I'm using iPod touch 4 gen and after I updated into version 6.1.5 my camera can't be open. I already restart my iPod but it still can't be launched
the camera just reload and reload. I'm trying to use camera360 but it is same. It's black and if I touch the shutter it doesn't captured anything
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. You problem happens some timnes and is not related to iOS 6.1.5.
Apple Retail Store - Genius Bar
Similar Messages
-
IPod Touch 1st Gen and 3.1 update DELETES volume slider
I had a perfectly working iPod Touch 1st Gen/16GB until I updated to 3.1 software. Now I do not have a volume slider.
Yes headphones are in but there is no place to adjust the volume. There is previous, next arrows and play and pause AND its centered in the rectangular area, but no volume slider.
I have restored it 3x in various ways. I have tried 5 times to downgrade the operating system but ALWAYS get an error, so it never completes. Of course the ipsw files where found using google because there isn't any links that work on Apple's site for previous iPhone software. If I try to restore to 3.1 right after that it goes through perfectly.
So it seems that Apple has locked out downgrading once you upgrade! All I want is my volume slider back. How can I get it back if 3.1 deletes it everytime and I can't go back to the previous operating system?
Thank you.I too have had this exact same problem, except that I was running 3.0 and hadn't updated to 3.1. I put my ipod on the table overnight, after listening to it, and when I picked it up the next morning, theres no volume slider. I never even unplugged the headphones. Double clicking the home button while on the home screen would bring up the popup to skip songs, and there it says "Dock Connection" even though it not connected to a computer. Multiple reboots an no effect. I've tried different sets of headphones, to no effect. Its like the iPod isnt detecting them being plugged in. The worst part is i DO get sound in the headphones, but no volume control, and the sound level is turned really low. So the headphones ARE working.
I updated to 3.1 just now, and the problem has NOT been fixed. Theres no way anywhere in the settings to adjust the volume. Theres only a limit slider, so I have no way to turn up the volume loud enough to actually HEAR things. -
I have an iPod touch 4th generation and after sending emoji it no longer works. Every time I try to open iMessage it closes. I have already tried resetting and restarting my iPod and neither has worked.
Have you tried getting rid of emoji?
-
I try to use fototeca to iCloud (beta) in my ipod touch 5 gen and all my photos disappear, how can i get my photos back? ipod touch iOS 8.1.3 if you need something more tell me please
Firs go to fotoeca's support site
If they are not on the iPod or on iCloud then your only hope is:
- A data recovery company
How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official
http://www.amacsoft.com/ipod-data-recovery.html
iPod recovery software to restore lost music files
http://www.pcrecoverytools.com/ipod-data-recovery.html
-iPod touch Deleted Photo Recovery Tips You Should Know -
I purchased a used Ipod touch 4th gen and my computer (Windows XP) recognizes it as a camera but Itunes will not recognize the ipod. Old ipod works and connects fine. Any suggestions?
Well, there is always the possibility that it's been jailbroke, in which case, you're out of luck. However...
http://support.apple.com/kb/TS1369
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
I have an ipod touch 4th gen and when I plug it into my computer it shows up but it wont on iTunes and I was trying to put more music on it today and it wasn't showing up can u help please and thank you.
Hey Babetta94,
Thanks for using Apple Support Communities.
After reviewing your post, the iPod is not recognized in iTunes. A frustrating situation to be sure. You haven't mentioned what OS the computer you are using uses. You can choose what article to use either OS X or Windows from this quoted section.
iPod not appearing in iTunes
http://support.apple.com/kb/TS3716
If you have an iPod touch:
For Windows: See iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
For Mac OS X: See iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Have a nice day,
Mario -
Can I do screen share with my iPod touch 4th gen and my iMac?
Hi,
Is it possible for me to use screen sharing with my iPod touch 4th gen and my iMac?You can control/use/view you Mac via the iPod. There are apps and program like GoToMyPC, TeamViewer.
Some do not do sound..
There is no way to control the iPod from a computer -
so i got the update on my ipod touch 5th gen and i got asked me for my old itunes acount and password so i can get the back up from icloud, except i no longer have that info for the back up and it wont let me by pass at all, i need a way to just restart it
You need to recovery and use it. Sounds like you are running into:
iCloud: Find My iPhone Activation Lock in iOS 7
Is there a way to find my Apple ID Name if I can't remember it?
Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information. -
Ipod touch 2nd gen and have ios 4.2.1. apps that will not download, higher ios version needed
I have an ipod touch 2nd gen and have ios 4.2.1. I recently tried to download some apps and received a message that said I need a higher ios version (like 4.3 or higher). I know there used to be apps that worked before but I deleted them. When I tried to re-download them again they say they won't work. Options?
