I'm trying to import RAW images from my new Fugifilm X-T1. iPhoto says the files are "unrecognizable".Any ideas?

I'm trying to import RAW images into iPhoto from my Fugifilm X-T1 camera. I get a message saying the "file cannot be recognized". Any ideas ?

Not necessarily.  Some  "glitches" were experienced by a significant number of users but not all of us, like the WiFi problem.  Those that experienced these issues did have a miserable time of it trying to get things right.  Personally I had no issues.  I did, however, boot into the Recovery volume after installing Yosemite and after each update to repair disk permissions and the disk.  There were a lot of permissions repaired each time.
Remember millions have upgraded to Yosemite and the number of those having problems is probably a very, very small percentage of them.  That doesn't negate the problems they're having but sometimes overshadows the large percentage of those not having problems.  
If you plan on upgrading to Yosemite do not run any "cleaning" or "optimizing" applications on your Mac or have any anti virus software installed.  Neither are necessary and are know to do more harm that good.

Similar Messages

  • How do I import RAW images from Sony NEX 5-R to iPhoto?

    I have Mountain Lion 10.8.2 and iPhoto 9.4.2 and have installed Digital Camera RAW compatability update 4.01 but still can't import RAW images from my new Sony NEX 5-R digital camera.. any ideas? I also have Photoshop CS6 - should I import through that if iPhoto isn't a feasible option..?

    This is the list of currently supported cameras
    http://support.apple.com/kb/HT5371?viewlocale=en_US&locale=en_US
    The Nex5-R is not on the List and so that Raw format is not supported at this time.
    Note: The Raw from every model of camera is different. Note: that's every model not every brand. So, the NEF produced by a Nikon D40 is not the same as the NEF produced by a D60, the CR2 produced by a Canon 350 is not the same as the CR2 produced by a Canon 400.
    Therefore the Raw for every camera model needs to be added individually. If yours is not supported then let them know you want it:
    iPhoto menu -> Provide iPhoto Feedback

  • I am trying to import developed images from LightRoom 5 in o Photoshop 6.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

    I am trying to import developed images from LightRoom 5 Photoshop 6 for further editing.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, or you do not have necessary access permissions or another program is using the file.  Use the 'Properties' command in the Windows Explorer to unlock the file. How do I fix this?  I would greatly appreciate it if you would respond with terms and procedures that a computer ignorant user, such as me, will understand.   Thanks.

    Have you tried restoring the Preferences yet?

  • I am trying to import developed images from LightRoom 5 into Photoshop 6.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

    I am trying to import developed images from LightRoom 5 into Photoshop 6.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another program is using the file.  Use the 'properties' command in the Windows Explorer to unlock the file'.  This has not happened before.  How do I change this?

    Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
    Mylenium

  • Importing RAW images from Canon 450D SLR

    I run iPhoto 6 and I have recently updated my digital SLR from a Canon 300D to a 450D. I was able to import CRW Raw files from the 300D but iPhoto will not import Raw images from the 450D (jpegs are ok), which are now coded CR2 instead of CRW. I note that there is a Raw image software update, available but this is only for iPhoto 8. Short of updating to iPhoto 8 is there another solution?

    I was afraid that might be the answer, but many thanks for pointing me in the right direction.
    Regards
    J

  • Why can't I import raw images from camera to lightroom 5.7.1?

    why can't I import raw images from camera to lightroom 5.7.1?

    You can visit the Lightroom Journal to see the new features of LR6/CC, including new cameras supported in this release:
    Lightroom Journal | Tips and advice straight from the Lightroom team.
    And yes, as DJ confirmed, the Nikon D7200 is listed.
    The the full list of supported cameras is here (Lightroom and Camera Raw have compatible engines and identical support):
    Camera Raw plug-in | Supported cameras
    Mike

  • Why won't RAW images from my new Powershot SX50 import in LR3?

    Why won't RAW images from my new Powershot SX50 import in LR3?

    hello,
    minimum lightroom version required:4.3
    camera raw minimum required:7.3
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

  • I cannot import RAW images from my Nikon Df.

    Hello,
    I have a late '11 Macbook Pro that currently has OSX 10.7.5 and iPhoto version 9.2.1  and for some reason I cannot import RAW images from my Nikon Df memory card. 
    I don't know if I have something wrong in my settings or if my current iPhoto and/or OSX needs to be upgraded.  Is there anyone here that would be so kind to help this technically challenged old man and tell me what I need to do?
    Many thanks!

    You'll need OS 10.9 Mavericks and Camera Raw update 5.0.2 and Aperture version 3.4.5 or later, or iPhoto version 9.4.3 or later, is required to install this update.
    The good news is that all those updates are free as you have 10.7.
    As always, back up all data before upgrading anything.

  • My cs4 won't open raw image from my Canon 5D II.  What is the solution?

    My CS4 opens raw images from my 40D with no problem.  However, when I try to open raw images from my new 5D II, it says it is "not the right kind of document".  Why is this?  Aren't all RAW images the same?  What is the difference between the RAW image in my 40D, and my 5D II?  Is there a solution to this?

    Please repost this in the Photoshop forum. This forum is for suite specific issues only.
    Bob

  • I have Adobe Elements10. The RAW images from my new Canon G16 camera will not open. Do I need an upgrade?

