I'm trying to print some pictures in iPhoto but a error message apears in the screen saying that there is no theme installed and I need to have some theme installed. I don't know how to do that. Need help.
I'm trying to print some pictures in iPhoto but a error message apears in the screen saying that there is no theme installed and I need to have some theme installed. I don't know how to do that. Need help.
Reinstall iPhoto.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.
Similar Messages
-
I am trying to update an app, but its asking to connect to a wifi or downlown it in itunes. There are several apps that need updating, I can't do either or, or maybe I just don't know how to do it.It's saying that the app is over 50MB. But it's not telling me which app. Help!!!!!!!!!
Well, I just purchased Linksys wifi and hooked it up. It's running fine. When I go to my IPhone settings to see is I'm connected to a wifi, it shows that I am not connected. When I hit my wifi to see or to connect, it takes me to the wifi networks and it's showing my secured wifi as being locked and my guess wifi as not locked. How do I sign in to my own wifi network.
-
This problem only started when I upgraded to FF 4.0. I am running Windows 7. When I go to the task manager I am able to see the error message in the processes area, if I highlight it and tell the task manager to stop it, FF immediately starts and runs normally. I have no idea where the error message is coming from.
This problem only started when I upgraded to FF 4.0. I am running Windows 7. When I go to the task manager I am able to see the error message in the processes area, if I highlight it and tell the task manager to stop it, FF immediately starts and runs normally. I have no idea where the error message is coming from.
-
I'm trying to update Firefox on my Macbook Pro, and it says I don't have sufficient priviledges, and I don't know how to fix that!
Doc Tzee wrote:
I'm in the Admin account! What's MBP? I'm pretty new to Mac.
MBP = MacBookPro
Are there other accounts? Is it possible Firefox was installed on one of them?
Have you run Repair Permissions? -
when I am opening photoshop elements 10 I see my desktop picture into photoshop elements 1- and I don't know how to avoid that. Does anybody know I can get rid of that picture, so that I only see the workspace of Elements?
Thanks a lotWhat I said--go to the Window menu and turn on the application frame.
-
I have iphone 4 . I don't know how that happenned that the normal color on screen and all icons changed ( for example , normally green color phone icon became purple color ,) and photo pictures turned negative appearance ( ghost-like ) . Any idea how to fix this mishap ? Your help will be appreciated.
Hi kshieh
You can try two possible steps:-
1]Triple click the home button. You should get an accessibility menu.deselect the negative/black and white option.
2]Go to settings->General->accessibility->and deselect invert colours.
That should fix it
Rithwik -
My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
I would like to know how to draw up a list in a cell (like a pull-down menu) to ease data capture, but I don't know how to do that !
Do you get the idea ?
Thanks ever so much !the numbers manual can be downlaoded from this website under the Apple support area...
http://support.apple.com/manuals/#numbers
What your looking for is written out step by step for drop downs and all other special types of user input starting around page 96 in the '09 manual.
Jason -
in Iphoto i dragged a group of photos into a folder on the desktop, they went in as thumbnails and i don't know how i did that. can anyone help me do that again
Don't you mean Photos or are you still using iPhoto with 10.10.3?
Normally one gets the preview version of a photo or the edited version if it's been edited when dragging from a thumbnail to the Desktop. Don't know how you would have gotten small thumbnail versions. -
Probably astupid question but I am new to Mac's. Somehow my picture is gotten placed at the top right of all my out going mail and I don't know how to delete it. Help!!
This may help:
http://www.maclife.com/article/how_can_i_remove_my_photo_from_messages_in_apple_ mail -
I wrote 6 pages in a document. I wanted to put page 4 before page 3 and could not move them. They had a box around 5 pages and I don't know how I did that, nor do I know how to undo that.
terrymanga wrote:
Guess that's not the solution.
And you guessed wrongly.
On my side, I guess that before opening the menu, you clicked somewhere out of the pages (in the thumbnails areas for instance).
Re try after cliking at the bottom of a page.
The feature is really described in Pages User Guide.
Yvan KOENIG (VALLAURIS, France) mardi 27 septembre 2011 22:51:27
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community -
I have iphone 4 with virgin mobile canada, virgin provided me SIM unlock code online, but i don't know how to use that code to unlock my phone. Can anyone help me in this?
That's not how unlocking an iPhone works.
The carrier the phone is locked to submits a request to Apple, wh updates their database. When that is complete, you restore the phone with iTunes to process the unlock. -
hii i need help i cannot use my apple id for download on app store because they say i need to verify my account but i don't know how so please somebody can help me? i try to resset my password but that don't help
is it asking for ur security questions?
-
I cannot get my Windows live hotmail acct. to access my email. Windows support suggests I optimize my browzer, but don't know how to do that. I never had a problem before and have always used Mozilla Firefox as my browser. The Firefox4 also looks different since I changed it. No Google bar in the center, or the Mozilla logo.
You can do a test if it works in Private Browsing mode. In PB mode the disk cache isn't used and also the currently saved cookies are not available.
You can enter Private Browsing mode if you select:
* Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
*Check-mark: [X] "Permanent Private Browsing mode"
Close the Options window and open the Hotmail log in page.
You can remove the check-mark ([ ] "Permanent Private Browsing mode") to leave PB mode.
If that works the it is possible that there is problem with the file cookies.sqlite that stores the cookies in the Firefox Profile Folder.
You can rename (or delete) <b>cookies.sqlite</b> (cookies.sqlite.old) and delete <b>cookies.sqlite-journal</b> and <b>cookies.txt</b>, if they exist, in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case the file cookies.sqlite got corrupted.
* http://kb.mozillazine.org/Cookies#Removing_cookies -
My ipad displays in negative mode. I don't know how I did that or how to change it back to normal
my ipad displays in negative mode. I don't know how I did that or how to change it back to normal
Most of us cheat: http://support.apple.com/manuals/
Maybe you are looking for
-
Okay - I've gone through posts here ad infinitum until I'm thoroughly confused! Without any reference to codecs, muxed audio or deinterlacing, can someone give me a simple workflow to take 1080i AVCHD footage from my camera, edit it, then burn the re
-
Help me with Screen shots of LSMW
Dear All Please send me the Screen shots of LSMW for step by step process Thanking you Regards karthikeyan
-
I have a data grid populated by an XMLList from an XML file. Currently, it displays data from the entire file. However, there is a node for each item in the list indicating a category, e.g. "Fruits", Vegetables" I want to have a toggle button bar wit
-
Upgraded to Leopard, now fonts on clip ids in browser window unreadable
Running FCE 2.0.2. Program works fine, I just can't read the titles of my clips in the bin in the browser window anymore. They're there, just kind of tiny and bold and mush. Is there a way to reset the display font in the bin/browser window? Ideas???
-
My frend has a kodac easyshare camera, and im wondering if we can use it to video chat.....please can anyone help or give me a link to that page that tells which cameras iChat AV suports? thanks NEways powermac G4 Mac OS X (10.4.2)