I'm new to mac. Just started out. Have OS 10.8.3. I have an HP 1315 printer.  It prints and copies, wont scan.  I see old threads on this, nothing recent.  ?can i make this work, or do i need a new printer??

I'm new to mac. Just started out. Have OS 10.8.3. I have an HP 1315 printer.  It prints and copies, wont scan.  I see old threads on this, nothing recent.  ?can i make this work, or do i need a new printer??

Hi Newbie111
I see that you are unable to scan with the Photosmart 1315.
What driver are you using?
The driver listed in the url below is a basic print driver that will allow you to print only.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ps242muc&c c=us&dlc=en&lc=en&os=1006&product=61956&sw_lang=
You can try using the apple drivers in the url below.
http://support.apple.com/kb/DL907
If you have any further issues please let me know.

Similar Messages

  • HT4528 icloud says maximum number of free accounts for this iphone  how can i make it work?

    icloud says maximum number of free accounts for this iphone  how can i make it work?

    You have created too many accounts. There's no way to get around this.

  • I've recently brought an iPhone 5c and I want to transfer all my pictures and phone numbers over from my old 4s without using iTunes how can I do this as there's already a iPhone synced to the laptop I would use to back it up

    Just need some help. As the question says I need to transfer all my numbers pictures videos onto my new iPhone 5c from my 4s but as the laptop I would use has already got my partners iPhone linked to it I can't back it up as it just syncs all there stuff onto it to. How else can I do this without linking it to the computer?

    What does the family WiFi have to do with iCloud? iCloud is on Apple's servers.
    If it is a shared computer what you can do is create a new user ID on the computer. Log in with the new ID. This will give you a "clean" iTunes library that you can use for backing up the the old phone and syncing the new phone.

  • I have a Dell v715w printer and can't make it work with my macbook, need help

    I have a Dell v715w printer and am having difficulty making it work with my MacBook Pro, need suggestions.

    Hi,
    The printer do support AirPrint (the HP Deskjet 3525 is part of the 3520 Series).
    Make sure your printer connected to the same router as your iPad and it shold be listed..
    Be aware that you need iOS 4.2 or higher and your router should support Multicasting for AirPrint to work..
    If the printer isn't listed please clarify your router brand and model, some routers don't offer Multicasting or have the protocol disabled by default.

  • It all was say please contact iTunes support to complete this transaction how can I make this I did not anderstand any thing

    Hi please help me I can't buy any thing please help me !!!!!!!,,!!!!!!! Please

    You can contact iTunes support here : http://www.apple.com/support/itunes/contact/

  • Need to add condition to a template and can not make it work.

    I am trying to add a condition to a template and can not make it work. Mainly because I am new at this. I have a field that needs to have a condition set. The field is LTD. The maximum value is $233.00. If the amount is less the 233, that value is used. If it is over 233 then 233 is used. So, if LTD is greater then 233.00 then 233.00 else LTD.
    Can anyone help me write this for a Word BI Publisher Template. I need this report now but can't go to class until later this year.
    Thanks,
    Rick

    Replace LTD with the correct element name.
    <?choose:?>
    <?when: LTD > 233 ?>233<?end when?>
    <?otherwise:?><?LTD?><?end otherwise?>
    <?end choose?>

  • Need an iphone for dev work - just starting out

    Hello
    I'm just starting out with iphone development. I already have another mobile service that I use for personal use so don't have the need for iphone personally. I just want to buy it for development work and will be using my WiFi network as the internet bone.
    I dont want to get into a contract with at&t for 2 yrs. Does that mean I will need to buy an iphone for the regular price? Or can I get one cheaper than usual just for dev work?
    All responses appreciated.

    thanks again Tamara.
    I googled a bit and found this post-
    http://alexking.org/blog/2007/07/02/iphone-without-service
    I wonder if this is indeed true.
    In any case, I'm strongly leaning towards the ipod touch. Does not having a GPS mean, location based apps won't work? So if I want to download an app that relies on my current location for e.g. to tell me whether my friends are closeby, such an app won't work? Hmm...in that case GPS seems to be necessary.

  • I have a new MAC MINI and I want to install a second monitor.  I have one connected to the HDMI and it works.  I can't get a signal to the other one.  It is connected from the thunderbolt to its HDMI port.  How can I make it work?

    I have a new MAC MINI and I want to install a second monitor.  I have one connected to the HDMI and it works.  I can't get a signal to the other one.  It is connected from the thunderbolt to its HDMI port.  How can I make it work?

    Could be a bad cable or bad Thunderbolt port.
    You have 90 days of free telephone support on a new device. You can call them at 1-800-MY-APPLE. Have your Mini's serial number handy
    You can also make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Hi. There is a ghost search bar on my iMac screen which flashes constantly, even during start up and shut down. How can i make this go away? Please help. x

    Hi There is a ghost search bar on my iMac that flashes continually, even during start up and shut down. How can i make this go away? Please help. x

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Upon start up of my laptop I get a APS Daemon.exe system error - MSVCR80.dll is missing.  This just started out of the blue.  At one point it told me to reinstall ITunes.  Is that truly necessary?

