I need help to use PL/SQL UTL_HTTP package

I need to use UTL_HTTP to get a page from Internet, and I already get the response. The following is the code.
req := UTL_HTTP.BEGIN_REQUEST('http://www.yahoo.com);
resp := UTL_HTTP.GET_RESPONSE(req);
LOOP utl_http.read_line(resp, value, TRUE);
dbms_output.put_line(value);
-- DBMS_LOB.WRITEAPPEND (lob_c,LENGTH(value), value);
END LOOP;
utl_http.end_response(resp);
other process
EXCEPTION
WHEN utl_http.end_of_body THEN
utl_http.end_response(resp);
However, after utl_http.read_line read the last line, it throw a exception.
I want to know how can I avoid this situation and read all the response
Thanks

Hi,
Check the Sample Code provided by Oracle.
http://www.oracle.com/technology/sample_code/tech/pl_sql/htdocs/x/Utl_Http_Package_Enhancements/Cr_Using_Utl_Http.htm
Regards
RK

Similar Messages

Need help about using sqlplus_exec_template.sql

I tried to use sqlplus_exec_template.sql to execute our deployed mapping. At dos prompt I typed :
C:\>sqlplus username/[email protected] @C:\OWB\owb\rtp\sql\sqlplus_exec_template.sql
rtschema localhost SQL_LOADER CRD_APPL_MAPPING SKIP=0,LOAD=0,LOG_FILE
NAME=cvcpmapl.log,DIRECT=true,PARALLEL=false,ERRORS=50,ROWS=200,READSIZE=65536,BINDSIZ E=50000,AUDIT=true,PURGEGROUP=wb,target_store_uoid=F0E49963A42E4DB6AFF
85FFF8E05AB9E
SQL*Plus: Release 9.2.0.1.0 - Production on Fri May 16 18:32:25 2003
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Session altered.
Role set.
Stage 1: Decoding Parameters
| location_name=localhost:1521:odb
| task_type=SQL_LOADER
| task_name=CRD_APPL_MAPPING
Stage 2: Opening Task
declare
ERROR at line 1:
ORA-20001: Task not found - Please check the Task Type, Name and Location are
correct.
ORA-06512: at line 261
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
=================================================
I am quite sure the task name and task type is correct. The task name is same as the one I saw in runtime repository schema -> table WB_RT_TASKS -> column TASK_NAME
, but I am very doubt about what should be the correct input for LOCATION, system parameter and custom parameter.
Can anyone give some help about where could I find the correct input for those parameter?
Thx in advance.
Rds
CH

I 've tried to use :
sqlplus username/[email protected] @C:\OWB\owb\rtp\sql\sqlplus_exec_template.sql
rtschema OWBLOCATION SQL_LOADER CRD_APPL_MAPPING "," ","
where OWBLOCATION I have used the deploy location of the mapping for my case, created within OWB. The value is CCS_DEPLOY.
But the error is the same :
======================================================
Stage 1: Decoding Parameters
| location_name=CCS_DEPLOY
| task_type=SQL_LOADER
| task_name=CRD_APPL_MAPPING
Stage 2: Opening Task
declare
ERROR at line 1:
ORA-20001: Task not found - Please check the Task Type, Name and Location are
correct.
ORA-06512: at line 261
========================================================
could you tell me the SQL used by WB_RT_API to get the task from runtime schema. So that I could check the correct location myself.
Or how could I view the pl/sql of WB_RT_API_EXEC which is wrapped.
Thx for your help.
Rg.
CH

