I moved itunes file to external hard drive and want to move the file on my pc to recycle bin. When I move i get an error message that it cannot delete ituneshelper.dll access is denied. Can I move that file to the recycle bin?
I am trying to free up space on my pc and moving itunes files to external hard drive. I have followed instructions and believe I have file copied to new drive, but I am having trouble moving file to recycle bin as the instructions say. I am getting the following error message: cannot delete ituneshelper.dll:access denied, make sure disk is not full or write protected and file not in use. I know the file is not in use when trying to move. Any help would be most appreciated. I am on Windows XP.
Yes. And you should not have moved that folder. Put it back. To move your iTunes library move the folder from User's Music.
tt2
Similar Messages
-
I recently bought a Macbook air. I had 80gb so I moved iTunes onto an external hard drive. How do i move that music onto my iPod classic?
You can only sysc with one iTunes library. The new computer is a new library. You have to restore your iPod on the new conputer and then sync.
-
Moving iTunes to an external hard driv
I'm trying to move my iTunes music to my external hard drive but when I try to drag it to my Iomega drive I get an error message saying cannot copy from or write to. Also when I try to update my iPod I get the same error message and I noticed that I am missing 2,000 or so songs from my iPod that show up in iTunes. I also should mention that I even tried restoring my iPod and I still get the same message. I did notice that each time I plug my iPod in it gains a few more songs each time. How can I move my iTunes to my external hard drive and how can I get my iPod up to date again?
Thank YouThat's why you can't write to it (it's probably NTFS format (Windows)).
You'll need to repartition it (this WILL erase all files on it):
This option will erase the disk and allow you to install the firmware update. Important: Back up your important data. Partitioning a hard disk erases all data on the disk.
1. Back up your important data. Partitioning a hard disk erases all data on the disk.
2. Open Disk Utility
3. Select your external Hard Drive (disk name).
4. Click the Partition tab in the Disk Utility window. If the partition tab is not visible, make sure you've selected the disk (not volume) in the left side of the window.
Tip: In Disk Utility, volume names are indented on the left side of the window. Disk names are not indented.
5. Choose the desired number of partitions from the Volume Scheme pop-up menu. (Choose "1")
6. Click Options.
Note: On some Intel-based Macs, the Options button does not appear under the partition tab. Use the erase tab to erase the disk instead. This will change the partition scheme to the default "GUID Partition Scheme". You can then use the partition tab to create additional partitions if desired.
7. From the Partition Scheme pop-up menu, choose "GUID Partition Scheme".
8. Click OK.
9. Make any other changes you wish in the Volume Information section, such as partition size or naming.
10. Click the Partition button to erase and partition your disk. -
Move PC iTunes library to external hard drive and consolidate with iMac
Hi, I have a PC that I'm not using much. I have a ton of iTunes music files on it so I went through the process of copying these files to my networked external hard drive. I have my iMac connected wirelessly to this same hard drive. I went into the System Preferences on the iMac to tell it where it could find the new library and I pointed it to the iTunes folder but there is not an iTunes Media folder like many of the articles state, like this one: http://support.apple.com/kb/HT1449
Do I need to create an iTunes Media folder? Note this is an iTunes Library that was on a PC, moved to a networked external hard drive and will be used on my new iMac.
Thanks.kneedragger101 wrote:
Note this is an iTunes Library that was on a PC
you might want to read these articles: one and two.
why not move your media files using _*Home Sharing*_ ? -
I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted back to a blank version of itunes and I cant get ctrl to work again. Any other ideas?
This is sometimes caused by a problem with the iTunesPrefs.xml file, normally found at C:\Users\<User>\AppData\Local\Apple Computer\iTunes\iTunesPrefs.xml. Try dragging this to the desktop and trying again.
Alternatively the problem may be that you have McAfee AV and it is preventing iTunes from updating the same file and thus causing the problem. See Why does iTunes delete my itunesprefs.xml? for details.
tt2 -
How do I back up my itunes to an external hard drive and restore from same if necessary
How do I back up my entire itunes to an external hard drive and restore from same if necessary.
ThanksThis is where iTunes stores backups for different operating systems: http://support.apple.com/kb/HT4946
I do not use a Windows machine, have a Windows Vista Dell I rarely startup now. But, from what I remember with Win boxes is, you will have to create on the external hard drive a file system like that one iTunes normally uses, and then in the iTunes preferences or control panel edit the location for the storage to specify the name of the external hard drive, or its letter code, with the name of that file system you created on the exernal drive.
