Stictching effect on images in PDF produced from InDesign

Hey there
Requested I posted this in here over the Adobe PDF forum..
I have been supplied a PDF file created from Indesign (I do not know which version or what settings have been used, I suspect CS3 or 4, it has been made to PDF version 1.6 with jpeg2000 compression), I am preparing for online use through a third party supplier who is using ICE (a shareware product) which seems to be having problems rendering the images in the PDF file.
The images seem to have been broken up into small parts (ie rectangles and squares) - How do I stop the images from being stitched into parts and retain them in the PDF as one complete image, and is there a way to 'stitch' the images back together once this has happened and is present in the PDF?
I suspect when using the Jpeg2000 compression it allows you to control the 'tiles' setting, is this where the multiple parts of the same image have come from. I have tried to replicate the problem using images of various sizes (dimensions and mb's) but they all come out in the PDF file as 1 image and not multiple parts.
Thanks
Noel

It is always possible to determine which version of InDesign the PDF file was exported from by checking its attributes in Acrobat via Ctrl-D.
When an image gets chopped up in a PDF file, it is likely due to its interaction with transparency and therefore is involved with flattening. If you get a version of the PDF file created with live transparency as opposed to flattened transparency, such fragmenting of images is unlikely to occur.
- Dov

Similar Messages

Finding ligature text in PDF when produced from InDesign CS4

When searching the PDF, some words are not found. If I search the word "final", I find 19 occurences of the word "finally", but none whatsoever of "final". The word "final" is only found if I search for "fi nal" with a space between the "i" and "n". I previously suspected a ligature problem. Please provide me a solution and it will be greatly appreciated.
Regards,
Sathishkumar K

I'll repeat what we (Adobe) have advised users about since release 1.0 of InDesign.
The print function of InDesign is exactly what it claims to be. In the case of printing to PostScript printers, InDesign and the underlying Adobe graphics subsystems generate PostScript that is optimized for direct and efficient printing without any consideration whatsoever for any other purpose such as creation of PDF via distillation of PostScript.
The PDF export function generates PDF directly without any intermediate PostScript. This allows PDF to be created that retains live transparency, color management, layers, and accessibility if desired or specified. Such PDF is also generated in a manner such that it may be properly searched in Reader or Acrobat via inclusion of information that compensates for common ligatures and the actual encoding of the text and fonts in the PDF file; this is not possible with PDF generated by distillation of PostScript produced from InDesign because simply stated, such capabilities are not possible with PostScript! By the way, the inclusion of such information and support for PDF functionality one normally expects to find in Reader or Acrobat (including searchability, object metadata, etc.) is one of the major reasons why PDF files created by PDF export (and save as PDF in Illustrator) are larger than those brain-dead PDF files created by distillation of PostScript.
- Dov

Securing and protecting PDFs produced from Oracle Documaker

Hi Experts,
Is there anyway to secure and edit/ password protect PDFs produced from Oracle Documaker? This will enable us to protect editing, copying of content from the PDF.
Thanks

Yes.
See Chapter 4 pages 63 through 79.
http://download.oracle.com/docs/cd/E16256_01/pdf_book.pdf
This is 11.5 documentation; what version are you using?
-DA

PDFs exported from InDesign cannot be printed

Our Marketing Manager is using Adobe InDesign and exports her documents to PDF. These PDFs won't print in any of our printers in the office. It spools and then gets stuck and it actually makes our HP Coloured Laser Printer throw an error (error 79) and we'll have to restart the printer due to this error. We can print other documents and other PDFs in the printer so we know it's not a printer driver issue. In fact, we have isolated the problem to only PDFs exported from InDesign. Even if we create a blank document or add just text from InDesign and export it to PDF it still won't print. Really odd.
**I also posted this in the InDesign thread but was asked to post it here too. I tried printing the document using Adobe Acrobat and Adobe Reader with no luck. We tried printing directly from InDesign but it is inconsistent, sometimes it will print but most of the time it does not.

Hmm. Yeah. The ID forum may be more help. Especially if it's also a problem in ID.
My first suspect would be corrupt fonts or possibly an image file. Can you create a blank ID file with no text (maybe insert just an image or something that isn't on any of the other ID files) pdf it and print it?

How can I maintain multiple white spaces in a PDF written from InDesign?

I need to have 2 white spaces maintained (within a part #) in the PDF I write, but when I open in Acrobat it converts it to one space.
I've tried word spaces, set spaces and applying "no color" to a placeholder character and nothing is working!
Any ideas or suggestions?