Need help in using FM BAPI_MATERIAL_SAVEDATA

Gurus,
I need help in using the FM BAPI_MATERIAL_SAVEDATA. The FM is returning a message that says "The field MARA-MEINS/BAPI_MARA-BASE_UOM(_ISO) is defined as a required field; it does not contain an entry".
I have supplied the necessary details and yet the FM won't push through.
If possible, please post sample codes.
Below is my sample code:
===============================================
REPORT zmm_materialupload.
eject
$$******************************************************************************
$$    TYPES
$$******************************************************************************
eject
$$******************************************************************************
$$    INTERNAL TABLES (custom structure
$$******************************************************************************
eject
$$******************************************************************************
$$    RANGES
$$******************************************************************************
eject
$$******************************************************************************
$$    FIELD-SYMBOLS
$$******************************************************************************
eject
$$******************************************************************************
$$    PARAMETERS & SELECT-OPTIONS
$$******************************************************************************
SELECTION-SCREEN BEGIN OF BLOCK 1 WITH FRAME TITLE text-001.
*SELECT-OPTIONS: s_matnr FOR mara-matnr.
SELECT-OPTIONS: s_mtart FOR mara-mtart.
SELECT-OPTIONS: s_mbrsh FOR mara-mbrsh DEFAULT 'P'.
SELECT-OPTIONS: s_werks FOR marc-werks DEFAULT '1000' OBLIGATORY.
SELECT-OPTIONS: s_lgort FOR marc-lgpro DEFAULT 'OPSL' OBLIGATORY.
PARAMETERS: p_path LIKE rlgrap-filename DEFAULT 'C:\Documents and Settings\training_11\Desktop\Book4 (2ITEMS).txt' OBLIGATORY.
SELECTION-SCREEN END OF BLOCK 1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_path.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      field_name = 'P_FNAME'
    IMPORTING
      file_name = p_path.
eject
$$******************************************************************************
$$    START-OF-SELECTION
$$******************************************************************************
START-OF-SELECTION.
PERFORM check_input.
PERFORM get_file.
PERFORM filter_input.
PERFORM populate_tabs.
PERFORM bapi_mat.
eject
$$******************************************************************************
$$    FORMS
$$******************************************************************************
FORM bapi_mat.
LOOP AT it_tab INTO wa_tab.
    CALL FUNCTION 'BAPI_MATERIAL_GETINTNUMBER'
      EXPORTING
        material_type    = wa_tab-mtart
        industry_sector = wa_tab-mbrsh
        required_numbers = 1
      TABLES
        material_number = it_matnr.
ENDLOOP.
LOOP AT it_matnr INTO wa_matnr.
    READ TABLE it_tab INTO wa_tab INDEX sy-tabix.
    wa_tab-matnr = wa_matnr-material.
    MODIFY it_tab FROM wa_tab INDEX sy-tabix.
ENDLOOP.
PERFORM populate_tabs.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
    EXPORTING
     headdata                   = it_headdata
    clientdata                 = it_clientdata
    clientdatax                = it_clientdatax
    plantdata                  = it_plantdata
    plantdatax                 = it_plantdatax
    FORECASTPARAMETERS         =
    FORECASTPARAMETERSX        =
    PLANNINGDATA               =
    PLANNINGDATAX              =
    STORAGELOCATIONDATA        =
    STORAGELOCATIONDATAX       =
    valuationdata              = it_valuationdata
    valuationdatax             = it_valuationdatax
     WAREHOUSENUMBERDATA        =
    WAREHOUSENUMBERDATAX       =
    SALESDATA                  =
    SALESDATAX                 =
    STORAGETYPEDATA            =
    STORAGETYPEDATAX           =
    flag_online                = ' '
    flag_cad_call              = ' '
    NO_DEQUEUE                 = ' '
    NO_ROLLBACK_WORK           = ' '
   IMPORTING
     return                     = it_return
   TABLES
     materialdescription        = it_materialdescription
     unitsofmeasure             = it_unitsofmeasure
     unitsofmeasurex            = it_unitsofmeasurex
     internationalartnos        = it_internationalartnos
     materiallongtext           = it_materiallongtext
     taxclassifications         = it_taxclassifications
     returnmessages             = it_returnmessages
    PRTDATA                    =
    PRTDATAX                   =
    EXTENSIONIN                =
    EXTENSIONINX               =
IF sy-subrc = 0.
ENDIF.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      wait   = 'X'
    IMPORTING
      return = it_return.
ENDFORM.                    "bapi_mat
*&      Form GET_FILE
      text
FORM get_file.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
    EXPORTING
      text = 'Getting data from file...'.
MOVE: p_path TO gv_file.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                = gv_file
      filetype                = 'ASC'
      has_field_separator     = 'X'
      read_by_line            = 'X'
    TABLES
      data_tab                = it_tab
    EXCEPTIONS
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      OTHERS                  = 17.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    "GET_FILE
*&      Form check_input
      text
FORM check_input.
Material Type
IF s_mtart-low IS INITIAL AND s_mtart-high IS INITIAL.
   s_mtart = 'IEQ'.
   s_mtart-low = 'ABF'.        "Waste
   s_mtart-high = 'ZTRD'.      "Stock Items
   APPEND s_mtart.
ENDIF.
IF s_mtart-low IS NOT INITIAL AND s_mtart-high IS INITIAL.
    MOVE: s_mtart-low TO s_mtart-high.
ENDIF.
Industry Sector
IF s_mbrsh-low IS INITIAL AND s_mbrsh-high IS INITIAL.
   s_mbrsh = 'IEQ'.
   SELECT mbrsh
   FROM mara
   INTO TABLE it_mbrsh.
   s_mbrsh-low = wa_mbrsh-mbrsh.
   LOOP AT it_mbrsh INTO wa_mbrsh.
     s_mbrsh-high = wa_mbrsh-mbrsh.
   ENDLOOP.
   APPEND s_mbrsh.
ENDIF.
IF s_mbrsh-low IS NOT INITIAL AND s_mbrsh-high IS INITIAL.
    MOVE: s_mbrsh-low TO s_mbrsh-high.
ENDIF.
Plant
IF s_werks-low IS INITIAL AND s_werks-high IS INITIAL.
    s_werks = 'IEQ'.
    s_werks-low = '1000'.
    s_werks-high = '2000'.
ENDIF.
IF s_werks-low IS NOT INITIAL AND s_werks-high IS INITIAL.
    MOVE: s_werks-low TO s_werks-high.
ENDIF.
Storage Location
IF s_lgort-low IS NOT INITIAL AND s_lgort-high IS INITIAL.
    MOVE: s_lgort-low TO s_lgort-high.
ENDIF.
ENDFORM.                    "check_input
*&      Form Filter_input
      text
FORM filter_input.
SORT it_tab BY matnr mtart mbrsh werks lgort.
LOOP AT it_tab INTO wa_tab.
   IF wa_tab-mtart NOT IN s_mtart.
     DELETE it_tab WHERE mtart NOT IN s_mtart.
   ENDIF.
   IF wa_tab-mbrsh NOT IN s_mbrsh.
     DELETE it_tab WHERE mbrsh NOT IN s_mbrsh.
   ENDIF.
    IF wa_tab-werks NOT IN s_werks.
      DELETE it_tab WHERE werks NOT IN s_werks.
    ENDIF.
    IF wa_tab-lgort NOT IN s_lgort.
      DELETE it_tab WHERE lgort NOT IN s_lgort.
    ENDIF.
ENDLOOP.
ENDFORM.                    "Filter_input
*&      Form populate_tabs
      text
FORM    populate_tabs.
LOOP AT it_tab INTO wa_tab.
    MOVE: wa_tab-matnr TO wa_headdata-material,
          wa_tab-mbrsh TO wa_headdata-ind_sector,
          wa_tab-mtart TO wa_headdata-matl_type,
                   'X' TO wa_headdata-basic_view,
                   'X' TO wa_headdata-sales_view,
                   'X' TO wa_headdata-purchase_view,
                   'X' TO wa_headdata-mrp_view,
                   'X' TO wa_headdata-account_view.
         wa_tab-matkl TO wa_clientdata-matl_group,
         wa_tab-meins TO wa_clientdata-base_uom,
         wa_tab-groes TO wa_clientdata-size_dim,
         wa_tab-gewei TO wa_clientdata-unit_of_wt,
         wa_tab-ntgew TO wa_clientdata-net_weight,
                  'X' TO wa_clientdatax-matl_group,
                  'X' TO wa_clientdatax-base_uom,
                  'X' TO wa_clientdata-size_dim,
                  'X' TO wa_clientdatax-unit_of_wt,
                  'X' TO wa_clientdatax-net_weight,
         wa_tab-werks TO wa_plantdata-plant,
         wa_tab-ekgrp TO wa_plantdata-pur_group,
         wa_tab-prctr TO wa_plantdata-profit_ctr,
         wa_tab-werks TO wa_plantdatax-plant,
                  'X' TO wa_plantdatax-pur_group,
                  'X' TO wa_plantdatax-profit_ctr,
         wa_tab-werks TO wa_valuationdata-val_area,
         wa_tab-bklas TO wa_valuationdata-val_class,
         wa_tab-peinh TO wa_valuationdata-price_unit,
         wa_tab-verpr TO wa_valuationdata-moving_pr,
         wa_tab-stprs TO wa_valuationdata-std_price,
         wa_tab-xlifo TO wa_valuationdata-lifo_fifo,
         wa_tab-werks TO wa_valuationdatax-val_area,
                  'X' TO wa_valuationdatax-val_class,
                  'X' TO wa_valuationdatax-price_unit,
                  'X' TO wa_valuationdatax-moving_pr,
                  'X' TO wa_valuationdatax-std_price,
                  'X' TO wa_valuationdatax-lifo_fifo.
    APPEND wa_headdata TO it_headdata.
   APPEND wa_clientdata TO it_clientdata.
   APPEND wa_plantdata TO it_plantdata.
   APPEND wa_valuationdata TO it_valuationdata.
   MODIFY it_tab FROM wa_tab TRANSPORTING matnr.
ENDLOOP.
ENDFORM.                    "populate_tabs
$$******************************************************************************

