I need a MacBook experts, master to help me!!! I just tried the craziest move on my mac! My dad's gonna kill me if he finds out!!!
I need a MacBook experts, master to help me!!! I just tried the craziest series of moves on my mac.
Begun when the mac hung for nearly an hour. I held the power key to force a shut off.
This made me think of erasing some things on my hard drive. I used cmd r for disk utility and begun erasing volumes.
Then, I thought instead, why not just reinstall OSX since nothing I wanted was on it.
I tried to reinstall OSX but this time it loaded then suddenly said, an error occurred.
I Went back to disk utility and cleared stuff I can't even remember.
Another unbelievable thing happened. The disk utility actually hung for a good ten minutes! i went and forced a shut off again.
Now, whenever I turn the mac on, a flashing folder appears.
at this point, I usually turn to the net for answers.
Greatest thing is, every cmd something I try doesn't even trigger a reaction. Only cmd opt showed my mouse cursor.
i Do not have the original OSX install disk for my mac. Any geniuses got any clues???
Your post somehow found its way to a low-traffic forum about technical issues with posting in Apple Support Communities. I have asked the Hosts to move you to a more appropriate hardware forum for your product.
Similar Messages
-
ok so my i need help with my iphone 4s... i have about $5.00 of credits left of the itunes card i got and i decided to get a show and it says i need to verify my credit card, why doesnt it just use the credits i have? its under 5 bucks? help me please
You have to do it here for help
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html -
Plz help
Help I have accidentally deleted the var folder on my mac and now it won't start up what should I do?/var is a hidden folder, so you mustn't remove the folder.
The only solution is to reinstall OS X. If you have OS X Lion or Mountain Lion, use OS X Recovery > http://support.apple.com/kb/HT4718
Hold Command and R keys while your MacBook is starting and reinstall OS X. You won't lose anything. If you have a backup, you can restore it after starting in OS X Recovery instead of reinstalling Mac OS X, so you will save a lot of time -
Plz help
Help I have accidentally deleted the var folder on my mac and now it won't start up what should I do?Reinstall OS X.
Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
When I start my MacBook Air, I get a problem report on the Time Capsule 802.11n. When I click Continue, it asks for a password. I don't know what the password is because I didn't set this up. How can I find out what the password is?
Who set it up?
-
I'm just trying to update from 3.5.8 to the latest version. Started on the website and it downloaded a desktop image only, no application. Then tried on Firefox to update under "Help". It's been spinning for an hour! Help. I just want the latest version
If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html
*Trash the current Firefox application to do a clean (re-)install
*Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox -
My Mac has been stolen, but I have my iCloud account setup. The "find my mac" app has found the apartment block it's in, but I need an IP address for the police to go and claim it. Is there a way to see the IP address of my Mac through iCloud? I've tried to get the IP address through Gmail and Dropbox but no success. Is there any software that updates automatically that I could find the IP address through?
Shouldn't the IP address be on the box you bought the machine in? If you have the box, take it to the police as evidence that it's your machine. If I were you, I would set the firmware password when you get it back, but make sure you have the password written down in a safe place. If you forget it, there's only two ways to reset it. Either pay $400+ for the tool that can do it, or pay almost nothing for Apple to do it, I think it depends on where you live. The firmware password is this encrypted password and it can't be hacked either. The password prevents anyone from booting the machine into recovery mode, thus preventing them from restoring the computer to factory settings or performing any other functions. It's not stored in the hard drive so replacing that will be of no use either.
I hope you get your Mac back and I hope this was helpful! -
Help me please ! Trying to publish NEW site to .mac
HIya
Not sure if anyone out there can help me but I tried to make changes to my web site. I keep getting the error message
an erroe occured while publishing file 'Web/Sites/iWeb/Site'.
Was working fine last night and yet this morning nothing happens. ALSO not sure whyt but now ALL web site seems to have been completely lost and there is now a Mac page in its place saying that NOTHING exists ! cool ( not ! ) can ANYONE suggest how to re-upload a web site ?????
yours at wits end
Dhmmmmmmmmmmmm at the risk of sounding an utter
moron, what do you mean by
'name which your site has within the app '???
It's the word which appears at the top of your site organizer at the left inside iWeb. "Site" by default.
It's your .Mac url that people need, not your personal one. Your site is on .Mac.
The page which cannot be found is Able images .html. Is this really on your site? Can you provide another page name that is? (Perhaps there is a spelling error -- people wouldn't normally put a space between images and .html). -
Help! I just did the new OS update and all my photos & albums from iphoto are GONE!
I just did the new OS updated last night. When I opened Photos this morning, there was nothing. NOTHING! Not, photos in weird order or unlabeled. There were no photos period. Where did they go? What can I do? This is my work! I cannot have a decades worth of photos completely lost. Can I do something with timemachine to get them back. HELP!!!