I am talking about normal white space. Multiple fixed widt spaces are not a problem. How the space is handled in a PDF depends on how it is created.
Viele Grüße
Wilhelm Georg Adelberger
Von meinem iPhone gesendet
Am 21.08.2014 um 12:01 schrieb Peter Spier <[email protected]>:
How can I maintain multiple white spaces in a PDF written from InDesign?
created by Peter Spier in InDesign - View the full discussion
It may not be a great idea to use multiple spaces, but it certainly is not prohibited and sometimes is necessary -- you might want a 2em space, or a thin space before and after a tab you underline in a form.
I'm able to select the multiple spaces just fine in Acrobat 9 using the text touch-up tool.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6661037#6661037
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in InDesign by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

PDF Bookmarks - Change Default Width When Creating PDF File from InDesign

When creating a PDF file (from Indesign CS4) I automatically create the PDF bookmarks based on the InDesign document's Table of Contents.
But by default the width in the bookmarks is always set at "Fit Page".
Is there a way to change the default to "Fit Width" in Indesign before the PDF is created?
It's too much trouble to change every bookmark in the PDF after it's created.
Thanks for any help in advance!

Thanks, Steve. I have actually previously done what "fogharty" suggests and it does work if I want to set the pages to "fit width" or a variety of other options. However, none of the options is inherit zoom which is what I, and many other from the sound of the thread, need and want. We want to respect our end users--not dictate how they must view our PDFs. Hopefully, Adobe will listen and make this option available soon.

"Save as pdf" button from InDesign

Is it possible to make a "save as pdf" button from InDesign ?
Best regards, Mette Louise

Well, I'd say that, but if the button is to run Acrobat JavaScript it comes back to an Acrobat forum. But my question is: what would it do? The file is already a PDF.

PDF Files from InDesign much larger than Quark- Distiller, why?

We've recently switched our publishing workflow for one of our pubs from Quark to InDesign, and are having issues with PDFs being really large. Previously, the pub would be PS'd out of QXP6.52 and then ran through our Distiller service at Press Ready quality settings. The resulting PDF files were 4-6mb (This is only a 2-page pub).
Now, moving to InDesign, we PDF directly from InDesign (or I've also tried PSing and then Distilling), and using Press Ready Quality settings still -- the resultant PDF files are 15-16mb. Can anyone theorize as to what would create such a large difference between the two?
This is using a few issues of the pub - not just one instance, as well.
Thanks

[email protected] wrote:
7. Yes, the file and links are using transparency.
This is probably the answer.
Recreate the page in InDesign with no transparency (as a test). This means all links are tiff or eps. No use of opacity or blend modes. No drop shadows.
This is how it would have been in Quark 6, which did not support transparency (the newer kind anyway)
Note: if you had overlying drop shadows in Quark 6 they would have had to have been bitmap tiffs.
I also should mention: transparency is a good thing. There may be a way to get the file size down without removing transparency. Possibly you could use Acrobat to do this.
Also note I posted a couple of updates on my previous post, they may or may not be relevant.

Previews error in Bridge on PDFs exported from InDesign

When I export a PDF from InDesign CS5 and look at the file preview in Bridge it always reveals the two first pages of the PDF only.
It doesn't matter how many pages the PDF really has, it always just shows 2 in the preview in Bridge. While this may sound as a problem connected to Bridge, I think it is connected to the export process in InDesign. PDFs with several pages generated with other applications are displayed with their correct page numbers in the preview in Bridge.
I've had this problem since I first installed CS5 on my Macs.
If anyone can help, I'd be very grateful!
Regards,
Eivind

It happens to ALL my PDFs created from InDesign, and on both my Macs. I've also seen other Macs that have the same problem.
If, however, I do change the number of preview pages displayed on the INDD file, this actually carries across to the PDFs that I export too.
Another weird consequence is that if I open one of those PDFs in PS and save a page as a JPG, that JPG's preview in Bridge is also shown as if it consisted of 2 pages.
I have upgraded my OS several times (it's now the newest OS X version available), and it hasn't helped. I have also cleared out everything Adobe on my Mac, preferences and all, and re-installed it – it didn't help.
Adobe support acknowleged that it was a bug, but couldn't reproduce it so they couldn't help. Updates to CS5 has not fixed it.
I was sort of hoping someone else here had encountered the same problem and figured out a fix, or that they could tell me if it was fixed in CS5.5.
I thought maybe it was connected to the language settings in my OS since I've seen it on several Macs set to Norwegian, but the guy on Adobe support had a set up with Norwegian language, and apparently he didn't have same problem.

Examples of interactive PDFs generated from InDesign

Where can I find examples of interactive PDFs generated from InDesign? I offered it as a solution to a customer and they would like to see examples. All I am finding are tutorials. Thanks!

