I keep losing my printers from the network

Yep. This has been going on since I did a full restore to my MacBook. I keep losing the connection to my two wireless printers. I go to print and and the printer que says that the printers are not connected. Then, amazingly enough, they get reconnected, sometimes by themselves and sometimes with me deleting and reinstalling.
BUT, when this happens I find that the other two computers on the network are not affected. So it seems an OS problem. (?)
I am using Time Capsule 2T for network.
Best,
Eric

they are downloaded through "media overdrive" and "media on demand", I am therefore assuming they are formated correctly. I am told that the problem is with the settings, but do not know which settings.

Similar Messages

I keep losing volume output from one of my tracks (Strings) in GarageBand. The volume has gone completely from the whole track when I send the song to iTunes-can you help?

I keep losing volume output from one of the Tracks from my Song Project. The Strings volume, at first, was there but, when I sent the Song to my iTunes Library the strings volume was absent. Can any help? I've experience this before on another project, where for some unknown reason I've lost the Orchestral Choir volume. Sometimes, if the volume on a track disappears, I close everything down & then restart-this temporarily sorts it out but losing a track in the final mix is a different problem...please help!
Many thanks!!

soulkiss wrote:
I need the vocals to be the same volume throughout.
a good tool for that would be one of the compressors (a web search on "audio mixing compressor" will yield tons of information on using them)
soulkiss wrote:
It always exports at the audio level no matter what.
http://www.bulletsandbones.com/GB/GBFAQ.html#tooloud
(Let the page FULLY load. The link to your answer is at the top of your screen)

Is there a way to keep my Mac Pro On the network without sleeping???

i'll try to explain this the best way I can. I often wish to access my Mac Pro over the network either for file sharing, or for use with Apple Remote Desktop. The problem is after about 20-30 minutes, the Mac Pro sleeps and disappears from the network. Is there a way to keep it on the network without turnig off sleep mode? I really don't want the hard drives working 24/7 if possible....
Thanks in advance!
JPT
P.S. I'm sure it doesn't matter, but just in case..I'm using the new Apple Airport Extreme base station.

In the Energy Saver pane of System Preferences, check the 'Wake for Ethernet network administrator access' checkbox under the Options tab, and then use an application such as this one to send it the signal.
(19902)

SOLUTION to your HP printer going offline and/or constantly disconnecting from the network

If you are having a problem printing, scanning or faxing with any HP Printer because of it going offline and constantly disconnecting from the network, here is the fix!
I figured this all out after many unsuccessful attempts with HP Support, my Internet Service Provider and various troubleshooting tasks including reinstalling HP software over and over and over. Well, through self teaching on the internet and 6 grueling months of research, I FINALLY figured it out. OMG! I am a Paramedic (not IT) and somewhat computer literate but by far no expert. I here all of you! Nobody seems to have the answer but I am 97% sure that I do. Either way, please reply back and let me know that this did in fact work for you! :-)
It doesn't matter if your printer is installed wirelessly or wired. Don’t worry about reinstalling your software, no recycling your printers’ power or your Router/Modem. The reason your printer is unstable on the network and continues to either go offline or disconnect from the network is NOT because the software is glitched, it’s not a firewall problem per say, it’s not a router problem, there isn’t a problem with your power cord, it’s because most networks use a “range” of IP addresses and for security purposes, it sort of “cycles” the various devices’ IP addresses to decrease the chance of an attack. A printer is no threat but the “network” doesn’t possess human intelligence so it doesn’t know this. Below are my step by step instructions on how to basically make your printer hold its IP address (static IP) instead of changing back and forth through a cycle therefore dropping your printer off the network or disconnecting.
Funny, if you are someone who has had items in your print cue, they won’t print, and you turn your printer off and then back on and suddenly your documents print…well, join my club. The reason this works is because when you first turn on the printer, it starts with the same IP address before it cycles. If you are someone who sits there for a while and suddenly your documents print without you changing anything…this is because through the IP cycle change, it hits your printers IP address and the network will allow it to print. Not very funny, I know. It took me forever to figure out why my printer would print sometimes but not all the time. Since I figured this out, I can SCAN, PRINT and use all of the features of my installed HP software such as HP Solution Center, Photosmart Essentials.
On your printer, go to menu/setup/network and press OK. Inside the network menu, print a "network configuration page" so you can see the IP address and other settings for your printer.
Now, go back to main menu on your printers’ screen. Or you can go to your web browser and type in the IP address using the decimals too and this will take you to your printers’ web page. Choose: setup\network and press OK. Look for IP settings and press OK. Choose "manual" instead of "automatic". Enter the IP address there manually as well as the default gateway which you can see on the network configuration page that you printed earlier. Note: If you manually set the printer's IP, make sure that it is outside of your router's DHCP range. Otherwise you may run into an issue with duplicate IP's on your network. (If you don’t know how to do this, write back and I will explain). Don’t forget to click “save changes”. Now, restart your computer and print anything you want. :-)
A trick I often use with printers in DHCP networks:
In Printers and Faxes right click on the printer and select “properties”. Click add a new port. Choose standard TCP/IP port configured to the printer host name. Read the hostname from the printer's network configuration sheet.
Using my method means that you always connect to the printer even if its IP changes (which may happen with dynamic configuration). This does not jeopardize your network security. It just tells your printer to stay put and stop traveling the IP address highway. :-)
This question was solved.
View Solution.