I would also move all of the files from the internal file system to the external since you have now told iTunes that is where they are...before deleting from the internal drive, test iTunes to see that it goes where you want it to go. -
Now I have multiple folders in my external hard drive and want to know how to condense all folders into yearly folders instead. Anyone know how to do this?
anthonycancel wrote:
I want the folders I already backed up to come together into one folder when that year is over. Is there a way to manually do that or automatic through TM?
I'm quite sure there is no "automatic" way to do this. I've never heard of anyone trying it either. I suppose if you wanted try it, you could simply create a new folder in the same partition TM is on, label it for that year, then gather all the days for that year and drag/drop them into the folder. I suspect (but do not know) you'd be risking the continuity of your backups, meaning TM would simply start over again, meaning that next back up would start a new series of backups, with the first one roughly equalling the entire capacity of your internal HD, instead of adding only the new data to the previous backup. Once again, I would recommend against it, unless you're fine with TM starting a new series of backups if it doesn't work out the way you want it to. Hope you'll post back with results so we can learn from it. -
I am having 4S. It is showing the IOS 6 update, but whenever I try to update it, it shows an error message saying " It cannot be downloaded at this time". Can someone please tell me how to update it?
Make sure you have the Latest version of iTunes on your computer.
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch -
Itunes is too big for my laptop, i moved it to an external hard drive and now it's lost
My laptop was too slow and the hard drive was full so I added memory and it was still too full. I bought an external hard drive and tried moving my itunes to it. But now itunes can't find any of my music. I tried moving the entire itunes folder onto the external hard drive and still itunes can't find it. I tried moving everything back to the laptop - but it won't accept the file because its too big. Help!
iPods don't look for the library. iTunes does.
I recently moved my itunes music folder
Don't move your music folder.
Let iTunes do it.
Point iTunes prefs to the location where you wan tit.
Then go to menu Advanced -> *Consolidate library*.
This will copy the iTunes music folder to the location in iTunes prefs. -
Moving itunes folder to external hard drive
I moved my itunes to an external hard drive for Windows 7 using itunes 10. something. I lost all playlists and they are gone. Ive read somewhere you can get them back from your xml list in system but I'm a noobie on computers. CAN ANYONE HELP?
I moved my library from itunes folder i believe
What do you mean by "library"?
Which files/folders did you move?
Quit iTunes.
Copy the entire /Music/itunes/ folder to the external.
Hold Shift and launch iTunes.
Select Choose library and select the iTunes folder you copied to the external.
That is all you need to do. -
Moving itunes 12 to external hard drive
I have been running my itunes from an external hard drive for years. For some reason, after the last ios 8.2 update, I cant get music to stay on my ipod 5th generation ipod touch. After trying pretty much anything I could think of, and many things that the people that I chatted with at itunes thought of, I deleted all music files completely from the hard drive on my laptop, and completely uninstalled and reinstalled itunes. Is there an updated way to move itunes to my external hard drive, or a different way to get the re downloaded itunes to recognize the music that is already on my external hard drive? I am using windows 8.1
See Make a split library portable. If starting over make a new library at the root of the drive, e.g. as X:\iTunes, then move the media inside X:\iTunes\iTunes Media before adding the folder to the library.
tt2 -
Moving iTunes Library to external hard drive when iTunes can't consolidate.
Hi guys, hope you can help.
I want to move my whole iTunes library to an external hard drive and then delete it all from my laptop, and from reading around I realise I have to consolidate the library into the iTunes music folder. However, as my internal hard drive on my laptop is completely full, iTunes won't let me do this, saying I don't have enough space. Is getting the libary into the iTunes music folder the only way of getting it onto the external hard drive?
I can't really free up much space on the laptop as most of it (45 out of 60Gb) is the music I want to transfer!
Thanks very much!Over half of my stuff isn't there.
Isn't where? In iTunes or not in the iTunes folder?\>Is it possible to copy the iTunes music folder from my laptop to the external, and consolidate from iTunes directly onto there?
Why not do as I posted above? Point iTunes prefs Advanced to the external then consolidate. Everything will be consolidated to the external.
You can then delete \Music\iTunes\Media\ folder and hunt around the internal and delete all the other songs that were not in the iTunes folder. -
I am having a very hard time. First I finally got all of my music back into iTunes and then moved them all to my external hard drive. I set up iTunes to automatically put and get music from the external hard drive and whenever I open the drive al of the music is there. Now, I bought a new computer and went ahead and got iTunes all set up then tried to add folder to import from the external hard drive but all the music folders are empty! They show the names of the artists and the albums but there is nothing inside. Please help!!
