I'm on a label sheet of ten labels, trying to duplicate the ingredients on one label to all the other nine. How do I do this.

I'm using a MACO ml-1000 label sheet for ingredients of my beef jerky. It has 10 labels/sheet. I've typed in the ingredients on one label. How do I duplicate that one label over to the other nine labels?

Hi makaainana,
I tried to paste the label off the desktop to the label in TextEdit,
What is the file type of the label on your desktop? How did you create it? How did you copy it?
This may work. In TextEdit, make the document Rich Text.
I copied a screen shot from my desktop and that pasted into TextEdit. I don't know what else will paste.
Regards,
Ian.

Similar Messages

Tab labels are grayed out except for active tab. This was not always the case. How to fix this?

I recently had the 29 upgrade forced on me. I did not like the new lay out. I was trying different things and I hit the restore defaults button. After I did this, any tabs that I had open that were not the active tab, the labels was grayed out. I want the labels to stay the same. How do I get this fixed?

Why do I have to install an extension to get back to the style I want to use? This is ridiculous.

Service entry sheet release flag is not appearing in the change mode.

Hi,
In Service entry sheet release flag is not appearing in the change mode(ML81N). though release strategy is exsists in the header level.
note:
1.No changes done release setting, classes, or any other parameter.
2.Last day Few service entry sheets have been released by user .
3.And also i tried with different user , whereas he is geeting release flag, but concern user is not getting?
wht could be reasons?
Please provide suitable solution.
regards,
kumar.

Issue here is user is having authorization issue. Please run ML81N and execute /NSU53 report.
Also execute ML81n and then /NSU53 report for the other user whos does not have this problem. Then send both the reports to Security team asking them to add the missing object in the user's role who has the problem.
Hope this helps.
Ganesh

TS1702 In the numbers app 1 spreadsheet keeps trying to update. It is an excel sheet and I can not delete the sheet as it keeps trying to update? Any help would be appreciated.

In the numbers app 1 spreadsheet keeps trying to update. It is an excel sheet and I can not delete the sheet as it keeps trying to update? Any help would be appreciated.

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Text is not being displayed in sync on a label when looping through a list -- how to fix?

I have a list of states (50 states). I loop through this list (in a winform app -- VS2012) and want to display the current state ID that is being processed in the loop in the text property of a label. I precede the label.Text = StateID line with
Application.DoEvents() but I am also (in Debug mode) writing the same text to the console. The console displays correctly, but there appears to be a lag in the label.Text property
List<string> StateList = new List<string> { "al", "ak", "az","ar","ca","co","ct","de","fl","ga",...};
foreach (string stateID in StateList)
Application.DoEvents();
lblStateID.Text = "State is " + stateID; //--there is a lag here
I vaguely recollect something about a NotifyPropertyChanged event. I know this is common in WPF, but is there something similar in winform? Or is there a way to make the desired text to be displayed in the label.Text property in synchronization
with the loop?
Rich P

Thank you. This is way simpler than implementing the INotifyPropertyChanged Interface. Although, here is an article on the INotifyPropertyChanged Interface and event
http://msdn.microsoft.com/en-us/library/system.componentmodel.inotifypropertychanged(v=vs.110).aspx
Rich P

My itunes will not work at all. i have deleted and reinstalled in over ten times, i have ended the process, i have reinstalled quicktime i few times, i have deleted many folders. What else can i do? Please help:(

My itunes will not work at all. i have deleted and reinstalled in over ten times, i have ended the process, i have reinstalled quicktime i few times, i have deleted many folders such as TEMP, itunes helper et What else can i do? Please help:(

Now it sometimes keeps coming up and working but once i plug an ipod in it freezes my whole computer up and no i dont get any response from itunes at all

