I'm using a Mac OS X (10.9.2) Mtn. Lion (converted to Mavericks) and use Safari for Gmail, my long time email program. Lately I almost cannot use Gmail at all. "Missing Files", "Errors", etc, etc, and can only use it in Basic HTML. HELP!

I have no idea if the problem is with Safari or with the Gmail files. I get the msg. "Error' over and over and often "you may have entered the address wrong" (when I KNOW I HAVE NOT) and other msgs. which I do not remember at this time. I'm having to use ''Basic HTML" and that seems to be OK - tho it is insufficient. The "Mail" app in OS X works fine but I cannot tolerate the format and must solve this dilemma. Any suggestions? I've read the "related issues" section and have not found anything closely related to this issue and would appreciate any suggestions.
Thanks tons.
Sam Sayger
Hernando, MS

Similar Messages

11.5.9 to 11.5.10 upgrade missing file error - adrelink exiting status 1

I am in the processing of upgrading our system from 11.5.9 to 11.5.10.2 on a Linux 4.5 system.
While applying patches 4337683 I ran into missing files which required me to apply patches 2214446 and 2284692. After going through the steps on both of those patches I am still getting a missing file error when it tries to relink ENCACN.
I am getting the following error:
$APPL_TOP/sht/11.5.0/lib/rwave/libstd8s.a: No such file or directory
I have searched for anything referencing this particular file and can find nothing on the web. I also noticed that I have no rwave directory and I have also searched the whole partition and that file does not exist. I must be missing another patch that I can not find.
Can someone point me to the missing patch?
Thanks
Tim
Edited by: user12055581 on Nov 5, 2009 12:45 PM

Thanks for your help, that document worked great.
I have since experienced another issue now that is resolved. This issue is almost identical to an issue I started with originally.
When relinking ENCACN
a couple messages about "more undefined refereces to '__pure_virtual' follow'
/usr/lib/gcc-lib/i386-redhat-linux/3.2.3/libgcc_.so: undefined reference to 'dl_iterate_phdr@GLIBC_2.2.4'
I had originally gotten an error about GLIBC_2.2.4 that was corrected by
mv gcc gcc344
mv g++ g++344
ln -s gcc32 gcc
ln -s g++32 g++
in /usr/bin
My searches on this error seem to point to the same solution to fix this but it has been done. Is it perhaps a version problem the gcc344 and gcc32 were what I pulled from the website, are those based off of versions installed so they should be something different for my system?
Thanks again for the help
Edited by: user12055581 on Nov 6, 2009 12:14 PM

Thumbnails appear but missing file error message if try to open

PSE worked fine for 2 months, when downloading to Shutterfly organizer crashed. uninstalled and reinstalled-problem persisted. Set up new user/administrator and organizer would open but with "missing file error message" if tried to open thumbnail picture. Then unistalled pse8 and reinstalled pse6. Still get missing file error, but again I can see the thumbnails. I had at one point 5000 photo's and deleted 3000 to reduce clutter using the delete from harddrive option when I did so. Now I once again have 5000 photo's cataloged ?? At this point I would be happy to simply get pse6 working as it should, any suggestions please. I have a lot of time and knowledge invested in PSE and I hate to cop out to Picassa at this point ?

I'm slowly getting this mess untangled. It seems that on the reinstalls of pse8 following organizer crash that even photo's that were previously deleted from both catalogs AND harddrive must still keep a thumbnail version hidden in some file somewhere. when I used the delete option in the missing file dialog I was able to remove them from the current catalog. It seems as though after too many software upgrades and photo's copied and saved through the years, you might as well by a new computer and mke a fresh start. But then again I'd just have to deal with windows7 and pse8 compatibility issues anyway. D@&D if I do, D@&D if I don't scenario !!

Finding all missing files - not just music

My library had 39 missing files, the problem is I can only find 2 exclamation marks for 2 audiobooks I already knew had a problem. I've seen the new playlist trick for locating missing files (for example), but I don't think that will help me as I don't think the other 37 are in the music section - I can't find any exclamation marks anywhere in my 3000 songs. I did think that it might be related to podcasts, but again, I can't find any exclamations. Is there anyway of determining which files are the broken ones?

