I keep getting "error occurred while attempting to import file *******. The disc your are attempting to use is full." I have an external hard drive that I moved files over to, but apparently they're also still on my hard drive? HELP!

I keep getting "error occurred while attempting to import file *******. The disc your are attempting to use is full." I have an external hard drive that I moved files over to, but apparently they're also still on my hard drive? HELP!

So you have backed up the content of the computer's hard drive, too?
That usually is a great idea since it is possible to lose use of the system
if parts of it have accidentally been removed or get over-written, or the
main system files get corrupted, when the hard disk drive gets too full.
If you have not trashed the originals of your created content, that remain
after you made copies on an external hard drive or other device, then
that is what you'd have to do to reclaim the capacity still in use by them.
What are specifications of the hard disk drive? The unused capacity
verses the used, in GB? If the hard drive has less than 15 to 20%
free or unused capacity, you could run into trouble. Mine are 40-50%
unused hard drive space, so ample room is available for automatic
Virtual Memory to use that capacity as temporary swap file space.
This is helpful when the computer could use more physical RAM
memory capacity, but doesn't have it. Or if the RAM is maxxed out
and you can't add any more. Virtual Memory is part of OS X and the
system automatically can use as much as is available, but it is better
to be sure there is plenty of resources available to include chip RAM
as well as unused or free hard drive capacity for use as VM.
If for some reason your files in Trash won't go away when you empty
it, you may have to restart. Be sure you have not included any System
files in the content in the Trash, or the Mac may not start up later on.
You may have to boot the computer from the install-restore OS X DVD
and run Repair Disk from its version of Disk Utility, to be sure it's OK.
I'm guessing that by now you know enough about the vintage system
in the older hardware to figure it out, so I won't write about it now.
In any event... hopefully you can simply trash the files, but check them
carefully, & you may need to remove (copy to archive first) even more.
Good luck & happy computing!

Similar Messages

  • I am trying to create a community addition, but just keep getting *Error occurred while saving your data.

    I am trying to create a community addition, but just keep getting   *Error occurred while saving your data.
    Trying to add the following community addtion for:     http://technet.microsoft.com/en-us/library/cc755631(v=ws.10).aspx
    In the above website do NOT copy the command, you have to type it in.  Webpage Error.
    You can use both    dsquery server –hasfsmo schema    and    dsquery server -forest –hasfsmo schema
    The problem is, I believe, a hidden character in the command on this webpage which follows the Paste function and results in the error Unknown Parameter error.

    Hi John,
    You might have better luck posting this in the library feedback forum here:
    http://social.msdn.microsoft.com/Forums/en-us/home?forum=libraryfeedback&filter=alltypes&sort=lastpostdesc
    It seems odd to me that the TechNet library feedback forum lives under the MSDN branding, but that seems to be the case.
    Don't retire TechNet! -
    (Don't give up yet - 12,575+ strong and growing)

  • Keep getting error occurred while formatting the disk using boot camp with usb

    So I keep getting the above error when trying to use boot camp with a USB drive. I have tried with more than one flash drive, all formatted to FAT32, multiple isos, both ripped right from a windows 7 ultimate dvd and downloaded, and I have made sure the iso was unmounted. I have also tried all different combinations of checking the options in the boot camp assistant menu. Any ideas on how to get this to work?

    I was mistakenly thinking of the Fat16 limit. That is my mistake.
    When bootcamp assistant failed to create the USB from my iso disk (with no explanation), I decided to experiment a little with the dd and cp utilities. dd failed, and cp told me the install file was too big.
    The install.wim on my iso is 4,351,019,025 bytes. So even if 4GB is the file size limit, it is too big. 4GB is 4,294,967,296 bytes if I recall.
    If I am still right about the file size, smaller editions of windows 7 would be able to fit on the flash drive, or people can have an actual DVD with windows 7 and install from there.

  • Why do I keep getting error occurred. Please try later again when trying to watch youtube videos

    Why do I keep getting "Error occurred. Please try later again." , eveytime when trying to watch youtube videos. I have the latest adobe flash player and java so why can't I watch videos at youtube??
    It's very, very, frustrating having had so many people tell me I need to change my browser to you guys at mozilla firefox.
    I've tried everything but still cannot view the youtube videos. I have a 32 bit Toshiba laptop.
    God bless, I await your reply,
    Daniele

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • I keep getting an error code while trying to import a cd to my itunes: Error occurred while converting the file. The disc you are attempting to use is full. removing files and emptying the recycle bin will free up additional space.  What does this mean?

