I know it's old but CS4 Bridge will not open 5d Mark II files...oh man.

Okay, I know this horse is dead but I just cannot figure it out. Adobe says to drop the raw converter file in: Navigate to Library/Application Support/Adobe/Plug-Ins/CS4/File Formats. The problem is, when I get to Adobe, there is no Plug-Ins folder. That's the step where I am stuck. I'd appreciate the help and feel free to contact me offline. Thanks.

> Your post is totally blank —as are many messages sent to this POS forum by email.
I've had posts void of content but it's only been here that they've been completely blank. Couple this with the fact that RSS randomly drops messages and my enthusiasm for the Adobe forums continues to wane.
Here's what I tried to post. Thunderbird, fortunately, saves outgoing mail in a sane fashion.
> -- as the tilde ~ is unfortunately often associated with the +username folder+.
>
... correctly associated with the +username folder+ by any sane definition. I didn't mean to imply that that the ~/Library path was the correct one I was just comparing it to the /Library path.
> In any event, folks who get it wrong are just as susceptible to miss any of those variants.
>
Prolly right on that point. I've written enough installation instructions and regardless what they are, someone will get confused. Vista's new layout hasn't helped and I'm sure things won't improve with Windows 7.
> Nothing beats a screen shot, though.
>
Have to agree with you there.
-X

Similar Messages

Mac CS6 Bridge will not open

I know this has been discussed a lot on the forums and I have read all of those, but I am frustrated after 3 weeks of working on this. I bouht my wife Photoshop CS6 for xmas and loaded on our iMac running 10.8.2. She was running Elements 8. CS6 Bridge will not open. Get a message "operation can not be completed". It will also not open from inside Photoshop either. Following other posts, went into Library and deleted switchboard folder, plist files, and other listed files. Did an option start on CS6 and reset to factory, delete thunbnails. Performed PRAM and disk permissions repair. None of this has fixed the problem. The only thing that works is creating a new user account. Bridge opens fine in my test account. Next step is to make test account the main account; however, this is going to be a pain. Any other ideas before I undertake this?

Looks like you have tried all the suggested methods, so good job on that. Your solution to create a new account is one that has worked for many where nothing else has worked. This usually means some permission or default setting has not been affected by your actions.
The only suggestion I can offer is to uninstall CS6, run Adobe Script Cleaner, then reinstall. Hope this works.

Bridge will not open after update.

Adobe Updater did its update and now Bridge will not open. The message is:
The Application Bridge CS3 quit unexpectedly.
I have had to uninstall Photoshop, reinstall photoshop, and then all is well until the Adobe Updater gets going then bang! No more Bridge. The below is the first part of the Apple report.
Any ideas??? Im running 10.5.5 10gigs of ram, on a 8 core Mac.
Process: Bridge CS3 [405]
Path: /Applications/Adobe Bridge CS3/Bridge CS3.app/Contents/MacOS/Bridge CS3
Identifier: com.adobe.bridge2
Version: 2.1.1.9 (2.1.1.9)
Code Type: X86 (Native)
Parent Process: launchd [94]
Date/Time: 2008-10-08 15:53:31.578 -0700
OS Version: Mac OS X 10.5.5 (9F33)
Report Version: 6
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Crashed Thread: 0

