I'm using an eMac power cord on an iMac G5 and the screen is a blue tinted color. No true colors are displayed.
I just realized I was using an eMac powercord on my G5 iMac.
Make a difference at all? Does it screw up my computer?
I have a weird screen problem anything to do with this?
I can't see how that would make a difference. But use the proper power cord for the iMac, if you have it.
To see if this is software or settings related, if you have a way to boot from a different system, such as a Mac OS X installation disk, start up from that other system and see if you still have the "blue tinted color."
If the problem recurs, you should do these two procedures to Reset PRAM and Reset SMU, to see if there is any improvement
http://support.apple.com/kb/ht1379
http://support.apple.com/kb/ht1767
When you do the Reset SMU procedure, if you have been connecting the power cord to an old or over-crowded power strip (surge suppressor), try connecting it to a wall outlet by itself, to see if that makes any difference.
If that does not help, there may be a hardware-related problem.
Similar Messages
-
I used Cmd +Q to close a programme and the screen went blank and even tho the power cord is attached the macbook is not powering up any ideas
Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
Best. -
I recently got an extension cord for my ipad charger and the first time I used it it worked and now when I plug it in to my ipad It doesn't do anything. What do I do?
I think that we all understood what you meant. If the extension cord is no longer working, then return it.
We are all trying to tell you that you can plug the power block into a standard household extension cord - using the short cord that came with the iPad - and there is no need for the extension cord that you bought.
Edit - one upped by the lovely lady with the pretty kitty avatar -
Anyone know where I can buy the power cord for intel imac
i lost the power wire to my imac and i don't know where to buy it
anyone know where can I get it and how much it costs?Newer iMacs use ordinary computer power cords commonly used on all sorts of electronic equipment.
The power cord used on G5 iMacs (I think) is different but is also readily available. Either one will cost you less than $10. -
When using my iMac the screen turned blue and so I turned the compute off. When I turn on again power does get to the computer but there are no chimes and the screen remains black. Any advise please. David
Hello DJJOC,
Thanks for using Apple Support Communities.
To start troubleshooting this issue where your iMac's screen will not illuminate, please reset your SMC by following the information outlined below.
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Note: For Intel-based Xserve computers that are not responding, you can shut down locally, or by using remote commands, or by pressing and holding the power button for five seconds.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Take care,
Alex H. -
everytime i go to plug my ipod 5 in with the charger in to the mac desktop computer a message says "USB DEVICE DISABLED" "unplug the device using to much power to re-enable usb devices" and ever since i had got that message my charger had stopped working even plug into a wall outlet
ps.its my only charger and i need to know if i can fix this problem or my mac broke my chargerHey HoustonSmith, using to much power generally means a short. Do not use this cable, the lighting cables have a history of failure; shorting out. If within one year of purchase date take it to Apple, the cable also has a one year warranty, if short is do to manufacturing flaw and not abuse Apple will replace it free! Otherwise a new cable is around $30. You could also try a reset or restore, but don't think a glitch is your problem. If you do try to restore, just remember to make backup copies of all the info / data on this iPod to your computer first, then attempt to restore. Good luck. Cheers.
-
When I first plug in my power cord it lights up green and then after a few seconds changes to red. What does this mean and how do I fix it?
Apple systems in MBP have self-maintaining charging systems. If the battery is less than 95%, the charger light turns orange when plugged it. It will charge to 100% and stay green then will hold on charging until the battery drops to 95% again.
-
My Macbook Pro 17" 2.44ghz all of a sudden one day decided to not boot up. When the power button is pressed the sleep light in the front on the latch release turns on and there is a small running sound but it never boots up and the screen never lights up. Anyone else have this problem? Any ideas?
I'd love to repair it but not if it'll cost 500 bucks or more to replace the logicboard.
I appreciate any help
MichaelLao Bo,
yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
find / -iname filename -print
This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
find /Users/username -iname filename -print
Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
cp -p filename_returned_by_find /Volumes/USB_volume
If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
ls /Volumes
Please let me know if you have any trouble with these commands. -
I was in the middle of using my iPhone 4 running on the latest iOS before iOS 6 and the screen went black but you can see it is still on because the color of the screen is blueish blackish like when your phone is turning off. Any suggestions?
Reset the device by pressing and holding the home and power buttons for 15-20 seconds until the white Apple logo appears.
