I need help getting my printer to work. ink system failure, oxc18a0301 error message on c7180

I don't want to have to buy another printer if I can figure out how to fix this one. Please help

Does this help? http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03112838&tmp_task=solveCategory&cc=us&dlc=en&la...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

I need help getting my printer to work

I need help getting my printer to work

http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Want-Good-Answers-Ask-Good-Questions/td...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Need help getting new printer hp deskjet 3520 setup for eprint and wireless

need help getting new printer hp deskjet 23520 stup for eprint and wireless

Hi Pastorlee7,
I see that you're having problems setting up your printer. I would take a look at the document below.
Hp deskjet 3520
Let me know how it goes.

I have problems with my printer says the ink system failure error 0xc18a0206 what do I have new cart

I have problems with my printer says the ink system failure error 0xc18a0206 what do I have new cart. Printer is Hp Photosmart c5180

This article should help resolve the error you are getting:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en
Give the steps a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

I have a 6500 officejet printer that says ink system failure what can i do to fix this if anything??

my printer 6500 office jet says ink system failure help??

I am having the same problem, but there is not error code associated with the message. It says: "Ink System Failure. Please turn Printer off and then on." No additional codes or instructrions.
I have tried to clean the heads without any luck.

I need help getting this program to work.

K. I don't pay much attention in my AP Comp Science Class.. but my teacher said if i can get this program to work i get an a for the semester... The program is Metrowerks Codewarrior IDE.. we are running it on windows 98 i think. She said she can't get it to compile.. so i guess it just needs to be able to input simple java programs (i.e. loops, just the regular crap) and compile them and run them...i have no clue what is wrong with it.. it could just need a patch...or we may just be going about it the wrong way...any help would be SUPER appreciated...

K. I don't pay much attention in my AP Comp Science
Class.. but my teacher said if i can get this programYou better did.
to work i get an a for the semester... The program is
Metrowerks Codewarrior IDE.. we are running it on
windows 98 i think. She said she can't get it toAtleast be sure of the OS.
compile.. so i guess it just needs to be able to
input simple java programs (i.e. loops, just the
regular crap) and compile them and run them...i have
no clue what is wrong with it.. it could just need aEven we don't.
patch...or we may just be going about it the wrong
way...any help would be SUPER appreciated...Nothing in your thread really speaks of the problem. And since you mentioned homework, there's hardly anyone to be interested in that.
Regards
***Annie***

Need help getting mimeopen -d to work [SOLVED]

I'm trying to set default applications on a relatively fresh install of Arch. I know in the past I've been able to just to do something like mimeopen -d file.pdf okular and it has worked, but now I get the following error message
[ryantr@myhost Downloads]$ mimeopen -d file.pdf okular
No applications found for mimetype: application/pdf
[ryantr@myhost Downloads]$ mimeopen -d file.pdf
No applications found for mimetype: application/pdf
My guess is that there is a database somewhere that needs updating. I tried running update-desktop-database but no help. I know in the past I haven't had to manually edit files for something as common as a pdf.
What am I missing? FYI, my DE is Fluxbox.
Last edited by ryan0270 (2010-12-15 05:23:14)

Ok, I finally got frustrated enough to look at this again and have it working, although I'm not sure what exactly made it work Here are the steps I did:
Looking at the verbose output of update-desktop-database seemed to indicated a directory problem. The last line says a directory did not exist so I created that...
[root@user]# update-desktop-database --verbose
Search path is now: [/usr/share/applications, /usr/local/share/applications]
File "/usr/share/applications/policytool.desktop" lacks MimeType key
File "/usr/share/applications/qtconfig.desktop" lacks MimeType key
File "/usr/share/applications/kde4/Help.desktop" lacks MimeType key
File "/usr/share/applications/kde4/knetattach.desktop" lacks MimeType key
File "/usr/share/applications/bssh.desktop" lacks MimeType key
File "/usr/share/applications/avahi-discover.desktop" lacks MimeType key
File "/usr/share/applications/dropbox.desktop" lacks MimeType key
File "/usr/share/applications/jconsole.desktop" lacks MimeType key
File "/usr/share/applications/bvnc.desktop" lacks MimeType key
File "/usr/share/applications/pidgin.desktop" lacks MimeType key
File "/usr/share/applications/assistant.desktop" lacks MimeType key
Could not create cache file in "/usr/local/share/applications": Error opening directory '/usr/local/share/applications': No such file or directory
Running update-desktop-database again got rid of the last error message but didn't fix the problem so I manually copied all the Okular related .desktop files from /usr/share/applications/kde4 to /usr/share/applications. This seemed to fix the problem, although I'm not sure why since the above error message showed problems with other .desktop files inside the kde4 directory so I'm assuming it was scanning correctly.
But it works now, for whatever reason.