In the Inspector/Page pane under Background change the menu to Image File:
You will be asked to locate and select the file. You may have to play with the options, tile, stretch, fill to see which is the one to be used.

Using Suri asking any localised question in the UK, it responds with 'cannot help' can only use US locations etc. and in US English. Have I missed something or set something up incorrectly? I also thought it would interface with your Facebook but it just

Using Suri asking any localised question in the UK, it responds with 'cannot help' can only use US locations etc. and in US English. Have I missed something or set something up incorrectly? I also thought it would interface with your Facebook but it just comes back with a 'I can't help you with Facebook' message

Yeah, Siri - a headline feature on the iPhone 4s page - is beta at the mo.
But then anyone who's used Macs for a few years will know that most new software is pretty much still in beta when it's released anyway. Only Apple could get away with it and retain customers

Warning: All config files need conf:/etc/modprobe/sound

when I boot I get about 20 of these messages which slows my booting way down.
"Warning: All config files need conf:/etc/modprobe/sound,it will be ignored in future releases"
What can I do do make it go away?

You can search the forums and read the news on the frontpage before upgrading - Wonder linked you to the specific message.
This has been covered over and over.

When i plug in my charger to my macbook and have it charged all the way i can only use it for an hour before it dies on me again. what is wrong with my macbook? what can i do to fix it?

when i plug in my charger to my macbook and have it charged all the way i can only use it for an hour before it dies on me again. what is wrong with my macbook? what can i do to fix it?

Go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report in 10.7), then select Power from the left hand column of the System Profiler. Copy and paste the Battery Information back here.
Also it would help to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report in 10.7).When System Profiler comes up check the Model Identifier.

Captivate 6 Errors: Missing file libwinpthread-1.dll and The Application was unable to start correctly (0xc000007b) on Windows 2008 R2

Hi,
I have a problem with Captivate 6 installation on Windows Server 2008 R2. I have 2 different scenarios where I tested but the result is same.
1- I used AMEE (Application Manager Enterprise 3.1) to create the installation Package to deploy through SCCM 2012.
Notice that the current package works fine on Windows7 (x86 & x64) but not on 2008 R2 due to an error after I try to launch Captivate.exe application.
The error states that there's a Missing file: libwinpthread-1.dll and if I copy and made a registration of this .DLL file then it sends another error saying: The Application was unable to start correctly (0xc000007b) so it never let me launch the application.
2- Now if I install the package directly from the Original sources(CD) without creating any AMEE package after completing the installation I still have the same error about the DLL missing file.
Is there any fix or workaround to install Captivate 6 on Win2008 R2 ?
Thanks in advance & kind regards.

Wow, No replies so far !!
Any one ??

HT1498 After entering my password a message comes up that says I can only use this account in th US and returns to sign in screen. I am I the uS . Am I missing something?

After entering my password a message says I can only use account in US. Then returns me to sign in page. How do I rent a movie?

After a great deal of searching I ran across the suggestion to disable all plug-ins and then, one by one, enable them until finally the problem was solved. I am not sure which plug-in was causing the problem, as I am satisfied to have the problem solved. I am going to leave the rest of the plug-in disabled.

I have my photoshop cc installed on my Mac and my windows laptop is it true that I can only use one or the other now? and if this is the case if my mac were turned off should my laptop now work? I am on the photoshop photography program

i have my photoshop cc installed on my Mac and my windows laptop is it true that I can only use one or the other now? and if this is the case if my mac were turned off should my laptop now work? I am on the photoshop photography program its just that i have never noticed tho before i have my mac turned on and the laptop PS works fine on the Mac but not on the Laptop

Hello,
see >>> http://helpx.adobe.com/creative-cloud/help/install-apps.html here >>> How many computers can I install on
I quote: You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each.
If you install on a third computer, it will request you to de-activate on the other two computers. You can then reactivate one of the previous two computers, and use Creative Cloud apps on it.
Good luck!
Hans-Günter

Why missing file error?

I made the mistake of updating to 10.1 and now I am regretting it.
I have a project with files from another library and I get the missing file (red box) error. I try re-linking, but apparently, you cannot re-link to files that are in a library, I don't get that.
If I drag a clip from a library to a poject in a different library, the video shows up. But, as soon as I grab it and move it on the timeline, I get the Missing File error again.
Very frustraing.
Surely you should be able to share clips between libraries? I set up a library of Shared clips that I use frequently in projects across my other libraries.
Any help would be appreciated.

