I'm trying to change my apple ID and it says it has been verified, but it still will not change on my phone, so I cannot access my iCloud or iMessage, what am I supposed to do to fix this problem?
I have been trying to change my Apple ID for my iPhone account because the e-mail on there is an old e-mail that I cannot use anymore. I have went on the website and went through all of the steps of changing it, and I've changed everything to my updated e-mail and verified it as well. On my phone, it still has my old e-mail address, and keeps popping up any time I try to access iCloud, iMessage, etc. that my password or e-mail is invalid. I'm not sure why it's not changing on my phone or what other steps I'm supposed to take in changing it.
If they are no longer in your camera roll, save them to your camera roll before deleting the account (open your my photo stream album, tap Select, tap the photos, tap the share icon -- box with upward pointing arrow, the tap Save to Camera Roll).
Similar Messages
-
Wifi will not work. The button in settings seems to be locked. Tried control panel and siri to turn it on, doesnt work because the settings wont turn it on. Need help ASAP cause my data limit is approaching.
If the battery was completely drained the iPad will not respond for some time after connecting it to the charger. Connect the iPad to the charger that came with it and plug that into a good wall outlet. Wait 30 minutes. Then reset the iPad.Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.
If the iPad restarts let it continue to charge until it's battery shows fully charged. If the iPad still does not start Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. Be sure to back up your device before taking or sending it to Apple. -
my ipod touch brightness just went to zero after charging it. i've tried adjusting it to 100% but it still does not changed. can anybody help me solve this problem? thankS!
Have yu tried the standard fixes:
- Resetting:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restoring the iPOd via iTunes. First from backup and if problem persists, restore to factory defaults/new iPod
- Make an appointment at the Genius Bar of an Apple store since you likely have a hardware problem -
I am trying to upgrade to iTunes 11.4 on my Windows7 PC and get an error message that says " iTunes has an invalid signature. It will not be installed" How do I fix that?
Hi curliejo,
Welcome to the Apple Support Communities!
In your situation I would recommend the steps in the following article for troubleshooting iTunes. It may be necessary to completely remove and reinstall iTunes in this situation. Be sure to remove all of the components with iTunes in the correct order as outlined in the article before installing fresh.
Issues installing iTunes or QuickTime for Windows
Have a great day,
Joe -
Whenever I click on iTunes store, it just takes me to this huge add to download the new version of iTunes. I have tried clicking the download box and downloading it, but it still will not let me past the add so I can buy music. What gives
this is a follow up from the profane post earlier....
i have done this twice in two other posts..
here is my problem.. i started off trying to update itunes, it failed twice and said i needed to install manually via tools.
the only place to get to tools is the pop up box that appears when you click check for updates.. if there is an available update then the pop up shows up with the quick time and itunes files to download. so i finally figured that out. i clicked on tools and manual update, four files were saved to a file. Apple mobile device support, another one similar, itunes, and another one i cant remember. I only downloaded the itunes file seeing as though thats all i needed to accomplish in the first place.
so then i restarted my computer bc you need to reboot and then reopen itunes for update to take effect. once i have itunes back open i plugged in my new 5s which i am trying to sync to my computer to get all my stuff back bc i lost my previous phone over the weekend.. once i plugged the phone in an error stating i needed to unistall the apple mobile device support and itunes and then reinstall. well i dont know where those files were originally stored on my computer AND since my itunes was updated, just not the other 3 associated files, when i click check for updates it says its up to date and then pop up containing the quick time and itunes does not pop up thus i cant get back to the tools tab to manually save the 4 files again.
so i was just going to uninstall itunes all together and then i thought well what happens if it erases all my photos apps songs etc... which would defeat the whole purpose in the first place of me trying to sync my new phone to get all my stuff back.
so i literally have no idea what to do at this point.. if you have read this you are probably just as confused as me... -
My phone started vibrating mutiple times last night and the screen went black, and then it stopped and now I dont have a clue what to do. How should I fix this problem because I cant turn it back on? I have only had my phone for 2 months.
I also live an hr away from the Apple store, so its not the best thing to go there just to ask a question and find out what to do
-
i downloaded the GV app to my iphone but i'm trying to set up the app and it says it can't connect to google when i try to sign in to my google account.... any ideas what's wrong? i can access my gmail account just fine with my gmail app on the same phone
What's a GV app?
