I need help in redoing FaceTime profile and canceling old one?, I need help in redoing FaceTime profile and canceling old one?

Need help with redoing facetime profile as I cannot log into with old password?

Hi Lynnefromusa!
Here is an article that will help you reset your password for you Apple ID:
Apple ID: If you forget your password
http://support.apple.com/kb/ht5787
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Similar Messages

Airport Utility no longer sees Airport Extreme and I think I need to redo my entire network - can someone help?

I just purchased this new Airport Extreme after my older Airport went down. This Airport Extreme at times is super fast, but it gives me more headaches than the older version because it seems to drop its signal too often. Last week I was able to see my Airport Extreme in my Airport Utility and was able to configure it - now Airport Utility can't find any Airport Extreme, although, it shows that I have an internet connection. I was hoping that someone who knew how to do a nice easy network set-up could help me start from scratch so this is set up right. As of now, our home uses the wi-fi for 2 Wii consoles, a wi-fi printer, cell phones, and an internet connection for my MacBook Pro - not too many connections, but still my connection drops all the time, all day long for no particular reason whatsoever. I want to be able to have one good strong connection for my computer and the rest of the connections could be secondary. I would like if the secondary items used a password, but not the same password as the main connection. It seems to me like I'm not asking a lot, but I have no idea how to set this up because now I can't even find my Airport Extreme to configure it.
So, if anybody has some advice on the best way to set this up and how I would be able to start that process without being able to even detect my Airport Extreme, I would sure appreciate any effort to help me out on this.

Is your profile up to date?? Lion is not so commonly used now.. but was a lot more reliable than Yosemite.
What modem do you have? Actual make and model is a big help.
What is the main router? Is the modem supplied by ISP? Is it a gateway device?
If you use the airport as bridge or router, I also need to know how it is connected into the system. Mostly people have it via ethernet to the main modem or router.. please confirm.
One very important point.. the Wii need WEP security at least for older models.. You must NOT change security on the Extreme.. It must be set to WPA2 Personal (or nothing if you live at least 2km from other humans).
So, if anybody has some advice on the best way to set this up and how I would be able to start that process without being able to even detect my Airport Extreme
reset to factory and you will get control back.
The best way to test is full factory reset.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer or iOS device with latest utility.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen6 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz for each band respectively.. with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem if you are using AE as main router but is a problem for when it is used in bridge.. you have to use dhcp reservation from main router or use static IP on the AE setup.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. If the AE is bridged and still having dropouts use a LAN port to connect to the main router instead of WAN.. we are finding the AE is problematic on the WAN port.

Hey guys i need help with facetime and i am ready to blow up!

I got some many ppl telling me that i have to pay for facetime! My dad got iphone 4 and we live in canada (calgary) My brother lives in Australia and i have mac! Is facetime free to talk to him! Telus is telling us that it will cost my dad 2 dollars a min then Rogers is telling us it is free! I need help cause if both have wifi it should be free! We want to know! Please let me know! thanks! I am ready to blow up here LOL!

All FaceTime calls are over WiFi, thus they are "free", unless you're using a WiFi hotspot that charges for its use.

FaceTime requests to my iPod AND iMac computer, which is not wanted.. please help! Need answers ASAP.

I just bought a iMac Intel. I was playing around with the settings and I typed in my Apple ID into the computer and connected my FaceTime to it. I also have a iPod touch (fourth generation) in which case, I have all my contacts on and information on. At first, it wasn't exactly working.. I think. I imported my contacts but they weren't showing up onto my contacts list, nor my contacts list on the FaceTime app. So, I logged out of my Apple ID and yes, there was a pop up asking me to delete all the information imported and I did press delete. But now, my iMac is logged out of my Apple ID. On the contacts list, it says there are no contacts. And it's literally empty. BUT, I'm recieving FaceTimes on my iPod which are also popping up onto the iMac. I went into my Settings, and literally everything was disconnected. In the contacts, there were none, 0. No iMessages. Nothing. But I'm still recieving FaceTimes to both devices, which I don't want. I need help trying to disconnect everything from the iMac, I do not want my FaceTimes also being recieved on there. PLEASE HELP ME, I AM STRUGGLING.
Also, how do you reset all the settings on there? Even if there is no solution to finding a way to stop FaceTimes to going to both devices, obviously, there is but, on my iPod there is a setting that says "Erase All Content and Settings", can you do that on a iMac? If yes, please tell me how. Somebody please help me, I'm actually very in the need of help.