The DHCP range is the range of IP addresses the router hands out automatically as devices join the network. The DHCP range is determined by the router and each brand has a range set at the factory (that can be changed by you).
Your D-link's DHCP default range is 192.168.0.100 to 192.168.0.199. So, outside the DHCP range is .2 to .99 and .200 to .254.
Attached is a handy cheat sheet.
You can change this range by entering the router's settings page - type the router's IP address into a browser, enter the login info and navigate to the DHCP settings area (varies based on router, hunt around).
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP
Attachments:
Router Facts.pdf ‏25 KB

I am having problems installing new software for my ipod i keep getting a message that the network has timed out. I have tried two different computers and networks what else can I do?

I am having problems installing new software for my ipod
I keep getting a message that the network has timed out.
I have tried two different computers and networks what else can I do?

Try temporarily disabling your firewall and anti virus software and try again...
See here for Connection Issues
http://support.apple.com/kb/TS1379
From Here
http://www.apple.com/support/itunes/troubleshooting/

I am have trouble with 2 new 21.5" iMacs losing wifi connection from my network. I have 4 other vintage iMacs that never lose connection. Please help.

I am have trouble with 2 new 21.5" iMacs losing wifi connection from my network. I have 4 other vintage iMacs that never lose connection. Please help.

This subject has been talked/written about a lot, after Lion was introduced. A solution from Apple has not yet been published, everybody is waiting.
Try for instance https://discussions.apple.com/thread/3734081?start=15&tstart=0, but there are more discussion groups with the same subject: frequently lost WiFi-connections in newer Macs running Lion or up.

How can i do a RMAN backup of my database from the network ?

i'm using oracle 8i.1.7.3 with win server 2003
i want to know how can i do a RMAN backup of my database (sever machine A) from the network.
i'd like to save the backup in another machine (the same LAN, the same OS ).
to do that i've mapped a logical device in my comptur (z):
when i run rman command i got this error:
channel ORA_DISK_1: starting piece 1 at .......
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command ON ORA_DISK_1 channel at .......
00
ORA-19504: failed TO CREATE file "\\remote\save\"
ORA-27040: skgfrcre: create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 123) The filename, directory name, or volume label syntax is inco
rrect.

Hi,
ORA-19504: failed TO CREATE file "\\remote\save\"make sure you have created this directory and change it's ownership (chown command)to oracle.
also make sure that oracle user has permission to write to this direcotry (chmod command)
hope this helps
cheers, walrus

Weird: Backup file works fine from the network but not when moved into sandbox environment

We have a valid full backup of a database. We know it is valid, we have restored it twice from the network with no problems, but we do not have access to the network location from our sandbox environment.
The .bak file is sizable at about 9GB. The .bak file resides on our internal network, in a SAN drive. No problems there. When we copy the file from there into a sandbox environment to attempt the restore in the sandbox environment it gets corrupted. We've
tried three different times and all three different times it gets corrupted. First time we copied the file over to the sandbox the restore went up to 50% and failed. The second time we copied the file again and attempted the restore again it failed at 70%.
The third time it failed at 60%. The error message we get during the restore is "...Read on ... failed: 13(The data is invalid) Msg 3013, Level 16, State 1, Line 1 Restore database is terminating abnormally."
Now some background here. To move the file our network team is doing this: they have this .vmdk file that they mount out in our production environment (which has access to the network location where the .bak file is), copy the file into the drive, then move
the .vmdk file into the sandbox environment(which does not have access to the network location), mount the drive in the sandbox environment, and then I have access to the .bak file from within the sandbox environment.
Something in the process of using the .vmdk file to move the .bak file from production into the sandbox is causing the file to get corrupted.
Any thoughts? Has anyone seen this before? Any idea? TIA,
Raphael
rferreira

