highlighted.
If you have selected a JPG image, you will usually see a much shorter or even an empty list of lenses - as compared with what you see if you select a Raw image. Most lens profiles with interchangeable-lens systems, are designed to correct Raw images. On the other hand, if you select an image taken with (say) a compact digital camera or supported cameraphone, any support for that will usually be in JPG.
You can get a free Lens downloader utility from the Adobe Labs website, which gives access to the full library of lens profiles that the general Adobe user community has uploaded. Each one listed, says whether it is for Raw or not. Some of these will have been generated by end users (using another free utility) and are of variable quality. But you may get lucky, and find just what you need. Or, if it is a rarer lens or if you have particular requirements, it is not so hard to make your own profile using the Adobe utility.
You do not need to use a profile made specifically for your camera model. The only limitation is: a crop-sensor-generated profile, will not include the right optical coverage for a fullframe camera model.
Another option is to "kludge" a copy of an existing Raw-only profile, so that it supports JPG instead. This just requires a text editor - you change a line within a structured-text file, from Camera Raw="True", to "False". Then you save that into the Lens Profile folder in the Adobe / CameraRaw area inside your user login's "application data" area.

First time use of a secondhand 3gs; SIM failure (the SIM works fine in other handsets); any suggestions as to how I can fix this?

First time use of a secondhand 3gs; SIM failure (the SIM works fine in other handsets); any suggestions as to how I can fix this?

Hi L.T.D.,
To only answer the question you asked, the answer is yes you can do those specific tasks you mentioned.
My example:
Since you don't want the sentence if A2 is blank you would modify this formula to something like this:
=IF(ISBLANK(A2),"","the patient reports "&A2&" that won't leave.")
I don't see a problem if all you are looking to do is to translate your form or forms into a report. I could even see several different forms reporting to one sheet that tracks their history. It may require a lot of maintenance if there are an increasing number of forms reporting.
Sometimes merged cells create difficulty in Numbers. A mix of popups and checkboxes may complicate things.
I think the previous advice may turn out to be the best, though. You are asking,"If I head this way am I headed to Japan?" I am saying "Yes". They are saying, "You will need a boat!"
quinn

My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working.

My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working. It's only 3 months old and was working perfectly fine 30min before this happened.

Hello Kierasully,
I would start your troubleshooting with the article below for issues of not being able to log in to your Mac. Start with booting up in to Safe Boot as well as resetting PRAM on your Mac. If that does not work, then verify the hard drive with booting to the Recover HD and go to Disk Utility to verify it.
Mac OS X: Gray screen appears during startup
http://support.apple.com/en-us/ts2570
Regards,
-Norm G.

HT5621 I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully und

I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully under me?

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?

When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.

HT6162 My phone will not let me download the most recent update for iOS 7.1. It says I need a wifi connection and will not allow me to push the 'Download & Install' button, even when I am at home and my wifi is on. How do I fix this?

My phone will not let me download the most recent update for iOS 7.1. It says I need a wifi connection and will not allow me to push the 'Download & Install' button, even when I am at home and my wifi is on. How do I fix this?

Unfortunately yes, though technology would never move on if it kept to older standards and did not strive to do more.
The app store always gives you the option to use a previous version of the app IF it is available for your device.
Sorry but you are stuck without new hardware.
PJRS

I've been working on our church website and suddenly, my computer will not connect to the site. I keep getting a message saying that the the connection to the server was reset while the page was loading. Does anyone have any ideas of how I can fix this?

I've been working on our church website and all of a sudden this week, my computer will not connect to the site. I keep getting a message saying that the the connection to the server was reset while the page was loading. Does anyone have any ideas of how I can fix this?

The "The connection was reset" error message can be caused by a bug fix for the BEAST (Browser Exploit Against SSL/TLS) attack that the server doesn't handle.
*[[/questions/918127]]
*[[/questions/918028]]

I need to send an attachment. When I attach it to my email it shows up "open" in the recipients email instead of being an icon type attachment. How do I fix this?

I need to send an attachment. When I attach it to my email it shows up "open" in the recipients email instead of being an icon type attachment. How do I fix this?

once you finalize the addressing the list disappears, so how can is affect the subject . For that matter is disappears when it looses focus.
I have heard of a bug that selects the name that is highlighted when the mouse leaves the selection box if no address is selected. Perhaps that is your issue. Until the issue is fixed I suggest you use tab to leave the address box

I just hear the effects on the track, and the actually vocals are faint. How do I fix this?

Similar Messages

Maybe you are looking for