-
I am trying to verify my Apple ID and it says it has sent me a verification email and I haven't received it. I have checked the email and it is correct, why isn't it working ?
The verification email is not sent immediately so be patient and wait a while.
-
How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?
The system I'm have is a Mac-mini that had SL on it and no SuperDrive. I have also call Apple Support and they have really have not been to much help over 1st did my up grade to Lion and Installed the Lion Server.... it lost my SSL that I paid for and kill almost on of my server setting, plus kill all my web servers (using apache vhosts), and not to say the LDAP will even let remote users login to your laptops.
PS: There is no way that I'm going to buy a Install USB from Apple... They have over billed me over $300.00 because the Apps Store still has bugs (Glad I did not write that App/Service)
If there is anyone that can give in the information to create a USB install stick, I would be very thinkful.Here you are bro, courtesy of "softpedia.com"....brilliant site!!!
If you ever had problems with your Mac OS X installation you know that the first thing you should do is to check the startup volume using Disk Utility.
After the check has ended and, if the errors exceed a certain level of seriousness, the Disk Utility application will require you to restart your Mac and use its Mac OS X Install disc counterpart.
Other users may have to reinstall OS X altogether, but will find, or already know, that their SuperDrive (a CD/DVD reader and write combo drive) is not functioning properly and it will not be able to read the Install disc.
Although this might happen to Mac OS X Leopard users due to faultyhardware, the vast majority of problematic SuperDrives will be encountered inside Snow Leopard running Macs.
This is due to the updated SuperDrive firmware included in either the Install disc or the software updates one has to install to reach the latest version of OS X, namely 10.6.6.
This can be fixed by flashing the SuperDrive’s stock firmware using free command line tools that one can find for free online (I will write about this process also, but at a later time because this article only focuses on allowing you to create your own alternative USB boot disc).
If you are reading this last bit of information with skepticism, than you should know that it happened to me too. Despite all my tries to make it work properly, the SuperDrive kept on munching any inserted DVDs and just popped them out in about twenty seconds.
The workaround to this issue was to create my own Leopard bootable USB memory stick. I am not suggesting a Snow Leopard bootable stick mainly because there are lots of users that have decided to buy the cheaper, Upgrade version, which I have not tested and, therefore, I’m not sure if it will work properly once written to a USB disk.
And now, here are the exact steps you should follow in order to obtain a fully bootable Leopard (or Lion) Install disc.
Step 1 (If you already have the Leopard install disc DMG file you can skip to Step 2)
Launch Disk Utility (you can find it inside /Applications/Utilities). Here select the Leopard Install disc in the list of drives on the left and click on the New Image menu entry at the top of the window. A save message will appear where you will have to select the Desktop as a destination.
Step 2
After Disk Utility has finished creating the Leopard DMG, insert your USB stick and erase all data and reformat the disk. To do this select the USB in the list of drives on the left and, after clicking on the Erase tab on the right side of the window, choose the Mac OS Extended (Journaled) format and click the Erase button beneath.
Step 3
After the USB has been reformatted, download the SuperDuper app from HERE and launch it. Once SuperDuper starts, you will only have to select the DMG in the Copy drop-down menu, your USB memory stick on the right and hit the “Copy Now” button.
One can also use Disk Utility for this task but creating a bootable USB stick failed 2 out 4 times when copying the DMG to the stick (with the exact same settings each time). Creating the bootable stick using SuperDuper proved to be the perfect way to do it because it worked each of the 4 times I tested it.
The steps above can also be used to create a bootable Mac OS X Lion USB by using the InstallESD.dmg image you can find inside the Lion installer (named “Install Mac OS X Lion.app”) downloaded from the Mac App Store in the /Applications folder.
To locate the InstallESD.dmg right click the Lion installer, select the “Show Package Contents” entry, go inside the “Contents” folder, and from there into the “SharedSupport” folder. Inside this folder you can find the InstallESD.dmg you can use to create your own bootable Mac OS X Lion USB stick. To do so, go to the third step described above and use the InstallESD.dmg as the DMG to be copied to your USB disc.
That’s it! Once the process ends you will have a fully bootable Leopard (or Lion) USB disk that you can use as an alternative to the Apple’s DVD Install disc that comes bundled with all Macs.
To use your newly created bootable disk you will have to restart the Mac, press and hold the OPTION key until the StartupManager appears. Here, select the Mac OS X Install disk using your keyboard arrows and press return to start from the selected drive. -
I am trying to download an app but it says it requires iOS5. I have iOS5 but it still will not load. What do I need to do?
