I'm having timeline playback issues on one user on an iMac but not on another

Ok, I'm stumped. The iMacs we have here at the high school are set up through active directory and on the Admin account, premiere performs fantastic. On the student accounts however, it has this weird playback issue where it will play for about a second and then stop. You can keep pushing play but it keeps stopping. The app doesn't crash but playback is really bad.
I sure appreciate the help.
Thanks

[email protected] writes:
>http://forums.adobe.com/message/4785083#4785083
Thanks for the reply!
Are there any user settings in particular that I could enable?
The bummer is that the imac is running for a student account and admin is
pretty strict about enabling administrator prefs to students.
Thanks,
Nathan Ward
TV Productions
[email protected]

Similar Messages

Seems like alot of people are having the same issues with being able to receive email but not send emails. Like others, I have tried re-booting, switching off, deleting account, reinstalling account but to still no avail! Does anyone else have any ideas?

Hi there - I have rebooted and turned off ipad and deleted my yahoo account and reloaded it but I still cant send messages, any other suggestions? Thanks.

Me too,
I can logon to Yahoo directly with my wife's iPad. I can then send an email to my iMac. What I cannot do is send an email directly from her iPad to me - so I consider the problem is with iOS 7.0.3. All i get is a long 'sending' session that ends with "incorrect username or Password", but that cannot be right. I have deleted and re-created the account on the iPad - cleared Safari's history and cookies. Nothing changes. It seems to be very widespread this problem and as yet nothing coming from Yahoo or Apple. This is similar to the Windows' users experiences. Pity.

We have 2 users on our computer both using Yahoo as our home page. One user page loads fine but the other loads with awhite background and text overlayed on other text. Can you help?

Not much else to add.

I'd still prefer to keep separate user accounts. I never had any issues like this before. The only time I started having a problem was when I was just trying to force empty the trash a few months ago. I came on here looking for a solution and someone posted a way to empty the trash using the terminal. Before then, I hadn't used the terminal for anything--it was just another app in my utilities folder. (None of this has anything to do with having separate user accounts. Plenty of people with kids make second and third user accounts on their laptops so that multiple people can use one laptop, having more than one user on a laptop is not very difficult.) But thank you, I'll try that out and see if it works!

Why is my iPhoto library greyed out in the Screensaver folder selection dialog on one iMac but not my other?

Why is my iPhoto library greyed out in the Screensaver folder selection dialog on one iMac but not my other?

I have an update to my issue above, with a Semi-solution found. I brought my Macbook Air back to the Genus bar today and they were able to identify (using “Activity Monitor”) that when the particular iPhoto library was being launched through iPhoto both Photostream and iPhoto's CPU% usage was excessively high (between 100% - 200% each). She discovered that if we turn off Photostream in iCloud settings iPhoto then behaved fast and snappy and CPU% came back down to a healthier level. When we turned Photostream back on the problem continued. After an hour of trying to trouble shoot why Photostream was causing the issue they recommended I keep Photostream turned off until a future software update/fix comes out. The particular Genus I worked with was not familiar with this issue. I’m very happy to at least be able to use iPhoto again, but if anyone has ideas or theories on how the Photostream conflict can be fixed please share. Thanks.

How can i Delete all foto from my iphone and after some time get them one more time on it but not as a new album :)?

How can i Delete all foto from my iphone and after some time get them one more time on it but not as a new album, i want them in the camera roll ?

How can I delete EVERY THING off my Mac and have it like new?
Boot from the software install DVD and do an "erase and install" when prompted.

