I need a user-exit or similar to SAPMV45A (VA02).

Hi ABAP, an older question cleared while a new one showed up.
I have to capture a text after hitting SAVE on the TA VA02.
The captured Text has to be stored, and somewhat later when the text has been replaced by the new materials text i have to replace it again with the original text it had before changing the material of the position.
probabaly i even need two user-exits, one straight after hitting save, and another short before code ends.

Hi,
Please check this link perhaps it may help.
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
Regards,
Ferry Lianto

Similar Messages

  • Needed a User Exit to cross-check the mtrll master at the time of making PR

    Hello Experts,
                          As per the requirement from my client I need a USER Exit in PR where before saving the PR the system should check the Material Master of every line item for the Material Type and MRP controller fields.
    for the particular combination of material Type and MRP controller, the system should propose an account assignment which could be achieved but User Exit is required.
    Please help.
    Thanks in advance
    and Regards
    Yawar Khan

    Hi Ravi,
                Thanks for the reply, I will check back.
    Regards,
    yawar Khan

  • I need a user exit to restrict total qantity of yeild, scrap and rework on

    Hi friends
    I need a user exit to restrict total qantity of yeild, scrap and rework on CO14 (Confirmation of Production Order Detail) not more then total qantity field in CO03 (Production Order Display). Please also mention if what I am asking is theoratically right and if possible please explain a bit from the functional point of view.
    Regards,
    Anurag Jain

    I resolved it

  • ME51N / ME52N - need special user-exit

    Hi there,
    I'm looking for an user-exit oder BAdI in transactions for creating and changing purchase requisitions. I have to write the data of an item into the ABAP-memory EVERY TIME a new position is selected. The BAdI I found is only processed when a position has changed some data.
    But I really need the user-exit every time a position/item is displayed, also in starting the transaction directly with a purchase requisition.
    Thanks a lot.
    I DON'T NEED A BIS LIST OF ALL EXITS IN THIS AREA - THX
    Kind regards
    John

    Hi,
    Try these...
    Enhancement/ Business Add-in            Description
    Enhancement
    MEREQ001                                Customers' Own Data in Purchase Requisition
    Business Add-in
    ME_COMMITMNT_PARKING                    BAdI for Redefining Commitment Interface When Parking
    ME_MEREQ_PARKING                        BAdI Purchase Requisition: "Hold"
    ME_REQ_HEADER_TEXT                      Copy Header Text: Enjoy Purchase Requisition
    No.of Exits:          1
    No.of BADis:          3
    Arunima

  • Need a user exit to add custom partner function in sales order @ item level

    Hi,
    Need a user exit to add custom partner function in sales order at item level. Goto --> Item --> Partner.
    Thanks,
    Thiyagi

    HI Leo
      To add a condition price for a condition type, this has to be assigned in the <b>pricing procedure</b>. For each condition type in a pricing procedure, we will have <b>access sequences</b>. If we follow this approch, the price is automatically extracted basing on the access sequences when condition records are maintained. For this, no coding is required and everything can be done by configuration by Functional consultant.
       Naren is right to point out on the same.
      If you need to change the price for a particular condition which already exists, you can go by <b>pricing routines</b>. Go through transaction <b>VOFM</b> for the same. 
       I advice you to discuss with your functional consultant and understand the requirement and then go for modifying accordingly.
    Kind Regards
    Eswar

  • Need a user exit to modify the quantity schedules in a sales contract

    Hi,
      I am using ECC 6.0 with IS OIL. Need a user-exit to update the quantity schedule(table OIA05) in the sales contract VA42.
    I have a new field called timestamp in the table OIA05 which needs to be updated with the timestamp value.
    I tried the user exit MV45AFZZ in USEREXIT_SAVE_DOCUMENT_PREPARE and USEREXIT_SAVE_DOCUMENT to update the values. But the new values are not being reflected. Can you please help me in this regard.
    Thanks,
    Best regards,
    Ajith

    that will allow me to append an initial line with <accit> pointing to the line. Therefore I just have to modify <accit> and the new line will then have my changes?
    Yep, that is exactly it.    So after the APPEND statement, simply fill the fields of the <accit>.
    append initial line to im_document-item ASSIGNING <accit>.
    <accit>-field1 = 'Blah'.
    <accit>-field2 = 'Blah'.
    Regards,
    Rich Heilman

  • Need a user exit for Export Control check in Sales Order fro VA01/VA02

    Hi ,
         I need a user exit for Export Legal Control process in Sales Order.since Ship-to country in the Sales Order is not always the ‘ultimate destination country’ User Exit needs to be built in with following logic
    1.     Check to see if ‘ultimate destination country’ field is maintained in Sales Order
    2.     If a value is maintained then for the Export control checks use ‘ultimate destination country’ instead of the Ship-To country (step 1)
    3.     If no value is maintained then use Ship-To country as default
    The user exit is called when the user creates or changes a Sales Order.
    Can anybody help ?
    Thanks

