How to increase the limit of maximim connections that the iMS will accept

how to increase the limit of maximim smtp connections that the iMS will accept & route the mails for specific domain on different mta like iMS will accpet mails on 192.168.1.5|25 & route all @mydomain.com's mails towards 192.168.1.55|25. although I am able to route the mails but to know how to increase the limit of maximum connection & maximum chiild processes per connection.
Thanks

Best thing for you to do is read the tuning guide, found here:
http://ims.balius.com/downloads.php#tuning_guide
Please note, this site does not work with IE. It's not a Sun site, but has the best tuning guide available.
You may end up increasing maxjobs for your channels, increasing the POOL that the jobs are pulled from, etc. It's all well covered in the guide, as are some OS related tuning tips.
Strongly recommended.

Similar Messages

How do I connect my new (purchased last week) macbook air to my samsung smart tv? I purchased the adapter at the apple store and connected to the TV via HDMI cable. The TV says "no signal. I do not see TV as an option in the display tab of system prefer

how do I connect my new (purchased last week) macbook air to my samsung smart tv? I purchased the adapter at the apple store and connected to the TV via HDMI cable. The TV says "no signal. I do not see TV as an option in the display tab of system preferences. what else do I need to do?

First, make sure your TV is tuned to display the correct input signal. Most TVs have several inputs (multiple HDMIs, cable connections, RCA etc) so double-check that you're using the correct one - HDMI1, HDMI2 or whatever is written next to the port.
I assume that you have a mini-Displayport to HDMI adaptor? If you open displays preferences, first tick the box that says "show display preferences in menu bar" then locate the menu and click Detect Displays. See if that helps.
Matt

How do I make my apple id connected to the app store?

I got my sister's ipod touch. I have gone to settings and logged off her apple id account, and logged onto mine. Now, when I went to update my apps in the app store, they asked for the password to my sister's apple id. How do I make my apple id connected to the app store?

- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

I have just bought an ipod classic, I already have an ipod nano. The new ipod was connected to the computer to charge and it named itself with my name on the old nano, how do I get the computer to recognise the new one

I have just bought an ipod classic, I already have an ipod nano. The new ipod was connected to the computer to charge and it named itself with my name on the old nano, how do I get the computer to recognise the new one?

My mistake, it was nothing to do with format. It woldn't sync because my movies were HD. HD movies won't sync to an iopd classic 160 GB but when you purchase a HD movie, itunes gives you a SD vervsion of the movie which is compatible with the ipod. Just needed to go to store, click movies, click purchased and untick the HD box and there you have the SD versions. Download the SD versions and then sync your ipod and bobs you uncle, movies are on the ipod

Am having major issues! this does not work i dont understand..does the ipod have to be off while pressing the buttons if so how is it possible if it is connected to the computer either way it turns on..and when i tried these steps while the ipod was on it

i am having major issues! this does not work i dont understand..does the ipod have to be off while pressing the buttons if so how is it possible if it is connected to the computer either way it turns on..and when i tried these steps while the ipod was on it still doesnt work it just asks me “slide to power off” please someone help me i just cant seem to put my ipod in DFU mode

To get the iPod in recovery mode and DFU mode you first have to turn the iPod off.
Just what is the problem you are tying to resolve?
Sometimes you have to let the battery fully drain if you can't turn the iPod off. After charging for at least hour try again.

How to get the IP of the client when TCP connect in the server

How to get the IP of the client when TCP connect in the server.
The only parameter got from the connection is connectionID.
Solved!
Go to Solution.

I guess you're using "TCP Wait on Listener" on the server. This returns the remote address and port (as optional outputs).

I keep getting the message "mail cannot connect to the server-." when it clearly can and does. How do I prevent these messages from appearing?

See the title
I keep getting the message "mail cannot connect to the server…." when it clearly can and does. How do I prevent these messages from appearing?
help

On your iPad or a Mac?
You posted in the iMac community but your profile indicates an iPad 2.

How can i check my mails on the iphone and make sure that the mail wont pop up again on my computer ?

How can i check my mails on the iphone and make sure that the mail wont pop up again on my computer/ will be deleted on the server ?