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

I have two apple products registered to the same apple id. I would like to use FaceTime on my iPad while out of town. I need to do FaceTime to my iMac at home (both iPad and imac are reg. to same id). It won't let me do it, help?

I have two apple products registered to the same apple id. I would like to use FaceTime on my iPad while out of town. I need to do FaceTime to my iMac at home (both iPad and imac are reg. to same id). It won't let me do it, help?

You should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer.

Need help understanding profiles and color management

I made the big leap from inexpensive inkjets to:
1 Epson 3800 Standard
2 Spyder3Studio
I have a Mac Pro Quad, Aperture, PS3, etc.
I have a steep learning curve ahead, here's what I've done:
1 Read a lot of books, watched tutorials, etc.
2 Calibrated the monitor
3 Calibrated the printer several times and created .icc profiles
What I've found:
1 The sample print produced by Spyder3Print, using the profile I created with color management turned off in the print dialog, looks very good.
2 When I get into Aperture, and apply the .icc profile I created in the proofing profile with onscreen proofing, the onscreen image does not change appreciably compared with the no proof setting. It gets slightly darker
3 When I select File>Print image, select the profile I created, turn off color management and look a the resulting preview image it looks much lighter and washed out than the onscreen image with onscreen proofing turned on.
4 When I print the image, it looks the same as was shown in the print preview...light and washed out, which is much different than what is shown in edit mode.
5 When I open PS3 with onscreen soft-proofing, the onscreen image is light and washed out...just like displayed in PS3 preview. If I re-edit the image to look OK onscreen, and print with the profile and color management turned off, the printed image looks OK.
So, why am I confused?
1 In the back of my simplistic and naive mind, I anticipated that in creating a custom printer profile I would only need to edit a photo once, so it looks good on the calibrated screen, and then a custom printer profile will handle the work to print a good looking photo. Different profiles do different translations for different printers/papers. However, judging by the PS work, it appears I need to re-edit a photo for each printer/paper I encounter...just doesn't seem right.
2 In Aperture, I'm confused by the onscreen proofing does not present the same image as what I see in the print preview. I'm selecting the same .icc profile in both locations.
I tried visiting with Spyder support, but am not able to explain myself well enough to help them understand what I'm doing wrong.
Any help is greatly appreciated.