Original server that generated the .bak file:
Microsoft SQL Server 2008 R2 (SP1) - 10.50.2550.0 (X64)
Jun 11 2012 16:41:53
Copyright (c) Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
Server where I CAN restore the .bak file from the network location (not inside the sandbox):
Microsoft SQL Server 2012 (SP1) - 11.0.3128.0 (X64)
Dec 28 2012 20:23:12
Copyright (c) Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
Server inside the sandbox where I get the error when attempting to restore the backup:
Microsoft SQL Server 2008 R2 (SP1) - 10.50.2550.0 (X64) Jun 11 2012 16:41:53 Copyright (c) Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
rferreira

I have two iTunes accounts and was wondering if i can merge them together. I've a new macbook pro and haven't plugged my iPhone in it yet in fear of losing my songs from the previous account.

I have two iTunes accounts and was wondering if i can merge them together. I've a new macbook pro and haven't plugged my iPhone in it yet in fear of losing my songs from the previous account.

Go to the Music section of your Library (very top-left corner) and see if your songs are there. The "Purchased" playlist may have been deleted or gotten corrupted, but if that happens it's not a big deal because your music should still be in your main Music Library.
If your music is NOT in the Music section of your Library, then go to the iTunes Store homepage and find the Quick Links list on the right side. At the top of that list, click Purchased and you can redownload all of your previous content that you might have lost.

Error while executing SSIS package - Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)

Hi,
We are getting the following error when running our SSIS packages on Microsoft SQL Server 2012 R2 on Windows Server 2008 R2 SP1:
Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)
SQL Server Data Tools and SQL Server Database Engine reside on the same server.
We tried the following:
Disabling TCP Chimney Offload
Installed Windows Server 2008 SP1
Splitting our SSIS code into multiple steps so it is not all one large continuous operation
The error occurs during a BulkDataLoad task.
Other options we are investigating with the engineering team (out-sourced, so delayed responses):
Firewall configurations (everything is local, so this should not make a difference)
Disabling the anti-virus scanner
Are there other things we can try?
Any insight is greatly appreciated.
Thanks!

Hi HenryKwan,
Based on the current information, the issue can be caused by many reasons. Please refer to the following tips:
Install the latest hotfix based on your SQL Server version. Ps: there is no SQL Server 2012 R2 version.
Change the MaxConcurrentExecutables property from -1 to another one based on the MAXDOP. For example, 8.
Set "RetainSameConnection" Property to FALSE on the all the connection managers.
Reference:
https://connect.microsoft.com/SQLServer/feedback/details/774370/ssis-packages-abort-with-unexpected-termination-message
If the issue is still existed, as Jakub suggested, please provide us more information about this issue.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

When I try to print sth I can´t choose my printer. Adobe Reader only shows a printer I used years ago.I aleady deleted and reinstalled the Reader and deleted all other printers from the computer.How can I add a new printer to Adobe Reader?Thanks for help!

When I try to print sth I can´t choose my printer. Adobe Reader only shows a printer I used years ago.I aleady deleted and reinstalled the Reader and deleted all other printers from the computer.How can I add a new printer to Adobe Reader?Thanks for help!

Hi,
I would suggest you to uninstall Adobe Reader using the cleaner tool and then re-install the latest version.
Adobe Cleaner Tool:- Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs.
Latest version of Adobe Reader:- http://get.adobe.com/reader/
If you still experience the same issue, please share the following information:-
- Screenshot of Adobe Reader showing printer options
- Screenshot of Microsoft Word showing printer options
- Screenshot of control panel- Control Panel\All Control Panel Items\Devices and Printers
Regards,
Nakul

Flex 2 14 periodically disconnects from the network on Wi-Fi.

My brand new Flex 2 14 periodically disconnects from the network on Wi-Fi. This is pretty unacceptable. Other PC's in the house are not experiencing the problem, so it's difficult to blame the router.,
I have a Broadcom 802.11N Network Adapter device with driver version 6.30.223.201, which is the latest on the Lenovo site. I am running Windows 8.1, as provided on the system. I've installed Windows updates and some other software, but have not otherwise changed the OS.
I have seen other users with similar problems, but no fixes for Broadcom.
Any ideas anyone? May be a "back to lenovo" thing.
Moderator Note; subject edited
Solved!
Go to Solution.