Hai.
check the below example.
REPORT z34332_bdc_create_material .
data: la_headdata type BAPIMATHEAD,
la_clientdata type BAPI_MARA,
la_CLIENTDATAX type BAPI_MARAX,
la_return type BAPIRET2.
data: i_materialdescription type table of BAPI_MAKT,
wa_materialdescription like line of i_materialdescription.
la_headdata-MATERIAL = '000000000000000004'.
la_headdata-IND_SECTOR = 'M'.
la_headdata-MATL_TYPE = 'FERT'.
la_clientdata-BASE_UOM = 'FT3'.
la_CLIENTDATAX-BASE_UOM = 'X'.
la_clientdata-MATL_GROUP = '01'.
la_CLIENTDATAX-MATL_GROUP = 'X'.
wa_materialdescription = 'TEST'.
append wa_materialdescription to i_materialdescription.
clear: wa_materialdescription.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata = la_headdata
CLIENTDATA = la_clientdata
CLIENTDATAX = la_CLIENTDATAX
PLANTDATA =
PLANTDATAX =
FORECASTPARAMETERS =
FORECASTPARAMETERSX =
PLANNINGDATA =
PLANNINGDATAX =
STORAGELOCATIONDATA =
STORAGELOCATIONDATAX =
VALUATIONDATA =
VALUATIONDATAX =
WAREHOUSENUMBERDATA =
WAREHOUSENUMBERDATAX =
SALESDATA =
SALESDATAX =
STORAGETYPEDATA =
STORAGETYPEDATAX =
FLAG_ONLINE = ' '
FLAG_CAD_CALL = ' '
IMPORTING
RETURN = la_return
TABLES
MATERIALDESCRIPTION = i_materialdescription
UNITSOFMEASURE =
UNITSOFMEASUREX =
INTERNATIONALARTNOS =
MATERIALLONGTEXT =
TAXCLASSIFICATIONS =
RETURNMESSAGES =
PRTDATA =
PRTDATAX =
EXTENSIONIN =
EXTENSIONINX =
write: la_return-TYPE, ',', la_return-MESSAGE.
clear: la_headdata, la_return, la_clientdata, la_clientdatax.
regards.
sowjanya.b.

Need help in using ActiveX to retrieve a VARIANT

Need help in using ActiveX to retrieve a VARIANT.
Variant is shown as var{VT_Ul1,1} in debug
Using the following
hr = CA_VariantGetShort (&var, &value);
I get 0 for my answer instead of 1.
Solved!
Go to Solution.

Answered my own question.
VT_Ul1 is an unsigned char and not a short.

Need help on Using Oracle Acces Manager 11g

Hi
I Need help on Using Oracle Acces Manager Admin console to configure for SSO.
I am new to Identity Management
I have installed OAM 11g and configured for OAM in new weblogic domain
Please help to proceed forward.
Thanks
Swapnil

Hi
Thanks for your reply
I am able to login to the console
I am unable to login the the weblogic server from another machine but abl eto do so from the machine where all this is installed
What i feel is there needs to be some configurataion maybe policy or Agent
IDMDomainAgent is configured and so is the OAM server configured .
Please advice some books or link how to do achieve logging into the weblogic em/console from a remote machine
Thanks in Advance

I need help on using up Microsoft.

i need help on using up microsoft
Moderator's Note: Post was moved and changed the title into a subject-related title. This is to keep the forum organized and let other forum users easily see and respond to this post.

Please, we need the error message word for word. If you do not get an error message, please, elaborate in greater detail …
Furthermore, which phone model do you use?

Need help in using sleep function in pl/sql

Hi,
need help:
I have a condition where i want to validate total_pass=total_fail and
I want to use the sleep function in a pl/sql where i want to wait for 2 minutes ie.checking
whether total_pass=total_fail based upon class_id .
I have the data in the table as:
CLASS_ID TOT_PASS TOT_FAIL
1 10 10
2 5 4
3 6 6
4 7 5
Any help will be needful for me

I'm not quite sure what you are lookg for here, but whatever it is, your code as posted won't do it. You will never break out of the WHILE r_Class.Tot_Pass = r_Class.Tot_Fail loop, since these values will never change because you never get the next record form the cursor.
From your original data, it looks like your cursor will return multiple rows which implies to me that you want to fetch the first row from the cursor, check if tot_pass = tot_fail, if they are equal, sleep for two minutes then get the next row. This does not make sense to me. Once the select in the cursor is executed, the data it returns will not change due to Oracle's read consistency model, so there seems to me no point in the sleep.
The other alternative I can see is that you want to check all the returned rows, and if tot_pass = tot_fail for one of the rows (or possibly for all of the rows), then you want to sleep and try again.
If you can explain in words what it is you are trying to accomplish, someone will be able to point you to a solution.
John