Airplay works for one user but not for another on the same machine

I have the problem where airplay works for one user but not for another and both users are on the same machine. For the user where it does not work, everything appears normal, it's just that there is no sound being transmitted. I have tried restarting the Airport express, restarting iTunes, repairing disk permissions. Any ideas about what can be done to resolve this?

my /etc/group:
root::0:root
bin::1:root,bin,daemon
daemon::2:root,bin,daemon
sys::3:root,bin
adm::4:root,daemon
tty::5:
disk::6:root
lp::7:daemon
mem::8:
kmem::9:
wheel::10:root,hans,ibm,gast
ftp::11:
mail::12:
uucp:x:14:
log::19:root
locate:x:21:
smmsp::25:
http::33:
games::50:
network:x:90:
video:x:91:
audio::92:ibm,gast
optical::93:hal
floppy:x:94:hal
storage:x:95:hal
scanner:x:96:
power:x:98:
nobody::99:
users::100:gast
dbus:x:81:
hans:x:1001:
vboxusers:x:108:hans
policykit:x:1002:
hal:x:82:
kvm:x:78:
nx:x:85:nx
avahi:x:84:
camera:x:97:
gdm:x:1003:
gast:x:1004:

HT3309 One User on my iMac seems to be disabled. When I log onto that User the desktop appears empty and only half of the programs appear on the operating bar. I cannot open any program and nothing works. I have to use Command/Option/Esc to restart the

I cannot access one user on my iMac. When I log onto that user the dekstop appears unpopulated and blank and half of the programs do not appear on the operating bar. When I attempt to click on a program such as Safari nothing happens. Nothing works and I can only exit by doing a command/option/esc and restarting the computer. The other user and the Administrator work fine. What has disabled the one user? How do I recover this user and its files?

No.. I have been through parental control and it does not affect this problem. Now if I log onto this user I cannot get out even with a comman/option/escape; I have to unplug the power to the computer to get it to restart with the administrator. I saw somewhere that there is a process in which I can delete the use and then create a new user with the same name and password and then recover everything - but I cannot find that solution. This is a real problem for me, as you might imagine.

Timeline playback issues

I am having issues with the playback of clips in my timeline. The clips will play for 1 or two seconds then stop. If I click play the same thing repeats over and over. The odd thing is that I can intermittently on occasion play the timeline without doing anything differently.
Before we go too deep pointing blame at hardware issues I am able to play these clips with NO problems using Aunsoft Final Mate, Windows Media Player as well as AE writer 5.0 which came with my camcorder. I have the Panasonic HCX920. This camera records 1080/60p. with 5.1 channel audio. When I select project assets I get the following info. Type: MPEG Movie Size 1920X1080, frame Rate 59.94, Pixel ratio 1, average data rate 3Mb/sec, source audio 48Khz compressed 6 ch.,project audio 48Khz 32 bit floating point 6 ch.
I record to SandiskExtreme Pro SDHC UHS-I cards 16 GB. I am adding the media using the 1080/60p preset in Elements 11. I save my projects on my C drive but keep everything else including the imported video, scratch discs etc on my WD RE 4TB SATAIII hard drive.
I am running Windows 7 Pro 64Bit I have 16 GB of RAM and the processor is the Intel i5-2500k CPU at 3.3GHz.
I have updated my Nvidia video card driver to the latest its the GT430. I have also made sure that I am running the latest version of Quicktime.
I purchased the Adobe Premiere elements 11 Classroom in a book and have read it. I have checked the problem solving docs on adobe's web site. My concern is that I can play back these clips without any issues on everything that I have tried except PE11.
Correct me if I am wrong but I am supposed to play the entire timeline from beginning to end by pressing play without interruptions correct?
I have tried rendering the timeline but that doesn't seem to do anything. There is no indication that lets you know if rendering is in progress or if completed. I know that PE11 supports 1080/60p but is this cameras output something that PE11 doesn't handle?
Any suggestions would be appreciated.