Need help getting this code to work

I am trying to get this code to work using "if else statment" but it will only do the first part and not do the second part in the else statement. Can anyone help me out? Here is the code:
var R1 = this.getField("Registration Fees1");
var R2 = this.getField("Registration Fees2");
var R3 = this.getField("Registration Fees3");
var R4 = this.getField("Registration Fees4");
var R0 = 0
if (R0 == 0)
event.value = Math.floor(R1.value);
else
event.value = Math.floor(R2.value + R3.value + R4.value);
I did notice that if I fiddled around this this part:
if (R0 == 0)
sometimes I can get the second part to work but not the first. I need it to do either or and this is getting frustrating.
I might also not even need "var R0 = 0". I put that there for the condition part. If that is what is causing the problem, I can take it out. But then what would the condition be? For this form, the default is 0 and then the calculation follows by user clicking on different prices. The first part is if they want to pay for the full conference and the second part is if they want to pay for either Monday, Tuesday or Wednesday or 2 of the 3 days. Is it possible to get this to work with both parts together? I am still stuck on getting just one or the other working. Any help would be greatly appreciated. Thanks in advance.

I have posted this on another message board and a user by the name of gkaiseril offered this solution but it hasn't worked either.
// all four days
var R1 = this.getField("Registration Fees1").value;
// Monday
var R2 = this.getField("Registration Fees2").value;
// Tuesday
var R3 = this.getField("Registration Fees3").value;
// Wednesday
var R4 = this.getField("Registration Fees4").value;
var Fee = 0
event.value = ''; // default value
if (R1 != 'Off') {
Fee = Number(R1) + Fee;
} else {
if(R2 != 'Off') {
     Fee = Number(Fee) + R2;
if(R3 != 'Off') {
     Fee += Number(R3);
if(R4 != 'Off') {
     Fee = Number(R4) + Fee;
event.value = Fee;

I need help getting Mini Bridge to work in PS CS6

I have already tried deleting the folder and rebooting the computer, I have tried creating a new user account, I have tried uninstalling and reinstalling the entire package and I cannot get Mini Bridge to work at all. It just keeps going to "Mini Bridge waiting for Bridge CS6..." and then never finds anything. I am having this issue on both my Macbook Pro Retina 15 and my MacBook Pro 13 (Early 2011 model). I cannot seem to find any other solutions to this problem online. I also made sure that both Macbooks are fully updated as well as all CS6 software titles. Please help me fix this!
I also made sure I added it to the exceptions list in the firewall too.

Moving the discussion to PS forum
You can also follow the solution suggested in http://helpx.adobe.com/photoshop/kb/error-waiting-for-bridge-cs5.html
they may help

Need help getting guest access to work.

I have searched and Googled and found very little about enabling temporary guest access on an AEBS.
What I could find said just type in "the PIN number." OK, what PIN number? It appears that the device seeking access is supposed to supply it somehow and then I type it in while using the Airport Utility. I see no such number on the device. I also tried the "first one to try" method and got nowhere.
In both cases I was using an iPhone that wanted to use my network. Does this work with iPhones?
Many thanks,
-dan

This thread http://discussions.apple.com/thread.jspa?messageID=4088108&#4088108 looked helpful but I can't get guest access to work for my son's guest using a Dell XP laptop (using Dell wireless management) despite allowing timed access. Neither the PIN nor the first attempt option allowed him on the network without giving him our password.
It's still not clear if or when this will work. At the very least, the documentation is terrible.