If you've just moved the drive between systems then see Repair security permissions for iTunes for Windows just in case that reveals the missing files. Apply to a single album folder first as a test. Otherwise, if you've not done too much with the drive since things went missing, an undelete tool might recover the lost media. FreeRecover looks promising... Select the drive, use the options to get file paths and check file integrity, then, presumably, you can restore anything that has been deleted that looks recoverable. Backup to another drive when you're done.
tt2 -
How to move huge HD video files between external hard drives and defrag ext drive?
I have huge high definition video files on a 2TB external hard drive (and its clone). The external hard drive is maxed out. I would like to move many of the video files to a new 3TB external hard drive (G-drive, and a clone) and leave a sub-group of video files (1+ TB) on the original external hard drive (and its clone).
I am copying files from original external drive ("ext drive A") to new external drive ("ext drive B") via Carbon Copy Cloner (selecting iMovie event by event that I want to transfer). Just a note: I do not know how to partition or make bootable drives, I see suggestions with these steps in them.
My questions:
1.) I assume this transfer of files will create extreme fragmentation on drive A. Should I reformat/re-initialize ext drive A after moving the files I want? If so, how best to do this? Do I use "Erase" within Disk Utilities? Do I need to do anything else before transfering files back onto ext drive A from its clone?
2.) Do I also need to defrag if I reformat ext drive A? Do I defrag instead of or in addition to reformating? If so, how to do this? I've read on these forums so many warnings and heard too many stories of this going awry. Which 3rd party software to use?
Thank you in advance for any suggestions, tips, advice. This whole process makes me SO nervous.Here is a very good writeup on de-fragging in the OS environment that I borrowed
From Klaus1:
Defragmentation in OS X:
http://support.apple.com/kb/HT1375 which states:
You probably won't need to optimize at all if you use Mac OS X. Here's why:
Hard disk capacity is generally much greater now than a few years ago. With more free space available, the file system doesn't need to fill up every "nook and cranny." Mac OS Extended formatting (HFS Plus) avoids reusing space from deleted files as much as possible, to avoid prematurely filling small areas of recently-freed space.
Mac OS X 10.2 and later includes delayed allocation for Mac OS X Extended-formatted volumes. This allows a number of small allocations to be combined into a single large allocation in one area of the disk.
Fragmentation was often caused by continually appending data to existing files, especially with resource forks. With faster hard drives and better caching, as well as the new application packaging format, many applications simply rewrite the entire file each time. Mac OS X 10.3 onwards can also automatically defragment such slow-growing files. This process is sometimes known as "Hot-File-Adaptive-Clustering."
Aggressive read-ahead and write-behind caching means that minor fragmentation has less effect on perceived system performance.
Whilst 'defragging' OS X is rarely necessary, Rod Hagen has produced this excellent analysis of the situation which is worth reading:
Most users, as long as they leave plenty of free space available , and don't work regularly in situations where very large files are written and rewritten, are unlikely to notice the effects of fragmentation on either their files or on the drives free space much.
As the drive fills the situations becomes progressively more significant, however.
Some people will tell you that "OSX defrags your files anyway". This is only partly true. It defrags files that are less than 20 MB in size. It doesn't defrag larger files and it doesn't defrag the free space on the drive. In fact the method it uses to defrag the smaller files actually increases the extent of free space fragmentation. Eventually, in fact, once the largest free space fragments are down to less than 20 MB (not uncommon on a drive that has , say only 10% free space left) it begins to give up trying to defrag altogether. Despite this, the system copes very well without defragging as long as you have plenty of room.
Again, this doesn't matter much when the drive is half empty or better, but it does when it gets fullish, and it does especially when it gets fullish if you are regularly dealing with large files , like video or serious audio stuff.
If you look through this discussion board you will see quite a few complaints from people who find that their drive gets "slow". Often you will see that say that "still have 10 or 20 gigs free" or the like. On modern large drives by this stage they are usually in fact down to the point where the internal defragmentation routines can no longer operate , where their drives are working like navvies to keep up with finding space for any larger files, together with room for "scratch files", virtual memory, directories etc etc etc. Such users are operating in a zone where they put a lot more stress on their drives as a result, often start complaining of increased "heat", etc etc. Most obviously, though, the computer slows down to a speed not much better than that of molasses. Eventually the directories and other related files may collapse altogether and they find themselves with a next to unrecoverable disk problems.
By this time, of course, defragging itself has already become just about impossible. The amount of work required to shift the data into contiguous blocks is immense, puts additional stress on the drive, takes forever, etc etc. The extent of fragmentation of free space at this stage can be simply staggering, and any large files you subsequently write are likely to be divided into many , many tens of thousands of fragments scattered across the drive. Not only this, but things like the "extents files", which record where all the bits are located, will begin to grow astronomically as a result, putting even more pressure on your already stressed drive, and increasing the risk of major failures.