98taxi
Please excuse the question, I was reading about your Panasonic HCX920 offerings and noted AVCHD 1080p60 and AVCHD 3D.
What is the difference in the properties between the two so that one can distinquish between the two on a MediaInfo or other properties readout?
You wrote
I have tried rendering the timeline but that doesn't seem to do anything. There is no indication that lets you know if rendering is in progress or if completed.
When you tried to render the Timeline containing the 1080p60, was there an orange line, green line, or no colored line over its content on the Timeline? If you have no colored line or a green line, there is no rendering when you press the Render Button or press Enter or go Timeline/Render Work Area, just playback of your Timeline. The colored line indicator system is the program telling you whether or not it feels that you are getting the best possible preview for what you are seeing in the Edit Mode monitor at playback. With no colored line or green indicator, no rendering since the program feels that you are getting the best possible preview. You realize that once you edit that "rendered" clip it will require rendering to get the best possible preview of what you then have. If orange line over time and you render, you know the rendering process is complete when the orange line is completely replaced by a green one.
When all is said and done, at this point, if you export your 1080p60, what does the export look like on your player? Are you seeing the same problems in the export as you are seeing at the Timeline level?
If you are exporting the 1080p60, then to what...1080p60 with 5.1 channel audio? If you want to do that, as 1080p60 with AAC 5.1 Channel Audio I can tell you how to do that. Can do as AAC but not Dolby Digital.
If you did want to follow up on JMJarrige's suggestion about deleting the BadDrivers.txt file, in your Windows 7 64 bit, the BadDrivers.txt file can be found in the path:
Local Disk C
Program Data
Adobe
Premiere Elements
11.0
and in the 11.0 Folder is the BadDrivers.txt file that you delete.
I may have missed the information in what has already been written, so I would appreciate it if you could remind me how you are importing your 1080p60 into Premiere Elements
a. from memory card into Premiere Elements via one of the Add Media choices as mentioned by SG, that is, the FLIP one
or
b. transferring your 1080p60 to the computer hard drive save location, followed by import into Premiere Elements 11 via its Add Media/Files and Folders?
Just some thoughts.
ATR

Anyone else having weird playback issues? 10.1.0

I've noticed that Logic makes a weird "hiccup", about 1-2 second after starting playback of a (one long) audio-file...
(It sounds as if the audio file is cut, and repeats a 16th...)
On the track I have a pitch-shifter inserted. (Vocal + 18cent).
Is this something new in 10.1.0 ?
- until solved, I've have to work in my old v.8 ....
please let me know A.S.A.P.

Bumping this thread up to see if anyone else is having similar issues. I am experiencing massive drop-offs since upgrading to 1.13, almost entirely dealing with cell tower handoffs.
It is dropping calls in places I have never seen it drop calls before, usually when I switch from one tower to another. It's almost unusable at this point if I'm driving anywhere.

DNS Issues - Can ping server name and IPs but not FQDNs.

Hi All,
Hopefully some one can help me here, I am having an issue where one of my domain attached servers cannot ping any FQDNs in the environment but it can ping the host names and the IPs and look up the host names from a reverse look up.
We have done the following troubleshooting:
Flushed and registered DNS cache.
Restarted the DNS client and net logon services on the effected server
Preformed standard checks and commands such as:
Checked the event logs and found there were warnings for DNS registration.
Compared the DNS settings in the network adapters across the rest of the servers in the environment and found that they were all the same. DNS Suffixes are added in the correct order and are set to register.
Pinging FQDNs which is not giving any results.
Tracert FQDNs which is also not giving any results.
Nslookup which is querying the DNS server directly and giving results as expected
Ran the command which reported successful: dcdiag /test:registerindns /dnsdomain:sub.domain.net /v
Checked and updated the permissions on DNS for the affected server to give the server full control of its own DNS entry.
Replaced the DNS Client service DLL with one from a server that is working as expected.
Also worth noting is that the affected server (as well as every other server in the environment) has 2 NICs, one that communicates with DNS and AD and the other does not have any DNS IPs set.
Not this is not the first time this happened, a reboot fixed the issue before but it seems to be a reoccurring problem now.
If any one can shed some light on this issue I would be grateful.
Regards,
Steve.

