I bought a MacBook Pro in the US and I am wondering what adapter I would need to plug it in in Spain, can I just put the USB in the iPhone charger?
I just bought a MacBook Pro in the US and I was wondering what I need to charge it in Spain, do I just need to put the USB in the regular iPhone charger or do I need anything special?
For Mac: Just a pin converter for your charger.
For iPhone: connect to your Mac or use the pin converter and charge using the wall power adapter.
Similar Messages
-
i have my serial number. I bought this macbook pro in Cleveland Ohio, and it is still under warranty. Now I am travelling in India and my disk drive is not working. need local help. in chennai. I also need to retriwve my warranty paper online, as I am right now in chennai ad all my docs are in Cleveland.
You posted in the iPad forum instead of the MacBook Pro forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
Cheers, Tom -
recently bought new macbook pro , transferred data over and thought microsoft office would work on new laptop. Icons are there , although requires key codes and I don't have my key codes anymore as dog chewed the packaging!! should i just buy new software package ? I am told that this is a microsoft issue not a mac issue !! But all my other data on the old macbook pro transferred over even the icons for office for mac on the bottom app bar. only now I can't open any of my word or excel files without key code! I thought that there may have been something that could be done before having to bite the bullet and fork out for new software package.??
If this is Office for Mac 2011 then it will work on your new computer. Reinstall it. If you don't have the key code call Microsoft's activation line to get a new key code. Explain that you lost the original key code and want to install Office on your new computer.
-
I just bought my macbook pro 2 weeks ago and have noticed that when I go to start it up, it takes longer to power up than when I first bought it. Does anyone know why this may be and of a fix for it?
Hi. It could be that the more you pile on the HD, the longer it will take to boot. When I first bought my MBP, it took maybe 30 seconds. But as I began putting more content on the HD, it seemed to take a bit longer to boot. You may also want to consider putting your MBP in sleep mode. That's what I do with mine and it doesn't hurt at all as far as I can tell.
-
I bought a MacBook Pro in September 2011 and it has never worked well.
I bought a MacBook Pro in September, 2011 and it has never worked well. Are there known issues with this machine? It just stops responding, usually for 3 minutes (especially when I'm working in iPhoto or Contacts). I regret buying this machine. I wish I could just go back to my previous MacBook Pro. Any chance Apple will just exchange this for me without it costing me my other arm & leg?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
ikeep getting a message that my start up disc is full and i don't know how to free up space.. also when i o to download some files i am told there is no space left to download i bought this macbook pro used an receiver no discs.. what can i do??
You need to purchase an external drive and start moving some files to it or you can try trashing some files that you no longer need.
Download OmniDiskSweeper and see where your larger files are... you can move them to an external drive or trash them: it's up to you.
I would also begin, since it's obviously don't have backups, a backup scheme or two. See Most commonly used backup methods.
Good luck,
Clinton -
Hi i have an apple macbook air, and i have a problem the starting my mackbook air i dont know that whats the problem, i wana share a video clip 4 u see the clip and tell me that what i do or resolve this problem 1st tell me ho can i post here my video clip ?
Which Mac OS X is installed.
Troubleshooting advice can depend on that information.
Without seeing a video, tell us exactly what happens when you startup your Mac? -
So I recently bought a MacBook Pro off of someone so I can use it for school. The home folder is still in the previous owners name and I was wondering if there is any way I could change it without losing all of my stuff that is on the MacBook Pro?? Thanks for your help!
See Changing user account short name
-
When they told me about it I just thought it had a better display and decided it didn't bother me if the resolution was better, not knowing that it was thinner, has a HDMI connection, etc.
I bought my macbook pro 13 inch exactly a month ago tomorrow. If I go back and tell them this will I be able to upgrade my laptop? I paid more than $1300 or something for this one, I'd be willing to pay up to the price of the retina model, do you think I'd be able to do this?mende1 wrote:
peter_watt wrote:
If your non retina MBP has a dvd slot and a large capacity conventional hard drive, you might find the retina model would have been less convenient with lower capacity SSD and no DVD.
On the other hand, the MacBook Pro with Retina display has got a much faster drive and you can get an external DVD drive (not everybody needs a DVD drive)
Absolutely, like I say personal Choice. I believe from remarks in here that the SSD boots up on Mavericks in something like 10 seconds whereas mine takes even longer to boot than in Mountain Lion. But then we are advised to use sleep over boot as much as possible. My problem is I have 300GB of stuff and getting bigger, and when I bought mine the biggest SSD was 250 I think. For me the choice of replaceable RAM vs soldered-in RAM was a clincher. -
Recently my MacBook Pro has been freezing and showing bad graphical glitches. Multiple restarts eventually fix it and a couple of times the three tones break, three tones break warning has occurred on start up. From what I can find this is usually a RAM error but after doing a hardware check I get the response all is OK. This still happens after the check and I am unsure what the problem could be. Can anyone help? Could it be a memory issue, a hard drive issue, Graphics card issue (drivers are up to date) or is something up with the software. I also have a Bootcamp partition running Windows 7 too and this is a problem that presents itself there too.