Ultimately this adds up to a situation where you can identify maybe three "phases" of mac life when it comes to the need for defragmentation.
In the "first phase" (with your drive less than half full), it doesn't matter much at all - probably not enough to even make it worth doing.
In the "second phase" (between , say 50% free space and 20% free space remaining) it becomes progressively more useful, but , depending on the use you put your computer to you won't see much difference at the higher levels of free space unless you are serious video buff who needs to keep their drives operating as efficiently and fast as possible - chances are they will be using fast external drives over FW800 or eSata to compliment their internal HD anyway.
At the lower end though (when boot drives get down around the 20% mark on , say, a 250 or 500 Gig drive) I certainly begin to see an impact on performance and stability when working with large image files, mapping software, and the like, especially those which rely on the use of their own "scratch" files, and especially in situations where I am using multiple applications simultaneously, if I haven't defragmented the drive for a while. For me, defragmenting (I use iDefrag too - it is the only third party app I trust for this after seeing people with problems using TechToolPro and Drive Genius for such things) gives a substantial performance boost in this sort of situation and improves operational stability. I usually try to get in first these days and defrag more regularly (about once a month) when the drive is down to 30% free space or lower.
Between 20% and 10% free space is a bit of a "doubtful region". Most people will still be able to defrag successfully in this sort of area, though the time taken and the risks associated increase as the free space declines. My own advice to people in this sort of area is that they start choosing their new , bigger HD, because they obviously are going to need one very soon, and try to "clear the decks" so that they maintain that 20% free buffer until they do. Defragging regularly (perhaps even once a fortnight) will actually benefit them substantially during this "phase", but maybe doing so will lull them into a false sense of security and keep them from seriously recognising that they need to be moving to a bigger HD!
Once they are down to that last ten per cent of free space, though, they are treading on glass. Free space fragmentation at least will already be a serious issue on their computers but if they try to defrag with a utility without first making substantially more space available then they may find it runs into problems or is so slow that they give up half way through and do the damage themselves, especially if they are using one of the less "forgiving" utilities!
In this case I think the best way to proceed is to clone the internal drive to a larger external with SuperDuper, replace the internal drive with a larger one and then clone back to it. No-one down to the last ten percent of their drive really has enough room to move. Defragging it will certainly speed it up, and may even save them from major problems briefly, but we all know that before too long they are going to be in the same situation again. Better to deal with the matter properly and replace the drive with something more akin to their real needs once this point is reached. Heck, big HDs are as cheap as chips these days! It is mad to struggle on with sluggish performance, instability, and the possible risk of losing the lot, in such a situation. -
I have just purchased my 1st Mac Mini,
I haven't imported any music yet except from purchased music.
I have 100gb of music on an external hard drive (already formatted to Mac OS Journaled.
I want my iTunes to be store on the External Hard drive, and to update my External Hard drive with new music I add to iTunes.
I also want to know the best way of adding my music on the Ext Hard drive e.g.: "add folder to library" or "import"
I plan on buying a Macbook Pro soon, and want to be able to use the same iTunes library.Launch iTunes with the Option key held down, click on Choose Library, and specify it. If the external drive doesn't contain the iTunes database files, create a new library there and import that music.
If the library contains any rented movies, they won't play on a different computer.
(109334)
Maybe you are looking for
-
IPhone 4/32 software upgrade problem
Environment: MS Windows 7; iTunes ver 10.3.1.55; iPhone 4/32 iOS 4.3. Problem description: everytime I run iOS upgrade to 4.3.3, after the download seems to be finished, iTunes pops up a msg box saying that my network did not respond in time and the
-
Ok I have an Iphone 5. My husband installed IO.7. (He's no help. He is a Pc user). I do not know which number after that. I bought a desktop 27.5. I was told at the Apple store to go home and hook up my IPhone 5 to my desktop. To connect to I tune
-
Hi I have a file on a server called test.exe,say. The directory structure on the server is as follows: -test -dir1
-
in order to get windows to use the ACD (20 inch model) do you have to have a video card with DVI or will a vga output with VGA to DVI connector work? If a vga to dvi connector work, how do you have to have the monitor setup (screen size by refresh ra
-
SAPSCRIPT - how to prevent data printing without underline
Hi All, I am printing header text in script from label instructions maintained in delivery. In that, header text is declared inside the character format with underline tag. This text is getting printed in the MAIN window. After, this the entire data