Hi Steve,
First, we should confirm if this issue is caused by DNS.
When you ping the FQDN, does the server show the correct corresponding IP address?
If no, there should be some error messages. If it is possible, please post the screenshot of this issue.
To check the process about how does server resolve the FQDN, please follow the steps below:
clear local DNS cache with command ipconfig /flushdns
perform the network capture
ping the specified FQDN
Check the DNS traffic
To download Network Monitor, please click the link below:
http://www.microsoft.com/en-hk/download/details.aspx?id=4865
Besides, have you tried to update the NIC driver to the latest version?
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

DVD plays on one TV DVD player, but not on another

I made a video for a client's 50th b-day party, and burned it with DVDSP 3.
I am using Verbatim, DatalifePlus 16x media.
It plays fine on my G5 and my TV's DVD player, as well as on my clients computer, but not on his TV's DVD player.
I am not sure what kind of equipment the DJ at his party will use, but of course I want to be confident it will work.
Anyone have issues like this, or any solutions/explanations?
Thanks.

If I was going to wager, it sounds like the player is old.
The other items can also cause issues, sometimes high rates can cause problems, but it does not sound like that is the case with the rates you used, especially if you (?) used AC3 for the audio. Usually that would happen more if playback is poor (as oppossed to not playing at all.) Also note that some players handle dirt/scratches better than others, so some may play the disc and another may not. Of course the last thing is that it is DVD SP causing the issue. Some players have issues with how DVD SP authors a disc.
I would try burning slower (as suggessted) and try a different brand of media. If you are able to find out which machine they have you may be able to find out what it is designed to play (media -R/+R etc.) of if there are known issues with the machine. Usually older machines would work with -R if there was going to be one over the other.
Take a look here
http://www.digitalfaq.com/media/dvdmedia.htm
Verbatim seems to be rated well. Personally I like Taiyo Yuden -R for SL and Verbatim +R for DL

8630 all-in-one prints wirelessly from phone but not from laptop

I just set up my new 8630 printer and it is connected wirelessly. I printed something from my phone on it. I downloaded the driver from HP to my laptop but it will not work with the printer. I cannot print wirelessly from the laptop. I have not tried from USB cable because I am determined to make this work! I am not sure the driver installed properly either. When I go to the control panel and click on printers and find the 8630 it says"empty." Feeling frustrated. I never have good luck installing stuff like this! I also downloaded the troubleshooting software and none of the solutions has worked either. Any help would be appreciated!
Thanks!

Hello DLKoons,
Welcome to the HP Forums.
I see that you are having some communication issues as well.
Like I stated to the other person on this thread, I am going to need the operating system that you are using.
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
I look forward to hearing from you.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

ATT Microcell works with one iPhone in the house but not the other

A client of mine got new two new iPhone 6 phones when he and his wife signed up for ATT service. What ATT failed to tell him is that they don't have a tower in the area where he lives and he gets no cell reception from his house, and has one bar while standing in his driveway. Extremely frustrated, they went back and complained. ATT's answer (of course) was to then sell them a Microcell device. Oddly the Microcell they received is a small black box with only a single ethernet port in back. It is not like the white 'Y' designs you see online. The whole thing seems like a money making scam to me but that's beside the point. Anyway, I went over and hooked up the Microcell to their Xfinity router from Comcast, then logged into their ATT account and initiated the activation process. It took about 30 minutes to complete all four stages which included downloading a software update. Once the Microcell was activated, one of the Iphones had full bars. However, the other iphone still only had a single bar. Why would one iPhone have full bars and the other still have only a single bar? 1. Tried turning off both phones and turning them back on. Problem persisted.2. Tried moving the phone with a single bar coverage right next to the Microcell. Problem persisted. 3. Tried turning off just the iphone that had full bars. Problem persisted.4. Tried resetting the Microcell device. Problem persisted.5. Tried disconnecting both phones from the wireless internet network for the house. Problem persisted. Really confused on this could be happening with just one of the two iphones in the house.