I called Lenovo Tech Support and they had me try something that seems to be working. Apparently there are *two* drivers available for the Broadcom 802.11n Network Adapter: one published by Broadcom, one published by Microsoft. My system *was* configured to use the Broadcom driver, Lenovo Tech support had me change to use the Microsoft published driver. I have not had a disconnect since.
To change the selected driver:
0. Make sure you have the latest drivers from the Lenovo support site installed.
1. Launch "Device Manager"
2. Expand "Network adapters"
3. Right-click on "Broadcom 802.11n Network Adapter" and select "Properties".
4. In the properies window, select the "Driver' tab and click "Update Driver..."
5. In the update window, select "Browse my computer for driver software"
6. On the next page, select "Let me pick from a list of device drivers on my computer"
7. On the next page, you should have a choice of selecting from one of two drivers. Select the one from *Microsoft*.
8. Click "Next" and complete the driver install.

Oracle Personal Edition (disconnected from the network)

Hello everyone,
I have oracle PE 10.1.0.2 installed on my laptop (running windows xp pro sp2). I have the laptop connected to the network most of the time. Yesterday, I was trying to access my database while I am in the coffee shop but I couldn't. I was getting a "no listener" error from the application I am using. I took a look at the running services and I found out "OracleDBConsoleorcl" and "OracleServiceORCL" did not start. I tried to start them. But I was getting a type 2 error. tried to reboot. no good
When I connected my computer to network, I was able to connect to the database from my application and from the enterprise manager.
I searched this forum and I found out that I need to configure a loopback adaptor if Oracle DB is installed on a DHCP computer. In my case, I am disconnected from the network. Would a loop back adaptor fix the issue? Would it cause any problems when I connect back to network? In another word, would the database listener and OracleServiceORCL services work if I am connected and disconnected from the network?
Thanks for the help

I do not have Personal Edition, but if you can a check, make a copy/backup, and then change the entries in $ORACLE_HOME\sysman\config
$ORACLE_HOME\sysman\config\emoms.properties $ORACLE_HOME\sysman\config\emd.properties
and any httpd configuration files in that directory.

How to resolve "The server is unavailable and could not be accessed. The server is probably disconnected from the network." error in Sharepoint serach crawl.

Hi all,
I have created a content source in Search service application for a particular site collection "http://spwebapp/sites".
I performed reset crawl index of Search service application and then performed a full crawl.
But i get errors on running crawl on this content source for most of the files. The error is "The server is unavailable and could not be accessed. The server is probably disconnected from the network." Though the site is accessible.
But before performing reset index the crawl was working fine on this content source. Crawl is working fine for other site collections. Only one site collection is facing this problem. Please let me know if what I can do to resolve this error.
Thanks in advance.

Are you seeing any error messages in the URL related to the Gatherer? And in your content source, are there any site URLs that are no longer active or do you have any crawl rules set up that might be affecting access to the site collection?
I've seen this happen for a variety of reason, SSL issues, proxy issues, permissions issues. The Eventvwr and ULS logs should help you narrow down the real problem.
Sometimes this is an issue because the indexer and the site are sitting on the same box, you could try doing a disable loopback check to see if that resolves the issue and if it does then go through the hassle of setting up a specific LSA :
http://iedaddy.com/2009/04/sharepointdisable-loopback-check/
ieDaddy
Blog: http://iedaddy.com
Twit: @iedaddy

I have a new lion server and 4 lion laptops. The laptops loose connection to the shared documents and printers from the server after roughly 1 hour. By disconnecting and re-connecting wireless the connection is regained to shares and printers

I have a new lion server and 4 lion laptops. The laptops loose connection to the shared documents and printers from the server after roughly 1 hour. By disconnecting and re-connecting wireless the connection is regained to shares and printers. We can still surf the web when it goes down.

Ok 1st one. The warning restriction message relates to this line in main.cf:
smtpd_helo_restrictions = permit_sasl_authenticated permit_mynetworks check_helo_access hash:/etc/postfix/helo_access reject_non_fqdn_hostname reject_invalid_hostname permit reject_invalid_helo_hostname
The last reject occurs after the single word "permit" and is ignored.
However, that's not the problem.
I'm not exactly sure what's happening, but this might be a clue.
It would appear that either postfix is not being able to create the socket for private/policy or it's somehow created with the wrong permissions. You might need to ramp up the debug level to get a better idea.
You could check if it's being created by "netstat -a | grep private/policy" in terminal.
My guess is that it's not being created because there is no setup statement in your master.cf file, but I don't understand why postfix would be looking for it if it isn't set up. Private/policy I think relates to grey listing. Maybe gives you a hint.

I keep losing my printers from the network

Similar Messages

Maybe you are looking for