I need a simple answer in how to download new IOS to my IPAD that is one of the first versions
I don't know if this is in the right discussion but I cannot find a simple answer as to how I can update my IOS on my ipad...any help is appreciated.
Connect it to iTunes, click on the iPad's name under "DEVICES" on the left, and click "Check for Updates" (may also say "Update").
Similar Messages
-
How do I import photos from my ipad that are not in the saved photos folder
I do have a saved photos album and was able to import those. However, I have several other folders and I can't figure out how to get the photos from my iPad to my new iMac. Or for that matter, into the saved photos folder. This is my first experience with iPhoto. Any help? Thanks!
If you want to remove all of your synced photos .....
Connect your iPad to your computer and launch iTunes.
Select your iPad under the devices tab in the upper right or in the left sidebar, if you have the sidebar enabled.
Click on Photos at the top of the iTunes window on the right.
Uncheck the "Sync Photos From" heading
Click on Apply in the lower right corner of iTunes.
IF that doesn't work, create an empty folder on your desktop and call it "Empty Folder". Select that folder in the "Sync Photos From" heading in the photos tab of iTunes and then click on Apply. That will also remove all synced photos. -
How to download new apps for an iPad
I have just bought an iPad and have this issue - I can't seem to find how to get new apps. The standard advice I've found trawling around online is the following:
1. Launch iTunes on your computer,having upgraded to the latest version
2. Connect your iPad to your computer.
3. Select the Apps tab in the menu.
4. Under the list of apps on the left make your choice of a cornucopia of apps
5. Click the Sync button bottom right side of the iTunes window.
Well, I keep doing the above, and get as far as point 4, but the left hand list of apps is completely empty, and what I assume is intended to be a pull down menu is greyed out, displaying only "sort by kind". So I can't get any programmes.
Any ideas please?This may be of help:
http://support.apple.com/kb/HT2001
You can also purchase apps directly from your iPad. See Chapter 15 of the iPad User's Guide:
http://manuals.info.apple.com/enUS/iPad_iOS4_UserGuide.pdf
Regards. -
How do I delete photos on my iPad that were added with the SD card adaptor?
I added photos to my iPad using the SD Card Adaptor over a year ago. They now appear in the 'Photos' tab on the iPad. They are not in Photo Stream and they do not appear in Albums under Camera Roll or Last Import. I have connected my iPad to the PC and opened the DCIM folder and they are not there at all.
I have Googled this question repeatedly and can not find an answer. I have viewed many YouTube tutorials that I thought would give me the right answer and... nope.
Can anyone please help?Thanks Clyde. But the photos do not show up in iTunes either!
Well, let's just say, that I can't see them there! All I see in iTunes under Photos is the option to Sync photos. -
I need simple instructions on how to download music to my ipod Shuffle. The website is too complicated for me to figure out.
Jimhere is the website to create your apple id:
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/212/wa/createAppleId? wosid=Jrtg8WQAz3T6qTF8cTxr0M&localang=en_US
and to download music, open up itunes
on the left hand side, click on itunes store.
sign in with the apple ID you just created and begin purchasing! -
I have a power Mac G4 with a mirror front running 10.4.9. How current of an OS can I run on this machine? I want to put it back into use but need to upgrade the OS so that I can run the newest version of Quickbooks amoung other things.
I think you're out of luck...
System Requirements:
Minimum System Requirements
Mac with an Intel processor
Mac OS X v10.6
1 GB RAM
CD-ROM drive for installation
120 MB of available disk space
Printer: 100% Macintosh-compatible printer, if you plan to print invoices, checks, deposit slips, lists, purchase orders, mailing labels, reports, or graphs
Checks: Use Intuit Checks if you plan to print checks. Canadian Image Ready Cheques are not supported.
Integration/Compatibility Requirements
Export report data requires Numbers '09 (included with iWork from Apple) or Microsoft Excel 2004 or 2008 for Mac.
E-mail requires Apple Mail; Microsoft Entourage 2004 or 2008 for Mac
Back up to MobileMe requires paid MobileMe account available separately from Apple, Inc.
iCal, iChat, and AddressBook are included in Mac OS X. Internet access required for iChat.
Accepting credit and debit cards directly into QuickBooks 2011 for Mac requires Intuit Merchant Service for QuickBooks for Mac (sold separately); subject to application approval and debit card transactions are processed as Signature Debit which does not require entering a PIN code. See http://payments.intuit.com/legal.jsp for details.
Processing payroll, integrated with QuickBooks for Mac, requires paid subscription (sold separately), EIN and Internet access. QuickBooks 2011 for Mac works with Intuit QuickBooks Payroll for Mac.
http://www.amazon.com/Intuit-413615-QuickBooks-2011-for/dp/system-requirements/B 003YJ8WFE/ref=noref?ie=UTF8&n=229534&s=software -
I have forgotten my password for icloud, have an invalid email address and do not know my security answers. How can I transfer all my data from my old iphone to the new one?
In this case you won't be able to do that?
-
hi. i bought iphone 5 witch was locked, i made factory reset and now phone asking apple ID and pasword witch i dont know. i was writing to seller but he is not answering me. how to set new account for my iphone 5 what i could use it?