Routine maintenance is imperative.
I still advocate Repairing Permissions (with Apple's Disk Utility) before AND after any system update or upgrade, as well as before AND after installing any software that requires an installer that asks for your password.
I have seen software installations go sour because the installer did not find everything as and where it should be.
I have also seen software installations go bad because the installer did not clean up after itself properly and did not leave everything as and where it should be.
This is just my own personal opinion and practice based on my own observations. Others may disagree and that's OK. I can only base my routines and my advice to others on my own experience and conclusion. I don't pretend to know why others believe otherwise.
Repairing Permissions after the fact (i. e. not immediately before and after an install) seldom helps.; Try it anyway, though.
====
Additionally, if your machine does not run 24/7 so that it runs the daily, weekly and monthly Cron Scripts in the middle of the night as intended by Apple, run Cocktail (shareware) as well.
Cron Scripts are maintenance routines designed by Apple to run on a daily, weekly and monthly basis in the middle of the night.
If you don't run them, you WILL run into trouble, sooner rather than later.
Here's an excerpt from the Apple tech doc
http://docs.info.apple.com/article.html?artnum=107388
Mac OS X performs background maintenance tasks at certain times if the computer is not in sleep mode. If your computer is shut down or in sleep at the designated times, the maintenance does not occur. In that case, you may want or need to run these manually.
Mac OS X periodically runs background tasks that, in part, remove system files that are no longer needed. This includes purging older information from log files or deleting certain temporary items. These tasks do not run if the computer is shut down or in sleep mode. If the tasks do not run, it is possible that certain log files (such as system.log) may become very large.
Also, from:
http://docs.info.apple.com/article.html?artnum=106978
The disk activity generated by find is a normal part of file system maintenance, used for tasks such as removing invisible temporary files that are used by the system. It is scheduled to occur early in the morning at 03:15 everyday, 04:30 on Saturdays, and 05:30 on the first day of each month.
NOTE:
There have been comments to the effect that Apple "fixed" this in 10.4.2 and later versions of the OS, but I have not been able to verify this to my satisfaction. The reference in the 10.4.2 release notes are far from explicit on this subject.
= = =
If you have DiskWarrior, run it regularly too.

I upgraded from PS5 to PS 6 and Bridge will not open in RAW, AMT Failure, also will let me update

I upgraded from PS5 to PS 6 and Bridge will not open in RAW, AMT Failure, also will not let me update and closes Bridge down.
I have uninstalled and reinstalled 3 times and still no success. Any suggestions?

What system are you on? Did you run the Creative Suite Cleaner Tool inbetween your install attempts? If not, try that to produce a "clean" install with factory defaults. Other than that there could be some specific system issues at play, but again, we'd need to actually know what system you are on...
Mylenium

Bridge will not open after upgrading Reason: Incompatible library version OSX 10.6.8

I decided I would upgrade Bridge CC today, and it turns out that was a very bad idea. I have a ton of work and Bridge will not open. I can't revert back to the older bridge CC.
PLEASE HELP!!!
Reason: Incompatible library version: dvanet requires version 7.0.0 or later, but libcurl.4.dylib provides version 6.0.0

I decided I would upgrade Bridge CC today, and it turns out that was a very bad idea. I have a ton of work and Bridge will not open. I can't revert back to the older bridge CC.
PLEASE HELP!!!
Reason: Incompatible library version: dvanet requires version 7.0.0 or later, but libcurl.4.dylib provides version 6.0.0

CS5 Bridge will not open, Air will not install, and AAM Updater will not update. Please help!

I am having several problems with CS5, and as best I can tell they all seem to be related. I purchased CS5 about a month ago. Photoshop has opened and ran fine. However, recently AAM notified me some several updates available. When I tried to update them they all failed. This lead to the discovery that Bridge will not open at all, Air installs but with an error and cannot update itself or applications like Adobe Help, and since the AAM updater ran it now thinks everything is up to date.
I have search endlessly for every piece of information I could find on this issue. As well as, sat on the phone with tech support for hours. As best I can tell, (and really I have no evidence to support me), it seems to all be related to a permissions issues. However, I have tried everything the forums suggested with no luck, and Tech Support ended with me doing an Uninstall and reinstall (twice), while repairing permissions in-between. I am about at the end of the road with this issue and would greatly appreciate any additional suggests you could offer.
Some additional details.
Running a MBP i7, 8GB RAM, and MAC OSX 10.6.4
Bridge Issue,
     When attempting to launch Bridge it simply returns an error "This operation could not be completed..." I tried the option click and reset method, no luck.
Air Issue,
     Kind of works, but at the same time doesn't. In that in one of the previous installations programs like Adobe Help would not run. Now Help does run, however, when I go to update Air it says it completed successfully but then immediately gives me an error saying "~this may not be allowed by the administrator..." I also cannot update Adobe Help, it just sits and says preparing to update.
AAM Updater Issue,
     This appeared to work fine until I attempted to install an update. It downloaded everything and then failed on the install. However, now it thinks everything is up to date, but nothing is.