If you haven't used your apple ID in a long time, Apple discards it. Contact tech support to activate your old one or to get a new one.
U.S. iPhone technical support:
(800) MY-IPHONE (800-694-7466) -
I cannot get my messages/text messages to work om my Hi. I am sending this thru my iPad. Respond and let me know you got it. Fun fun fun. . I did go and try to another Apple ID different from my iPhone but it still will not work. Can anyone help me?
chicx wrote:
This is the third time of writing this on your Apple Support Communities!
Not with your current user id.
Far too much uneccesary information in your post, which only confuses things, a vast amount!
Let's start with iTunes.
Have you updated iTunes to 11.1.5, because the previous version did appear to have an issue about seeing iPods?
With iTunes 11.1.5 installed, look in Edit/Preferences/Devices, (or use the ALT key, followed by the E key and then the F key) and make sure that the box named Prevent iPods, iPhones and iPads from syncing automatically does not have a tick in the box.
Once you have doen those two things, check to see if the iPod is seen by iTunes.
chicx wrote:
By the way, what does IOS mean? (I thought IO stood for operating system, but am flummoxed by the S on the end.
Really?
OS stands for Operating System. (In computer speak, IO means Input/Output.)
iOS originally stood for iPhone Operating System, but it now refers to the iPod Touch and iPhone. The iPod Classic, which you have listed in your profile as your iPod, does not use iOS.
I assume that you have been listening to the Podcast in your iTunes on the computer as you cannot transfer it to your iPod. It's what I'd do. -
I have been using firefox for over a year with no problems. All of a sudden it has quit opening. I thought it might be something in my computer so I uninstalled firefox and reinstalled it from your web site. It still will not open. What do I do now???????
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
See also:
*http://kb.mozillazine.org/Browser_will_not_start_up -
my iphone 4 lock button does not work, i turned it off using assesive touch, now it wont turn back on? got any tips for fixing this problem!
Hi, braidenwhitesidemate.
Thank you for visiting Apple Support Communities.
I would recommend going through the steps in the article below. If the issue persists, see the section labeled Issue not resolved.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Cheers,
Jason H. -
How to forbid any further changes for PO (QTY and price ) after it has been
Hi,
How to forbid any further changes for PO (QTY and price ) after it has been done GR and LIV? Thanks.Hi,
Price anyway cannot be changed once GR is posted on the PO item, it can be changed only by cancelling the GR, the same applies to IR too.
But quantity can be changed at any time.
So if you are looking at blocking qty too, then a customized message through save exit is the option, I am not aware of any standard SAP messages that can be configured to achieve this..
Ramesh -
MacBook Pro 10.6.8 My @me account has been wiped of all mail, will not send or receive and iCal will not recognise user name or password even though i haven't changed it. All this after a scheduled software update. Any ideas??
kwmlr439 wrote:
CSOUND Read the title please:
Re: Macbook Pro 10.6.8 RAM Upgarde to 8 GB
The amount of RAM is not dependant on the operating system. It is all about the model of you Mac.
10.6.8 is the version of OS X that is installed on your system. It has no real baring on the amount of RAM that CAN be installed.
Personally I have never had good luck with Corsair RAM. I have always had good luck with Crucial and Kingston.
Message was edited by: Shootist007
Message was edited by: Shootist007
Maybe you are looking for
-
Typekit desktop fonts are synced but the fonts are not working
I'm new to Adobe Creative Cloud services and immediate have noticed that Typekit is hit or miss. I have no trouble syncing the fonts on Typekit.com, they show as synced in my CC control panel. Photoshop CC sometimes even recognize the missing fonts a
-
Can I use iCloud on pc if I didn't create iCloud account on my iphone.
I installed iClode on my pc but can't finish installation. Get message "Your apple id is valid but is not iCloud account" What to do? Thanks /Zemira
-
Dear Experts Can you please tell me why reconstruction tab is not available in BI7,whereas it was there in BW 3.5.If the flow is PSA,DSO,and CUBE:Answer could because of IP supply data to PSA to Datatargets(it include dso and cube),PSA is the only so
-
Where is my facebookvideocall.bundle file.i cannot locate it in internet plug-ins
i cannot locate it in internet plug-ins
-
i dont know where to look