ITunes RADIO is not working. "iTunes could not connect to the iTunes Store. Make sure your internet connection is active and try again." Try as I may, as many as ten attempts, trying to connect after restart, after shutdown, nothing works. Just so - iTu

iTunes RADIO is not working.
“iTunes could not connect to the iTunes Store. Make sure your internet connection is active and try again.” Try as I may, as many as ten attempts, trying to connect after restart, after shutdown, nothing works. Just so …
iTunes STORE not “connectable” with my otherwise perfectly-working internet connection, viable, up and running for all other uses.
Simply put, firstly, I can't connect to the internet when I click on Radio. People are quite suspicious that this is Apple incompetence or your company's famous arrogance for this commonly-suffered problem that you won't or “can’t” fix.
Read the many web comments and you won’t be pleased with yourselves: the suspicion is that if you ruin internet radio on iTunes, Apple will somehow make more money on music downloads, etc. Bull.
Also, thirdly, my old playlist of 20 or so internet radio stations in the Ambient category STILL PLAYS !
Then fourth, I installed the latest available version of QuickTime Player 7.app Version 7.6.6 but it didn’t solve the problem either. I had QuickTime Player.app Version 10.2, but substituted what Apple website said was the latest, LOWER NUMBERED QuickTime Player version of 7.6.6
Fifth, I can't connect to iTunes store no matter what I do or what user group's advice I try. So I can’t buy or download anything from iTunes. Bad for business.
Sixth, I updated to the latest version of iTunes but this weird problem remains. All suggested Apple fixes or user group fixes are useless. Where is Apple’s famous technical competency, vaunted customer support?, and user-friendly product reputation? Get it back, please.
Solve this problem of yours ASAP for us, your numerous disgruntled, dissatisfied customers of iTunes. You can do better, should, and really –in all fairness- must.
===============================================================
NOTE: no password for iTunes exists in my Keychain. Is this a problem?
Apple ACCOUNT ID, and iTunes ID password, works but not to access iTunes with my healthy internet connection.
Apple store id It works via direct internet connetion but not through iTunes. Very strange.
===============================================================
FYI, Hardware Overview:
Model Name:                       MacBook Pro
Model Identifier:                 MacBookPro8,2
Processor Name:               Intel Core i7
Processor Speed:               2 GHz
Number of Processors:    1
Total Number of Cores:    4
L2 Cache (per Core):         256 KB
L3 Cache:                            6 MB
Memory:                              16 GB
Boot ROM Version:            MBP81.0047.B27
SMC Version (system):      1.69f4
Serial Number (system):   C0*******F8V
Sudden Motion Sensor:
State:   Disabled
Intel 6 Series Chipset:
Vendor: Intel
Product:            6 Series Chipset
Link Speed:       6 Gigabit
Negotiated Link Speed:           6 Gigabit
Description:      AHCI Version 1.30 Supported
M4-CT512M4SSD2:
Capacity:           512.11 GB (512,110,190,592 bytes)
Model: M4-CT512M4SSD2
Revision:           040H
Serial Number: 0000000012330912E75A
Native Command Queuing:    Yes
Queue Depth:   32
Removable Media:        No
Detachable Drive:        No
BSD Name:         disk0
Medium Type:      Solid State
TRIM Support:     Yes
Partition Map Type:     GPT (GUID Partition Table)
S.M.A.R.T. status:         Verified
Volumes:
disk0s1:
Capacity:           209.7 MB (209,715,200 bytes)
BSD Name:         disk0s1
Content:            EFI
disk0s2:
Capacity:           511.25 GB (511,250,432,000 bytes)
BSD Name:         disk0s2
Content:            Apple_CoreStorage
Recovery HD:
Capacity:           650 MB (650,002,432 bytes)
BSD Name:         disk0s3
Content:            Apple_Boot
Volume UUID:   600737FB-7A29-3BAE-859E-CBFE2E90C39A
<Edited by Host>

This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
I live in Europe ,So Be persistent and don't give up ! Aug. 2013

The sheet I am working on has lost the ability for me to scroll to the first few columns. I can't see the columns but I can cut and paste them so I know they are still there. Has this happened to others

The sheet I am working on has lost the ability for me to scroll to the first few columns. I can't see the columns A & B but if I cut and paste the table to a new sheet, the columns I am missing will travel to the new sheet. I have charts and other stuff related the the original table so I need to figure out why I can only see from column C forward. I tried to "UNHIDE" the columns but the function doesn't seem to recognise that there are columns missing. Has this happened to others and how did you fix it?

