I'm using Mac 10.8.5 - desktop. How large is the download for Ff 27.0 AND why is the download size no longer posted below the D/L icon?

Mac mini(2012) using 10.8.5, Ff 25.0.1. Isn't the question sufficient?

Sorry, can't answer as to "why".
46.4 MB from here - http://www.mozilla.org/en-US/firefox/all/

Similar Messages

Thinking about using Mac Mini's as desktops for 20 employee business. Pro's Vs. Con's

Thinking about using Mac Mini's as desktops for 20 employee business. Pro's Vs. Con's

Your best bet would be to buy a single 2012 MacMini Server model that you can use to manage the balance of the other machines. Either that or upgrade one of the MM's to OS X Yosemite Server . You can find information about the Server edition at:
https://www.apple.com/osx/server/
However I would STRONGLY recommend visiting your local Apple Store and ask to speak to their business specialist, they are trained to manage customer needs such as yours.
The major advantage of using Macs over any PC is the stability of OS X itself and the overall quality of support that you will never get with HP.

Can you use apple tv to play a movie on your tv (say for kids to watch) and use your mac book at the same time to browse the internet ???

Using a mac book pro !
Can you use apple tv to play a movie on your tv (say for kids to watch) and use your mac book at the same time to browse the internet ???

Good question bigboggerchoot. I also would like to know the answer to this.

Why will my Mac 8,1 intel desktop not stay in sleep mode for more than 5 seconds?

Why will my Mac 8,1 intel desktop not stay in sleep mode for more than 5 seconds?
Have tried repeatedly and end up shutting down instead of "sleeping:.

Hello, most usually it's some USB device causing that, but...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed. Or an errant process eating up RAM.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

I bought a macair book. I have no experience of using Mac. can anyone till me how to uninstall programs?

I bought a macair book. I have no experience of using Mac. can anyone till me how to uninstall programs?

By the way, be cautious about uninstalling any programs that Apple shipped with the computer, especially if you are new to the Mac.
For stuff you installed yourself, PlotinusVeritas' method works fine for many programs, but anything that came with an installer probably needs a more complicated uninstallation process. So do some programs that start off installation by drag-and-drop.

HT1444 I am using Mac os x 10.5.8 does this version allow for an upgrade to mountain Lion

I am currently using mac os x 10.5.8 Does this version allow for an upgrade to Mountain Lion?

Snow Leopard Purchase
If you are unsure exactly what year your Mac is, check the model number.
Model Numbers
You also might want to check application compatability since PowerPC applications aren't supported.
Application Compatibility
If you can't upgrade to Mountain Lion, here are the requirements for Lion.
Computer Compatibility - Lion
If you have applications that you want to use that aren't compatible, you can retain Snow Leopard and create a new partition to install Mountain Lion on.

EMac desktop is larger than the screen / display ????? Help

My oldest mac, an eMac 1 Ghz G4, 640 mb SDRAM, running 10.4.11 has had a screen display problem for months now. The graphics card is ATI Radeon 7500 (CRT - 1280 x 960 @ 72 Hz, 32 bit, no core image supported). It is over 7 years old.
The desktop is larger than the screen, so it is a hassle to constantly have to move the desktop around.
I'm not sure what it started after.
I have tried changing all the display resolutions, colors and freq to no avail. I also re-calibrated the screen without change. Updates to 10.4 have not changed it.
Is the graphics cards failing ?? There is no distortion or lines on the screen. The kids can still play games on it fine.
ANY thoughts ??

This is a real long shot, but is Zoom by chance turned on in the Universal system preference? If so, turn that off and see if that makes a difference.
If not, you can try resetting PRAM (restart the system and hold down the p, r, command and option keys until the system gives its startup chime a second time) and see if that does anything useful.
If neither of those possibilities help, I'll have one other suggestion, so post back and let us know.
Regards.

My mac is infected with viruses, Safari can not normally search for constantly appear commercials and some unknown site. What to do? antivirus free program that you recommend?

my mac is infected with viruses, Safari can not normally search for constantly appear commercials and some unknown site. What to do? antivirus free program that you recommend?

You may have installed the "VSearch" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
This trojan is distributed on illegal websites that traffic in pirated content. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

My itunes is on an old computer. So old that I can't update it and so Haven't used it in two years. How can I move it to my new laptop and make sure this doesn't happen again? Very frustrated that I've spend $$ but can't get my music.

My itunes is on an old computer. So old that I can't update it and so Haven't used it in two years. How can I move it to my new laptop and make sure this doesn't happen again? Very frustrated that I've spend $$ but can't get my music.
I want so set up itunes on my laptop and make sure that I get all of my old music and any music shared from my sons' itunes accounts. Do I have to set up itunes on my new laptop first and then use the same logins? Really concerned about losing any music, etc.

