I need help with creating a partition with bootcamp. I run OSX Lion and want to also run Windows 7.
Bootcamp is not allowing me to create the partition. The message i get when i try to do so is as follows:
The disk cannot be partitioned because some files cannot be moved.
Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again.
I am looking in Disc Utility and am not sure what to do.
To me it looks like i only have one 'single Mac OS Extended (Journaled) volume. So i am not sure exactly what it is requiring me to do?
Help greatly appreciated!
Look to the right under "More Like This". Your issue has been discussed many many times. The error you are seeing is because you do not have enough free "contiguous" space on your hard drive. Read the other threads that address this issue to find how to solve the issue.
Or, put "The disk cannot be partitioned because some files cannot be moved" into the search box at the upper right of this page.
Similar Messages
-
when printing from aperture my margins are unequal, even if i set my margins they come out bigger one side and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000.
please can anbody help or advise?You didn't mention any color calibration being done on your monitor. This is an essential part of any color-correct workflow. What are you using to calibrate your monitor (and your printer)?
Print profiles (for soft-proofing as well as printing) are for specific combinations of paper & printer. The nine you have are each, most likely, for a common paper (perhaps mfr'd by Canon) to be used with your printer.
I don't know what you mean when you say "I choose a high standard print option".
Have you read the User Manual chapter on printing?
Printing Your Images
There is also a good appendix on calibration:
Calibrating Your Aperture System -
Need help in creating a view with Encryption for hiding the code used by the multiple users
Hi,
Can anyone help me out in creating view with encryption data to hide the stored procedure logic with other users.
I have create a stored procedure with encryted view but while running this manually temporary views are getting created, therefore the problem is if there are 500 entries then 500 temp views will get created.
Any solution to aviod creating temporary views, please refer my code below
USE [etl_validation]
GO
/****** Object: StoredProcedure [dbo].[Pr_DBAccess_mod] Script Date: 05/23/2014 12:53:22 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[Pr_DBAccess_mod](@ETL_CONFIG_ID INT)
AS
BEGIN
DECLARE @openquery NVARCHAR(MAX),
@DATABASENAME NVARCHAR(100),
@HIERNAME NVARCHAR(100),
@TABLENAME NVARCHAR(100),
@SERVERTYPE NVARCHAR(100),
@SERVERNAME NVARCHAR(100),
@USERNAME NVARCHAR(100),
@PASSWORD NVARCHAR(100),
@ETL_CONFIG_IDN NVARCHAR(100);
SET @ETL_CONFIG_IDN=CAST(@ETL_CONFIG_ID AS NVARCHAR);
SET @TABLENAME='Department';
SET @SERVERTYPE='SQL';
SET @SERVERNAME ='192.168.31.176';
SET @DATABASENAME='AdventureWorks2008R2';
SET @HIERNAME = 'HumanResources';
IF @SERVERTYPE='SQL'
BEGIN
/*SET @openquery= 'SELECT * INTO ##TestTable
FROM OPENROWSET(''SQLNCLI'',''server=192.168.31.176;Trusted_Connection=yes;'','''+@query+''')'
SET @openquery= 'CREATE VIEW '+@TABLENAME+@ETL_CONFIG_IDN+
' WITH ENCRYPTION AS SELECT * FROM OPENROWSET(''SQLNCLI'',''SERVER='+@SERVERNAME+';TRUSTED_CONNECTION=YES;'',''SELECT * FROM '+@DATABASENAME+'.'+@HIERNAME+'.'+@TABLENAME+''')'
SELECT @openquery
END
EXECUTE sp_executesql @openquery
ENDHi aa_rif,
According to your description and code message, you execute the sp_executesql statement in your stored procedure, it indeed create many views with a tablename and ETL_CONFIG_ID named. If you need not to use these temporary views, you can delete them when
it contains the tablename in one view name.
In addition, if you want to create view with encryption in SQL Server, you can use directly the ENCRYPTION option to encrypt the T-SQL of a view in create view commands, for more information, see:
http://learnsqlserver.in/4/Create-View-With-Encryption.aspx. if not, you can descript more detail about requriements, so that more forum members can involve into the thread and help you
out.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
Need help in Creating DB manually with OFA
Hi,
I want to create database in 10g manually and for this purpose
I need help.
since we can use OFA for storing Control files, and redolog file
and datafile by describing them in Create database command but
how to store any instance related file like spfile, pfile or network
related file.
once the oracle 10g database software is installed then if we want
to create database then how can we separate the database file and
all other instance files from software binaries because I've noted
that creating database with DBCA create all instance files along with
binary files of the software although DBCA give you option of creating
database related file in some other location/directory.
kindly help me in this I want to achieve above task in compliance with
OFA
Thanks and Regards,
D.AbbasiAbbasi wrote:
Hi,
I want to create database in 10g manually and for this purpose
I need help.
since we can use OFA for storing Control files, and redolog file
and datafile by describing them in Create database command but
how to store any instance related file like spfile, pfile or network
related file.
once the oracle 10g database software is installed then if we want
to create database then how can we separate the database file and
all other instance files from software binaries because I've noted
that creating database with DBCA create all instance files along with
binary files of the software although DBCA give you option of creating
database related file in some other location/directory.
kindly help me in this I want to achieve above task in compliance with
OFA
Thanks and Regards,
D.AbbasiTHe OFA spec (as best I recall) states that one of the levels of directory for all of your data files will be the db name. So if you name your database 'orcl', every file system in which you keep any files related to 'orcl' will be in a directory name 'orcl'.
