Need Badi/user exit-migo-update batch classification

Hello all,
I need to update revision level and country of origin in batch classification tab in migo while posting GR.
I've already done using exit "EXIT_SAPLV01Z_014".
But this exit triggers only when classification tab is clicked in migo.
But i need to also update rev level and country of origin when GR is posted(Save button is pressed).
I tried MB_CF001,MB_CF001,MBCF0002,MBCF0005,MBCF0006,MBCF0007,MBCF0009,MBCF0010,MBCF0011
and badis
MB_DOCUMENT_BADI,CACL_VALUE_CHANGE.
Please someone help me
Thanks in advance

Hi Sriram,
If you want to add logic on particular action you need to search for exact BADI.
e.g.
As you are expecting that your code need to be trigger when user press SAVE button (Time of Posting) so at that time you need to check which BADI get trigger ( I am assuming that you have knowledge on how to search BADI)
List down the BADI name and check the methods. You will get exact method name in listed BADI's.
I am hoping that while checking badi you will find MB_MIGO_BADI just check and use method [POST_DOCUMENT] for your logic.
Also in User Exit you will see multiple function modules in component those function modules are behaving like PAI and PBO. so you need to find out whcih function module will trigger as per your requirement.
please find below link which will help you to understand how to search User Exit.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/0041d4e6-1e43-2e10-0db4-9386abe98fe6?overridelayout=t…
Please let me know if its work for you.
Regards,
Nikhil

Similar Messages

Badi/ User Exit - to update item data on Post GR in MIGO

Guyz,
I have a requirement to update the value in ALAN1 , ALAN2 fields while posting GR in MIGO. And also I need to access the value of realted PO (ebeln) and line item(ebelp) and equipment number(or serial number) EQUNR filed ,while doing the coding for this enhanemnet.
I was looking for Badi or User exit to meet the need. I have found a Badi MB_MIGO_ITEM_BADI, which I have implemented. I have put a break in the method and found that I can access all the value in the above mentioned field (IS_GOITEM, is the sturcture in the Badi signature) but one problem still persists.
I can see only the last line item(ebelp), in IS_GOITEM, where I need to see all the line item, so that I can relate which Equnr is assigned to which Lineitem.
Please tell me if you know any badi or user exit for this purpose.
Regd,
Anid
Points Guranteed
Message was edited by:
Anid

Hi,
we have checked above BADI;s but will not suffice the requirement;
The requiement is
While Creating PO(ME21N) and Changing PO(ME22N):
When the user tries to Save the PO:
All the line items should be accessible and can be editable.
If the validation fails, error message should be displayed on
the screen and user should be able to edit at that location.
Please let me know if there is any other way or enhancement point for the same...
Regards
Shiva

User exit to update Vendor Confirmation in ME22N

Hi,
I am adding a subscreen at the header level using BADI ME_GUI_PO_CUST and ME_PROCESS_PO_CUST. This new sub screen at the header level will have fields like confirmation category, delivery date..etc., and a push buttom called 'CONFIRM'. When the user selects the line items to be confirmed and clicks the 'CONFIRM' button the data from the customer subscreen should be copied to the item details(in Confirmations tab).
The problem is with the confirmation tab. I need an user exit to update this. When the PO is saved confirmation should be created and EKES table should be updated.
Any useful information will surely be rewarded
Thanks in advance
Antony.