I've seen it happen before, or at least it sounds something like what I've seen before. The table somehow gets into the margins of the page and the app doesn't know how to deal with it. Go into Print View and try moving the table away from the left side ofthe page. You might have to change content size or resize the table to get it to correct (then put you can put them back the way you like).

I just installed Firefox 29.01 and the text labels on my toolbar have disappeared and there doesnt seem to be a way to put them back. How do I do this?

MY QUESTION IS EXACTLY THE SAME AS THE USER BELOW ASKED (WHICH I HAVE PASTED BELOW), AND HE GOT A STANDARD (AND USELESS) RHETORICAL ANSWER FROM THE SUPPORT STAFF. PLEASE LOOK AT THE SPECIFIC QUESTION ASKED AND DO NOT ANSWER WITH A GENERIC ANSWER LIKE "THIS IS HOW TO ACCESS THE CUSTOMIZATION SCREEN" BECAUSE I FOUND THE CUSTOMIZATION SCREEN WITHOUT HAVING TO ASK AND THAT SCREEN DOES NOT SHOW HOW TO TURN ON THE FEATURE I NEED! DO YOU WONDER WHY I USE ALL CAPS? IF YOU READ THE ACTUAL QUESTION WHEN IT WAS WRITTEN IN LOWER CASE, I WOULDN'T NEED TO USE ALL CAPS!
Last night I updated to Firefox 29.0.1. Now, I don't mind change - and I don't mind redesigns - but I HATE it when options are removed. I want text labels on my buttons (the "Home" button for example"). In the previous version of Firefox you could right-click in the grey space at the top, and select "customise". From there, you could drag and drop which things you wanted to appear in your toolbar or not - and there was a tickbox to selext if you wanted text labels to appear underneath them or not. Now as hard as I look, I can't find this option. It looks like you're now forcing people to ONLY use icons. I hate that. My brain processes the word "Home" a lot faster than it recognises a little picture of a house. You need to understand that people work in different ways - and just because the Firefox developers might not personally use the text labels, that doesn't mean that no-one does!

I agree with whereitis above, I hate it when options are removed (ex: the Bookmarks side panel (Ctrl-B) button missing) etc.. Firefox's major BOLD one-liner is: CUSTIMAZATION. Now to regain this CUSTIMAZATION freedom, Firefox suggest to solve this by installing the ADDON "Classic Theme Restorer". I don't want to install any ADDON to customize Firefox! I went with Firefox because it was CUSTOMIZABLE, and that is the only reason why I went with this web browser! Now, Firefox is asking me to add an ADDON to CUSTOMIZE it. What is this?!

How can I print multiple copies of the same photo onto one sheet of paper? Do I have to Duplicate the photo in iPhoto and then select them all?

How can I print multiple copies of the same photo onto one sheet of paper? Do I have to Duplicate the photo in iPhoto and then select them all?

no - you simply have to select the option to print mucliples of a photo on a page
select the photo and go to the file menu ==> print - select the printer, paper size and print size and click customize - in the tool bar click on the settings icon (the gear looking thingy) and select "multiple of the same photo per page" and the preview will reflect this option showing a full page of the selected size photos
LN

In Address Book, I would like to have a field "File As". So, l can list "Joe Smith", as "The Smith Family". I will use this when I print labels for Xmas cards and such. Thanks!

In Address Book, I would like to have a field "File As". So, l can list "Joe Smith", as "The Smith Family". I will use this when I print labels for Xmas cards and such. Thanks!

In Address Book, I would like to have a field "File As". So, l can list "Joe Smith", as "The Smith Family". I will use this when I print labels for Xmas cards and such. Thanks!

My iPhone 5 appears to be using too much memory, particularly 7.9GB out of the 32GB labeled "OTHER". Even my iPad Air has only 3.9GB labeled "OTHER". How do I identify what "OTHER" is actually used for and how do I mitigate this?