Calibrated the printer several times and created .icc profiles
You have understand that maintaining the colour is done by morphing the colourants, and you have understood that matching the digital graphic display (which is emissive) to the print from the digital graphic printer (which is reflective) presupposes a studio lighting situation that simulates the conditions presupposed in the mathematical illuminant model for media independent matching. Basically, for a display-to-print match you need to calibrate and characterise the display to something like 5000-55000 kelvin. There are all sorts of arguments surrounding this, and you will find your way through them in time, but you now have the gist of the thing.
So far so good, but what of the problem posed by the digital graphic printer? If you are a professional photographer, you are dependent on your printer for contract proofing. Your prints you can pass to clients and to printers, but your display you cannot. So this is critical.
The ICC Specification was published at DRUPA Druck und Papier in Düsseldorf in May 1995 and ColorSync 2 Golden Master is on the WWDC CD for May 1995. Between 1995 and 2000 die reine Lehre said to render your colour patch chart in the raw condition of the colour device.
The problem with this is that in a separation the reflectance of the paper (which is how you get to see the colours of the colourants laid down on top of the paper) and the amount of colourant (solid and combinations of tints) gives you the gamut.
By this argument, you would want to render the colour patch chart with the most colourant, but what if the most colourant produces artifacts? A safer solution is to have primary ink limiting as part of the calibration process prior to rendering of the colour patch chart.
You can see the progression e.g. in the BEST RIP which since 2002 has been owned by EFI Electronics for Imaging. BEST started by allowing access to the raw colour device, with pooling problems and whatnot, but then introduced a primary ink limiting and linearisation.
The next thing you need to know is what colour test chart to send to the colour device, depending on whether the colour device is considered an RGB device or a CMYK device. By convention, if the device is not driven by a PostScript RIP it is considered an RGB device.
The colour patch chart is not tagged, meaning that it is deviceColor and neither CIEBased colour or ICCBased colour. You need to keep your colour patch chart deviceColor or you will have a colour characterisation of a colour managed conversion. Which is not what you want.
If the operating system is colour managed through and through, how do you render a colour test chart without automatically assigning a source ICC profile for the colourant model (Generic RGB Profile for three component, Generic CMYK Profile for four component)?
The convention is that no colour conversion occurs if the source ICC device profile and the destination ICC device profile are identical. So if you are targetting your inkjet in RGB mode, you open an RGB colourant patch chart, set the source ICC profile for the working space to the same as the destination ICC profile for the device, and render as deviceColor.
You then leave the rendered colourant test chart to dry for one hour. If you measure a colourant test chart every ten minutes through the first hour, you may find that the soluble inkjet inks in drying change colour. If you wait, you avoid this cause of error in your characterisation.
As you will mainly want to work with loose photographs, and not with photographs placed in pages, when you produce a contract proof using Absolute Colorimetric rendering from the ICC profile for the printing condition to the ICC profile for your studio printer, here's a tip.
Your eyes, the eyes of your client, and the eyes of the prepress production manager will see the white white of the surrounding unprinted margins of the paper, and will judge the printed area of the paper relative to that.
If, therefore, your untrimmed contract proof and the contract proof from Adobe InDesign or QuarkPress, or a EFI or other proofing RIP, are placed side by side in the viewing box your untrimmed contract proof will work as the visual reference for the media white.
The measured reference for the media white is in the ICC profile for the printing condition, to be precise in the WTPT White Point tag that you can see by doubleclicking the ICC profile in the Apple ColorSync Utility. This is the lightness and tint laid down on proof prints.
You, your client and your chosen printer will get on well if you remember to set up your studio lighting, and trim the blank borders of your proof prints. (Another tip: set your Finder to neutral gray and avoid a clutter of white windows, icons and so forth in the Finder when viewing.)
So far, so good. This leaves the nittygritty of specific ICC profiling packages and specific ICC-enabled applications. As for Aperture, do not apply a gamma correction to your colourant patch chart, or to colour managed printing.
As for Adobe applications, which you say you will be comparing with, you should probably be aware that Adobe InDesign CS3 has problems. When targetting an RGB printing device, the prints are not correctly colour managed, but basically bypass colour management.
There's been a discussion on the Apple ColorSync Users List and on Adobe's fora, see the two threads below.
Hope this helps,
Henrik Holmegaard
technical writer
References:
http://www.adobeforums.com/webx?14@@.59b52c9b/0
http://lists.apple.com/archives/colorsync-users/2007/Nov/msg00143.html

Need urgent help on how to compare the user profile and process form attributes

Hi All,
We have a requirement where after editing the user profile attributes we have to compare the currently modified user profile attributes and the existing
process form attributes and based on the differences we have to update the process form accordingly.
We have around 80 attributes so we cannot follow the procedure where
we update the lookup process_triggers
and add the "change attribute" task
and "update attribute" taskin the process definition
because it creates aroung 160 tasks in process definition. So we are doing it by writing a custom code. Is there any other simple way to do it or any API"s which can help us.
Need very quick help.Thanks in advance.
Regards,
Geetha

Check MOS: 1595938.1
-Bikash

TS3367 I bought this ipad 3 wifi+cellular from Saudi Arabia but I live in Pakistan and so want to use call n FaceTime feature in it but can not find these features in my ipad so I really need help in this regard? Help would really be appriciated Thankyou

I bought ipad 3 wifi+cellular from Saudi Arabia a month back and can not find a call feature or even FaceTime feature on it. I really have struggle online to find a way out but could not find any way out to use these features of ipad. I no not live in Saudi Arabia. My purpose of purchasing "cellular ipad" was to use cellular features whereas sadly I am not able to do so. Please I need a solution to this problem and would really appreciate the HELP. :)

Aqdas Hayat wrote:
.... Please I need a solution to this problem and would really appreciate the HELP.
The Device you have, because of where it was Purchased will never be able to have FaceTime.
All you can do is sell it and buy a Device from a non restrictive country.
FaceTime in the Middle East

Firefox works fine on version 26. When it updates to version 27, i get undefined entity. I've tried getting profile manager to run and it won't. Need help

Version 26 works fine. When it updates to version 27.01, I get undefined entity. I've tried uninstalling and then reinstalling. I've tried to bring up profile manager but it doesn't come up. I've tried deleting Firefox folders. I'm very disappointed that Firefox rolls out an update that causes problems. None of your recommendations is working and I really hate to lose Firefox but this is pathetic. I'm using version 26 as much as i can till someone gives me the right solution. Is there a simple link to click on that will clear up any old profiles and simply fix this issue?