    I have Adobe Elements10. The RAW images from my new Canon G16 camera will not open. Do I need an upgrade?

    carolweiler wrote:
    I have Adobe Elements10. The RAW images from my new Canon G16 camera will not open. Do I need an upgrade?
    See:
    Camera Raw plug-in | Supported cameras
    You need the 8.2 version of the ACR module, and PS10 is too old to be updated.
    So, you can choose between 3 solutions:
    - update PSE to PSE12
    - use the Canon software to convert the raw files to the tiff format which PSE10 can handle
    - download and install the free Adobe DNGconverter which is able to convert a whole folder of CR2 raw files to the Adobe DNG raw format which PSE10 can handle.
    The last two solutions are free.

  • When i try to import my pictures from my camera i get an error saying unreadable files. What do i do to import them?

    When i try to import my pictures from my camera i get an error saying unreadable files. What do i do to import them?

    First launch Image Capture, located in the Applications folder, and see if you can upload the phiotos to a folder on the Desktop.  If you can then import the folder into iPhoto.
    Then reformat the memory card using the camera's format option, take a few test photos and try importing into iPhoto again.
    OT

  • I have a family video DVD that was originally on tape, but is now on disc. I want to import it onto my MacBook to edit and store. However the files are IFO, BUP and VOB and the Mac is saying 'unable to import' as it doesn't recognise the file. Help !!

    I have a family video DVD that was originally on tape, but is now on disc. I want to import it onto my MacBook to edit and store. However the files are IFO, BUP and VOB and the Mac is saying 'unable to import' as it doesn't recognise the file. Help please !!!!!

    Those are the constituent parts of a standard mpeg2 DVD. Storing them is easy: just copy the folder to your hard drive and they will play in DVD player or VLC.
    But that format is not intended for editing. To do so:
    You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    which is free, but you must also have the  Apple mpeg2 plugin :
    http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
    (unless you are running Lion in which case see below))
    which is a mere $20.
    Another possibility is to use DVDxDV:
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
    which costs $25.
    For the benefit of others who may read this thread:
    Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
    And from the TOU of these forums:
    Keep within the Law
    No material may be submitted that is intended to promote or commit an illegal act.
    Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
    If you are running Lion:
    From the MPEG Streamclip homepage
    The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion onwards, however MPEG Streamclip still needs it. See this:
    http://support.apple.com/kb/HT3381
    To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
    The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

  • HT201304 I am trying to use an iTunes card and I keep getting an error and the numbers 5301. Any idea what can be wrong?

    I am trying to use an iTunes card and I keep getting an error and the numbers 5301. Any idea what can be wrong?

    AIrPlay to Apple TV before you attempt Mirroring
    AirPlay Mirroring
    http://support.apple.com/kb/HT5209
    Trouble shooting AirPlay
    http://support.apple.com/kb/TS4215

  • I just downloaded the new itunes update, now I can't copying TV shows purchased from the library to my backup computer, it says the files are invisible. Never had any problem doing it until the update.

    I just downloaded the new itunes update, now I can't copying TV shows purchased from the library to my backup computer, it says the files are invisible. Never had any problem doing it until the update. I have a Mac Pro G5 OS 10.6.8. The desktop hidden files app doesn't reveal the TV shows.

    found a solution in a different discussion.. thank god.

  • Import raw images from canon eos 1000d to aperture 3

    Raw images from Canon EOS 1000D appear garbled tried using  all (?) import methods without success. Camera on firmware version 1.0.7
    HELP!
    Geoff

    Running Aperture Trial 3.1.2  all updates completed.
    May have solved one problem & got another!
    I can now import RAW images by selecting 'Raw' rather than 'Raw + L' on camera menu.This leaves me with all large files - potential future storage problem.  Looking into this.
    Thanks for reply though
    Geoff

Maybe you are looking for

  • How I can check in formula field does Source table has rows count more than zero?

    I have 2 tables in data set source: tbl_Quote and tbl_Invoice. Report should show an Invoice Number. If an invoice isn't issued yet I want display an Order Number instead of Invoice Number. I'm using a formula field for this purpose. I tried formulas

  • Labview 8.2 Read Binary File, no pos offset option anymore?!

    I have a VI that worked perfectly well in 7.1 and now I've opened it in 8.2 it doesn't work and I can't revert back to 7.1 because I accidently pressed save. In 7.1 I used the combination of open, read and close file functions to read parts of a larg

  • Create view problem

    dear all, i am using 816 dB on sun platform. a schema is exported from a US7ASCII dB and imported to a UTF8 dB. the data, index, constraints etc are imported successfully. however, error msg prompted when creating view, ORA-03113: end-of-file on comm

  • TemporalProxyElement does not dispatch new Duration

    Hi Following my last discussion, where I asked help to add a temporal trait to a ImageElement, and get it by wrapping it to a TemporalProxyElement I discovered that although it works great , but, does not dispatch a change Duration event. I made a cu

  • How to make a picture realy big, for using on a truck, without losing quality

    picture size is: 939 x 1000 px 300 dpi when i want to make it bigger so i can put this picutre on the side of a truck, but now it wil lose quality. how to fix this ?