Hi
Following enhancements are available....
Transaction Code - ME22N                    Change Purchase Order
Exit Name           Description
AMPL0001            User subscreen for additional data on AMPL
LMEDR001            Enhancements to print program
LMELA002            Adopt batch no. from shipping notification when posting a GR
LMELA010            Inbound shipping notification: Transfer item data from IDOC
LMEQR001            User exit for source determination
LMEXF001            Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001            Customer-Specific Source Determination in Retail
M06B0001            Role determination for purchase requisition release
M06B0002            Changes to comm. structure for purchase requisition release
M06B0003            Number range and document number
M06B0004            Number range and document number
M06B0005            Changes to comm. structure for overall release of requisn.
M06E0004            Changes to communication structure for release purch. doc.
M06E0005            Role determination for release of purchasing documents
ME590001            Grouping of requsitions for PO split in ME59
MEETA001            Define schedule line type (backlog, immed. req., preview)
MEFLD004            Determine earliest delivery date f. check w. GR (only PO)
MELAB001            Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1            Enhancement to Document Overview ME21N/ME51N
MEVME001            WE default quantity calc. and over/ underdelivery tolerance
MM06E001            User exits for EDI inbound and outbound purchasing documents
MM06E003            Number range and document number
MM06E004            Control import data screens in purchase order
MM06E005            Customer fields in purchasing document
MM06E007            Change document for requisitions upon conversion into PO
MM06E008            Monitoring of contr. target value in case of release orders
MM06E009            Relevant texts for "Texts exist" indicator
MM06E010            Field selection for vendor address
MM06E011            Activate PReq Block
MMAL0001            ALE source list distribution: Outbound processing
MMAL0002            ALE source list distribution: Inbound processing
MMAL0003            ALE purcasing info record distribution: Outbound processing
MMAL0004            ALE purchasing info record distribution: Inbound processing
MMDA0001            Default delivery addresses
MMFAB001            User exit for generation of release order
MRFLB001            Control Items for Contract Release Order
Hope this helps to solve ur problem....
<b>do reward if useful....</b>
regards
dinesh

Need a user exit to modify the quantity schedules in a sales contract

Hi,
I am using ECC 6.0 with IS OIL. Need a user-exit to update the quantity schedule(table OIA05) in the sales contract VA42.
I have a new field called timestamp in the table OIA05 which needs to be updated with the timestamp value.
I tried the user exit MV45AFZZ in USEREXIT_SAVE_DOCUMENT_PREPARE and USEREXIT_SAVE_DOCUMENT to update the values. But the new values are not being reflected. Can you please help me in this regard.
Thanks,
Best regards,
Ajith

that will allow me to append an initial line with <accit> pointing to the line. Therefore I just have to modify <accit> and the new line will then have my changes?
Yep, that is exactly it. So after the APPEND statement, simply fill the fields of the <accit>.
append initial line to im_document-item ASSIGNING <accit>.
<accit>-field1 = 'Blah'.
<accit>-field2 = 'Blah'.
Regards,
Rich Heilman

Updating Batch classification data from MIGO for Purchase order

Hi,
I need to update batch classification data (in MSC3n) from MIGO for purchase order. The logic needed for this is as below,
1) Pass material and batch to MCH1 table to get CUOBJ_BM.
2) Pass CUOBJ_BM to INOB table to get INOB-OBJEK.
3) Pass INOB-OBJEK to CLAF_CLASSIFICATION_OF_OBJECTS to get class name & characteristic name.
4) Pass INOB-OBJEK, CLASS name and characteristic name to BAPI_OBJCL_CHANGE to update batch classification data.
I created implicit enhancement at the bottom of FM "CLVF_VB_INSERT_CLASSIFICATION". But the problem is, the return parameter of BAPI_OBJCL_CHANGE is giving the following error.
Class type 023, object type MCH1, object RAW-6 0000001151
Object is currently locked by user
The assignment was not changed
Please let me know how to do it. Is there any BADI or User Exit?

Hi,
As you said the break point is not triggering did you activate your exit and activated even the project to which your exit is assigned.
I hope you missed activating your project in CMOD transaction. Please verify it once and if it is not activated then immediately activate it and try debugging again.
Regards,
Rafi

BADI, User Exit before FI document is posted during GR posting in MIGO

Hi Gurus,
In transaction MIGO, whenever a goods receipt is posted, a corresponding FI document is then created. I am in need of a BADI, User Exit, or other forms of enhancements that is triggered before this FI document gets posted because I have to edit data in the header (BKPF) and detail (BSEG) part, specifically the fields BKPF-XREF1_HD (Reference key 1) and (BSEG-ZUONR) (Assignment).
The field XREF1_HD is to be populated with the vendor number from MIGO (GOHEAD-LIFNR)
The field ZUONR is to be populated with the PO Number from MIGO (GOITEM-EBELN)
Regards to all,
Joseph