Need help getting LCD monitor to work with G4 GeForce4 MX

I have a G4 that I haven't been using and want to get running again. It has a Nvidia GeForce4 MX video card. I had a huge CRT monitor and want to use a ViewSonic VX1935wm which I got a deal on. When I hook the monitor up it says that the resolution is out of range.
I can boot with my old monitor and change the connection and then get the LCD to work but only at certain resolutions.
Do I need to get a new video card, or can I get an adaptor? What kind of card should I get if it needs to be replaced? Or what other kind of monitor would be supported by this video card?
Here is the webpage for this monitor: http://www.viewsonic.com/products/lcddisplays/xseries/vx1935wm/

thanks for the links.
switchResX does something, but it doesn't solve the problem. i can now switch to the "optimum" resolution of 1440x900, 60hz. but when i restart the computer, it still won't work! i continue to get the "out of range" message and have to boot with my crt and then switch cables to do anything. also, the fonts in the finder menus look terrible, you can see the jagged lines.
displayConfigX won't let me test that high of a resolution without registering the product.. needless to say, i don't want to pay money if the results are going to be the same as with SwitchResX.
I sent an e-mail to ViewSonic support. Is it typical to have these problems? I am getting more and more confused as I learn more about this.

Need help getting Apple Extreme to work with Be box

Anyone able to give an idiots guide to getting Apple Extreme to work with Be Box wireless modem?
Used to have Orange (Wanadoo) broadband with Livebox wireless router, which i had my AE wired up to and it worked fine. Signed up with Be* and managed to get their wireless router working and communicating with my Mac OK. When i hooked up AE the green light came on but i can't manage to get my Mac to find it.
Any help would be very appreciated.
Thanks.

Hello Orang Hutan. Welcome to the Apple Discussions!
What is your connectivity goal for the 802.11n AirPort Extreme Base Station (AEBSn)?
o Connect it directly to the Be Box wireless router via Ethernet, or
o Connect it wirelessly to the Be Box's wireless network?
If it is to go the wireless route, do you want the AEBSn to extend the wireless range of the Be Box?

I need help with my iTunes audio configuration, its been giving me error messages for 3 weeks now!!!!

I have been receiving this message for 3 weeks now," iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." I've tried uninstalling and even deleting my quicktime player and then installing it again. I've also tried uninstalling and deleting my itunes and then redownloading it again. I have also made sure that both are up to date, but still it gives me that **** error message. I cant listen to any of my songs or any new songs, please help.

I have been receiving this message for 3 weeks now," iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." I've tried uninstalling and even deleting my quicktime player and then installing it again. I've also tried uninstalling and deleting my itunes and then redownloading it again. I have also made sure that both are up to date, but still it gives me that **** error message. I cant listen to any of my songs or any new songs, please help.

Need help getting my MacBook to work a with a D-Link print server

I'm trying to set up my MacBook Pro running OS X Ver 10.4.11 to print to a HP PSC 2210 All in One printer attached to a D-Link DP-301U print server. I'm actualy a Windows user and set this up and it works fine on the Windows side. My brother in law here is the Mac user and I can't seem to get this going.
I did install Gimp Print Ver 4.2 and the printer is listed as a support device at their website. But, the printer model doesn't appear in the list when I try and add the IP printer. I did try a LaserJet 4l driver and DeskJet 860c - they don't work. In the print queue, the status says "Network host '<IP address of D-Link> is busy; will retry in 30 seconds."
Any ideas? D-Link support was horrible, claiming that they don't support Macs - despite what it says on the box.
Any insights on next steps would be appreciated.
TIA