Error invoking SSL web service using pl sql UTL_HTTP

Web Services Gurus,
I am invoking a secure web service based on the following WSDL file from a pl/sql program using UTL_HTTP package.
The web service is secure and prompts for authentication.
The web services certificate is imported in Oracle Wallet on Database Server.
I am listing the WSDL file, the pl/sql code and error message as follows -
1. The WSDL file -
<definitions
name="Webservice"
targetNamespace="http://webservice.airclic.com/"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://webservice.airclic.com/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
>
<types>
<xs:schema targetNamespace="http://webservice.airclic.com/" version="1.0" xmlns:tns="http://webservice.airclic.com/"
xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="Exception" type="tns:Exception"/>
<xs:element name="sendAuthenticationResponse" type="tns:sendAuthenticationResponse"/>
<xs:element name="sendAuthenticationResponseResponse" type="tns:sendAuthenticationResponseResponse"/>
<xs:complexType name="AuthenticationResponse">
<xs:complexContent>
<xs:extension base="tns:Response">
<xs:sequence>
<xs:element name="success" type="xs:boolean"/>
<xs:element name="username" type="xs:string"/>
<xs:element minOccurs="0" name="password" type="xs:string"/>
<xs:element minOccurs="0" name="firstName" type="xs:string"/>
<xs:element minOccurs="0" name="lastName" type="xs:string"/>
<xs:element minOccurs="0" name="email" type="xs:string"/>
<xs:element minOccurs="0" name="active" type="xs:boolean"/>
<xs:element minOccurs="0" name="timeZone" type="xs:string"/>
<xs:element minOccurs="0" name="group" type="xs:string"/>
<xs:element minOccurs="0" name="role" type="xs:string"/>
<xs:element minOccurs="0" name="errorCode" type="xs:string"/>
<xs:element minOccurs="0" name="errorMessage" type="xs:string"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<xs:complexType name="DispatchEvent"></xs:complexType>
<xs:complexType name="sendAuthenticationResponse">
<xs:sequence>
<xs:element minOccurs="0" name="authenticationResponse" type="tns:AuthenticationResponse"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="sendAuthenticationResponseResponse">
<xs:sequence/>
</xs:complexType>
<xs:simpleType name="status"></xs:simpleType>
<xs:simpleType name="source"></xs:simpleType>
<xs:simpleType name="eventType"></xs:simpleType>
</xs:schema>
</types>
<message name="Webservice_sendAuthenticationResponse">
<part name="sendAuthenticationResponse" element="tns:sendAuthenticationResponse"/>
</message>
<message name="Webservice_sendAuthenticationResponseResponse">
<part name="sendAuthenticationResponseResponse" element="tns:sendAuthenticationResponseResponse"/>
</message>
<portType name="Webservice">
<operation name="sendAuthenticationResponse" parameterOrder="sendAuthenticationResponse">
<input message="tns:Webservice_sendAuthenticationResponse"/>
<output message="tns:Webservice_sendAuthenticationResponseResponse"/>
<fault name="Exception" message="tns:Exception"/>
</operation>
</portType>
<binding name="WebserviceBinding" type="tns:Webservice">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="sendAuthenticationResponse">
<soap:operation soapAction=""/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
<fault name="Exception">
<soap:fault name="Exception" use="literal"/>
</fault>
</operation>
</binding>
<service name="Webservice">
<port name="WebservicePort" binding="tns:WebserviceBinding">
<soap:address location="https://host.airclic.com:443/webservice/product/fieldservice/v1/Webservice"/>
</port>
</service>
</definitions>
2. The pl/sql code that calls the web service operation sendAuthenticationResponse
procedure send_auth_response
as
soap_request varchar2(30000);
soap_respond varchar2(30000);
http_req utl_http.req;
http_resp utl_http.resp;
resp XMLType;
i integer;
begin
-- initiate wallet for AirClic certificate
dbms_output.put_line ('1');
utl_http.set_wallet('file:/etc/oracle/wallet','<wallet password>');
-- create soap request
dbms_output.put_line ('2');
soap_request:= '<?xml version = "1.0" encoding = "UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<SOAP-ENV:Body>
<ns1:sendAuthenticationResponse xmlns="https://host.airclic.com:443/webservice/product/fieldservice/v1/Webservice" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<success xsi:type="xsd:boolean">true</success>
<username xsi:type="xsd:string">changlanih</username>
<password xsi:type="xsd:string">abcd1234</password>
<firstName xsi:type="xsd:string">hero</firstName>
<lastName xsi:type="xsd:string">changlani</lastName>
<email xsi:type="xsd:string">[email protected]</email>
<active xsi:type="xsd:boolean">true</active>
<timeZone xsi:type="xsd:string">eastern</timeZone>
<group xsi:type="xsd:string">Northeast</group>
<role xsi:type="xsd:string">Service Manager</role>
<errorCode xsi:type="xsd:string"></errorCode>
<errorMessage xsi:type="xsd:string"></errorMessage>
</ns1:sendAuthenticationResponse>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>';
-- request that exceptions are raised for error Status Codes
dbms_output.put_line ('3');
utl_http.set_response_error_check (true);
-- allow testing for exceptions like UTL_HTTP.http_server_error
dbms_output.put_line ('4');
utl_http.set_detailed_excp_support (true);
--utl_http.set_transfer_timeout (ln_time_out);
dbms_output.put_line ('5');
utl_http.set_body_charset ('UTF-8');
-- begin request
dbms_output.put_line ('5.5');
http_req:= utl_http.begin_request
('https://host.airclic.com:443/webservice/product/fieldservice/v1/Webservice/sendAuthenticationResponse', ------ is the url correct here ?
'POST',
'HTTP/1.1'
dbms_output.put_line ('6');
utl_http.set_authentication(http_req, '<username for webservice>', '<password for webservice user>');
dbms_output.put_line ('7');
utl_http.set_persistent_conn_support (http_req, false);
dbms_output.put_line ('8');
utl_http.set_header(http_req, 'Content-Type', 'text/xml'); -- since we are dealing with plain text in XML documents
dbms_output.put_line ('9');
utl_http.set_header(http_req, 'Content-Length', length(soap_request));
dbms_output.put_line ('10');
utl_http.set_header(http_req, 'SOAPAction', ''); -- required to specify this is a SOAP communication
dbms_output.put_line ('11');
utl_http.write_text(http_req, soap_request);
dbms_output.put_line ('12');
http_resp := utl_http.get_response(http_req);
-- debug messages
DBMS_OUTPUT.PUT_LINE('-------utl_http.get_response---------------------');
DBMS_OUTPUT.PUT_LINE('http_resp.status_code is :'||http_resp.status_code );
DBMS_OUTPUT.PUT_LINE('http_resp.reason_phrase is :'||http_resp.reason_phrase);
DBMS_OUTPUT.PUT_LINE('http_resp.http_version is :'||http_resp.http_version);
DBMS_OUTPUT.PUT_LINE('http_resp.private_hndl is :'||http_resp.private_hndl);
DBMS_OUTPUT.PUT_LINE('-------utl_http.get_response----------------------');
utl_http.read_text(http_resp, soap_respond);
dbms_output.put_line ('13');
utl_http.end_response(http_resp);
dbms_output.put_line ('14');
resp := XMLType.createXML(soap_respond);
dbms_output.put_line ('15');
resp := resp.extract('/soap:Envelop/soap:Body/child::node()',
'xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"');
i:=0;
dbms_output.put_line ('16');
loop
dbms_output.put_line(substr(soap_respond, 1 + i * 255, 250));
i := i + 1;
if (i * 250) > length(soap_respond) then
exit;
end if;
end loop;
exception
when utl_http.request_failed then
dbms_output.put_line('request failed: ' || utl_http.get_detailed_sqlerrm);
when utl_http.http_server_error then
dbms_output.put_line('server error: ' || utl_http.get_detailed_sqlerrm);
when utl_http.http_client_error then
dbms_output.put_line('client error: ' || utl_http.get_detailed_sqlerrm);
when others then
dbms_output.put_line(sqlerrm);
end send_auth_response;
3. Output when I run the send_auth_response procedure
Connecting to the database cpdev.
1
2
3
4
5
5.5
ORA-12560: TNS:protocol adapter error
Process exited.
Disconnecting from the database cpdev.
Comments -
The web service operation only has input message. The input message consists of a complex type as seen in WSDL.
Questions -
1. This is my first attempt in invoking a web service from pl/sql program. Is the code in SOAP body correct as mapped to the complex type in WSDL ?
2. As seen from the dbms_out - the last message before ORA-12560 is 5.5, that means the call is erroring at following code line -
http_req:= utl_http.begin_request ------ what am I doing wrong here ?
3. The web service is SSL as seen from WSDLand needs a username/password for access - which is being performed by following code line -
utl_http.set_authentication(http_req, '<username for webservice>', '<password for webservice user>'); ------- is that correct ?
4. I am not using any proxy server - should I be using it ? When is it necessary to use proxy ?
Appreciate any help.
Thanx.

Oracle is hosted by HOST A - this is where the pl/sql program resides.
The Web Service being accessed by pl/sql program is hosted by HOST B and there are 4 firewalls in between.
Oracle was not even able to establish connection to web services host.
Escalated the issue with networking folks and they resolved the connectivity problem.
Hope that helps.

