I'm having problems rendering out h.264 720p files

this is what i get and my settings
my export settings were untouched and default

I was exporting h.264 files fine, but suddenly it gave me the error thing. Don't think I changed anything for that to happen.
If I export animation QuickTime won't that make huge file size's?
Will check that Wikipedia page.
Thanks!

Similar Messages

Having problems rendering

Hello everyone:
OK now I'm having problems rendering. I have about 6m:22sec of video that I need to render. But I get this Render Error:
Insufficient disk space. Free up space with the Render Manager and Retry?
There is no files in the Render Manager Section?
What do I do. The project is on a 1 TB Western Digital Ext Hard Drive with plenty of HD space.
Any help would be great.
This is not my day
Damon

The project is on a 1 TB Western Digital Ext Hard Drive with plenty of HD space.
Fine. But where are the Render files being written to and how much space is on that drive?
Look at your Scratch Disks setting to find out.

I have an Ipad 2 and are having problems sending out emails in one of my email address. I always get a message reading the email was not sent because the server does not allow relaying. This is an email account POP3. I have no such problem with gmail.

I have an Ipad 2 and are having problems sending out emails in one of my email address. This is a POP3 email Account? I always get a message reading that the email was not sent because the server does not allow relaying. I have no such problem with gmail. What could be the problem and how do I resolve this. Is it about settings?
Richard.

Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

Anyone else having problems making a hyperlink to a file in CS4?

Anyone else having problems making a hyperlink to a file?
I have a document in CS4 that I'm exporting to pdf. When I create a hyperlink in CS4 to a file, I am getting the message when I click the link in the pdf ' Cannot find the file:C%5Document' etc.
When creating the link, File is selected, Shared Destination is unchecked & checking the link using 'Go to Destination' shows the link works.
In Acrobat 9 Pro, I've checked the properties of the link - when exported from CS4, the Link Properties - Actions are 'Open a web link' 'file:C:\Documents%20'etc whereas if the link is created in Acrobat the link properties are ' 'Open a file' 'file:C\Documents and Settings' etc, and it works.
Is this a bug or am I missing something?

I'm only getting that to work with the catalogue & sample in the same folder. In any case from a useability standpoint using URL brings up the Security Warning & putting the catalogue pdf in the same folder as 100 sample pdfs makes it more difficult to locate.
I'm at a loss to understand why the functionality of creating a link in InDesign cannot be the same as Acrobat; where you can select 'Open a file', browse to that file and the relative links are maintained when you burn to a disc. InDesign looks as if it will do the same but when you select File as the link & browse to the destination file but InDesign treats it as a URL & brings up the the web link cursor in the finished pdf. That still looks like a bug to me.

I rendered an h.264 m2ts file at 17M bitrate, why Encore says bitrate is too high?

I rendered a h.264 m2ts file at 17M bitrate, why Encore says bitrate is too high?
17M is so low, so I have to render an AVI file and import it to Encore and let Encore transcode it, bitrate can be set to 40M, why? Encore's transcoding is toooo slow!
I rendered the m2ts files use Edius.
Help!
Thanks everyone!

Thank you Stan Jones!
I had set Maximum Audio/Video Bitrate to 40Mbbps in Project Settings' Default Transcode Setting dialog, and my Authoring Mode is Blu-ray. Things did not change.
But my m2ts file should be set to "Don't Transcode", so the values of transcode settings should not affect my m2ts file.
I've just find one thing: it seems that m2ts files rendered by Edius 5 will not work well in encore, while Edius 6's work better. I test some Edius 6's m2ts files over 30Mbps, it work. Is there something wrong with Edius or Encore?

Having problems extracting/convert Adobe Reader Pdf files to Adobe Digital Reader files.

I am currently having problems trying to convert my Adobe Acrobat PDF file to and Adobe Digital Reader File.
o

What kind of problems?

Great Resource for anyone having problems rendering their projects

We see questions almost every day about rendering problems. Why does my file???
The best solution for most rendering problems is to use the Adobe Media Encoder. Joost van der Hoeven has created a new series on the AME for Adobe TV. I just watched them all. They are clear, concise and a great resource for anyone wanting to understand the rendering process and deliver high quality product to their viewers.
Learn Adobe Media Encoder CC | Adobe TV

This does not solve the problems in the rendering.

Is anyone else having problems running out of RAM following an upgrade to Mavericks and Server v3?

I recently upgraded to Mavericks on my iMac which was also running Server v2. Following the upgrade to Mavericks I upgraded to Server v3 and have been suffering from constant errors where the computer complains that I have run out of RAM and suspends all applications until I restart the computer. I cannot work out how to turn off or delete the Server and therefore cannot isolate the problem to OS X or Server.
Is anybody else experiencing the problem? I am quite happy to delete the server running on the iMac as I only installed for experimental purposes and only really use it as a caching server at the moment.
Any help gratefully received.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

I'm having problems finding out some details regarding mySAP product.

What is the current version, how long has it been out, when was the last
version released
3. How many companies are using the product (using, not bought)
4. Is the product available world-wide
5. How is it sold e.g., direct, channel partners, etc
6. How is it delivered e.g., direct, partners, etc
a - if partners, how many are there? are they available world-wide,
is their a certification process in place? if yes, how do they distinguish
those partners
7. What languages is it available in?
8. How can it be deployed, e.g., in-house or hosted. If hosted, are
hosting partners restricted?
9. What is a typical implementation cycle
10. Technology
a - what is the technology platform
b - is it available on MS networks and does it use MS SQL server as
the database
c - is it fully integrated into MS Outlook and MS Office
d - what reporting technology is used
e - what interface protocals are supported
f - are separate interface tools required
g - are there any supporting technologies
h - what is the recommended server architecture
i - is it available via web, disconnected user and pda
j - how is it configured
i. is configuration limited
ii. is customisation allowed
iii. how is it customised
11. Licensing
a - how is the product licensed e.g., base plus modules, laundry
list, etc
b - are the licences perpetual use or rental
c - what is the typical percentage of maintenance charged

Hello Dyfed,
first of all, it would be nice to know what "MySAP" product you are talking about. Then I would be able to answer some of your questions.
But the information is also available all over SDN and you can find it there too.
In case this is a formal product questionaire, I would recommend to contact your local SAP representative and get these questions answered there.
Kind regards,
Benny

I have an iPad 4 generation and just purchased my first apple cell phone. I am having problems figuring out how to sync the 2. I called Verizon and because my iPad isn't using the 4G it can (I just haven't needed to use it) the tech person can't do it.