    Upon start up of my laptop I get a APS Daemon.exe system error - MSVCR80.dll is missing.  This just started out of the blue.  At one point it told me to reinstall ITunes.  Is that truly necessary?

    I have the same issue after installing the new update and reinstalling iTunes doesn't fix the issue.
    I found disabling Apple push (APSDaemon.exe) from the start up will stop the error from appearing, however this will disable wireless syncing. If you don't use it than it shouldn't be an issue.
    I'm using a PC so you can disable it using the msconfig command and turning it off in the Startup tab. I don't know if Mac users are experiencing the same issue. Hopefully Apple will fix it in their next update.

  • HT5625 I cannot send a text thru iMessage.  I followed the directions over and over again but can't make it work.  Also how can I find out all the apple ids I may have.

    I cannot send a text thru iMessage.  I followed the directions over and over again but can't make it work.  Also how can I find out all the apple ids I may have.

    A wet phone is out of warranty. This is considered user damage. Even if you were able to get it to start now, the chances of it working for long are slim. I suggest going to Apple and see about an OOW replacement. One for the iPhone 4 is only $149USD and it would come with a short warranty. It is a refurbished device and you would not be worried about encountering additional problems.

  • Until the most recent update when the autocomplete location bar was selected, it "went" with no further clicking. Now I have to click the refresh arrow. It won't even work with the return. How can I make it work the old easier way?

    Until the most recent update when the url that I wanted in the autocomplete location bar was selected, it "went" with no further clicking. Now I have to click the refresh arrow. It won't even work with the return. How can I make it work the old easier way?

    cor-el, thank you so much. That fixed it, but does this mean I can't use AVG Safe Search.Is there a substitute? I do like the security (hopefully real) that it offers. What now? How do I get out of Safe Mode?
    Sherry

  • Just bought a new iMac and it is telling me it will take 27 hours to transfer documents from the old one!! Is this normal? Can I speed this up some how??

    I just bought a new iMac and it says it will take 27 hours to transfer documents from the old mac! Is this normal? Can I speed this up??

    If you are transferring with Wi-Fi or Ethernet and you have to transfer a lot of files, it's normal. Wi-Fi and Ethernet are the slowest methods to transfer files.
    Instead, you can check if your old Mac has got a FireWire 800 port. If so, you can get a Thunderbolt to FireWire adapter and a FireWire cable, so the transfer will be done by FireWire, making the migration faster.
    If you don't want to spend money, continue the migration. Another thing you can do is to get an external drive, make a Time Machine backup of your old Mac and use the backup to transfer your files to the new Mac. Read > http://support.apple.com/kb/HT4889?viewlocale=en_US&locale=en_US

  • Just restored my iPhone from iCloud. My wife and I have always shared one iCloud ID. But since my restore, when a call comes in, it rings on both my phone and hers. How can I make this stop?

    Just restored my iPhone 5  from iCloud. My wife and I have always shared one iCloud ID. But since my restore, when a call comes in, it rings on both my phone and hers. How can I make this stop?  We had it all set up fine before the restore, and there was a trick to it in the settings.  I've noticed that since my restore, her phone has picked up what looks like the symbol of a phone in the upper right corner of the display, right next to the Bluetooth symbol.

    Hi Big Slick,
    Welcome to the Apple Support Community!
    It sounds like your iPhones may be using a new feature in iOS 8 called Continuity. The following article and information explains how to set up this feature for phone calls. You can review the information on the setup to reverse this effect. My suggestion would be to turn off FaceTime on one of the devices.
    Connect your iPhone, iPad, iPod touch, and Mac using Continuity
    Phone calls
    With Continuity, you can make and receive cellular phone calls from your iPad, iPod touch, or Mac when your iPhone is on the same Wi-Fi network.
    To make and receive phone calls, here's what you need:
    Sign in to the same iCloud account on all your devices, including your Mac.
    Your iPhone and your iPad or iPod touch need to use iOS 8 or later. Your Mac needs to use OS X Yosemite.
    All devices must be on the same Wi-Fi network.
    All devices must be signed in to FaceTime using the same iCloud account. This means any device that shares your Apple ID will get your phone calls. Look below for instructions on how to turn off iPhone cellular calls.
    Wi-Fi Calling needs to be off. Go to Settings > Phone. If you see Wi-Fi Calling, turn it off.
    Cheers,
    Joe

  • I can't get my camera to work. Do I need a new phone. I did recently experience some water damage.

    I can't get my camera to work. Do I need a new phone. I did recently experience some water damage.

        I can totally understand the need of a working camera, Andrewmartin! Let's review your options! Do you have insurance coverage? This can help with replacing the phone because of the water damage. If so, file a claim here http://bit.ly/07CrqPK .
    Ed_VZW
    Follow us on Twitter @VZWSupport

Maybe you are looking for