Need help in rewriting a sql query

Can any one please tell me if there is any utility that can help me correcting the sql I have I need to tune the query as its taking lot of time. I want to use some tool that will help me re-formating the query.
Any help in this regard will be highly appreciated.

If you think that Oracle SQL Tuning Tools like SQL Tuning Advisor and SQL Access Advisor are not helping.
You might look into thrid party tools like Quest- SQL Navigator and TOAD.
But I don't advise this based on the following:
Re: Oracle Third Party Tools and Oracle Database
Oracle have enough tools of its own to satisfy the various needs.
Adith

Need help in writting the sql

The sql
select 'alter system kill session '||sid||','||serial#||';' from v$session where username= 'EV05';
give the output in the below given form
alter system kill session 69,38769;
But i need the output to be
alter system kill session '69,38769';
Can some one re-writes the sql select statment,
Thanks
Naveen

Naveen,
This isn't the forum for help with writing SQL - rather with using the SQL Developer product. In future, I would suggest that you use the SQL and PL/SQL forum for these sorts of questions.
However, to answer your question this time, you can include a ' in a string by having two together ie 'fred''s' will return the string fred's.
The following SQL will give you the result you want:
select 'alter system kill session '''||sid||','||serial#||''';' from v$session where username= 'EV05';

Need help with min max sql

hi all, forgot i had a user name and password and haven't needed help for quite a bit since i didn't do sql for a while but now i'm back at reporting again...
Here is a sample table as i remember it:
Item     Date     Time     Time Frame     Duration     Duration Frame
A     20100926     0     5     500     10
A     20100926     600     10     500     30
A     20100926     1500     12     100     30
B     20100926     1800     28     200     40
B     20100926     2200     6     150     70
B     20100926     2600     15     600     60
B     20100926     3600     30     200     70
Results Set (expected):
Item     Date     Time     Total Duration
A     20100926     0     1600:20     --basically max (time+duration) - min(time+duration)
B     20100926     1800     2000:00
Sorry, but. I didnt put my sql statement as I wasn't planning on posting and left it at work, but, i've been looking on internet and people say to use min/max function and i've attenpted it with it works with just this table (without grouping). But as soon as i group it the values seem to mess up.
Last i remembered it gave me:
Item     Date     Time     Total Duration
A     20100926     0     1600:30     --basically max(time+duration) - min(time+duration)
B     20100926     1800     2000:70
I think it's looking at max duration which is 30&70 and hence it retrurns those values in the result set. Is it because of the max function hence it's returning this value? any help is appreciated. thanks
Edited by: stanleyho on Sep 30, 2010 4:44 PM

Okay, here we go again, repost, hopefully okay this time:
Hi Madhu, okay, just got to work: I am using TOAD and working in Oracle 10g. Here is my table structure and the query i use to try and get what I am looking for:
There is one extra table but that is only used to link these two tables listed below so i didn't bother posting it.
TABLE: TX_RECON_INSTANCE_VIEW
ColumnName ColID DataType Null
CHANNEL_CODE 3 VARCHAR2 (4 Char) N
DURATION 8 NUMBER (10) N
DURATION_FRAME 9 NUMBER (2) N
REAL_TIME 6 NUMBER (10) N
REAL_TIME_FRAME 7 NUMBER (2) N
ITEM_ID 4 NUMBER Y
TX_DATE 2 CHAR (8 Byte) N
TX_ID 1 NUMBER (9) N
TX_TYPE 13 VARCHAR2 (4 Char) N
TABLE: TX_SCHEDULE
ColumnName ColID PK Null DataType
TX_TYPE 22 N VARCHAR2 (4 Char)
TX_ID 1 1 N NUMBER (9)
TX_DATE 2 N CHAR (8 Byte)
SCHEDULE_TIME_FRAME 9 N NUMBER (2)
SCHEDULE_TIME 8 N NUMBER (10)
REAL_TIME 10 N NUMBER (10)
DURATION_FRAME 13 N NUMBER (2)
DURATION 12 N NUMBER (10)________________________________________
And the data and results:
TX_ID TX_DATE REAL_TIME REAL_TIME_FRAME DURATION DURATION_FRAME ITEM_ID AS RUN TIME AS RUN DURATION SCHEDULED TIME SCHEDULED DURATION SCHEDULE_TIME SCHEDULE_TIME_FRAME DURATION_1 DURATION_FRAME_1
1651000 20100710 0 0 545 20 1234 00:00:00:00 00:09:05:20 00:00:00:00 00:09:05:20 0 0 545 20
1752223 20100710 667 12 281 7 1234 00:11:07:12 00:04:41:07 00:11:07:10 00:04:41:07 667 10 281 7
1846501 20100710 1071 13 335 9 1234 00:17:51:13 00:05:35:09 00:17:50:09 00:05:35:09 1070 9 335 9
2001102 20100710 1525 6 249 14 1234 00:25:25:06 00:04:09:14 00:25:22:08 00:04:09:14 1522 8 249 14
3246669 20100710 1800 0 586 2 1235 00:30:00:00 00:09:46:02 00:30:00:00 00:09:46:02 1800 0 586 2
4456822 20100710 2492 16 276 5 1235 00:41:32:16 00:04:36:05 00:41:32:16 00:04:36:05 2492 16 276 5
1253168 20100710 2890 15 222 17 1235 00:48:10:15 00:03:42:17 00:48:10:15 00:03:42:17 2890 15 222 17
1112456 20100710 3277 18 297 0 1235 00:54:37:18 00:04:57:00 00:54:35:10 00:04:57:00 3275 10 297 0
Grouped results set:
TX_DATE ITEM_ID AS RUN TIME AS RUN DURATION SCHEDULED TIME SCHEDULED DURATION
20100710 1234 00:00:00:00 00:29:34:20 00:00:00:00 00:29:31:20
20100710 1235 00:30:00:00 00:29:34:17 00:30:00:00 00:29:32:17
--> SCHEDULED DURATION "00:29:31:20" is not correct as it should be (00:25:22:08+00:04:09:14)-(00:00:00:00)=00:29:31:22
--> see expected results below
Expected results:
TX_DATE ITEM_ID AS RUN TIME AS RUN DURATION SCHEDULED TIME SCHEDULED DURATION
20100710 1234 00:00:00:00 00:29:34:20 00:00:00:00 00:29:31:22
20100710 1235 00:30:00:00 00:29:34:18 00:30:00:00 00:29:34:10________________________________________
And the query I am using:
SELECT --TXR.TX_ID,
TXR.TX_DATE, TXR.ITEM_ID,
TO_CHAR(TRUNC((MIN(TXR.REAL_TIME) KEEP (DENSE_RANK FIRST ORDER BY TXR.REAL_TIME) )/3600),'FM00')||':'||TO_CHAR(TRUNC(MOD(MIN(TXR.REAL_TIME) KEEP (DENSE_RANK FIRST ORDER BY TXR.REAL_TIME) ,3600)/60),'FM00')||':'||TO_CHAR(MOD(MIN(TXR.REAL_TIME) KEEP (DENSE_RANK FIRST ORDER BY TXR.REAL_TIME) ,60),'FM00')||':'||TO_CHAR(MOD(MIN(TXR.REAL_TIME_FRAME) KEEP (DENSE_RANK FIRST ORDER BY TXR.REAL_TIME) ,60),'FM00') "AS RUN TIME",
to_char(trunc((MAX(TXR.REAL_TIME+TXR.DURATION)-MIN(TXR.REAL_TIME))/3600),'FM00')||':'||to_char(trunc(mod(MAX(TXR.REAL_TIME+TXR.DURATION)-MIN(TXR.REAL_TIME),3600)/60),'FM00')||':'||to_char(mod(MAX(TXR.REAL_TIME+TXR.DURATION)-MIN(TXR.REAL_TIME),60),'FM00')||':'||to_char(mod(MAX(TXR.REAL_TIME_FRAME+TXR.DURATION_FRAME)-MIN(TXR.REAL_TIME),60),'FM00') "AS RUN DURATION",
TO_CHAR(TRUNC((MIN(TXS.SCHEDULE_TIME) KEEP (DENSE_RANK FIRST ORDER BY TXR.REAL_TIME) )/3600),'FM00')||':'||TO_CHAR(TRUNC(MOD(MIN(TXS.SCHEDULE_TIME) KEEP (DENSE_RANK FIRST ORDER BY TXR.REAL_TIME) ,3600)/60),'FM00')||':'||TO_CHAR(MOD(MIN(TXS.SCHEDULE_TIME) KEEP (DENSE_RANK FIRST ORDER BY TXR.REAL_TIME) ,60),'FM00')||':'||TO_CHAR(MOD(MIN(TXS.SCHEDULE_TIME_FRAME) KEEP (DENSE_RANK FIRST ORDER BY TXR.REAL_TIME) ,60),'FM00') "SCHEDULED TIME",
to_char(trunc((MAX(TXS.SCHEDULE_TIME+TXS.DURATION)-MIN(TXS.SCHEDULE_TIME))/3600),'FM00')||':'||to_char(trunc(mod(MAX(TXS.SCHEDULE_TIME+TXS.DURATION)-MIN(TXS.SCHEDULE_TIME),3600)/60),'FM00')||':'||to_char(mod(MAX(TXS.SCHEDULE_TIME+TXS.DURATION)-MIN(TXS.SCHEDULE_TIME),60),'FM00')||':'||to_char(mod(MAX(TXS.DURATION_FRAME),60),'FM00') "SCHEDULED DURATION"
FROM TX_RECON_INSTANCE_VIEW TXR, TX_SCHEDULE TXS, TX_SCHEDULE_RECON TXREC
WHERE TXR.TX_DATE=20100926 AND TXR.TX_TYPE='P'
AND TXR.TX_ID=TXREC.RECON_TX_ID(+)
AND TXREC.BASE_TX_ID=TXS.TX_ID(+)
GROUP BY TXR.TX_DATE, TXR.ITEM_ID
ORDER BY TXR.TX_DATE, TXR.ITEM_ID, MAX(TXR.REAL_TIME)--does this work for everyone now? let me know...thanks