As for what happend when you created your db. Oracle will default to putting things in the Oracle home structure because that's the only thing he can guarantee will be there. But you had the option (indeed, the obligation) to override these defaults.
BTW, when using dbca, if you chose any of the pre-canned database types, the database will be created by doing a restore from a pre-canned backup. If you chose 'custom' database, the database will be created by way of a CREATE DATABASE script. It would be instructive time well spent for you to go through dbca and select 'custom database', pay attention to all of the options as you work through, then at then end, deselect "create database" and select "generate scripts". Do the same for one of the pre-defined database types. Then study the scripts generated by each method.
Edited by: EdStevens on Aug 16, 2009 8:46 PM -
Need help on creating a button with additional drop down menu
Hi,
I need to have a button with additional menu as we see in IE, please help me how can i do that. I want the button to be displayed normally with an additional arrow on the right side when clicked on it shows pop up menu. Please let me know if the solution has already there in the forum. I searched and couldn't get one .. :(Hey there buddy.
Try this:
http://www.koders.com/java/fid20361AB8C305DE9B9110DE90F2154FC43AA0E57C.aspx
Jason. -
Hi this has become a big problem for me. iWork doesn't work eaither. Please hel me to solve this proble. Thank you.
Sounds like a Windows installer. Does it say Mac on the disk? When you open the dmg, does it say Office:Mac?
-
Hi everyone,
i'm fairly new to RAID scene and i need help for creating RAID 5 with 8 disk's.
I have HP ProLiant DL380 G6 with 8 disk's, each 500 GB.
i'm trying to create RAID 5 and to have one spare disk. I have made array from 7 disk and then create logical drive.
the last disk (8-th) i used as spare.
up to now i think i'm ok???
what confuse me is:
7 HDD X 500GB= 3500GB
after creating array i get 3200 GB, where i lose 300 GB??
after creating logical drive i get 2700 GB, where i lose 500 GB???
from 2700GB i give 150GB for system partition and for data storage i have only 2550 GB.
Why i lose 800GB??
Can someone explain me how RAID 5 works, do i create it correctly and why i lose so much space???
Is there other way to create RAID 5 without losing so much space?
Thanks you in advnce.The first 'loss' you encounter (300MB) is due to megabyte counting/rounding. A 500GB disk contains about 500.000.000 bytes. This quite a bit less than if counted properly using binary. you loose about 24288000 bytes per disk this way!
http://en.wikipedia.org/wiki/Mibibyte |
http://en.wikipedia.org/wiki/Megabyte
the second loss is due to how raid works.in raid 5 data is written to multiple disks to improve reliability. the simplies t form uses 3 disks: a write will cause half of the data to be written to disk 1, half to disk 2 and the XOR of both datahalfs to disk
3. In this scenario you will loose 33% of storage space and you can loose up to one of 3 disks.
By adding more disks, data can be spread more and the ratio available/raw will increase, or you can write aditionnal crc data and increase resliency for failures.
http://en.wikipedia.org/wiki/RAID
To check the exact algoritmes using on you RAID adapter, I would recommend contacting the vendor (or checking their support site) From your numbres, I do not think you will be able to configure RAID 5 on the same disks and having more available
space for your data.
MCP/MCSA/MCTS/MCITP -
Need help to create report with jpeg/gif image
Hello,
I need help with creating a form with a special jpeg/gif seal. I never done this Java. Until now, I created all forms with ansi C++ with HP escape characters to draw lines, boxs, and text. This form will contain boxes which is populated with database information read from a text file.
Since this form contains a special seal on the upper right, I don't think it can be done with old fashion ansi C++. How can I create a form with Java and create it as a simple exe to just print the form to a specified printer.
Thanks,
JohnHi,
I am creating a form with boxes (lines and text). What is special about this form is that it has an image jpeg or gif at the top right corner. Is is a state department seal. Up to this form, I had used ansi C++ and print out escape HP character to print out the lines, boxes, and text. I have no idea how to print out the image. I am new to JAVA and only 1 class in it. Is there sample code out there to create this type of form with the image? I need a starting point.
Thanks,
John -
Need Urgent help, I have made partition hard drive in my mac book and using OS mac
Need Urgent help, I have made partition hard drive in my mac book and using OS mac & Window8 seperately... for couple of days it works great for both window & OS mac But nowadays, my pc gets restart automatically while using window & even I cant access to my Mac OS........... I got some error in window (error80070003) ...>>>>> Now how can I format whole drive & recover my Mac book OS.without boot disk.