AdobeAcrobatShowcase

Enable commenting on PDF produced from RSTXPDFT4

Hi experts,
In our business , we are using program RSTXPDFT4 to convert an ABAP spool list into PDF. Now, there is a request for the ability to put comments onto the PDF file (see attached "Insert comments.jpg"). We found that we are unable to do so with our current version of Adobe Reader 9.
However, a user with Adobe Acrobat Pro will be able to save the PDF with "Reader Extended PDF -> Enable Commenting and Measuring" (see attached "Adobe Acrobat Pro.jpg"). When this is done, we can then open the PDF file using Acrobat Reader 9 and add in comments.
Here is the question - is there a way to convert a spool into PDF with the "Reader Extended PDF" properties from SAP, so that it is immediately ready for commenting?
Regards,
Sui

I don't think so.
Adobe Acrobat may have to save the pdf in higher version whose specification has the said feature.
Most pdf writers create pdf with version 1.4, which is lower than latest format, but good enough.

The difference of pdf export from Indesign CS3 and other Indesign version

Hi,
When I am exporting pdf of an Illustrator eps file from Indesign CS2 or CS4 etc.. i am getting the proper output as its there in illustrator, but when I am loading the same Image in CS3 and exporting pdf its not producing the proper output. Here I have my screen shots.
Cs3
other versions
awaiting your reply
Thanks in advance
Biju Mathew.

You have to educate your customer: EPS is an outdated and lossy file type because it does neither support transparency nor color management and should be avoided to be used with InDesign or Photoshop or Illustrator.
I don't understand, why so many insist in using EPS?

Printing pdf exported from InDesign

When I print a pdf that I've exported from InDesign some of the graphic boxes or even text boxes that have effects, show up. They appear as a box with a subtle color a bit lighter than the background color of my design. These boxes do not show up on screen even when [view overprint] is on. The graphics are usually created or edited in photoshop with a transparent background so that only the image I want will be transfered to InDesign. Please HELP!

Thanks Daniel but this did not work for me perhaps because the following step was greyed out for me so I wasn't able to complete all the steps. I did try Claudia's advice to print image, that worked but it's getting a bit pixilated.
File > Print, and under Output, choose Composite CMYK, and CHECK the ?Simulate Overprint? checkbox. Under Advanced, select your all-raster flattener.
Maybe it's the way I created my original document, not sure.
Thanks anyway!
Patty

How can I restore proper PDF exports from InDesign CS3 or CS5 in Snow Leopard?

I had no problems exporting PDFs from InDesign CS3 (on a Mac Pro running 10.6.4 Snow Leopard) until this past weekend, when all the fonts appeared bitmapped or thin and raggedy, and the images lost some color depth and contrast. When I copied the InDesign document to my MacBook Pro laptop, also running 10.6.4, the PDF emerged with its original quality. Calls to Adobe support referred me to documents concerning incompatibilities between InDesign and Snow Leopard. One of these documents was several pages long, but I could not print it from the Adobe website to my HP All-In-One Officejet, because one-third of the document was hidden under a white panel. This makes the document impractical for troubleshooting, because I don't have enough screen real estate (even on a 23-inch display) to keep the document open along with all the pages and dialogue boxes needed for reference. Back to phone and chat support, I was advised to upgrade my Creative Suite Premium CS3 to CS5 ($800!!!) and purchase the latest Acrobat Pro upgrade ($200), with no guarantee that this $1,000 cost would actually solve the problem. I did download the trial version of InDesign CS5, and it did NOT solve the problem. I'm also concerned that the problem did not exist until last weekend. Prior to that, my CS3 and Snow Leopard combination worked just fine. I then checked the forums and was dismayed at the variety of problems associated with PDF files, for which there seems to be no general fix. Meanwhile, I have hundreds of ads I'm supposed to be preparing and emailing as PDF proofs to businesses around the country. I have two books of 120 and 256 pages that need to be submitted to printers in PDF format with all kinds of fonts and image files belonging to my clients. The last time I submitted a book to a printer via email, the job went perfectly. This time, and next, it's obvious I won't be able to send PDFs at all! If that's the case, my 27-year-old directory business will be unable to absorb the expenses necessary to start all over with new computers and software, and I will be out of business. Period. So-- does anyone have a way to fix this? I would surely be grateful.
David Henderson