Hi,
I am on 4.6C.
We are using EXIT_SAPLF048_001 of enhancement F180A001 for the same.
Please note that control comes here for no of SAP transactions, hence you need to take care of it by executing your logic only for a particular SAP transaction.
I hope this helps,
Regards
Raju Chitale

BADI/User exit for MIGO fi postings

Hello Experts,
I have one requirement regarding at the time of MIGO accounting entry is generating based on the OBYC settings,now the client want along with this entry, want to create one more FI document through background,In the background we will give the debit g/l and credit g/l.That means at the time of MIGO two FI documents has to generate one is with OBYC setting gl's and second FI entry is from programe hard coded gl's.
For this requirement has any BADI/USER Exit.I appriciate your valuable inputs.
Regards,
Nivas.

Hi,
May I know why you need two accounting documents?
You may refer the similar thread: BADI / Exit required for MIGO for posting FI document
And about the number ranges - I would suggest a custom number range object and a different number range for these additional documents.
Also refer the doc: Methods to find Customer/User Exit's & BADi's for a Transaction Code!
Regards,
AKPT

BADI-User exit required for updating Purchase order header field -IHREZ

Hello All,
We have requirement in our business to update the purchase order header field "our reference" EKKO-IHREZ with some text field. We need a BADI/user exit that can be used for updating this field . We have checked the BADI ME_PROCESS_PO_CUST and unfortunately we are not able to use this BADI as it getting triggered in enjoy SAP transactions ME21N , ME22N etc. We are not creating the purchase order manually and we are using ME59N for creating Purchase order . Hence we are looking for some user exit/BADI that can be used in ME59N for updating the purchase order header field IHREZ.
Thanks in advance for your immediate response .
With regards,
Joseph Anand B

TRY using the exist u2022 EXIT_SAPLME59_001
You can also later on add this field by BAPI_PO_CHANGE

MIGO: user exit for checking batch number

Hello,
When using MIGO to do goods receipt (101 mvt) I need a user exit in each time a line is added to check the batch number entry. If the batch number is empty for certain materials issue a error message to the user.
Thanks,
Peter

where is your problem then?
If you create batches automatically with 101 ,then each line will get its batch from SAP, no need to check if there something entered manually.
Why do you customize auto creation of batches, while you want the user to enter the batches manually?
can you give a bit more background?

BADI/User Exit for custom table update from Delivery

Hi
Our requirement is to update a custom table with the delivery number and other related details when the picking status is changed to "C". Kindly suggest BADI/User exit for this requirement .
Thanks in Advance for your immediate help .

Hi Joseph,
See SAP Note 415716 - User exits in delivery processing. It says when you have the document number available, what is permitted, what not, ....
I hope this helps you
Regards
Eduardo

BADi/User Exit in J1IEX/MIGO

Hi.,
While capturing excise invoice in MIGO, iI wanna to make excise material type NONCENVATABLE as default for those items which has JMIP (Inventorized duty) in Purchase Order.If the material is maintained as Raw/asset/consumable/tools & if JMIP condition is maintained for that material in PO,then while capturing excise invoice in MIGO,it should take the excise material type as NONCENVATABLE.
Are there any Badi/User Exits for this?
Please guide on this issue
Thanks & Regards,\

Check with function module "J_1IEX_DETERMINE_CHAPTER_ID" & "J_1IEX_FILL_EXCISE_ITEMS"..

BADI or User exit to update the data in a PO(ME22N or ME21N)

Hi,
I require a BADI or an user exit to update all the line items of a PO...
Please let me know if there is a badi or user exit that triggers before the saving of the PO..and also updates the values of all the item data fields..
Thanks in advance
Regards
Shiva

Hi,
we have checked above BADI;s but will not suffice the requirement;
The requiement is
While Creating PO(ME21N) and Changing PO(ME22N):
When the user tries to Save the PO:
All the line items should be accessible and can be editable.
If the validation fails, error message should be displayed on
the screen and user should be able to edit at that location.
Please let me know if there is any other way or enhancement point for the same...
Regards
Shiva

BADI/user exit for transcation code "BP" in CRM

Hi Experts,
Is there a BADI / user exit that is triggered after successful saving/updating of Business Partner using transaction code "BP"?
We want to send general infos such as partner number, Name, Birth date, etc. about the business partner being created/updated using IDoc.
We are using CRM WinClient 4.0.
If you know the steps on how this requirement will be done, kindly post them.
Thank you very much.

