I'm having trouble with my clone tool. When I am cloning it appears OK (the image within the brush circles is the correct colours) however once the cloning is done, it processes leaving me with a darkened blur. Any help with what's going on would be appre
I'm having trouble with my clone tool. When I am cloning it appears OK (the image within the brush circles is the correct colours) however once the cloning is done, it processes leaving me with a darkened blur. Any help with what's going on would be appreciated.
Which tool in Camera Raw, exactly? The Spot Removal Tool? Adjustment Brush?
Similar Messages
-
I have a special cmyk mix for a bcard in Indesign. When I export the pdf the cmyk mix has changed Just started today 1.13.15 Running Yosemite 10.10.1 Any help on what to look for would be greatly appreciated.
Thank you Peter. Someone else must have been on my computer because I do not change the settings. You pointed me in the right direction.
Thanks again.
Patrick -
My mac book pro freezes up at start up,it's doing it I would say 80% of the time.any help on what's going on?
Please verify you got this screen as well:
I had the same after updating fronm 10.7.1 to 10.7.2 tonight. Not even a re-install of the OS X 10.7 and Combo update to 10.7.2 helped. I think this time Apple messed up big time with the 10.7.2 update and some Mac Books (my case: MacBook 15" Mid 2009 = MacBookPro5,3)
If any Apple Support person reads this: Please get in contact with me. This is highly unusual!! -
I am having trouble downloading apps onto my iPad2. When I try a message appears " not enough local storage this can be managed in settings.". I ave tried by deleting unused apps, but the same message appears. How can I resolve this ? Help needed pleas.
Try rebooting the iPad as well. You might be getting an inaccurate reading and rebooting might clear that up.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the second point an end point. The pen tool stays active and I either have to click to isolate the path or I have to return to the first point and close the path. Please help.
artisttouch,
If you cannot close the Pen Tool by switching to another tool, as a temporary measure you may try pressing P (for Pen).
To solve it, you may try the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html -
Hello, I'm Bethany and I'm having trouble with my apple ID I tried to buy something from he app store and they assed me some questions and anyway i have locked my account and don't know how to unlock any help with be very helpful thanks.
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
I am having problems loading sampler patches into the exs24 sampler, when i got into edit menu and load multiple samples all the samples r greyed out and i cannot slect them, any help with this would be much appreciated
It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
How large is your hard drive and how much hard drive space do you have left? -
Sry for disturbing, but i would to ask that how to overcome the problem of synchronising ? Itune showing me that the sync session is failed to start with my Ipad mini. Any ideas about what is going on ?
What are you trying to sync?
I see you are on ios 7.
I also had upgraded my iPad Mini to ios 7 & then the 1st time I tried to open a Numbers file that was set up to sync w my MacBookPro, I got a warning that I would not be able to sync it any more w my Mac until I upgraded to Mavericks.
So if you are trying to sync Numbers, Pages or Keynote files between your iPad mini in ios 7 and a Mac that hasn't been upgraded to Mavericks that could be the problem.
I was very shocked to get that message since I bought Numbers on the iPad so that I could have a particular file on both devices & keep them synced. I had no clue when I upgraded to ios 7 on the iPad Mini that it would make it so the files in the iWorks apps woudln't sync any more.
So I finally decided to go ahead & upgrade to Mavericks after carefully preparing & updating other software so that it would work w Mavericks. But I got error messages so haven't even been able to download Mavericks & now having 2nd thoughts about doing so.
iPad mini ios 7
MacBookPro Mid 2012 Mountain Lion
iphone 4S ios 6 -
My iMessage screen is locked horizontally and will not rotate. When I access the camera through iMessage it will not rotate either. Any help with this will be very much appreciated.
Hi MikeyGway,
If you are having rotation issues on your iPad, you may find the following articles helpful:
iOS: Screen does not rotate
http://support.apple.com/kb/ts3805
iPad: Understanding the side switch
http://support.apple.com/kb/HT4085
Regards,
- Brenden -
My iPod touch was stolen and recovered. I can use my Apple id for this site but the theif changed the Apple id needed to update apps etc and I do not know how to delete his acct. Any help with this will be greatly appreciate
If the thief enabled activation lock on the device, then there is nothing that can be done. Only the password for the Apple ID that it is locked with can disable activation lock.
-
I purchased a Shakira movie (HD). I watch it OK in my PC, but when trying to watch it in my TV using Apple TV I get an endless rolling wheel. I can watch other Apple Store movies with no problem. Any idea of what's going on?
Welcome to the Apple Community.
Try repopulating iTunes with the problematic files. -
When I tap the Apple store, YouTube and the iTunes apps, they don' launch. Any help with this?
1. Double-click the Home button to close all Inactive Apps in Task Bar
2. Hold the Apps in Task Bar down for a second or two until you see the minus sign
3. Tap the minus sign to close App
4. Tap center of screen to return to Home Screen
5. Reset iPad. Hold the Sleep and Home button down for about 10 second until you see the Apple logo. Ignore the red slider -
I just installed Lightroom 5 but can't import photos, there is no import option anywhere. Get pop up saying error attempting to change modules.
I had this with the trial , then I purchased license and still happens. Any help with this ??<moved from Downloading, Installing, Setting Up to Photoshop Lightroom>
-
I have a 19 digit Adobe Photoshop Elements 12 Serial number. It should be 24. Any help with this?
Where are you looking for the serial number?
If you have the disks, the number commencing 1057 is usually inside the packaging. It’s necessary to pull out the white inner box.
If you purchased this some while ago and the product, the serial number should be in your Adobe account. Click on the red Adobe logo (top left on this web page) sign-in with your Adobe ID (email & password) and choose Manage Account. You should be able to browse your purchase history and registered products. -
i am trying to update the extension manager 6.0,8 i get an error (u44m1p7) any help with this issue please
That the CS6 version
Extension Manager 6.0.8 update
December 10, 2013
Macintosh | Windows
Photoshop: Basic Troubleshooting steps to fix most issues
Troubleshoot Update Errors
Many update errors are caused by missing or modified files required by Photoshop, typically by a disk cleanup utility (Ex: CleanMyMac, MacKeeper, etc). Make sure you have the latest updates for your clean-up utilities or discontinue use.
Explanations of error codes:
U = Updater.
44 = Install Update Error
M1 = Automatic
M2 = Standalone mode
P = Patcher
6 = Done With Errors
7 = Installation Failed
ISSUE: Installation failed. Error Code: U44M1P7, U44M2P7, U44M1P6
SOLUTION: Run the installer. Reinstall Photoshop CS6 to repair/replace the missing/modified file. Select Help>Updates… to run the updater again. http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
Maybe you are looking for
-
Dear Sir , i will be grateful if you could assist me to fix my ipad. it only display itunes logo. Ipad 32GB serial number v5052cmwetu
-
I am very new to Flex Builder 2 and AS3, I have Flex Builder installed and when I try to 'Run' the project I get the following; C:\Program Files\Macromedia\Flash 8\Players\SAFlashPlayer.exe Flex Builder cannot locate the required version of the Flash
-
My ipod 4g touch is stuck on an app page how do i get it off
my ipod 4 generation touch will not get off the textplus app how do i get it off
-
Is there an easy fix for this???
-
Restricting outbound plan to specific FXO ports
Does anyone know how to restrict the UC500 from using specific outbound FXO ports? Presently they have 2 ports; 1 for fax services and the other for voice services. However the dial plan ignores the port status and will squentially access the ports t