According to iTunes I am using approximately 20.35GB of the available 27.32GM of memory, leaving about 7GB free. Of the used memory, about 7.9GB is labeled "OTHER". Making the same measurement on my iPad Air, only 3.9GB is labeled "OTHER". Why am I loosing so much memory capacity and what do I do to mitigate this problem?
This is having a significant effect on using my iPhone for recording Video interviews which in some cases constitute two to three hours of video. I need to be able togged the "OTHER" memory space so I can do more than one video recording during a session. Lowering the "OTHER" category to 3.9GB, the same as the iPad Air, would make it possible to record two or in some cases three videos before having to offload them to the MacBook Pro for editing in the evening.

Charliebear88 wrote:
No. He mentions freeing up storage on the iPhone, Mac, and hard drive. I'm looking for just the iPhone, and his suggestion for that is downloading some program.
No, it's not, if you would actually read the linked information like I said. There is plenty of information in this link about how to reduce or eliminate your 'Other' data without using third-party programs or procedures:
http://appducate.com/2013/01/reclaim-other-storage-space-on-ipad-iphone-and-ipod /
• Delete Browser Cache
• Delete Mail account and re-add
• Delete Text Messages
• Empty out the Reading List
• Delete iTunes Backups
• Backup to iCloud instead of iTunes
• Restore as new then restore the backup
• Restore as new, but don't restore backup

When I try to attach my css style sheet Dreamweaver gives me an error saying that my .css file appears to be an .html file and will not attach. How do I fix this so I can attach my style sheet?

I have built a css style sheet in Dreamweaver. When I try to attach it to my html website, it prompts me that my "css file appears to be an .html file and cannot attach". I've tried removing the /* */ as suggested by other forums, but this has not resolved the issue. I was using css style sheets with no problem 2 days ago. Now I get that error message. How do I fix this so I can attach my style sheet?

What does the code of the CSS file look like?
An external CSS file needs to be written in CSS only (no html tags like <html>, <body>, <head>, etc ).
It also must have a .css file extension, if yours has a .html extension it won't work.

Service entry sheet can't be changed to update the final entry indicator

Hi All,
Can any body suggest possible reason and a solution for the below?
I am having a situation in which for a service P.O for which partial service enty has been done and for that invoice has also been done.(In production)
Now when I am trying to close the P.O line item by going to service entry sheet by t.code ml81n there i am not able to get the change icon , and hence i am not able to revoke the acceptance of service entry and subsequently I couldn't be able to set the final entry for that.
I tried to do the simulate the same senario in development(testing client) server and it is working fine, could any one sugget the reason and solution how to close the service line item in the P.O .
Regards,
Sushanta

Hi,
That was useful but I checked some other service P.O and for them I am able to see the change icon.
the p.o in my earlier mail are old one of 2002, but they are having partial service entry and invoice against them,
Could any one please tell me under what circumstances I will not be able to see the change icon in the service entry sheet?
Is it if the service entry is done at an old date, i mean earlier date or any other reason.
please let me know soon
Thanks
Sushanta

Trying to change the labels for some UI elements

hi,
Problem: I am trying to change the labels for some UI elements and transport the views from one server to another server.
the lables show changed in the source server but the changes dont reflect in the destination server
Kidly help me to slove this problem

Hi Sharad
The process is as explained:
1.     Firstly, go to the respective view, and to the Label and then delete the Label Text as
                mentioned in the attribute u2018TEXTu2019 of the Label in the view.
2.     Next, Activate the View, if it asks for a change request, please assign it to a new TR.
3.     Finally give the Label text again and then Save it and activate it.
4.     Further transport the request to ECP and find the difference.
This especially happens when we frequently change the WD Component and embedd it entirely in the Transport.
I hope this information would be of a great help to all of us.
Ponts if helpful.
Regards
Roshan

I'm on a label sheet of ten labels, trying to duplicate the ingredients on one label to all the other nine. How do I do this.

Similar Messages

Maybe you are looking for