AT&T has not completely updated the MicroCell page and links. The new MicroCell is the black DPH-154 model which is replacing the white "Y" shaped models and you describe it. Functionally, they are currently the same. The only difference is that Cisco/AT&T has done away with the external antenna port and the Computer port. It's not a money making scam.
You can have multiple phones connected to the MicroCell at any one time without issues. One of the iPhones I assume has the phone number that is associated with the AT&T mobile account. That should be the phone number used to register the MicroCell with (what we call the primary number). The other iPhone, which I will assume is on the same account, needs to be added to the Approved Users List. Once you add the "problem" phone, turn off the phone and then turn it back on so that it can add the MicroCell to its cellular neighborhood.

IPod recognized on one PC, but not on another

Hi!
I just received a brand new iPod Click Wheel 20GB in exchange for my old one that had a hardware defect within the warranty period.
When I tried to connect the device to PC1 (WinXP) which I had always used with the old iPod without any problems, the new iPod was discovered in Windows, but not in iTunes, although the diagnostics feature in iTunes showed the iPod connection with a green "light".
I removed all other USB devices, re-installed iTunes 7.0.2. twice, reset the iPod a few times and also put it into disk mode. After some attemps, it was recognized by iTunes and started to synchronize songs (which are both imported from original CDs and purchased from iTunes). However, synchronization took a lot longer than it used to with the old iPod (approx. one song per minute now compared to one song per 5-10 sec. before). After some time (3GB in first try, 7 GB in second try) an error code ("1-24") was displayed and synchronization (which should have been 18 GB in total) stopped.
The next thing I did was to try to connect the iPod to PC2 (again WinXP), first using an older version of iTunes and a different library. It worked without problems. Then I upgraded iTunes to V.7.0.2. and it still worked. Then I copied the iTunes library from the PC1 to PC2 and again, it worked.
In connection with copying the iTunes library, another question emerged: I copied all folders unter \iTunes\iTunes_Music from PC1 to PC2. Strangely, only 1,500 songs were copied on PC2, while there are over 3,000 songs on PC1. I compared the directories in detail and found out that there were artists with and some without their own directory, which might be the reason for the difference, as songs of those artists had not been copied.
Hence, my questions to the community are:
- What could I do to make the connection of my iPod with PC1 work like it did with the old iPod and like it does on PC2?
- Where is the rest of the songs/artists that do not have a seperate directory?
Thanks for your help, cheers, Boern.

I have the same kind of problem. I installed the ipod on one comouter in my house, dont know what version of itunes but i dont think the latest one and registered it, then I installed it onto this pc with the latest version of itunes and windows dosemt recognise it. It makes me insall drivers like five times and sends me loads of messages saying things like it is installed and ready to use one minute, then found new hardware the next. And even now after I have installed everything and I dont get the messages anymore it still dosent come up in 'my computer.' Does anyone know what the problem could be?

DVD Compatible with one iMac, but not the other.

Hello, I have two iMacs in my house. Both running 10.5.8 OS. One is 2 GHz and one is 2.66 Ghz. The 2.66 is 24", while the 2 is 20".
I have some DVD media that works just dandy (that means "fine") on my 20" iMac, but it just ejects after a few seconds on my 24" iMac. Any ideas? I have tried restarting with a DVD in the 24, nothing. I am not sure what brand the DVD media is, all I know is that on the inside ring it says "IFPI BE22" - that's all I know about it.
To summarize, blank DVDs burn fine using iDVD and Finder on my 20" iMac, but my 24" won't even read them. Any ideas? Thank you!!

Get different higher quality media.
The best media is by Verbatim, Taiyo, or Ritek.
It also is stored in jewelcases, and not on spindles.
It also is burnt at less than its highest speed.
It also has no sticky label, and no ink based writing on the label, and you use the jewelcase inserts to determine what's on the disc.
Media of unknown source usually is not that high quality, and will have mixed results being read by different machines.

I'm having timeline playback issues on one user on an iMac but not on another

Similar Messages

Maybe you are looking for