I'm on a local network, built on Apple's Airport Extreme. but I'm the only computer user on it. I use it for transferring files between the desktop computer (Apple Mac Pro) and laptop (Apple MacBook Pro) and, occasionally, to print from the laptop to a Xerox Phaser printer.
About a year ago, I added an Apple Airport Express to the network, allowing me to play iTunes music from the laptop through a Panasonic BluRay player connected to a home theatre sound system. No problems of this nature appeared with that installation.
About four months ago, we connected a DirecTV satellite receiver system to the D-Link router that carries wired network service from the desktop computer to the Xerox printer. The satellite TV system includes a series of modems that allows DVR recordings to be accessed and played from any of the TVs in the house. (As you would now perceive, I run my publishing business from my home). However, this set-up has been functioning for about four months, and I did not encounter the PDF problem until last weekend.
Now -- about the fonts.
Because of the many ads that I publish from various sponsors, it is possible that different versions of the same fonts have invaded my system. In the "missing font" alerts I get, InDesign frequently is seeking TT or T1 versions, which I replace with Adobe fonts when possible. Adobe Creative Suite Design Premium included a fairly large collection, which it keeps in one folder. The Apple OS also includes a bunch in a separate font management folder; and there are carry-over fonts that came with the business when I acquired it 10 years ago. Some of those fonts may go back 25 years to the book's inception. However, in the past several years, I have generally rebuilt all the ads that appear in my publications, substituting newer versions of fonts. Hence, the preflight program has been able to locate and include all the necessary fonts in the packages that go to the printers.
Once again, I have been able to export good PDF files for all the varieties of ads and books included in my system, until last weekend. One of the documents is built entirely with Helvetica Narrow, for which I have only one version.. Another document consists mainly of Times, and there are 3 or 4 versions of that font in the system; but the version contained in the document has not changed from when it exported properly.
So... I guess the complexities involved in the network and/or fonts could be part of the problem, as you suggest, but golly -- I hope not. The last thing I want to do is disrupt and rebuild the network or font collections. The font situation especially would set back production for months if not years, because so many individual ads and off-site clients would be involved in the process.
I'm sorry if I provided more details than you expected. I didn't mean to take so much of your time.
Thank you.

Problem with creating/viewing PDF's from InDesign CS3

I have a problem with our PDF workflow and just cannot seem to resolve it.
The problem is as follows: My coworker and I (both designers running CS3 on iMac's running 10.5.6 Leopard) work daily on producing documents and graphic layouts.
Internally we can view and print PDF documents we create just fine with no troubles with the exception of our supervisor, who is running a mac with Tiger operating system. Our office environment is both Mac and PC. On may occasions he cannot print PDF's we create. Many times his prints will contain garbled characters, drop italics and formatting, replace fonts, or just print slowly.
This problem is also happening to our editor who is offsite. This is a fairly serious problem for her, considering her job relies heavily on being able to view and open PDF files we create. She was able to send a PDF file which shows the garbled mess her printer spit out when she printed. Apparently there were pages upon pages of messy garbled text. When documents do print from her, they are usually very slow in printing, taking up to a minute or more to print each page.
The sample of what she sent me is attached, and can also be found on my MobileMe iDisk at: http://public.me.com/rlcollier (document entitled Print Results.PDF)
My question really to the community is obviously what might be causing these problems. Its very frustrating not being able to determine if its something we're doing ourselves thats causing some incompatability or corruption in these files, or if its the users systems themselves. I can say that Debra our editor has can have a garbled mess of a 4 page file from us, and then turn around and print a graphic heavy 90 page PDF with ease from Boeing. Our PDF's seem to be the only ones she struggles with. That being said, my inclination is that its something on our end.
Any ideas of where to start looking? Any help at all would be greatly appreciated and welcomed. Thanks!

I currently had our editor test printing of some of our files using both Foxit and Adobe Reader (as was suggested) in order to see if either made a difference in her printing ability and here is what she came back with:
I tried to print out both these pdfs (David's is the one you reworked and Lisa's HESSM-3, both sent yesterday).
With Adobe: David's first page printed quickly, but it had errors (part of his pants didn't print, and there's an arbitrary shaded box in the text). Page 2 didn't print--every time I tried it had a different "offending command" code. Printing Lisa's HESSM made it up to page 7 before problems showed up (stock photo only partially printed), and it stopped on page 8 (with the random "offending command" code).
With Foxit: Both David's and the HESSM pdfs printed completely and without error...but it took a long time. David's 2 pages took about 3 to 4 minutes, and HESSM's 16 pages took close to 20 minutes. The time is in the transfer of data to the printer; the physical printing goes pretty quickly.
I cant say that I believe email is the problem, although I cant rule it out. I've tested emailing vs. passing through our workgroup with my supervisor, and it does not make any difference in his ability (or lack of ability) to print our files. He was able to print to a different printer (an HP 4650 as opposed to a 4100) without troubles. He refuses to believe its a printer problem however because PDF files originating from our office are the only ones he has trouble with. Never has he had any trouble with a single PDF file produced from any other source. This is also the case for our editor who only has trouble with PDF files originating from either mine, or my coworkers systems.
PS: I've attached both files that were referenced by our editor above for viewing/testing.

Stictching effect on images in PDF produced from InDesign

Similar Messages

Maybe you are looking for