    Hi,
    Exit Name Description
    SDTRM001 Reschedule schedule lines without a new ATP check
    V45A0001 Determine alternative materials for product selection
    V45A0002 Predefine sold-to party in sales document
    V45A0003 Collector for customer function modulpool MV45A
    V45A0004 Copy packing proposal
    V45E0001 Update the purchase order from the sales order
    V45E0002 Data transfer in procurement elements (PRreq., assembly)
    V45L0001 SD component supplier processing (customer enhancements)
    V45P0001 SD customer function for cross-company code sales
    V45S0001 Update sales document from configuration
    V45S0003 MRP-relevance for incomplete configuration
    V45S0004 Effectivity type in sales order
    V45W0001 SD Service Management: Forward Contract Data to Item
    V46H0001 SD Customer functions for resource-related billing
    V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
    SDAPO001 Activating Sourcing Subitem Quantity Propagation
    <b>Reward points</b>
    Regarsd

  • User exit for Price Conditions in VA02 (update,insert or delete conditions)

    Hi folks. I would like to know if anyone of you has already worked with transaction VA02...I need a user exit, which could be capable to: Erase, Update and Insert new Price Conditions.
    Scenario: The user will not enter into the Price Conditions Tab. He will only make some modifications to the document via VA02 and when he saves the document, then the user exit should update, erase or include new conditions based on some logic that the user exit will implement. does anyone know a user exit for this particular case, please !
    Thanks in advance.

    HI,
    Check this.
    V60F0001                                SD Billing plan (customer enhancement) diff. to billing plan 
    V46H0001                                SD Customer functions for resource-related billing           
    V45W0001                                SD Service Management: Forward Contract Data to Item         
    V45S0004                                Effectivity type in sales order                              
    V45S0003                                MRP-relevance for incomplete configuration                   
    V45S0001                                Update sales document from configuration                     
    V45P0001                                SD customer function for cross-company code sales            
    V45L0001                                SD component supplier processing (customer enhancements)     
    V45E0002                                Data transfer in procurement elements (PRreq., assembly)     
    V45E0001                                Update the purchase order from the sales order               
    V45A0004                                Copy packing proposal                                        
    V45A0003                                Collector for customer function modulpool MV45A              
    V45A0002                                Predefine sold-to party in sales document                    
    V45A0001                                Determine alternative materials for product selection        
    SDTRM001                                Reschedule schedule lines without a new ATP check                                                                               
    Business Add-in                                                                               
    BADI_SD_SCH_GETWAGFZ                    Scheduling Agreement: Read WAGFZ from S073                   
    BADI_SD_V46H0001                        SD Customer functions for resource-related billing           
    Regards
    Rajendra

  • Look for USER EXIT/Program similar with BADI:  BADI_SCD_ACCTG for SAP 4.5B

    Hello SAP Guru,
              We are having the challenging in performing posting to multiple G/L accounts per shipment. This is required, for example, if customer, interplant, and/or inbound orders are combined onto one shipment.
             We found this BADI that allows system to work the way we want; however, BADI is not support in 4.5B.
             This BADI is linked to enhancement LMR1M002 and function module MR_ACCOUNT_ASSIGMENT. Please refer to note 64204.
             Please advise, I am looking something similar that work in SAP 4.5B.
    Regards,
    Song

    Hi,
    Please try this:
    Enhancement  LMR1M002                             Account grouping for GR/IR account maintenance                    
    Enhancement  MRMH0001        Logistics Invoice Verification: ERS procedure                    
    Enhancement  LMR1M001                             User exits in Logistics Invoice Verification          
    Enhancement  LMR1M005                             Logistics Inv. Verification: Release Parked Doc. for Posting          
    Enhancement  LMR1M004          Logistics Invoice Verification: item text for follow-on docs                    
    I hope this may helpfull and let me know wht exactly the business needs so I can give you some more exits.
    Thank you,
    Thanks,
    AMS

  • Need of User-Exit  in the creation of Sales Order(VA01)

    Hi,
    In the creation of Sales Order, I need to Compare the Ordered Quantity and Confirmed Quantity. If the CQ is less than OQ I need to create one more line item with the same material for the rest of the quantity and send the request to Production order for the remaining quantity. For this I am unable to get the exact exit. Please help me in this regard ASAP.
    Thank you.

    the following program are the user exit for billing.
    we often use RV60AFZC and RV60AFZZ.
    RV60AFZA
    RV60AFZB
    RV60AFZC
    RV60AFZD
    RV60AFZZ
    RV60BFZA
    For Sales order
    Pricing, item addtion deletion
    MV45AFZZ
    First, I did not find documentation for the BADI either. But at the first glance the process of implementing it looks quite straightforward. I assume you run R/3 Enterprise (4.7). So, you should implement BADI 'BADI_SD_SALES' - this must be done in transaction SE19. In particular for the purpose of adding some additional items into sales document I would implement method SAVE_DOCUMENT_PREPARE. This method has changing table parameter FXVBAP of type VA_VBAPVB_T - it holds all the sales document items. Just add items of yours to it. Certainly, you have to fill all the appropriate fields carefully.
    Hope this helps somehow.
    In that case you should use USEREXIT_DOCUMENT_SAVE_PREPARE subroutine (form). As far as I remember it has no parameters. To add items to the sales document you should modify internal table XVBAP.
    regards
    vinod