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have failed to move contacts and calendar items across you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

I have changed the apple ID (email, but on my iphone , the icloud is stil asking me to log in whit the old email.And it is poping-up on every 10 seconds.I never used icloud, and i dont want to use it.I just dont know how to disable the icloud.

i have changed the apple ID (email) but on my iphone , the icloud is stil asking me to log in whit the old email.And it is poping-up on every 10 seconds.I never used icloud, and i dont want to use it.I just dont know how to disable the icloud.

If you see that pop up you enabled icloud. Whether you want or do not want now to use it irrelevant until you actually disable activation lock.
In order to do that you have to change your apple id back to do that just long enough to sign in and back out. System will ask you to verify, don't.
Just sign in on the prompt you getting and then logout. Once done, change apple id to what you have now and verify. Then decide if you want to
use icloud (who does not want to be able to track their phone if lost or stolen).

Hi, I'm unable to use my speaker when I'm using Mac OS. However, I'm able to do so for Windows 7 OS on Bootcamp. Can anyone please advise on how to rectify this problem? I would greatly appreciate your help, thank you.

Hi, I'm unable to use my speaker when I'm using Mac OS, which means I'm unable to unmute, decrease or increase the volume. However, I'm able to do so for Windows 7 OS on Bootcamp. Can anyone please advise on how to rectify this problem? I would greatly appreciate your help, thank you.

Hi Zac, sorry to hear about your troubles, but that's why us other users are here to try to help in these instances.
Open Console in Utilities & see if there are any clues or repeating messages when this connection drop happens.

I am trying to use an external HD and need to configure it for the MAC. Can someone explain how to configure the HD (Western Digital - My Passport SE)?

Can someone help explain how to add an external HD to the Mac? I have a Western Digital My Passport SE and need to configure if for the MAC and add it to the HD location on my Mac.

Connect the external drive to the Mac. You can do that while the Mac is on, (If the drive is one that has to be plugged into a wall outlet do that too and turn the power on.) If there is a light on the drive it should turn on.
Now double click on the hard drive icon - top left of the screen of your computer. When it opens look for the Applications folder. Double click that. Next look for a folder called Utilities. Double click. In there you will see a file called Disk Utility.app. Double click on that.
You will now see something like this, with two items on the left. The second one is your new drive.
Select it - one click. And click on Erase - one of the buttons at the top, You will see this.
You must select the Format, it's a drop down - the one shown in the image above is best. You can change the name from Untitled if you want. The name can be changed later if you prefer.
At this point look at the bottom right. There is a button there called Erase. Click on it. Then go get yourself a cup of coffee - this will take a few minutes.

Apple Remote Desktop - how to change the date and time server ip address?

Our imacs keep getting out of synch with our Windows Active Directory server and when they do, users can no longer log into the imacs. The imacs this morning were more than 5 minutes fast, for example.
So, we have changed the date and time server on one of our imacs to our internal time server and that works fine. Now I would like to update all of the other imacs using a unix command in ARD. Can anyone tell me how to send this change? For this message, let's say our internal time server is 172.30.100.100

Not a problem. There are a number of other system and network setup commands that you might find useful at some time. From within the Remote Desktop Admin in the Send Unix Command window type:
networksetup -help
systemsetup -help
That will give you lists of the commands, including the one I posted above, with their basic syntax. They're handy to know.
Cheers.

I use an iPod nano 5th generation. I have had it for 2 years now and then after about a year when I plugged in my iPod to my computer, the iPod is read but the tab where I would always go that showed my list of artists to sync to my iPod does not show up

I use an iPod nano 5th generation. I have had it for about two years now and after about one year, I plugged in my iPod into my computer to sync more music. Here is the problem: The tab where you go to sync music to your iPod and shows the list of artists and songs you want to sync to the iPod, the tab I can get to but the list of songs and artists does not show up and the only way I can sync music to my iPod is to basically wipe my iPod and start from scratch. Obviously, I do not want to do that because I do not have all the songs in my library that I have on my iPod. I have uninstalled iTunes and then re-installed it, but it did not work and I do not know what else to do. I would really appreciate helpful guidance to get it fixed if it can be fixed. Thanks in advance

http://support.apple.com/kb/TS1591
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

Is it possible to use Mac OS 10.8 server as a software update server for iOS devices

Hi guys - just trying to set up a corporate iPhone deployment, but we're out in West Africa and bandwidth is limited. I'm controlling initial app deployment, but what I don't want is everyone downloading the same copy of their apps over the internet, when (ideally at least) I could download them once on the 10.8 server and push them out from there (or have them pulled). Is it possible to set up OS X Server as an iOS Software Update Server?
Thanks in advance,
Matt

and there are size limits on downloads for 3G. There have been a number of posts in the past from users who were unable to download an app or movie or whatever via 3G due to too large a file size. Of course he could use a public wifi when needed, but these may also have download limits. Also, if he's a student, he might be able to use the school's wifi.

I'm using Mac 10.8.5 - desktop. How large is the download for Ff 27.0 AND why is the download size no longer posted below the D/L icon?

Similar Messages

Maybe you are looking for