Need help to redesign legacy SQL Script

Hello Experts,
I have the below code which produces a CREATE TRIGGER statement. as of now this does for updating. I need to re-design this code to add for inserting and deleting as well. I just need help in the structuring wise. I can build the logic for inserting and updating inside. I want to know how i can continue to get for "inserting" and "deleting" as well.
you will understand my question better if you go through main code, present output and required output format below.
I know this is a bad design first of all. but the below code is a legacy one. so i cant change the entire structure of the code :-( all i can do is to continue designing it to add new changes. Hence sought help from you all.
please help
SQL CODE:
WITH audit_tables
AS
   (SELECT object_name,
           MIN (column_id) min_col,
           MAX (column_id) max_col
    FROM   user_objects o,
           user_tab_columns c
    WHERE o.object_name = 'CHR_VAL_DESC_A_T'
    AND    o.object_name = c.table_name
    GROUP BY object_name
SELECT txt
FROM (
SELECT ' CREATE OR REPLACE TRIGGER ' || REPLACE(object_name,'_A_T') || '_ADT_TRG' || CHR(13) ||
       '   AFTER INSERT ' || CHR(13) ||
       '   OR    UPDATE ' || CHR(13) ||
       '   OR    DELETE ' || CHR(13) ||
       '   ON ' || REPLACE(object_name,'_A_T','_T') || CHR(13) ||
       '   FOR EACH ROW ' || CHR(13) ||
       ' DECLARE ' || CHR(13) ||
       ' BEGIN ' || CHR(13) ||
       ' IF updating THEN ' || CHR(13) ||
       '   INSERT INTO ' || object_name || CHR(13) ||
       '   (' txt, object_name, 1 disp_order, 0 column_id
FROM audit_tables
UNION ALL
SELECT txt, object_name, disp_order, column_id
FROM (SELECT
        CASE
          WHEN max_col = column_id THEN
            '    '||column_name
          ELSE
            '    '||column_name || ','
          END AS txt, object_name, 2 disp_order, column_id
      FROM audit_tables t,
            user_tab_columns C
      WHERE c.table_name = t.object_name
      ORDER BY c.column_id ASC)
UNION ALL
SELECT '   )' || CHR(13) ||
       '   VALUES ' || CHR(13) ||
       '   (', object_name, 3 disp_order, 0
FROM audit_tables t
UNION ALL
SELECT txt, object_name, disp_order, column_id
FROM (SELECT
        CASE
          WHEN max_col = column_id THEN
            CASE
              WHEN SUBSTR(column_name,1,2) = 'N_' THEN
                '    :NEW.'||decode(substr(column_name,1,2),'N_',substr(column_name,3))||');'
              WHEN SUBSTR(column_name,1,2) = 'O_' THEN
                '    :OLD.'||decode(substr(column_name,1,2),'O_',substr(column_name,3))||');'
              WHEN min_col = column_id THEN
                '    1'
              WHEN column_id = 2 THEN
                '     ''I'''
              WHEN column_id = 3 THEN
                '    SYSDATE'
              ELSE
              '    :NEW.'||column_name||');'
            END
          ELSE
            CASE
              WHEN SUBSTR(column_name,1,2) = 'N_' THEN
                '    :NEW.'||decode(substr(column_name,1,2),'N_',substr(column_name,3))||','
              WHEN SUBSTR(column_name,1,2) = 'O_' THEN
                '    :OLD.'||decode(substr(column_name,1,2),'O_',substr(column_name,3))||','
              WHEN min_col = column_id THEN
                '    1'||','
              WHEN column_id = 2 THEN
                '    ''I'''||','
              WHEN column_id = 3 THEN
                '    SYSDATE' ||','
              ELSE
                '    :NEW.'||column_name||','
               END
          END AS txt,object_name, 4 disp_order, column_id
      FROM audit_tables t,
           user_tab_columns c
      WHERE c.table_name = t.object_name
      ORDER BY c.column_id ASC)
UNION ALL
SELECT 'END '||REPLACE(object_name,'_A_T') || '_ADT_TRG;' || CHR(13),
       object_name, 5 disp_order, 0
FROM    audit_tables)
ORDER BY object_name, disp_order, column_id
PRESENT OUTPUT:
CREATE OR REPLACE TRIGGER CHR_VAL_DESC_ADT_TRG
   AFTER INSERT
   OR    UPDATE
   OR    DELETE
   ON CHR_VAL_DESC_T
   FOR EACH ROW
DECLARE
BEGIN
IF updating THEN
   INSERT INTO CHR_VAL_DESC_A_T
    TXN_ID,
    TXN_TYP,
    ADT_DTTM,
    CHR_VAL_DESC_ID,
    CHR_VAL_ID,
    LANG_ID,
    DESC_ID,
    O_CHR_VAL_DESC,
    N_CHR_VAL_DESC,
    O_TRANS_STATE,
    N_TRANS_STATE,
    CRTD_BY,
    CRTD_DTTM,
    O_UPD_BY,
    N_UPD_BY,
    O_UPD_DTTM,
    N_UPD_DTTM,
    O_LOCK_NUM,
    N_LOCK_NUM
   VALUES
    1,
    'I',
    SYSDATE,
    :NEW.CHR_VAL_DESC_ID,
    :NEW.CHR_VAL_ID,
    :NEW.LANG_ID,
    :NEW.DESC_ID,
    :OLD.CHR_VAL_DESC,
    :NEW.CHR_VAL_DESC,
    :OLD.TRANS_STATE,
    :NEW.TRANS_STATE,
    :NEW.CRTD_BY,
    :NEW.CRTD_DTTM,
    :OLD.UPD_BY,
    :NEW.UPD_BY,
    :OLD.UPD_DTTM,
    :NEW.UPD_DTTM,
    :OLD.LOCK_NUM,
    :NEW.LOCK_NUM);
END CHR_VAL_DESC_ADT_TRG;
REQUIRED OUTPUT FORMAT:
CREATE OR REPLACE TRIGGER TRIGGER_NAME
   AFTER INSERT
   OR    UPDATE
   OR    DELETE
   ON TABLE_NAME
   FOR EACH ROW
DECLARE
BEGIN
IF updating THEN
   INSERT TABLE_NAME
    list of column names
   VALUES
IF inserting THEN
   INSERT TABLE_NAME
    list of column names
   VALUES
IF deleting THEN
   INSERT TABLE_NAME
    list of column names
   VALUES
END TRIGGER_NAME;

