I keep getting the 5103 error...

I tried to download two movie rentals today. They both finished downloading, but when they get to the "Processing File" part, I get the 5103 error message. I followed the troubleshooting steps on it, checked to make sure my iTunes and QuickTime were the current updated versions, my computer is "authorized," and I even restarted my computer.
I'm still getting the same error-code. I've already emailed Support about it, but does anyone else have any ideas on how to fix it?
I'm really hoping it's not my computer; I just picked it up yesterday from being repaired. So I'm hoping it's just iTunes....or am I missing something?

Yeah, but I still have movies that I've downloaded before in iTunes...I just watched one of them, so it looks like iTunes just doesn't like me downloading more right now. :/
And my movies are already backed up. But the rentals aren't there....Should they be there?

Similar Messages

  • I see that there are a lot of people who are experiencing the same problem I am when renting a moving from iTunes.  I keep getting the 5103 error.  Anyone ever receive a solution?  System Clock is set correctly.

    Has anyone ever received a proper response to the dreded itunes 5103 error after downloading a rented movie on iTunes?  What's even worse is that I now can't delete them.  They just show back up when I check for downloads.  This has been going on now for over a month.  Any help is greatly appreciated.

    I found some troubleshooting steps in this article here:
    iTunes Store: Error message 3001, -42110, or 5103 when downloading movie rental
    http://support.apple.com/kb/ts1597
    I hope that helps

  • I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected.  Contact your support personnel or package vendor."

    I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected.  Contact your support personnel or package vendor."

    Yes, I had found a similar solution also.  I'm running XP Pro, SP3.  I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair.  Then run the 10.5 exe.
    While the programme updated from version 8 of iTunes, my new iTunes is now a mess.  Not all of my music was in the same folder previously but it all showed up on iTunes.  Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing.  I haven't begun to work on that.

  • HT201328 after unlocking from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this . Any ideas?? TKS Sandro

    after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
    Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
    The SIM works on a different phone I tested it.
    Any ideas?? TKS Sandro

    “Could Not Activate EDGE” error message Update ...
    Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
    After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
    AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
    When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
    I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
    By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
    Thanks
    Joe

  • I am trying to order a book, I keep getting the same error message," A network error occurred while processing your order, please check your network connection and try again"

    I am trying to order a book with iphoto, I keep getting the same error message.
    " A network error occurred while processing your order, please check your network connection and try again"
    I get the billing part up, it has even uploaded my jpegs but at the final process, I get the same message.
    I have ordered two books a few months ago without any problems.
    Now I keep getting the same message either half way into
    the order or at the final hurdle after the images have been uploaded.
    Any ideas?
    My shared Network has been fine and that does'nt seem an issue.
    Help.

    Try again in a couple of hours - sometimes it is a temp condition
    LN

  • I keep getting the follow error messages when I try to sign into iTunes store or redeem a song code: We could not complete your iTunes store request. The network connection could not be established. There was an error in the iTunes store, please try again

    I keep getting the following error messages on my Mac when I try to redeem a song code: "We could not complete your iTunes store request. The network connection could not be established. There was an error in the iTunes store, please try again later."  and then, "We could not complete your iTunes Store request. An unknown error occurred (-50)."

    Hello, constance132. 
    Thank you for visiting Apple Support Communities. 
    Here are some troubleshooting steps that I could recommend when receiving error -50. 
    "Error -50," "-5000," "8003," "8008," or "-42023"
    These alerts occur due to timeouts or conflicts trying to write a file during download.
    If you encounter this issue while accessing iTunes Store:
    See iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store
    If you encounter this issue while while downloading something from the iTunes Store:
    Delete your iTunes Downloads folder, located in:
    Mac OS X:
  ~/Music/iTunes/iTunes Media/Downloads   Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
    Windows Vista:
  \Users\username\Music\iTunes\iTunes Media\Downloads\
    Windows 7:
  \Users\username\My Music\iTunes\iTunes Media\Downloads\
    Windows XP:
  \Documents and Settings\username\My Documents\My Music\iTunes\iTunes Media\Downloads\
    After locating your iTunes Downloads folder:
    Quit iTunes.
    Delete the Downloads folder on your computer.
    Open iTunes.
    Choose Store > Check for Available Downloads.
    Enter your account name and password.
    If you encounter this issue while while downloading Digital Copies using Windows:
    Use MSCONFIG (directions for Windows XP and Windows Vista/Windows 7) to disable conflicting software.
    If using MSCONFIG steps resolves the issue, you may want to use the System Configuration Utility to turn on the third-party System Services and Startup Items one at a time (restarting your computer after turning on the item or items) to identify which System Service or Startup Item is causing the conflict.
    You can turn all of them back on by selecting the Normal Startup option under the General tab of the System Configuration Utility window, but please note that this may cause the issue to reoccur.
    If you are able to isolate the issue to a particular third-party software, you may wish to contact them to let them know of the conflict.
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Cheers,
    Jason H. 

  • I am running Windows 7  and trying to update to iTunes version 10.5 (from version 10.3.1.55) and I keep getting the following error message, 'Error occurred while installing the updates. If the problem persists, choose Tools Download Only and try instal

    I am running Windows 7 home edition and trying to update to iTunes version 10.5 (from version 10.3.1.55) and I keep getting the following error message, ‘Error occurred while installing the updates. If the problem persists, choose Tools > Download Only and try installing manually’ which I do only to have the same error message pop up.