Well despite not getting much love on this forum. I was able to correct the problem. I tried every solution that google would produce on these issues. Ultimately it came done to permission issue. I was lead to this fix by a person on flickr that suggested permissions as the cause. However, his solution was to modify the permissions in the home directory root and apply them to every subsequent folder in the home directory. Although quick and easy, I felt this would lead to more trouble then it was worth.
I did some more digging and what I discovered is that all the permission of the Adobe folders in the home directory library (not the HD library) and the application folder did not match all the other folders in those areas. Some of the files in some of the folders did not match either. So I made them match (the ones that matched I left alone), and everything seemingly went back to working normally. It was a bit of a pain going folder by folder. Fortunately there where not many of them. About 8 in total, plus the internal folders.

Bridge will not open [was:jack leggett]

bridge will not open purge cashe but the wheel in bottom left corner still spins for ever I have to false quite to be able to get out

The only way to purge cache without opening is the reset preferences.

I successfully installed Adobe Digital Edition but the application will not open

I installed Adobe Digital Edition for Windows on a Windows 7 PC. It successfully installed, but the application will not open. I double click on the icon and it gives the borders, but never opens. I have waited 30 minutes and still nothing.

It is on Windows 8.
From: shreya <[email protected]>
To: Marilyn Kelly <[email protected]>
Sent: Thursday, March 26, 2015 1:06 AM
Subject: I see Adobe Digital Editions on desktop but when I click on it it will not open. I have uninstalled and re-installed Adobe Digital Editions but it still will not work. I used it a few days ago and it worked but won't now.
I see Adobe Digital Editions on desktop but when I click on it it will not open. I have uninstalled and re-installed Adobe Digital Editions but it still will not work. I used it a few days ago and it worked but won't now.
created by shreya in Adobe Digital Editions - View the full discussionYou are facing this problem on Windows or Mac ? and which version? Please let us know. Thanks If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7351396#7351396 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7351396#7351396 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Digital Editions by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I need to create a second back-up of iPhoto from Time Machine to a separate external drive. The old iPhoto in TM will not open. Please help!

I need to create a second back-up of iPhoto from Time Machine to a separate external drive. The old iPhoto in TM will not open. Please help! And thank you!

Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

Installed up-dates and now Adobe Bridge will not open

Installed new up-dates for Photoshop CC and now Bridge will not open?

HI Michael,
You can now install older versions of Adobe products straight from Creative Cloud Desktop. (Version 1.6.0.393)
Choose 'Previous Version' in the Apps filter as shown above and then Chose Bridge 6.0 for Bridge.
-Pragya

I just bought and downloaded an embroidery file but Adobe Reader will not open it. What can I do?

I just bought and downloaded an embroidery file but Adobe Reader will not open it. What can I do?

Is it actually a PDF file or something else.
You haven't given us enough information to do anything other than throw random guesses your way.
Version of Reader? File type? Downloaded and saved to your desktop or are you clicking a link?
Opening in browser or using File>Open in Reader?
More info is better.

Pages is not responding, the icon comes up but the program will not open????

Pages is not responding, the icon comes up but the program will not open????

You have to give us some more information or do a search in the forum for answers on the same matter.

We have a mac laptop and dont have any problems with pdf files but our imac will not open them. any suggestions

we have a mac laptop and dont have any problems with pdf files but our imac will not open them. any suggestions?

Back up all data.
In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

I just purchased Acrobat XI for Mac, downloaded/installed on my MacBook Air, but the software will not open/initialize. What is the problem?

I just purchased Acrobat XI for Mac, downloaded/installed on my MacBook Air, but the software will not open/initialize. What is the problem?

What is your Acrobat XI version? If less than 11.0.09 I would suggest that you update, then try again. Download updates from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Macintosh
Note that you posted in the forum for Acrobat.com online services; you may get better help if you ask in the Acrobat forum.

I have installed max os x Lion on my MacBook pro, but now safari Will not open any internet pages

I have installed mountain Lion on my MacBook pro , but now safari Will not open any internet pages??

Try this:
1. Go to Safari > Preferences > Extensions
Disable any extensions.
Restart Safari and test. If that doesn't work, try this:
2. Create a new location and renew the DHCP lease. See here for the procedure:
http://osxdaily.com/2012/08/02/fix-os-x-mountain-lion-wireless-connection-proble ms/

I know it's old but CS4 Bridge will not open 5d Mark II files...oh man.

Similar Messages

Maybe you are looking for