I don't have any CRM system at hand, but I'm sure there are some BAdI's for this. Look in SE18 for BP or BUS, and i'm sure you will find something.
One suggestion though: Before going for the BadI, try and see if CRM also uses change pointers for sending Idoc's . This case you wont need any user exits / badis, an probably no programming at all.
Transaction
BD50: Activate Change Ptrs for Mess. Type
BD61: Activate Change Pointers - Generally
and use report RBDMIDOC for triggering IDoc.

BADI / user-exit for MD02 while creating Schedule Lines

Hi experts,
I have a problem with implementation that I'm designing.
Current situation:
While MRP run (MD02 or background) new Schedule Lines are being created in reference to MM Scheduling Agreement.
Example:
04.08.2014
SchLne
5500000415/00010
200
04.08.2014
IndReq
VSFB
200-
05.08.2014
SchLne
5500000415/00010
300
05.08.2014
IndReq
VSFB
300-
2 Schedule Lines where created - for wuantity 200 and 300.
Target:
There is a need to create more than one Schedule Line per day during MRP run. According to example there should be for example 2 Schedule Lines in 04/08 and 3 Schedule Lines in 05/08 all for quantity = 100. There is possibility to change Schedule Lines in ME38, but there is a need to make a change during creatin while MRP run.
04.08.2014
IndReq
VSFB
200-
04.08.2014
SchLne
5500000415/00010 *
100
04.08.2014
SchLne
5500000415/00010 *
100
05.08.2014
IndReq
VSFB
300-
06.08.2014
SchLne
5500000415/00010 *
100
06.08.2014
SchLne
5500000415/00010 *
100
06.08.2014
SchLne
5500000415/00010 *
100
So instead of creating only 2 Schedule Lines, MRP should create 5.
I'm looking for a BADI/user-exit to edit Schedule Lines which are to be created by MRP and change it tn reference to the needs.
I found only one BADI:
BADI: MD_CHANGE_MRP_DATA
method: CHANGE_MDPSX_MDBS
The priblem is that this method is only being executed when there are Schedule Lines which already exist.
Maybe some of you have done some extension similar to mine? Please give me advice where I should put extension.
Thanks in advance!

Dear Saravaran,
Thanks for the reply.
This will not suits to us. The provided BADI will works upto Posting the material document in transaction MIGO and it will not considered for the FI level entries.
Hope you could have understand mine requirement.
The requirement of mine is:
While doing the GR with ref to PO the material documnet will be posted and subsequently FI documnet will be generated in Background. While generating the FI document i need to manipulate the values for the G/L. So that the manipulated values will be flow into BKPF and BSEG tables.
Thanks.
Regards
Swamy

BADI/User-Exit for MD14

Hi,
Our client wants to update certain data in PR while the PRs are created from Planned orders or after a PR is created from a Planned order.
I've implemented BADI MD_PURREQ_CHANGE but while testing, the debugger is not taking to the break point.
Thus it appears that this BADI is not applicable for MD14.
I need a BADI/User exit where I can change the material description in PR.
Please help.Helpful answers shall be rewarded.

Hi abhijit,
Check this program.You will get all exits for a transaction.
TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
TABLES : TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT = 'SMOD'
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(95) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Exit Name',
21 SY-VLINE ,
22 'Description',
95 SY-VLINE.
WRITE:/(95) SY-ULINE.
LOOP AT JTAB.
SELECT SINGLE * FROM MODSAPT
WHERE SPRSL = SY-LANGU AND
NAME = JTAB-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 SY-VLINE,
2 JTAB-OBJ_NAME HOTSPOT ON,
21 SY-VLINE ,
22 MODSAPT-MODTEXT,
95 SY-VLINE.
ENDLOOP.
WRITE:/(95) SY-ULINE.
DESCRIBE TABLE JTAB.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

Need Badi/user exit-migo-update batch classification

Similar Messages

Maybe you are looking for