This looks like Photos opened a new, empty library, because it could not access your iPhoto Library or Aperture Library.
Where are you storing your iPhoto Library? In the default location in the Pictures folder or on an external drive?
For Photos to be able to open your iPhoto Library, the library needs to be on a drive formatted MacOS Extended, and directly connected. It will not be able to open the library on a NAS or any network volume. -
Hello, I'm new in Apple Support Communities
Most of my e-mail goes to Junk e-mail..! I have tried the rules suggestion as soluiton of the problem, but I don't see any rules to be removed. I went to the Apple store and they couldn't resolve the problem ...Help!!! Any other suggestion?Is it being marked by your email provider? Check the raw headers and see if there is an x-spam header.
If so, you can disable Mail trusting spam headers in the Junk preferences. -
Would someone help me with this? I just downloaded a rental movie onto my ipad and now I can't find it to play it. Thanks.
It belongs in the videos app.
Did you check there? -
Okay so . . . just bought a new Mac OS X because my last MacBook Pro burned up. I was luckily able to put everything on an external hard drive. But when I try to play my movies from the hard drive or any other DVD that were downloads that are AVI it says "QuickTime Player can't open "Genetic Roulette_(360p).avi" because a required codec isn't available." So I went ahead and followed the instructions and download the DivX but it still will not play. Can anyone out there help me?
Download and install VLC. http://www.videolan.org/vlc/index.html and get rid of DivX.
-
I need help with viewing files from the external hard drive on Mac
I own a 2010 mac pro 13' and using OS X 10.9.2(current version). The issue that I am in need of help is with my external hard drive.
I am a photographer so It's safe and convinent to store pictures in my external hard drive.
I have 1TB external hard drive and I've been using for about a year and never dropped it or didn't do any thing to harm the hardware.
Today as always I connected the ext-hard drive to my mac and click on the icon.
All of my pictures and files are gone accept one folder that has program.
So I pulled up the external hard drive's info it says the date is still there, but somehow i can not view them in the finder.
I really need help how to fix this issue!you have a notebook, there is a different forum.
redundancy for files AND backups, and even cloud services
so a reboot with shift key and verify? Recovery mode
but two or more drives.
a backup, a new data drive, a drive for recovery using Data Rescue III
A drive can fail and usually not if, only when
and is it bus powered or not -
Need help rebooting Mac!
Back up all data before proceeding. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Start up in Recovery mode. When the OS X Utilities screen appears, select Disk Utility.
In the Disk Utility window, select the icon of the startup volume from the list on the left. It will be nested below another disk icon, usually with the same name. Click the Unlock button in the toolbar. When prompted, enter the login password of a user authorized to unlock the volume, or the alternate decryption key that was generated when you activated FileVault.
Then, from the menu bar, select
File ▹ Turn Off Encryption
Enter the password again.
You can then restart as usual, if the system is working. Decryption will be completed in the background. It may take several hours, and during that time performance will be reduced.
If you can't turn off encryption in Disk Utility because the menu item is grayed out, you'll have to erase the volume and then restore the data from a backup. Select the Erase tab, and then select
Mac OS Extended (Journaled)
from the Format menu.
You can then quit to be returned to the main Recovery screen. Follow these instructions if you back up with Time Machine. If you use other backup software, follow its developer's instructions.
Don't erase the volume unless you have at least two complete, independent backups. One is not enough to be safe. -
I just bought a MacBook Pro in the US and I was wondering what I need to charge it in Spain, do I just need to put the USB in the regular iPhone charger or do I need anything special?
For Mac: Just a pin converter for your charger.
For iPhone: connect to your Mac or use the pin converter and charge using the wall power adapter.
Maybe you are looking for
-
How do i edit a dwg file in Illustrator CS5?
I can't find an import menu and i can't edit the file directly. Thank you very much!
-
Why isn't my iPod Touch 4G getting detected on my computer?
My brand new iPod Touch isn't getting detected onto my Mac OS X 10.6.3 and I'm not sure why.
-
How can I fix this on my 2014 iMac, please? Verifying permissions for "Macintosh HD"Group differs on "Library/Printers/InstalledPrinters.plist"; should be 80; group is 0.Permissions differ on "Library/Printers/InstalledPrinters.plist"; should be -rw-
-
Getting information about configured(webservices.xml) web service handlers
Hi Guys, The situation is: In a Web Service, I have few GenericHandlers configured as server(Role) in webservices.xml(for IBM Runtime) & server-config.wsdd(Axis Runtime). Say the handlers are A, B & C. Now, when there is a inbound call A,B & C are ge
-
Hi there, when i press the start button on my G4 twin processor, the light inside the button comes on until I let go when it goes back off and the machine does not start up. Any ideas?