can anyone please help?
i tried adding with inserting and updating also..but when i tried to add deleting part the final output not comes in proper structure.
WITH audit_tables
AS
   (SELECT object_name,
           MIN (column_id) min_col,
           MAX (column_id) max_col
    FROM   user_objects o,
           user_tab_columns c
    WHERE o.object_name IN ('CHR_VAL_DESC_A_T', 'CHR_VAL_A_T')
    AND    o.object_name = c.table_name
    GROUP BY object_name
SELECT txt
FROM (
SELECT ' CREATE OR REPLACE TRIGGER ' || REPLACE(object_name,'_A_T') || '_ADT_TRG' || CHR(13) ||
       '   AFTER INSERT ' || CHR(13) ||
       '   OR    UPDATE ' || CHR(13) ||
       '   OR    DELETE ' || CHR(13) ||
       '   ON ' || REPLACE(object_name,'_A_T','_T') || CHR(13) ||
       '   FOR EACH ROW ' || CHR(13) ||
       ' DECLARE ' || CHR(13) ||
       ' BEGIN ' || CHR(13) ||
       *' IF inserting THEN '* || CHR(13) ||
       '   INSERT INTO ' || object_name || CHR(13) ||
       '   (' txt, object_name, 1 disp_order, 0 column_id
FROM audit_tables
UNION ALL
SELECT txt, object_name, disp_order, column_id
FROM (SELECT
        CASE
          WHEN max_col = column_id THEN
            '    '||column_name
          ELSE
            '    '||column_name || ','
          END AS txt, object_name, 2 disp_order, column_id
      FROM audit_tables t,
            user_tab_columns C
      WHERE c.table_name = t.object_name
      ORDER BY c.column_id ASC)
UNION ALL
SELECT '   )' || CHR(13) ||
       '   VALUES ' || CHR(13) ||
       '   (', object_name, 3 disp_order, 0
FROM audit_tables t
UNION ALL
SELECT txt, object_name, disp_order, column_id
FROM (SELECT
        CASE
          WHEN max_col = column_id THEN
            CASE
              WHEN SUBSTR(column_name,1,2) = 'N_' THEN
                '    :NEW.'||decode(substr(column_name,1,2),'N_',substr(column_name,3))||');'
              WHEN SUBSTR(column_name,1,2) = 'O_' THEN
                '    NULL'||');'
              WHEN min_col = column_id THEN
                '    1'
              WHEN column_id = 2 THEN
                '     ''I'''
              WHEN column_id = 3 THEN
                '    SYSDATE'
              ELSE
              '    :NEW.'||column_name||');'
            END
          ELSE
            CASE
              WHEN SUBSTR(column_name,1,2) = 'N_' THEN
                '    :NEW.'||decode(substr(column_name,1,2),'N_',substr(column_name,3))||','
              WHEN SUBSTR(column_name,1,2) = 'O_' THEN
                '    NULL'||','
              WHEN min_col = column_id THEN
                '    1'||','
              WHEN column_id = 2 THEN
                '    ''I'''||','
              WHEN column_id = 3 THEN
                '    SYSDATE' ||','
              ELSE
                '    :NEW.'||column_name||','
               END
          END AS txt,object_name, 4 disp_order, column_id
      FROM audit_tables t,
           user_tab_columns c
      WHERE c.table_name = t.object_name
      ORDER BY c.column_id ASC)
UNION ALL
SELECT txt, object_name, disp_order, column_id
FROM(SELECT *' ELSIF updating THEN '* || CHR(13) ||
       '   INSERT INTO ' || object_name || CHR(13) ||
       '   (' txt, object_name, 5 disp_order, 0 column_id
FROM audit_tables
UNION ALL
SELECT txt, object_name, disp_order, column_id
FROM (SELECT
        CASE
          WHEN max_col = column_id THEN
            '    '||column_name
          ELSE
            '    '||column_name || ','
          END AS txt, object_name, 6 disp_order, column_id
      FROM audit_tables t,
            user_tab_columns C
      WHERE c.table_name = t.object_name
      ORDER BY c.column_id ASC)
UNION ALL
SELECT '   )' || CHR(13) ||
       '   VALUES ' || CHR(13) ||
       '   (', object_name, 7 disp_order, 0
FROM audit_tables t
UNION ALL
SELECT txt, object_name, disp_order, column_id
FROM (SELECT
        CASE
         WHEN max_col = column_id THEN
            CASE
              WHEN SUBSTR(column_name,1,2) = 'N_' THEN
                '    :NEW.'||decode(substr(column_name,1,2),'N_',substr(column_name,3))||');'
              WHEN SUBSTR(column_name,1,2) = 'O_' THEN
                '    :OLD.'||decode(substr(column_name,1,2),'O_',substr(column_name,3))||');'
              WHEN min_col = column_id THEN
                '    1'
              WHEN column_id = 2 THEN
                '     ''U'''
              WHEN column_id = 3 THEN
                '    SYSDATE'
              ELSE
              '    :NEW.'||column_name||');'
            END
          ELSE
            CASE
              WHEN SUBSTR(column_name,1,2) = 'N_' THEN
                '    :NEW.'||decode(substr(column_name,1,2),'N_',substr(column_name,3))||','
              WHEN SUBSTR(column_name,1,2) = 'O_' THEN
                '    :OLD.'||decode(substr(column_name,1,2),'O_',substr(column_name,3))||','
              WHEN min_col = column_id THEN
                '    1'||','
              WHEN column_id = 2 THEN
                '    ''U'''||','
              WHEN column_id = 3 THEN
                '    SYSDATE' ||','
              ELSE
                '    :NEW.'||column_name||','
            END
          END AS txt,object_name, 8 disp_order, column_id
      FROM audit_tables t,
           user_tab_columns c
      WHERE c.table_name = t.object_name
      ORDER BY c.column_id ASC)
UNION ALL
SELECT 'END IF;' || CHR(13) ||
       'END '||REPLACE(object_name,'_A_T') || '_ADT_TRG;' || CHR(13),
       object_name, 9 disp_order, 0
FROM    audit_tables)
ORDER BY object_name, disp_order, column_id)

