I made a passcode on my lockscreen and i forgot it and it wont let me try it any more and what it says now is " iphone is disabled connect to iTunes
I made a passcode on my lockscreen and i forgot it and i tryed so manytimes it wont let me anymore and it says " iphone is disabled connect to itunes"
So, what is your question? The passcode is there for a reason, and for obvious security reasons you can't bypass that without connecting your iPhone to the computer that it is assigned to.
Similar Messages
-
I put more wrong passcodes and then write "Iphone is disabled | Connect to iTunes". When i connect to iTunes, appear a error where write that I can't connect iPhone to iTunes because must to put a password on iPhone ( but I can't connect iPhone to iTunes because is blocked) HELP me PLEASE ! And give you more details if you want .
Sorry for my english but I am from Romania and I don't know very good .Forgot an iPhone Passcode? How to reset the iPhone passcode
iPhone and iPod touch- Wrong passcode results in red disabled screen
Please get the iPhone iOS 4 user guide. -
i have forgotten my passcode for my iphone and its now saying "iPhone is disabled connect to itunes" but i need to get in the phone to do anything on itunes !!! please help me i will be so greatful
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software. -
HT1430 Iphone is disabled connect to itunes, how to unlock my passcode?
I can't open my iPhone with my new passcode. It says: iPhone is disabled connect to itunes.
In the start of your question you said that the iPhone screen was locked with the text ‘‘iPhone is disabled connect to itunes’’. You had no way possible to even enter a code even if did have a correct code.
You were in effect locked out.
BUT after AndreweBens suggestion your screen did change to... SIM Locked. Insert a valid SIM with no PIN lock to activate iPhone. with a large button saying Unlock.
After pressing Unlock i get a screen that says...
Enter PIN 3 attempts remaining.
So.... IF you now can remember your pin, write it in here now.
IF you can not wremember the old code, then write anything in till it locks again.
once locked again, you should be able to enter your PUK code and get in. but whats your PUK code and where did you keep it? this you can get from your telephone company i think.
I hope this helps
its a bit tricky to remember correctly what the screens say in this situation but i think i am right in saying it goas like this.
once in you can then restore from your back up. urrrgh i think. -
my iphone says 'iphone is disabled connect to itunes' and when i do connect it, it says 'iphone could not connect to itunes because it is locked with a password and you need to unlock it but it doesnt let me as it is diabled???????
hi, may i know how to restore and put it on recovery mode??
as I faced the same problem as you now...
Thanks -
Hi,
My iphone has locked me out and says iphone is disabled connect to itunes. but my itunes wont connect with my iphone. i've tried everything i can think of and my phone is still locked and i cant sync it with itunes. what else can i do??While connected to iTunes, try...
http://support.apple.com/kb/HT1808 -
By accident i removed the charger while updating and now my iPhone shows me connect to iTunes and i am but my Phone doesn't show Help
You need to restore the iPhone via recovery mode. To do this follow the link below to guide you:
http://support.apple.com/kb/HT1808
Because you need to restore to factory settings all data on the iPhone will be erased. Because the iPhone was never backed up most of the data you won't be able to get back. -
i have entered wrong passcode in my iphone 5s. due to this action it has been disabled. it shows message on screen"iPhone is Disabled connect to itune"
Please resolve this issue.See here: http://support.apple.com/kb/HT1212
-
Iphone is disabled connect to itune. i forget passcode
how can i unlock? my iphone is disable connect to itune..
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
iPhone User Guide -
My PC doesn't see my iPad via iTunes, and I'm getting a message "iPad is disabled / connect to iTunes". How do I get a login screen on the iPad?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again. -
I have restarted my ipod touch a countless amount of times, and it is stuck on a screen. on the screen it says, "ipod is disabled, connect to itunes". i have also tried connecting it to itunes, and itunes says i have to type my passcode in for it to connect. but the screen is frozen, so i cant. what do i do?
For both
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I need help unlocking my iphone 4s. i jsut got it from a friend today and to unlock it i need help. when i turn the phone on it says iphone disables connect to itunes. What does this mean and what do i need to do to get my phone on??? HELP PLEASE!!!!
sriggins wrote:
What does this mean and what do i need to do to get my phone on??? HELP PLEASE!!!!
Pretty self-explanatory, don't you think?
It means just what it says...connect your phone to your computer and launch iTunes -
Iphone is disabled connect with itunes / and i dont wanna lose my data :(
my iphone is disabled it says connect with itunes / and i reallyyyyy dont wanna lose my data
i'd do anyyy thing i dont wanna lose it plzz helppIt's in recovery mode. Anything on the phone is already gone. If you didn't back it up as you should have been, then the data is permanently lost.
-
please help!...
Follow razmee post to restore from backup.
If you want to let your kids play with your iPhone, I suggest you use Guided Access.
Read here: iOS: About Guided Access -
please help me
It sounds like you never placed the iPod in recovery mode. Doing so bypasses the passcode (and erases the iPod). When you connect an iPod in recovery mode to the computer, iTunes will tell you that it found an iPod in recovery mode.
See if this program will get the iPod in recovery mode:
RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov
Maybe you are looking for
-
I'm buying a Mac mini in September - so I will have Snow Leopard - to use with the latest version of Logic and the latest version of Pro Tools and use for my college work and recording my band. I plan on using an M-Audio MobilePre USB, external hard
-
Search is not working for only one site collection
Hi All, I have one issue where users are searching something on a site collection nothing is coming out. Search is working on web application level but not in only one site collection. I checked the crawl log and found below error for this site col
-
Running a Batch file Using Java
hi All , I am executing a DOS batch file using the Java . I am using it as Process P; Runtime rt = Runtime.getRuntime(); P = rt.exec("C:\\X12TST\\BATCH1.BAT "); But in case BATCH1.bat have call to some other Batch File Say Bactch2.bat , i am not gett
-
IPhoto 9.3.2 won't open
I have OS 10.7.4 I updated iPhoto to version 9.3.2 and now it won't open. I've tried uninstalling it & reinstalling it, but still it gives me this message every time: Process: iPhoto [29854] Path: /Applications/iPhoto.app/Contents/
-
Unable to detect hosts or targets
Hi, I'm having a very basic problem. I have installed Oracle Grid control for 10.1.0.3.0 on Win XP and have a 10.2.0.1 database installed on the same box. It discovered the local database. Now I have few solaris boxes which run 10.1.0.3.0 and 10.2.0.