-
My photosmart c4280 has an error and the screen says to turn power off and then on again.
my photosmart c4280 has an error and the screen says to turn power off and then on again
Please try temporary connecting your printer to some other power socket, without using any power extention or hub.
If the same issue persists, contact the local HP Support center, as it seems like and hardware or Power Supply problem.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
My friend's ipad dropped and the screen cracked and he wants to use the warrranty. So does the warranties for apple cover this
AppleCare+ provides repair or replacement coverage, both parts and labor, from Apple-authorized technicians. Service coverage includes the following:
Your iPad
Battery1
Time Capsule or AirPort device4
Included USB cable and power adapter
Coverage for up to two incidents of accidental damage from handling of your iPad, each subject to a $49 service fee1
http://www.apple.com/support/products/ipad.html -
whilst downloading the update to my ipad a screen is up ..the power plug a small arrow above and the itunes logo above that.. it has been there for at least 2 hours... why?? ..or what to do??
wellllll.... it was fixed in 15-20 min at the store.... using the same method you suggested ...go figure.... perhaps my wi-fi was a bit wobbly.... who knows.... most of the info was restored through the cloud... lost my pics, but thats not crucial......they are all elswhere... so your tip was spot on, and i appreciate you help.... thanks again !!
-
My macbook pro won't power up or charge after i cleaned the screen and keyboard with a damp cloth
Do not try to use it. Make an appointment at an Apple store genius bar and have the technicians evaluate it for FREE.
Ciao. -
I dropped my 17" macbook pro and the screen is broken. Can I still use it with an external monitor? When I plugged it into a monitor I had used it with before, I'm not able to see anything on the macbook screen to control it. It came on but I just got the blue screen with nothing else after typing in my password. (Didn't see the password form just assumed it was there somewhere and it did go from space to blue screen but no desktop icons, files, dock strip at top or anything else, just blank blue screen) so I can't access the system preferences.
Or can I / or how do I, transfer hard drive files to my mac mini? If not salvageable as is can I pull out the hard drive and make it an external harddrive? In otherwords is anything salvageable? It seems it's coming on I just can't access anything. BTW I was told it would cost aprox $1000 to replace the screen! I paid almost $4000 for this thing and it was running great - makes me sick to lose it!I'd like to promise you that everything will be fine if you just get the monitor going - but it's hard to know what the hardware damage might be. It might be the monitor, or the damage might be greater.
Your best solution would be visit your local Apple Store and let them know what your situation is. They have access to diagnostics you don't, and they might be able to the best way to save your data and keep you computing. It's still not covered, but they can tell you what your current options are.
Um, you might consider investing in a backup drive.
And there other repair options, too. Powerbook Medic http://www.powerbookmedic.com/xcart1/pages.php?pageid=67 offers reliable repairs, and quotes prices well under Apple's. -
We just moved from the United States to Costa Rica. The first two days my mac worked great. Then all of a sudden I was trying to use a game application and the screen went black and there is a white cursor which I can move around, but I can't escape it. When I restart it seems okay and I see my main screen, but only for a second and then it goes black again.
This computer was brand new in June. Is it the humidity??? What can I do. Please help!!!!No guarantess but try smc and pram resets,
Maybe you are looking for
-
ITunes Match constantly forces iTunes to quit.
I posted this a few days ago and have searched the forums and the web for a solution, but haven't found one yet. How can I determine what is causing the crash? Many thanks in advance. Process: iTunes [933] Path: /Applications/iTune
-
CRM 2013 On-Premise How to implement sequential numbering for records?
Hi All, I don't know if someone could advise me on the following. I have two entities, Transport Routes and Stops with a 1:N relationship. I want to auto-number the Stops records sequentially (1, 2, 3, 4, etc.) but want to start at 1 within each Tra
-
Can't Install iTunes. "Missing Quicktime.msi"
Hi guys. When I try to intall iTunes its says something like this "Can't read the file: C:\WINDOWS\Installer\QuickTime.msi" Whats wrong?
-
Dear Gurus, what is field catalog in pricing? Thanks..
-
O9iAS Pentium 4 certification. When?
When OracleASHome102HTTPServer starts I get a Win2000 access exception c0000005 on java.exe. Little DrWatson window pops up... O9i logs Logs show nothing. Only drwatson shows problem info, assembler dump, ets... Anyone know what's wrong? I've got O9i