I have an iPad 4 generation 4G and just purchased my first iPhone an Apple 5s. I need help synching the two. I have never needed to use the 4G Verizon option so Versizon tech said they can't do it and Apple needs to. But I no longer have Applecare and it doesn't yet recogniz my Applecare with my new phone (new yesterday). Anyone know the steps so I can sync the two and sync the Clouds then? Thanks

You cannot sync the two devices together. You can keep the two devices in sync by using iCloud and some of the available settings on both devices. Go to Settings>iCloud and you can turn on Reminders , Calendars, Notes, Safari Bookmarks, Contacts, Photo Stream, Mail, Keychain, etc.
You can go to Settings>iTunes and App Store>Automatic Downloads and turn on apps, songs, books and updates to keep all of those items in sync as well.
But why don't you explain exactly what you mean by syncing the two devices? What do you hope to accomplish?

Having problems with LR4 and NAS stored files.

I recently established a NAS Raid 5 to store my photo library. I have found out that LR4 does not sinc up to the stored files. Are there any solutions.

What have you tried? What happened when you tried?

Having problems: can't open an html file with textedit to change code

Hi. I have been trying to open up both my index.html and my Welcome.html files with textedit in order to change the HTML codes for them - but it doesn't seem to work. When I open them using text edit I still get a discomboblutaed form of the web page and no html codes. HOWEVER when I open them with Word I can get at the HTML code. Will changing the code in Word work or must I use textedit to do it? ULtimately does anyone know how to fix the fact that your web URL always gets redirected to the home page because of the index file. For Instance, my web site is www.zanzibarhotelbeach.com but when you type that in it redirects to the opening page www.zanzibarhotelbeach.com/Home.html which is a problem for when you want to submit your web site to be found on the net. Any help would be MUCH appreciated! Cheers!

Give TextWrangler a try. It's a free editor by the makers of BBEdit and is very well suited for editing HTML.
But as far as your URL in the window, unless you have URL forwarding with masking you will always get the page name at the end of the URL in the browser's window. That's just how it works. With masking you will only get www.zanzibarhotelbeach.com in every window of the site. BUT visitors will only be able to bookmark the first page of your site. My tutorial site, http://toadstutorials.info/ is set up that way.
This thread discusses how the different domain name forwarding works:
http://discussions.apple.com/thread.jspa?threadID=1164519&tstart=0
OT

I am having problems getting my hyperlinks to PDF files to work

It seems that since this recent update, the links to my PDF files don't work. You can only highlight the files but the PDF does not download. Can anyone help me fix this or should I reload iWeb and not update it until they fix it? The website is arlingtonwomensclub.com if anyone wants to try the links.

I do see your problem, and I have a possible solution for you...
Here is the (working) link to your PDF file...
http://arlingtonwomensclub.com/Town-Wide%20Garage%20Sale_files/Arlington%20Women %25d5s%20Club%20Garage%20Sale.pdf
And here is the (non-working) hyperlink that is on your page...
http://arlingtonwomensclub.com/Town-Wide%20Garage%20Sale_files/Arlington%20Women %E2%80%99s%20Club%20Garage%20Sale.pdf
And this is the name of your PDF file...
"Arlington Women's Club Garage Sale.pdf"
The problem here is that the name of your PDF file includes an apostrophe and it is being coded by iWeb and interpreted by your server in different ways, which is leading to the "File not found" error message when you click on the link.
I would encourage you to simplify your filenames and pagenames and sitenames, because long names with spaces and other special non-alphanumeric characters will get converted into their character codes and may not be interpreted correctly by browsers or other servers.
Change the name of your PDF file, maybe to a simple "application.pdf". Relink it to your text link. Republish and I think you will see an improvement.
Let me know if you have any questions or run into any other roadblocks.

I am having problems opening a copy protected cd file

I am trying to open a CD which contains mainly PDF files and is copy protected but somehow it doesn't open and doesn't even appear anywhere on my computer. I have managed to access it through the Disk Utility and foun the CD on hidden folder volumes, but when I try to open the disk the folder inside it appears for a few seconds and disappears, as if the disk was blank. I suppose that it has to do with the copy protection, since the content appears to be in the disk.....If someone could please enlighten me on this subject I would appreciate very much, because I really need the files on this CD with kind of a hurry! Thank you!

On the Mac open System Preferences > iCloud. Deselect the box next to: Documents & Data then reselect it.
On the iPad tap Settings > iCloud
Switch Documents & Data off then back on.
Give iCloud a minute to re sync the data then try opening that document on either your Mac or iPad,

I've started having problems with downloading and opening PDF files. Any hints?

This started late yesterday and I've been unable to download or open or view any PDF files. I've restarted my computer a few times, made sure Preview was open then when those things didn't work downloaded Adobe PDF reader and that didn't work either. Any other ideas????

Back up all data.
Quit Safari. In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then launch Safari and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

I'm having problems rendering out h.264 720p files

Similar Messages

Maybe you are looking for