Most likely to be RAM:
Beeps on startup:
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images.
5 beeps = processor is not usable
http://support.apple.com/kb/HT2538
I would suggest you take it to an Apple Store for a free diagnostic. -
i need help or a working solution , apple call here
Luckily I reinstalled the software and the problem just disappeared , and now for all those facing the same problem after reinstalling mountain lion don't update to 10.8.1 , cause only after that update earlier was when the problem started showing up , along with that don't reinstall lion using your recovery on your harddrive it takes 23 hours to install because it downloads the software first and then does all the installation so just download the app for mountain lion from the AppStore first and then make a bootable USB installation disk out of it , I'm sure you'll find a tutorial on google on how to make a recovery USB out of it , as for your data and stuff I moved all my stuff to an external hard drive and then performed a reinstall I recommend you do the same . The steps are simple after making the USB insert it and then reboot when the computer turns itself on press the alt/option key and then their will be a list of options there you will see your mt lion USB boot into it , select disk utility and then your Macintosh HD , WARNING IN THIS STEP YOU WILL ERASE YOUR HARD DRIVE COMPLETELY MAKE SURE YOU BACKUP ALL YOU DATA BEFORE PERFORMING THIS STEP I WON'T BE RESPONSIBLE FOR ANY DATA LOSS DO THIS AT YOUR OWN RISK, so choose your drive , go to the erase tab choose Mac os extended journaled usually the first option from the drop down menu and name it Macintosh HD again click on erase and then after thats done close the utility , now select the option to install mt lions copy from the first menu and then chose your Macintosh HD that we erased eirlier and install, it takes about 20-40 mins depending on your Mac and then viola the problem will disappear , well at least it did for me . Here is the link on HOW TO MAKE A LION RECOVERY USB
http://gigaom.com/apple/quick-tip-create-a-usb-installer-for-mountain-lion/
Hope This Would Definetly Work For you =D........... -
it says name which is "owner"
then it ask for a password? I have no idea what that could beWas the box sealed when you took the MacBook home? If it wasn't, I would return it.
Also, check the Service and Suport Coverage on the Apple site. See if the MB has been registered and if so, the date. -
I just bought a Macbook pro with renal display and it failed.
I just got home from the local Apple store with my new Macbook but within 15 minutes of startup the renal screen failed. Is this a common problem?
No - take it back to the Apple Store and have them take a look at it. WIthin 14 days of purchase you can choose to exchange for another machine or get a full refund.
Clinton -
HAVE A MACBOOK PRO 2006 WITH NO OPERATING SYSTEM ON IT WHAT OSX DO I NEED FOR A FRESH INSTALL
I had to install new hhd and have no luck w/reinstall disc, so I believe I need retail disc does it matter what version of osx I use?
There were numerous MacBook Pros released in 2006. http://www.everymac.com/systems/apple/macbook_pro/index-macbookpro.html
The earliest came with OS 10.4.5 installed, but the max is OS 10.6.x. The last came with OS 10.4.8 installed, but the max is OS 10.7.x.
If you are able to get the original install discs from Apple, you should probably upgrade to OS 10.6.x or 10.7.x.
Cheers, Tom -
I have a question about DWG files. What app will allow me to open DWG files to view them on my Macbook Pro?
Perform this Google search: ".dwg files on mac." The results should provide answers for you.
Maybe you are looking for
-
Unwatched items not syncing with Apple TV (1st Gen)
Hopefully someone can help me?... I have a 1st Gen Apple TV, Windows 7 64bit, and iTunes 11 (wishing I'd never upgraded now!) I have it set up to Custom Sync (FILMS: Automatically include 'all unwatched' films with selected films. TV PROGRAMMES: Auto
-
Open data slice for data entry and close afterwards
Dear all, I have created one data slice for a characteristic combination country xy in order to prevent the data entry within the data entry query for the user. But for some reason I have to run a planning function in order to summarize some values a
-
Problem in transforming xml to html using xsl
Hi everybody , I am creating a xml in memory and i want to transform using xsl into an html. I want to embed some html code also in the data node.But when I get the html it simply writes as it is. I tried to make it cdata section but it did not worke
-
While maintaining the Quotation the system is not allowing me to maintain the item conditions pls suggest me how to solve this error.. This function not defined Message no. 06006 Diagnosis There is no entry for this function in Table 168F (system tab
-
I am trying to install CreativeCloudSet-Up.exe file, started it up, and for last several hours "Downloading Creative Cloud desktop" bar is moving nowhere. I am behind firewall. Thanks.