    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • I am trying to send an iMovie project to iDVD and I keep getting the following error msg.  "Unable to prepare subject for publishing:  The project could not be prepared for publishing because an error occurred. (-43)"

    I am trying to send an iMovie project to iDVD and I keep getting the following error msg.  "Unable to prepare subject for publishing:  The project could not be prepared for publishing because an error occurred. (-43)"

    Check out this thread: https://discussions.apple.com/thread/1421870
    It may mean you either your Event or your Project. Have you moved any of the files in the Finder by any chance? That error may come up if you moved anything outside of iMovie. Do you get an error message when you choose Share>Export to iMovie (choose medium size) and save it to the Desktop? If you can export it to the desktop, you can pull that file into iDVD separately and still make it work.

  • I keep getting the following error message while sharing my iMovie to iDVD.  "Unable to prepare project for publishing"  error (-2125).

    I keep getting the following error message while sharing my iMovie to iDVD.  "Unable to prepare project for publishing"  error (-2125).  I'm running iMovie 09 v. 8.0.6 on a iMac with OSX v 10.6.8, 2Ghz core duo, 1GB 667 Mhz DDR2 SDRAM.  Any ideas why?

    That particular error comes up for a number of reasons, sometimes it's the size of the movie you're trying to export. Bengt Wärleby a longtime contributor to the iMovie Discussion Group has advised a number of people on this error code, so I am going to link to his latest advice he's given to anyone trying to export to DVD from iMovie: Bengt's tips for great DVDs.
    Specifically, try bypassing Share to iDVD by using Share to Media Browser instead.
    In the Share to Media Browser dialog box choose the Large Size.
    When(If?) it gets through that process, quit iMovie altogehter then go to iDVD.
    Create a new project and click on the Media button near the lower right hand side of the Project Window.
    Then click the Movies button in the Browser window just above that.
    Under the iMovie star icon you should see the name of the project you shared out from iMovie.
    Drag that into the project and burn the DVD.
    If it's still to large or you get the same -2125 error code trying to Share using the Medium size instead. But again if you really get stuck consult Bengt Warleby's User tips:
    Bengt's tips for great DVDs

  • I keep getting download error and it does not want to download.  I tried deleting anything that might have creative suite links and reloading but I keep getting the same error message.

    I keep getting download error and it does not want to download.  I tried deleting anything that might have creative suite links and reloading but I keep getting the same error message.

    Well... what IS the error message?
    Please read https://forums.adobe.com/thread/1499014
    -try some steps such as changing browsers and turning off your firewall
    -also flush your browser cache so you are starting with a fresh browser
    http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
    http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • I keep getting the -1 error when trying to restore?

    So I'm trying to restore my iPhone 3GS but I keep getting the -1 error in iTunes.
    I have tried putting the iPhone in dfu mode but had no luck.
    Can anyone help?

    https://discussions.apple.com/message/23298645#23298645
    more
    https://www.google.dk/search?q=iphone+restore+error+1&oq=iphone+restore+error+1& aqs=chrome..69i57j0l5.6429j0j7&sourceid=chrome&espv=210&es_sm=93&ie=UTF-8

  • I keep getting the following error message---"We're sorry but the Safari browser version you are currently using does not support the community toolbar."

    When I log in I get this message I keep getting the following error message---"We're sorry but the Safari browser version you are currently using does not support the community toolbar."
    Also, I can seem to down load my Adobe Flash, I did download what I thought was the correct down load for Safari, but I'm still getting this message "We're sorry but the Safari browser version you are currently using does not support the community toolbar."  I was even going to purchase the Leopard for 29.99 to see would this solve my problem but I want to purchase another pc and sale this one, can you help me?
    Thank you

    See this link.
    Also look at More Like This on the right side of these pages for realted threads on this topic (and on the pages those link to).

  • I cannot run itunes, I keep getting this error message" Quick Time failed to initialized (error02096) Quick time is required to run please unistall itunes then install itunes again, I have done this three time and I keep getting the same error message.

    On my PC, I cannot run itunes, I keep getting this error message" Quick Time failed to initialized (error02096) Quick time is required to run please unistall itunes then install itunes again, I have done this three times and I keep getting the same error message. I have had itunes for years, but up until 2 months ago the quick time will not initialize to run it.

    Try using the Windows Installer Cleanup Utility and delete the iTunes installer. Then try installing iTunes again
    http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html

  • I have been trying to publish my podcast to iTunes with no success – I keep getting the following error message

    I have been trying to publish my podcast to iTunes with no success – I keep getting the following error message
    We could not complete your iTunes store request. You do not have enough access privileges for this operation. There was an error in the iTunes store. Please try again later.
    New to all this and would really appreciate some help.
    Thanks in advance
    PS: I should say that I have an ITunes account - I have full permissions over the website etc. I am using Powerpress plug in on a wordpress site.

    My guess would be that you've fallen over a glitch in the Store, in which case all you can do is wait a bit and try again, but it is only a guess. Without being able to look at your feed it's not possible to say whether there might be a problem there.

  • I am trying to load iTunes and keep getting a error 126 and reinstall program.  I have uninstalled and reinstalled twice and keep getting the same error message.  How can this be resolved.

    I am trying to load iTunes and keep getting a error 126 and reinstall program.  I have uninstalled and reinstalled twice and keep getting the same error message.  How can this be resolved?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

Maybe you are looking for