    I keep getting this error code while trying to import a cd to my itunes: "Error occurred while converting the file. The disc you are attempting to use is full. removing files and emptying the recycle bin will free up additional space."  What does this mean?

    Well it probably means exactly what it says... How much free space is there on your hard drive where the iTunes Media folder resides? I believe there is also an obscure bug that can occur when software doesn't read the true value of the free space properly, and the workaround is, perversely, to duplicate some content so that with less actual free space the software in question perceives it as more. I've no idea if iTunes is affected by such a bug.
    tt2

  • I keep getting error message, "can't open application PACE because PowerPC applications are no longer supported." I've run Clean My Mac and I still get the error.

    I keep getting error message, "can't open application PACE because PowerPC applications are no longer supported." I've run Clean My Mac and I still get the error.

    Use the Finder "Go" menu while holding down the option key to expose your User / Library folder.
    Look in the Application Support folder for PACE items and delete them.

  • Hello, when trying to insatll itunes on my windows7 pc, I keep getting error occured before installation of  itunes was configured. No mdifications have been made to your computer...itunes

    Hello, when trying to insatll itunes on my windows7 pc, I keep getting error occured before installation of  itunes was configured. No mdifications have been made to your computer...

    Hey AJS4862,
    Thanks for the question. If I understand correctly, you are having trouble installing iTunes on Windows. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
    Issues installing iTunes for Windows - Apple Support
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • I keep getting Error 3252 while trying to download tv shows on my laptop. How can i fix this issue

    like the title says I keep getting Error 3252 while trying to download tv shows on my laptop from itunes what can i do to fix the issue seeing as i can download music with no issue just tv shows are having issue with error 3252

    Contact Epson's support and read the troubleshooting section of their manual - http://www.epson.co.uk/Store/Printers-and-All-in-Ones/Epson-Stylus-SX515W/Driver s-Support

  • I keep getting error 1053 while trying to upgrsde Itunes for PC

    I keep getting error 1053 while trying to upgrsde Itunes for PC

    I was getting -3231 and kept seeing references online about routers and firewalls and connectivity issues.  I merely turned off my WiFi and went hardwired with ethernet and problem solved.  Give it a try and see if it works for you.

  • Image Ultra Builder 4.0: "An error occurred while connecting to server: Check the server"

    Ladies & gentlemen 
    I am using evaluation version of ImageUltra Builder 4.0 for Windows
    XP. Both server and console have been installed on the same machine.
    When I try to add a new repository, then after pressing the final
    "Finish" button I get the message "An error occurred while
    connecting to server: Check the server". 
    This message appears when the service IUServer runs. 
    I have not found any mention of this error neither in the Internet nor
    in the documentation. Can any one suggest what could have been done wrong?
    Thanks, Ilya Druker

    I've had the same problem when trying to generate a database on an external storage unit. When I create a new repository there are two option:
    1) Location: - This is the location where you want to store the files itself. This server does not have to have a database running on it
    2) Server: - This is the name of the server that actually runs the DB2 database that keeps track of the repositories. This server does not have to be the same as the location where you store the files. This could also be the IP address of the server, not necessarily the name.
    The documentation for this is somewhat confusing, but the above stuff works atleast. I have tried in never versions than 4.0 as well.

  • A network error occurred while trying to communicate with the server.

    Hello All,
    I am getting some new error messages when opening the server app on my Mac Mini server running OS X 10.8.2 and Server 2.2.1. First I get a message that says "A network error occurred while trying to communicate with the server." and then after trying to open some of the service panes, I get additional errors that say "Multiple errors occurred on the server while processing commands." The services don't load and I just see "Error Reading Settings" in the server app.
    I started to get these errors when I added a new website to the server. All the services are working fine but I cannot access them in the server app.
    In console I'm seeing these errors when I try to access various services:
    2/24/13 8:02:12.692 PM Server[956]: Error: The server '10.0.1.150' reported an error while processing a command of type: 'readSettings' in plug-in: 'servermgr_dns'. Error: Error Domain=XSActionErrorDomain Code=499 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c4003a760 {NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., originalError=Error Domain=NSURLErrorDomain Code=-1202 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c3f547db0 {NSURLErrorFailingURLPeerTrustErrorKey=<SecTrust 0x7f8c40599080 [0x7fff7711ffd0]>, NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, NSUnderlyingError=0x7f8c3d58c0b0 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk.", NSErrorPeerCertificateChainKey=(
        "<SecCertificate 0x7f8c3f6747e0 [0x7fff7711ffd0]>"
    ), NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., NSErrorFailingURLKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorFailingURLStringKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorClientCertificateStateKey=0}}
    I have already restarted the server and used terminal to stop and start postgres. Any more thoughts on how to repair this?