For that kind of connectivity you need to be using an email account configured either as IMAP or Exchange.
IMAP & Exchange accounts will maintain a sync across all your devices, so if you read / delete a message on your phone, it will disappear from the server as well. This cannot happen in POP email accounts.
If your using gmail, instructions on how to set up exchange / imap are here http://www.google.com/support/mobile/bin/answer.py?answer=138740&topic=14252
Alternatively, if its anything other than Google, you will need to contact your email providor or IT department (if your email address resides with an enterprise environment) to get the correct settings.
Hope this helps!

The ITS could not connect to the Web Application Server or the R/3 System

Hi Gurus
we are in the process of insalling ITS 6.20 (ITS version is 620010318381 ( itsWindowsX64_31-200001681, R/3 4.7 200)
Actually we installed it for dev/qas server with connectin mode property as "Connect to SAP system Using Applicatin Server" these are working fine for webgui!
and the same thing i installed for Production as connection mode property as " Connect to SAP System Using message Server" (hostname/IP, port as 3600 (as instance number is 00) here in the production evnironment we have 2 app servers. The installation got successful but i am not getting the log on screen through the link: http://10.3.3.175:81/scripts/wgate/webgui!
the error message is :
Connect Error
The ITS could not connect to the Web Application Server or the R/3 System
any help please
Thanks in advance

Hello Balaji,
Check the global.srvc file for errors in the R/3 system information. The ITS uses the following to connect to your system:
~appserver
~routestring
~systemname
~systemnumber
~logingroup
~messageserver
Which parameters are used depend on how you are connecting (logon group, route string, etc.)
Edgar

Does the iPad ignore the volume control when connected to the Digital AV Adapter?

Does the iPad ignore the volume control when connected to the Digital AV Adapter?

The volume limit is preset so yes you are unable to alter the volume on the iPad however you can control the volume on your tv and if you have AirPlay speakers you are able to adjust your volume as well..

Firmware update: "The device is not connected to the USB por

Hi, I have a MuVo TX SE GB and I tried to load the new .22.03e firmware on it with a Windows XP SP2 PC. But when I connected the device, and started the firmware updater, it searched for a minute or so, and then the reset question appeared. I clicked OK and then I heard the USB sounds and the new hardware wizard appeared. I followed the wizard, but when it was installing the drivers, a message: "The device is not connected to the USB port" appeared, and the firmware updater closed. The hardware installed fine. But when I try to load the firmware again, the reset question doesn't appear, but I hear the USB sounds, and i get the same message again. I also tried connecting the player in recovery mode but that doesn't help. The player won't turn on. When I connect it, the player is listed in My computer, but I can't open it. What should I do, and how can I load new firmware properly?

PCkid23 wrote:
Hi, I have a MuVo TX SE GB and I tried to load the new .22.03e firmware on it with a Windows XP SP2 PC. But when I connected the device, and started the firmware updater, it searched for a minute or so, and then the reset question appeared. I clicked OK and then I heard the USB sounds and the new hardware wizard appeared. I followed the wizard, but when it was installing the drivers, a message: "The device is not connected to the USB port" appeared, and the firmware updater closed. The hardware installed fine. But when I try to load the firmware again, the reset question doesn't appear, but I hear the USB sounds, and i get the same message again. I also tried connecting the player in recovery mode but that doesn't help. The player won't turn on. When I connect it, the player is listed in My computer, but I can't open it. What should I do, and how can I load new firmware properly?
I am having the same type of problem trying to upgrade some firmware on my microphoto. I would love to get input from some of the guru's out there , Have you tried emailing customer support and asking them? I am waiting for their repy but just bouncing ideas off the forum in the meantime.

Why my home wifi connection ipad2 enter the password after the password has been wrong? Password is the phone able to connect after the connection is ipa

Why my home wifi connection ipad2 enter the password after the password has been wrong? Password is the phone able to connect after the connection is ipad2 has been an error?