Thanks
WestyImport the older versions to the iTunes library from your computer or a backup of it, or buy a newer device, or give up.
(72621) -
've lost my Ipod touch 5 Gen. and wanted to ask if there is any possibility to localise my ipod! I've got an Apple-ID, does that help?
lost/stolen
No app on the iPod is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
I have an ipod touch 4th gen and an ipad mini with same apple ID and I want to sync the songs
I have an ipod touch 4th gen and an ipad mini with same apple ID and I want to sync the songs
Just connect to computer and sync.
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method to more easily get different media on each device
Managing content manually on iPhone, iPad, and iPod -
How can i get my music off of my email to my iPod touch 2nd gen and iPod 4th gen?
How can i get my music off of my email to my iPod touch 2nd gen and iPod 4th gen?
Find an app to which you can save the attachment and which also uses file sharing
iOS: About File Sharing
or similar to get the music into your computer. Import into iTunes library and sync to the iPod. There is no direct way to get music into your iPod Music app besides purchasing from iTunes or syncing from your iTunes library
GoodReader should work but I do not think it is available for the 2G -
I have an ipod touch (4th gen) and just bought a clock/charger/player. It says I need ios 4.3. I keep getting a message saying I can download ios 6.? but that it will wipe everything off my ipod. Is there any way to get the ios without wiping out my files?
There is no supported method to "downgrade" iOS on any device. If you update, you will get the latest iOS for your device, which will be iOS 6.1.3. You cannot go backwards to iOS 4.3
If you have never backed up in either iCloud or iTunes, then upgrading to iOS 6.1.3 will involve restoring your device as part of the upgrade. Without a backup to restore from, you will loose everything that is on it.
You should first connect to iTunes with your computer, sync your device without upgrading and create an up to date backup of everything. Then use the upgrade option in iTunes to update your iOS.
However, if the dock device strictly requires iOS 4.3, it will not work, as you cannot downgrade iOS. There simply is no mechanism from Apple to do that. -
hey i broke the screen on my ipod touch 4th Gen and im trying to do a backup on the data but it says I need to enter a passcode on my ipod but the screen dosent work so what can I do.
You can't backup the iPod t iTunes then. You will have to use an existing iTunes backup.
If iCloud backup is turned on and the iPod is still working (not disabled), the iPod will automatically backup daily if an internet connection is available and the iPod is connected to a charging source. -
I have an ipod touch 4th gen, installed the latest update to iOS 6 and have lost all my music, apps etc. It also linked up with an alternate email address???? Help!
I have a similar issue happenning with my ipod touch 64GB running IOS 6.0.1. My music content is stored via itunes on my Snow Leopard macbook pro as well (and not in the cloud). The music on my ipod (which is sync'd to my macbook pro when I connect via usb) has randomly disappeared about 3 or 4 times lately, not during sync'ing and unrelated to battery charge levels. Fortunately I have been able to restore it by restarting my macbook pro then re-syncing the ipod, which it is now doing as I write, but it takes hours (for over 3000 songs). Having looked at a few other forum discussion pages, it seems this may be a bug related to IOS 6 updates and using music/itunes and podcast playing apps. The same thing has intermittently occurred with some other content such as downloaded podcasts, iplayer content and photos. Once I reconnected the ipod it synced and apparently restored the content, but I can't understand why it lost it in the first place, and its very annoying. Lets hope the reinstalling works on my ipod tonight....up to 248 of 3326 songs syncing as I write....
Maybe you are looking for
-
My i pod appears to be in a loop it just switches itself on and off
my i pod appears to be in a loop it just switches itself on and off anyone else had this problem if so whats the fix?? Ray
-
Need help urgently to share files
I can't find a toolbar to share my uploaded files. The one seen does not match the one in the tutorial. I need to get the files out right away. How can I get this accommplished?
-
Hi all, Does oracle b2b supports 'application/vnd.ms-excel' type of files to be send as an attachment to end TP? We are using SOA 11.1.1.3 version.
-
Need to add a Transaction in the SAP menu in the Given path
Hi All, I need to add a transaction in the enhancement menu in the specified path. Kindly share the method. Thanks in Advance! Chirag Shah
-
Clipping Mask with complex designs
I have a somewhat complex design/vector object that I can get to clipping mask over an image. When is does it masks in the wrong places and outside of the design that was made into a compound. Why can't I get the design to mask correctly?