That means you need to clean reinstall.
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
More information about reinstalling Firefox can be found [https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems?esab=a&s=troubleshooting&r=3&as=s#w_5-reinstall-firefox here].
Please report back to see if this helped you!
Thank you.

TS4185 I have downloaded facetime from the App store and I keep receiving this message - An internal FaceTime error occurred. There was a problem with FaceTime. You need to quit and open FaceTime again. Please help!

I have downloaded facetime from the App store and I keep receiving this message - An internal FaceTime error occurred. There was a problem with FaceTime. You need to quit and open FaceTime again. Please help!

This error message could result from an incorrect setting for date and time, or an operating system which does not have the latest updates installed. It's a good idea to have your location setting on automatic. Turn on the wi fi in your mac for a minute or so, to allow it to automatically search for your present location. Do this even though you have the correct time Date settings displayed.

I need help !! On my ipad mini my FaceTime and iMessage will not set up and it's annoying

I need help my I message or FaceTime will not set up

iOS: Troubleshooting FaceTime and iMessage activation
The Complete Guide to FaceTime + iMessage: Setup, Use ... - iLounge

HT5622 Hey Hi ! I brought iPhone 5 in Kuwait and now I'm in India now.I noticed my FaceTime option is missing. No option no settings and no data related to FaceTime . I'm very much worried about it. Need help as soon as possible.

Hey Hi ! I brought iPhone 5 in Kuwait and now I'm in India now.I noticed my FaceTime option is missing. No option no settings and no data related to FaceTime . I'm very much worried about it. Need help as soon as possible.

Someone could have stolen it in Kuwait...happens all the time .
Seriously...FaceTime is banned there...there is no way to add it back to your phone...if you wanted FaceTime, you should not have purchased your phone there.
BTW: You don't have any warranty or support for this phone in India.
You live & you learn

HT204380 I can't access my FaceTime and messages through my iPod touch, I need help please!!!

I can't access my FaceTime and messages through my iPod touch, I need help please!!!

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
You posted in the iPad forum instead of the iPod forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
 Cheers, Tom

I have just reset my password about a hundred times and still the facetime and I messenger is not accepting my password, I previously had FaceTime working now nothing is happening, I need help now please

I have just reset my password about a hundred times and still the face time and I messenger is not working, I previously used FaceTime once and now I need help urgently
What am I not doing?

Hi fatbear711. are the following as follows? Settings/restrictions: Facetime and Camera are both ON? Also in Game centre at bottom 'Adding Friends" is turned on? If all ok, log into your account via itunes App, Click on your ID at bottom left of say the Music page, then click to 'Manage', enter password. On next page click on your apple ID at top, then select to go to '[email protected]'. Log in on the browser window page that appears and confirm that your primary apple ID and primary email have been verified (should have green ticks and the word 'verified' next to them. If you use itunes on a pc to sync with then do this through iTunes;Store menu on your pc, ensuring that you sync your device once finshed. You will also need to check that your device is set to the correct timezone and time in your devices settings page. If problem still persists at least we'll know the basics are ok.
When you post again can you also include whether ipad2/3 etc and iOS e.g. 5.3.1/6.01 etc
Best regards
Nick

Help! I downloaded Firefox, because I need it to deal with a particular website. Only, I can't cut and paste MY OWN FILES! It tells me I need to adjust my 'profile'. Yet all the packaged instructions don't make sense.

I'm told that I need to change 'profile' settings, yet I cannot seem to do this.

Try using this extension to set those permissions - Allow Clipboard Helper: <br />
https://addons.mozilla.org/en-US/firefox/addon/allowclipboard-helper/

I need help in redoing FaceTime profile and canceling old one?, I need help in redoing FaceTime profile and canceling old one?

Similar Messages

Maybe you are looking for