Hello joe2616,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your Wi-Fi network is dropping, please follow the directions outlined below.
Symptom: The network connection drops unexpectedly
Your Mac may not not stay connected to your Wi-Fi network reliably.
Your Mac may stop accessing the Internet during use.
Solution
Use these steps if your computer disconnects from its Wi-Fi network unexpectedly.
Check your range to the Wi-Fi router and reduce the effect of interference.
If your computer is too far from your Wi-Fi router or your environment has too much Wi-Fi interference, then your computer may not detect the Wi-Fi network properly. The easiest way to check for range limits with your Wi-Fi network is to move your computer or your Wi-Fi router closer together and make sure that there are no obstructions (such as walls, cabinets, and so forth) between the router and your computer.See Potential sources of wireless interference for more information about interference and solutions.
Try connecting to a different Wi-Fi network. If your computer works fine when connected to a different Wi-Fi network, then the issue may be related to your network router or ISP. In that case, contact the manufacturer of your router or your ISP.
Wi-Fi: How to troubleshoot Wi-Fi connectivity - Apple Support
Thanks for using the Apple Support Communities!
Cheers,
Alex H.

I cannot get email and the message says the device is not connected to the server

I cannot get email and the message says the device is not connected to the server. How can I resolve this issue?

Hey there Chen_erping,
Thank you for asking your question! It sounds like you are unable to send or recieve email from the account you setup in the Mail app on your iPad. I want to recommend the troubleshooting steps outlined in the following article:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Log in to your email provider's website to ensure that the account is active and the password is correct.
Restart your iOS device.
Delete the affected email account from your device.
Tap Settings > Mail, Contacts, Calendars.
Choose the affected email account, then tap Delete Account.
Add your account again.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Failure sending mail: The transport failed to connect to the server.

Hi I have created Emailsubscription first time in my production server ,am facing this issue ,subscription were not created ,its shows me the follwing error.We did everything fine.
HI I have Configured Configuration settings properly ,
I have did the sMTP settings correctly,
I have facing this error since a long while.
Failure sending mail: The transport failed to connect to the server.
In my log file i have found these are the errors and warnings.
1.library!DefaultDomain!3738!04/23/2015-12:28:38:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
2.library!DefaultDomain!3738!04/23/2015-12:28:38:: w WARN: Initializing UrlRoot to default value of '' because it was incorrectly specified in Configuration file as ''.
3.notification!WindowsService_2!2898!04/23/2015-12:39:29:: e ERROR: Error occured processing subscription 3efe998d-0c40-460e-bc13-00f6c8d0a7f8: Failure sending mail: The transport failed to connect to the server.
4.emailextension!WindowsService_2!2898!04/23/2015-12:39:29:: e ERROR: Error sending email. System.Runtime.InteropServices.COMException (0x80040213): The transport failed to connect to the server.
5. library!ReportServer_0-4!2368!04/23/2015-12:52:30:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: , Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException:
This operation is not supported on a report server that runs in native mode.;
6.extensionfactory!ReportManager_0-3!1224!04/23/2015-12:52:31:: w WARN: The extension Report Server Email does not have a LocalizedNameAttribute.
7.library!ReportServer_0-2!331c!04/23/2015-12:25:41:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: , Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException:
This operation is not supported on a report server that runs in native mode.;
please go through this errors and give me the right soluction to this..
Awaitng for your reply's

Hi Ychinnari,
According to your description, the subscription is failed to send an email with error “Failure sending mail: The transport failed to connect to the server.”.
In your scenario, though you have mentioned you have configured the SMTP and E-mail delivery correctly, please also check those settings according to official documents below to avoid small mistakes:
How to: Configure a Report Server for E-mail Delivery (Reporting Services Configuration)
How to Use Telnet to Test SMTP Communication
Also please check if you have specified the correct E-mail Settings in Report Server Configuration Manager refer to this article:
E-mail Settings - Configuration Manager (SSRS Native Mode).
Finally, please check if you have installed an antivirus on the SSRS server. And check if any firewall role blocks the connection between report server and SMTP.
Reference:
Failure sending mail: The transport failed to connect to the server
SCOM: Report Subscription “Failure sending mail: The transport failed to connect to the server”
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Recently got the new IPad. Every time I try accessing the iTunes store, I get the error message, 'cannot connect to the iTunes store'. Am unable to proceed beyond this. Any suggestion?

Recently got the new IPad. Every time I try accessing the iTunes store, I get the error message, 'cannot connect to the iTunes store'. Am unable to proceed beyond this. Any suggestion?
I bought it in Thailand and am using it in Kenya.

I have the same issue. How did you solve it?

How to increase the limit of maximim connections that the iMS will accept

Similar Messages

Maybe you are looking for