The iPhone has a feature called "Activation Lock" described here:
http://support.apple.com/kb/PH13695
Without that Apple ID, you will not be able to use that iPhone. -
I'm trying to convert an m4a voice note to either mp3 or wav and can't seem to get a straight answer on how to do it without a lot of jargon. Would appreciate the help.
Yes it does.
Audio formats supported: AAC (8 to 320 Kbps), Protected AAC (from iTunes Store), HE-AAC, MP3 (8 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, 4, Audible Enhanced Audio, AAX, and AAX+), Apple Lossless, AIFF, and WAV
http://www.apple.com/ipad/specs/ -
I forgeting my Answer questions.how can get new Answer questions?
i forgeting my Answer questions.how can get new Answer questions?
Look to the right on this page under 'More like this'.
-
How do I setup my Airport Extreme so that I can extend the coverage of my existing AT&T wifi network?
Start by establishing a permanent fixed Ethernet cable connection from one of the available LAN <-> ports on the ATT modem/router to the WAN "O" port on the AirPort Extreme.
Ethernet cabling can be run up to 300+ feet or 100 meters, so you should be able to locate the AirPort Extreme exactly where it will be needed to provide more wireless signal coverage.
Configure the AirPort Extreme to "create" a wireless network using exactly the same wireless network name, same wireless security setting, and same wireless network password that the ATT wireless is using.
The final step is to insure that the AirPort Extreme is configured to operate in Bridge Mode, so it will work correctly with the ATT modem/router.
If you need more specific steps, we need to know what operating system you are using on your Mac or PC. If you have a Mac and do not know which operating system it is using.....click the Apple icon in the upper left corner of the screen and then click About This Mac, and post back with the OS X version number that you see there. -
How can I delete an app from launchpad, that doesn't have the little cross in the left top corner. The app isn't an App Store app. The application is also not present anymore in my application's folder in finder.
I tried to use the attached command through TERMINAL :
sqlite3 ~/Library/Application\ Support/Dock/*.db "DELETE from apps WHERE title='Help';" && killall Dock
sqlite3: Error: too many options: "DELETE from apps WHERE title='Help';"
Use -help for a list of options.
But i didn't work as I got the above error message.
best regards
JeroenI'm in the same boat as you -- except that I manage both a school lab (volunteer job) and macs in the enterprise (pay job). What I think we need is the Education Volume Purchasing Program
http://www.apple.com/education/volume-purchase-program/faq.html
Unfortunately this all seems a little rough around the edges -- for example, I have found updates for AppStore apps on the support.apple.com updates download site, but then when I install them via ARD they don't actually update the software. (The AppStore icons still show as needing the updates, and the version info reports the old version.) The documentation is also vague about which AppleID to use in which circumstance. I think they just haven't finished thinking through the implications of the various procedures and policies upon the various kinds of customers. When we deployed Mountain Lion on the school lab, we made an install usb and went around and installed it on each computer -- and it appears that you are on the honor system as far as paying for all of the licenses that you install. We did! But they appear to have no way to enforce it.
So far, I have only deployed 9 Lion macs in my day job, and our "solution" to the AppStore showing updates problem has been to drag the AppStore icon off of the users' docks so they don't see them! -
How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO. -
I need to delete photos from my iPad that were synced with an old version of iTunes on a computer that is no longer functioning. Please help.
Alos, I need to move many photos from my iPad to storage place. Any recommendations on backup drives for an iPad 2?The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
iPhoto for iOS (iPad): Delete photos from iPhoto
http://support.apple.com/kb/ph3137
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
~~~~~~~~~~~~
There are some wireless external hard drives that can be used with the iPad.
Best iPad External Hard Drive Storage Options
http://www.unlocktips.com/2012/11/best-ipad-mini-external-hard-drive-memory-stor age-options/
Another option:
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
Cheers, Tom -
I'm trying to update my daughter's Ipad2 to the new IOS 8 and it's got stuck on the connect to ITunes display. We don't have a computer to connect it to and it's never been connected to one. How do I get past this?
You can try a soft-reset of pressing and holding both the home and sleep buttons for 10 to 15 seconds so that it reboots, but you are likely to get the same screen. If it does then it will need to be connected to a computer's iTunes so that it can be reset back to factory defaults - do you have a friend with a computer with iTunes installed on it, or is there an Apple store nearby that you could try going to (if there is then preferably make a Genius Bar appointment at it, or don't go at a busy time) ?
Has she been backing up to the cloud ? If she has then she should be able to restore to that. If not then what she can redownload for free from the stores will show in the Purchased tabs in the store apps.
Maybe you are looking for
-
Dreamweaver Flash Buttons Paths
Hello all, I am a novice site designer. My first challenge is to design a navigation bar once and used by all web pages. I built it using Flash buttons. The concept works fine in a flat file, but when I'm viewing a web page that sits in a different
-
I have ios 5.1.1 and when I check for updates the phone says there are no updates
i have ios 5.1.1 and when I check for updates the phone says there are no updates
-
Error while using '*' as command line argument
class Expr public static void main(String[] args) if(args.length!=3) System.out.println("Usage: java Expr val1 opr val2"); System.exit(0); int a = Integer.parseInt(args[0]); char opr=args[1].charAt(0); int b =
-
Hi, Can we create a new exception message so that it appears in MD04 screen. If yes, where we can do this configuration in SPRO(please mention the configuration path) and what information is required to configure this new exception message similar to
-
I can not open a PNG file or convert my files to PNG. any help?