URGENT: Content Services using PL/sql utl_http

I'm using Oracle Collaboration Suite Content Services Version 10.1.2.0.0 (Oracle 10g Enterprise Edition Release 10.1.0.4.0).
Using PL/sql, I want to be able to retrieve a html document stored in a folder in Content Services, and store the contents of that document in a table.
I can retrieve and store the contents of the document if it stored anywhere - I just can't when the document resides in Content Services.
Within PL/sql I am authenticating using utl_http.set_authentication, then using utl_http.request_pieces.
I'm not getting an error message, just the "<" character stored in my table.
Can I not use utl_http.request_pieces for retrieving a document in Content Services?
Thanks
Paul

HI Michiel
I am also trying to achieve something similar to that. I am trying to call a web service that sends an xml attachment over MTOM? Kindly, let me know if this was achievable from your end? I mean how did the issue got resolved.
thanks
vijay

Call MTOM web service using pl/sql (utl_http)

Hi All,
Is anyone able to call a MTOM web service using utl_http from pl/sql ?
A typical request looks like this:
--uuid:fd1fbed8-7042-4673-a304-becc1ffb037f+id=1
Content-ID: <http://tempuri.org/0>
Content-Transfer-Encoding: 8bit
Content-Type: application/xop+xml;charset=utf-8;type="text/xml"
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"><s:Body>......</s:Body></s:Envelope>
uuid:fd1fbed8-7042-4673-a304-becc1ffb037f+id=1
A microsoft C# tool is provided to generate some requests and using fiddler I can see the content type is in the header as well as in the request. In the requests it doesn't contain the UID. Connection is set to keep-alive, is that possible using pl/sql ?
The part that builds the header looks like:
l_http_request := UTL_HTTP.begin_request(url => 'http://' || l_host_name || ':' || l_port || '/CRUDService.svc', method => 'POST', http_version => 'HTTP/1.1');
UTL_HTTP.set_header(l_http_request, 'Host', l_host_name || ':' || l_port);
UTL_HTTP.set_header(l_http_request, 'SOAPAction', '"action"');
UTL_HTTP.set_header(l_http_request, 'Content-Length', LENGTH(l_string_request));
UTL_HTTP.set_header(l_http_request, 'Content-ID', '<http://tempuri.org/0>');
UTL_HTTP.set_header(l_http_request, 'Content-Transfer-Encoding', '8bit');
UTL_HTTP.set_header(l_http_request, 'Content-Type', 'multipart/related; type="application/xop+xml";start="<http://tempuri.org/0>";boundary="uuid:fd1fbed8-7042-4673-a304-becc1ffb037f+id=1";start-info="text/xml"');
I've played with the request by adding or removing information, the http response is (400) "Bad Request - Invalid Header", so should be somewhere in the header? Anyone ideas?
Kind regards,
Michiel

HI Michiel
I am also trying to achieve something similar to that. I am trying to call a web service that sends an xml attachment over MTOM? Kindly, let me know if this was achievable from your end? I mean how did the issue got resolved.
thanks
vijay

New User,need help, charging, using, everythi

I recently bought a Zen V Plus and have no tech savy so need help. I've checked with support but don't get th answers I need so thought someone here could help. Here are my questions.
1. Is there anything else that can be used as a charger besides a Zen product. I have several cell phone chargers both for house and can, can any of these be used? need to save money
2. Can the Zen be used while charging? All I get is the docked message and nothing else?
3. I use my player mainly for audio books and the battery doesn't hold for a whole book so I have to charge but when I do the book goes? back to the first part instead of holding my place. I do I hold my place?
Anybody that can give me simple clear answers please help. Because of my age I have trouble reading and the player allows me to enjoy books but I have trouble understanding how to make it work. Don't laugh but my 3 year old grandson would probably have better luck with getting it to work.
Thanks for any help provided

Li'vewolf,
First, no three year old will do better than you can with the player. That said, spend some time reading the tutorials listed under support at the top of this page, and use the search in this forum to find everything you can about the Zen V Plus.
When I shut down my Zen V plus, while reading my current audiobook, I just hit the pause button and then pull down the slide button on the left for "shutting down". Some of my books seem to do better with just a shut down instead of pause first. I have found that the bookmark feature is more trouble than it is worth. I use audiobooks from NetLibrary and Overdri've and a few extra from a forum on audiobooks. It seems that they all work differently when shutting down and holding a place.
Anyway, spend some time trying different methods of bookmarking. The Zen V Plus is fairly forgiving player.
Best Wishes.
luvmyrescuedogs
One more thought for recharging your battery. Try Amazon or eBay for a recharger, if you can't afford the Creative charger, but remember that you can fry the player if you use the wrong one and the warranty doesn't cover that damage. The easiest and cheapest way to recharge is to use the computer.

I need help to use PL/SQL UTL_HTTP package

Similar Messages

Maybe you are looking for