Thanks, Greg. GutenPrint lists it as a supported printer but as I said, I don't see it. I'll try the other site.
There is some stuff on Macs at teh D-Link site, but its not verry useful. But, re: the queue, name it appears to me that the PS-<servername>-P1 convention comes from a print server with a parallel interface and this is the LPT port name. This is a USB printer and that's why we get the PSC2210 name which I think is the Windows name I gave the Printer. At any rate, the D-Link doc claims that you should leave the queue name blank for a single port server. I beleive that the issue is that this is not a postscript printer which hopefully I can get at the alternate site.
I am curious why this is different on a Mac than in Windows. If the printer works if direct connected, why does the Mac OS need the special drivers to extend the connection through a network? I'm curious as I mooonlight setting up home networks and I don't want to be a "windows only" solution. Oh, and would this work on the Mac if I had selected an Apple print server or wireless router with printer port built in?
Thanks again.

I need help getting my Intuos5 to work with Flash CS6

Can someone give me some help with this? I can't find a single thing on Google that helps me.
I installed Adobe Flash CS6 recently and I have been using my Intuos5 Large for a long time now with Photoshop CS6. The thing is, with Photoshop, it took forever to get working properly. It turned out that I needed to use the 64-bit version because my 64-bit system and tablet drivers won't work with 32-bit Photoshop.
Concerning Flash, it's the same problems as Photoshop. It refuses to recognize my tablets functions such as pressure and tilt sensitivity. It also has an annoying lag or lack of response if I do small, quick strokes. I would switch Flash to 64-bit mode, but there isn't one. I can't find the little stroke-like icon in Flash to turn on sensitivity either. I'm really confused. I've tried it with Flash CS5.5 and it's the same thing.
That's my issue, and I have tried restarting the software and rebooting many times as well. There doesn't seem to be much for options. This all leads to it probably being a 64-bit and 32-bit compatability issue
I'm running Windows 7 with more than enough power to maintain Flash CS6. It is possible that I may need to update my tablet driver since I did for Photoshop CS6, but it was a pain in the *** getting Photoshop to work until I used 64-bit mode. I may need additional files to mod the software.
I would really appreciate the help so I can begin to learn animation. It's my passion. Thanks, in advance.
Here are my relevant specs:
System Information
Time of this report: 9/4/2012, 01:32:48
       Machine name: LAPPY_TOPPY
   Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120503-2030)
           Language: English (Regional Setting: English)
System Manufacturer: TOSHIBA
       System Model: Satellite L675
               BIOS: Phoenix SecureCore Version 2.30
          Processor: Intel(R) Core(TM) i5 CPU       M 450 @ 2.40GHz (4 CPUs), ~2.4GHz
             Memory: 4096MB RAM
Available OS Memory: 3954MB RAM
          Page File: 2016MB used, 5890MB available
        Windows Dir: C:\windows
    DirectX Version: DirectX 11
DX Setup Parameters: Not found
   User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
    DWM DPI Scaling: Disabled
     DxDiag Version: 6.01.7601.17514 64bit Unicode
Display Devices
          Card name: ATI Mobility Radeon HD 5650
       Manufacturer: ATI Technologies Inc.
          Chip type: ATI display adapter (0x68C1)
           DAC type: Internal DAC(400MHz)
         Device Key: Enum\PCI\VEN_1002&DEV_68C1&SUBSYS_FD001179&REV_00
     Display Memory: 2735 MB
   Dedicated Memory: 1014 MB
      Shared Memory: 1721 MB
       Current Mode: 1600 x 900 (32 bit) (60Hz)
       Monitor Name: Generic PnP Monitor
      Monitor Model: unknown
         Monitor Id: LGD01CA
        Native Mode: 1600 x 900(p) (60.080Hz)
        Output Type: Internal

If you are moving from an existing Mac to a new Mac the easiest thing to do is connect the two Macs via a Firewire cable and run the Migration assistant. If you are moving files from a Windows platform or you don't want to use the Migration assistant review this article.
http://docs.info.apple.com/article.html?artnum=300173

I need help getting my printer to work. ink system failure, oxc18a0301 error message on c7180

Similar Messages

Maybe you are looking for