    Just as I had suspected, the whole GUI crashed because of certificate problems. After two and a half hours with enterprise support, it turns out the com.apple.servermgrd certificate in the server keychain had become corrupt.
    We determined this by typing https://127.0.0.1:311 into Safari and we could see all the server modules and interact with them through the web interface. All the services were working properly as well so we knew that it was just the Server.app GUI that simply couldn't read settings that was causing the problem.
    So, first we closed the server app. Went into /var/servermgrd and deleted all the files from this folder. Then, in Keychain, deleted the com.apple.servermgrd certificate. Did a search for com.apple.servermgrd in Keychain and deleted everything else that came up for it.
    Then restarted the server. Now the server app was able to properly connect to the services in the background and read them properly. This was the jist of the troubleshooting that solved the problem. It also seems like DNS is causing problems because that is the only service that will not read right but is functioning properly in the background.
    I will post an update once Apple figures out what is wrong with DNS. Hope this helps anybody else having these problems.

  • BO CMC Crystal Reports : An error occurred while creating a subprocess in the processing server. [RCIRAS0603]

    Hi All,
    I am getting "An error occurred while creating a subprocess in the processing server. [RCIRAS0603]"  error while opening the previous instances of the crystal report in BOCMC.
    I am trying to run or schedule the report but it is always going to "PENDING STATUS".
    (Previously it was resolved after restarting the server. Error : problem in ProcessingServer)
    Could you please suggest.
    Details :
    Crystal Reports 2008
    Clarity 13
    Server Details:
    BO XI 3.1 SP5
    OS : Red Hat 6
    Patch X11
    Symptom
    " Crystal Reports 2008/2011/2013 Processing Server fails to create child
    processes after applied X11 client libraries security update on Redhat
    Linux 6
    " "An error occurred while creating a subprocess in the processing server.
    [RCIRAS0603]" error occurs when viewing the Crystal Reports in InfoView/BI

    Hi Rajeev,
    This is a known issue you can refer to below note,
    2098659 - "An error occurred while creating a subprocess in the processing server. [RCIRAS0603]" error occurs after applied X11 client libraries security update on Redhat Linux 6
    Regards,
    ~Shree

  • An error occurred while creating a subprocess in the processing server.

    Hi,
    I have developed a Crystal Report using CR 2008 with SAP BW as the datasource. The report is executing fine in CR 2008, but when saved to the BOE, in Infoview it is throwing the following error:
    An error occurred while creating a subprocess in the processing server. [RCIRAS0603]
    Did anyone face similar issue? Is there any resolution for the same.?
    I have deleted the report from enterprise and saved it back, still facing this problem.
    Appreciate your help in this regard.
    Thanks
    Ravi

    Crystal Reports processing (CR Page) server is not operational.
    There could be many reasons for this.
    CR processing server traces will need to be enabled and analysed by support.
    You should also be on the latest patch release.
    Sometimes following steps help :
    1) Stop all of the XI 3.1 processes using the ./stopservers command (ensure they are all down before proceeding)
    2) Once all processes are stopped ensure the serverpids directory is empty
    <install dir>/bobje/serverpids/
    If any files are within the 'serverpids' folder, remove them.
    3) Go to bobje/tmp
    Remove any MW, .MW, mw, .mw and regss files and/or directories
    4) Go to /tmp
    Remove any MW, .MW, mw, .mw, and regss files and/or directories
    5) start servers back up.
    If this doesn't help - you'll need to open a Support Incident

  • An error occurred while trying to communicate with the web browser.

    I have opened a PDF in the Acrobat reader V 8.2.4. It has live links.
    Only the FF browser is open.
    When I click a link in the PDF, I successfully get the message 'The document is trying to connect to...' which I allow and then successfully hyperlink to the web page displayed in FF.
    When I click an image in the PDF, which has a url attached to it, I get the message 'An error occurred while trying to communicate with the web browser.'
    [Sorry to say in IE7 when I click the image, I hyperlink to the web page like I do when I click the link.]
    Question is: What setting or other step do I need to take with FF so when I click the image in the PDF I link to a web page like I do when I click the link in the PDF?
    Thank you!