On Friday I did a new spreadsheet based on a previous spreadsheet to do some serious work. I saved it. I am using 2.3.
index.xml files missing
I have two iterations of Numbers showing under Recent Items. Both of them show 2.3.
I navigated to Applictions/Numbers. That shows as 3.5. I opened from the Applications folder from my hard disk and the needed file opened.
I did a search by name for Numbers/Applications and found three. One was the 3.5 I wanted to use, two were in iWork folders, one in my main disk Applications, the outer in a backup of Applications. I was able to throw away the backup Number, the but one on the hard disk could not be thrown away because it said it was still open. Only the 3.5 version was open. I quit 3.5 and was able to throw away the duplicate 2.3.
I keep previous iWorks/Pages because the new version is a crippled version that does not offer the features and commands on which I came to depend. I am abandoning Apple for my word processing and document creation needs. The newest version is a serious downgrade from the previous Pages functionality. Scrivener requires a learning curve, but has proven to take up the slack of reliability that Apply has dropped.
I will shift all my spreadsheet work to an open source spreadsheet, Numbers has joined Pages in needless lost time in functionality and the simple ability to open the right program for the document created by that program.
Too bad. I despise Microsoft and depended on Apple from 1985 up. I have two Linux boxes in the house and use my Mac primarily for work with previously purchased Adobe programs. When those stop functioning, the iMac will also join my Linux workforce.

I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini. don't need the caps/lock or ctrl key and due to an injury my daughter can only use her left hand to type. She is using a text to speech app to verbaliz

I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini. I don't need the caps/lock or ctrl key. Due to a brain injury my daughter can only use her left hand to type. She also uses a text to speech app to verbalize all of her needs since her speech isn't intelligible any longer either. And her vision was significantly affected also, so the keyboard has to be mounted about 6 inches from her face. So to reach across the keyboard with her left hand to the right side delete and enter button is physically difficult and causes typing errors, which cause people to not understand what shes trying to say.
The best keyboard so far is the Zagg folio mini. I just had to make stickers to enlarge the letters on the key buttons.
Does anyone know how I can reprogram these two keys? Or where I can buy a wireless mini keyboard for Ipad made for lefthanders with these two functions on the left side. I have searched for days and days. It's sooooo important to me that she be able to contribute her voice again. Imagine if you got in a car accident and couldn't speak clearly any longer, but understood everything still. Thanks for any help and suggestions you all take the time to share with me. I really appreciate the kindness of strangers to help me help my daughter.
Sami's mom

Sami\'s mom wrote:
I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini.
You cannot.

How do I get a list of all missing files in a catalog in LR2?

Is there an easy way to get a list of all missing files for the thumbnails in Lr2? I know the symbol that appears in the upper right corner of any particular photo that is missing its file, but how can I get a list of all such photos for an entire catalog (or at least big chunks of a catalog).
Thanks.

You can right click a folder and choose Synchronise - it has a Show Missing Files buttom.
John

How do I get list of 'ALL' Missing files?

How do I get a list of all missing files? I occasionally get a message that a certain file can't be found. I know where they all are - on another drive.
I don't want to just try to add all of the files onto the prime loactaion because It's likely that I will get a huge file of duplicate. From past experience the duplicate feature in this programs is very poor. I should mention that all files are from on own CD's & are without DRM.
If I get the complete list I can easily just copy missing files to main drive.
Thanks in advance

You can right click a folder and choose Synchronise - it has a Show Missing Files buttom.
John

Why am I recently unable to use my mouse to scroll email topics or content? I can only use the up and down arrows keys to scroll.

Why am I recently unable to use my mouse to scroll email topics or content? I can only use the up and down arrows keys to scroll. I am able to use my mouse to scroll through internet searches. It only seems to have affected my email messages.

Try a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode - Mavericks
Safe Mode - About

I'm using a Mac OS X (10.9.2) Mtn. Lion (converted to Mavericks) and use Safari for Gmail, my long time email program. Lately I almost cannot use Gmail at all. "Missing Files", "Errors", etc, etc, and can only use it in Basic HTML. HELP!

Similar Messages

Maybe you are looking for