  • Need a User Exit for OCI Interface in case of Multiple Views

    Hello Friends,
    I need a help in finding the User Exit / BADI for passing the Catalog ID when you click on Catalog Button in Purchase Requisition , PM Order ( IW32) and Purchase Order.
    1. We have number of Views and we need to implement Custom logic for releavant Catalog ID and same should be passed to third party System.
    2. Creation of Custom Conversion module and how these will be called in MM.
    3. How the sequence number will work in Assigment of Conversion module.
    4.In case of Custom fields in RIHFCOM-CUSTFIELD1( Ex :  EBAN-ESTKZ ) / RIHFCOM-CUSTFIELD2,how this will be mapped to Standard fields in SAP
    Please help in this regard
    Thanks in Advance.
    Regards,
    Kishore,

    Hi,
    Exit Name Description
    SDTRM001 Reschedule schedule lines without a new ATP check
    V45A0001 Determine alternative materials for product selection
    V45A0002 Predefine sold-to party in sales document
    V45A0003 Collector for customer function modulpool MV45A
    V45A0004 Copy packing proposal
    V45E0001 Update the purchase order from the sales order
    V45E0002 Data transfer in procurement elements (PRreq., assembly)
    V45L0001 SD component supplier processing (customer enhancements)
    V45P0001 SD customer function for cross-company code sales
    V45S0001 Update sales document from configuration
    V45S0003 MRP-relevance for incomplete configuration
    V45S0004 Effectivity type in sales order
    V45W0001 SD Service Management: Forward Contract Data to Item
    V46H0001 SD Customer functions for resource-related billing
    V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
    SDAPO001 Activating Sourcing Subitem Quantity Propagation
    <b>Reward points</b>
    Regarsd

  • Need a USER EXIT

    Hi friends,
    When we create a debit/credit note in DPS activity , the assignment of a partner Vendor should be mandatory for the sales area is 1678-02-01,Sales document types are CR, DR, ZRE, ZCOR, ZDOR.
    since it is going to effect globally Need USER EXIT for this to check at the time of saving .
    Please give me the USER EXIT
    Thanks
    Suchi

    Hi suchitra
    USEREXIT_SAVE_DOCUMENT_PREPARE
    Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN
    I hope this user exit will help you
    Regards
    Srinath

  • Need Badi/user exit-migo-update batch classification

    Hello all,
    I need to update revision level and country of origin in batch classification tab in migo while posting GR.
    I've already done using exit "EXIT_SAPLV01Z_014".
    But this exit triggers only when classification tab is clicked in migo.
    But i need to also update rev level and country of origin when GR is posted(Save button is pressed).
    I tried MB_CF001,MB_CF001,MBCF0002,MBCF0005,MBCF0006,MBCF0007,MBCF0009,MBCF0010,MBCF0011
    and badis
    MB_DOCUMENT_BADI,CACL_VALUE_CHANGE.
    Please someone help me
    Thanks in advance

    Hi Sriram,
    If you want to add logic on particular action you need to search for exact BADI.
    e.g.
    As you are expecting that your code need to be trigger when user press SAVE button (Time of Posting) so at that time you need to check which BADI get trigger ( I am assuming that you have knowledge on how to search BADI)
    List down the BADI name and check the methods. You will get exact method name in listed BADI's.
    I am hoping that while checking badi you will find MB_MIGO_BADI just check and use method [POST_DOCUMENT] for your logic.
    Also in User Exit you will see multiple function modules in component those function modules are behaving like PAI and PBO. so you need to find out whcih function module will trigger as per your requirement.
    please find below link which will help you to understand how to search User Exit.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/0041d4e6-1e43-2e10-0db4-9386abe98fe6?overridelayout=t…
    Please let me know if its work for you.
    Regards,
    Nikhil

  • Need the user exit/BADI name for Reverese order MIGo- ME21N(changing item)

    Hi
    I have the below requirement.
    I am changing the item details in the transaction MIGO transaction,the value of MSEG entries
    are got changed.and also it should change in the Purchase order level also(in the table EKKO).
    Can anybody tell me the User Exit /BADI name which is triggered in the Reverse order
    i.e MIGO -> ME21N.So that i can implement my code in the reverse order in the User Exit/BADI.

    hi I did not find any paramater type EKPO in the Exporting or changing of any methods in the BADI's given by you...........

  • Urgent help need for user exit

    Hi all,
    i have just did one user exit but in RSA3 field is not coming. in step 1 i modified the extract structure. in step 2 in added field in include program ,saved and activated it. but field is not coming in RSA3. can anyone plese help me what should i do now or what has went wrong.
    in RSA3 update mode is 'F'
    thanks in advance

    hi,
      Have you created a project in CMOD and included your User exit component(RSAP0001) and activated it?.
    check that. otherwise give some more details reg. your problem.
    rgrds,
    v.sen.
    Message was edited by:
            Senthilkumar Viswanathan

Maybe you are looking for