    Your above posted system details show outdated plugin(s) with known security and stability risks.
    # Adobe Shockwave for Director Netscape plug-in, version 10.2
    # Adobe PDF Plug-In For Firefox and Netscape 8.2.4
    # Shockwave Flash 10.0 r22
    Update the [[Java]] plugin to the latest version.
    *http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    Update the [[Adobe Reader]] plugin to the latest version.
    *http://get.adobe.com/reader/otherversions/

  • Please help me resolve the Lync server 2013 deployment error: "An error occurred while applying SQL script for the feature BackendStore."

    I am getting an error in "Step 2 - Setup or Remove Lync Server Components" of "Install or Update Lync Server System" step.
    "An error occured while applying SQL script for the feature BackendStore. For details, see the log file...."
    Additionally, all previous steps such as: Prepare Active Directory, Prepare first Standard Edition server, Install Administrative Tools, Create and publish topology are done without any errors. The user that I used to setup the Lync server is member of:
    Administrators
    CSAdministrator
    Domain Admins
    Domain Users
    Enterprise Admins
    Group Policy Creator Owners
    RTCComponentUniversalServices
    RTCHSUniversalServices
    RTCUniversalConfigReplicator
    RTCUniversalServerAdmins
    Schema Admins
    I have tried to re-install all the things and started to setup a new one many times but the same error still occurred. Please see the log below and give me any ideas/solutions to tackle this problem.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
    Initializing DbSetupBase
    Parsing parameters...
    Found Parameter: SqlServer Value lync.lctbu.com\rtc.
    Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
    Found Parameter: Publisheracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group;RTC Local Administrators;LCTBU\RTCUniversalServerAdmins.
    Found Parameter: Replicatoracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group.
    Found Parameter: Consumeracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group;RTC Local Read-only Administrators;LCTBU\RTCUniversalReadOnlyAdmins.
    Found Parameter: DbPath Value D:\CsData\BackendStore\rtc\DbPath.
    Found Parameter: LogPath Value D:\CsData\BackendStore\rtc\LogPath.
    Found Parameter: Role Value master.
    Trying to connect to Sql Server lync.lctbu.com\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 2100.
    Sql version is acceptable.
    Validating parameters...
    DbName rtcxds validated.
    SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup validated.
    DbFileBase rtcxds validated.
    DbPath D:\CsData\BackendStore\rtc\DbPath validated.
    Effective database Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath.
    LogPath D:\CsData\BackendStore\rtc\LogPath validated.
    Effective Log Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
    Checking state for database rtcxds.
    Checking state for database rtcxds.
    State of database rtcxds is detached.
    Attaching database rtcxds from Data Path \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath, Log Path \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
    The operation failed because of missing file '\\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath\rtcxds.mdf'
    Attaching database failed because one of the files not found. The database will be created.
    State of database rtcxds is DbState_DoesNotExist.
    Creating database rtcxds from scratch. Data File Path = D:\CsData\BackendStore\rtc\DbPath, Log File Path= D:\CsData\BackendStore\rtc\LogPath.
    Clean installing database rtcxds.
    Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RtcSharedDatabase'****
    Initializing DbSetupBase
    Parsing parameters...
    Found Parameter: SqlServer Value lync.lctbu.com\rtc.
    Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
    Found Parameter: Serveracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group.
    Found Parameter: DbPath Value D:\CsData\BackendStore\rtc\DbPath.
    Found Parameter: LogPath Value D:\CsData\BackendStore\rtc\LogPath.
    Trying to connect to Sql Server lync.lctbu.com\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 2100.
    Sql version is acceptable.
    Validating parameters...
    DbName rtcshared validated.
    SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup validated.
    DbFileBase rtcshared validated.
    DbPath D:\CsData\BackendStore\rtc\DbPath validated.
    Effective database Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath.
    LogPath D:\CsData\BackendStore\rtc\LogPath validated.
    Effective Log Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
    Checking state for database rtcshared.
    Reading database version for database rtcshared.
    Database version for database rtcshared - Schema Version5, Sproc Version 0, Update Version 1.
    Thanks and Regards,
    Thanh Le

    Thanks Lạc
    Phạm 2
    I Had similar issue i end up uninstalling and reinstallting but same issue, then i change the drive but same issue. It was I/O issue. After adjusting my I/O it fix our issue and installation went on without any issue. 
    If any one using KVM here is detail article 
    We just  give this option cache=‘writeback
    using this article http://www.ducea.com/2011/07/06/howto-improve-io-performance-for-kvm-guests/ and http://itscblog.tamu.edu/improve-disk-io-performance-in-kvm/ this fix my issue thanks 

Maybe you are looking for