I can't find that model. If you open System Profiler in the Utilities folder look for the Model Identifier over in the right hand display. What do you find for the model ID? If your computer supports Internet Recovery here's what to do:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer. If Mavericks is not installed, then you can reinstall it by re-downloading the Mavericks installer.
You will need to use Boot Camp Assistant in order to create a new Windows partition, then reinstall Windows. -
Need Help to create new screen for RF Sapconsole
Hi Guru's
I'm new on RF (but some years in ABAP) since last week.
I need help to create new screens for RF (SAPLLMOB).
Can someone explain me the procedure to create screen (with ABAP code after) or perhaps someone have an exemple (simple or not) ?
I have to develop 2 new screens with really few time.
And, another subsidiary question :
how SAP can transfert information between the flash gun and the screen i have developped.
Is there some code to add to enable this functionality or it is include in SAPLLMOB on standard fields ????
It's a new strange world for me today...
Many thanks to everyone who can explain me
Alainhi,
I am facing this problem as well. Is there any reference to create the new screen?
Hope someone can help! Thanks!
Regards,
Darren -
Need help in creating a chart from 3 datasets
Need help in creating a chart in SSRS from 3 datasets
Can someone help me in creating a chart from 3 datasets, however datasource is same.Thank you Olaf...
could anyone help me in using union all with the below
WITH a AS (
SELECT
clientid,
DATEPART(year, row_date) AS 'Year',
DATEPART(month, row_date) AS 'Month',
value ,
CASE metricid WHEN 16 THEN 'FCR' ELSE 'Cases' END AS metric
FROM XXXXXX AS V
WHERE metricid IN (16, 11)
AND row_date BETWEEN '2012-01-01' AND '2014-10-01'
AND value IS NOT NULL)
, b AS (
SELECT clientid ,
Year ,
Month ,
value AS 'Cases',
metric
FROM a
WHERE metric = 'cases')
, c AS (
SELECT clientid ,
Year ,
Month ,
value AS 'FCR',
metric
FROM a
WHERE metric = 'FCR')
, d AS (
SELECT b.YEAR, b.MONTH, c.FCR, b.Cases
FROM b INNER JOIN c
ON c.clientid = b.clientid
AND c.[YEAR] = b.[year]
AND c.[month] = b.[month]
WHERE c.fcr <> 0 AND b.cases <> 0
,E AS (
SELECT [Year], [Month], SUM(FCR) AS FCR, SUM(Cases) AS Cases
FROM d
GROUP BY [Year], [Month])
select YEAR, MONTH,
CASE MONTH
WHEN 1 THEN 'Jan'
WHEN 2 THEN 'Feb'
WHEN 3 THEN 'Mar'
WHEN 4 THEN 'Apr'
WHEN 5 THEN 'May'
WHEN 6 THEN 'Jun'
WHEN 7 THEN 'Jul'
WHEN 8 THEN 'Aug'
WHEN 9 THEN 'Sep'
WHEN 10 THEN 'Oct'
WHEN 11 THEN 'Nov'
WHEN 12 THEN 'Dec'
END AS MonthName
,e.FCR AS FCRCases
,e.Cases AS TotalCases
,CASE
WHEN [month] IN (11, 12, 1) THEN 1
WHEN [month] IN (2, 3, 4) THEN 2
WHEN [month] IN (5, 6, 7) THEN 3
WHEN [month] IN (8, 9, 10) THEN 4
END AS 'Quarter'
--,CONVERT(DECIMAL(18, 2),(e.FCR/e.Cases)*100) AS FCRRaw
from e
order by YEAR, MONTH
**************2nd query*************
WITH a AS (
SELECT
clientid,
DATEPART(year, row_date) AS 'Year',
DATEPART(month, row_date) AS 'Month',
value,
CASE metricid WHEN 56 THEN 'numerator' ELSE 'denominator' END AS metric
FROM XXXXXXX.[Values] AS V
WHERE metricid IN (56, 10)
--WHERE metricid IN (11,16)
AND row_date BETWEEN '2013-10-01' AND '2014-02-01'
AND value IS NOT NULL)
, b AS (
SELECT clientid ,
Year ,
Month ,
value AS 'numerator',
metric
FROM a
WHERE metric = 'numerator')
, c AS (
SELECT clientid ,
Year ,
Month ,
value AS 'denominator',
metric
FROM a
WHERE metric = 'denominator')
, d AS (
SELECT b.YEAR, b.MONTH, c.denominator, b.numerator
FROM b INNER JOIN c
ON c.clientid = b.clientid
AND c.[YEAR] = b.[year]
AND c.[month] = b.[month]
WHERE c.denominator <> 0 AND b.numerator <> 0
, e AS (
SELECT [Year], [Month], SUM(numerator) AS numerator, SUM(denominator) AS denominator
FROM d
GROUP BY [Year], [Month]
SELECT *,
CASE
WHEN [month] IN (11, 12, 1) THEN 1
WHEN [month] IN (2, 3, 4) THEN 2
WHEN [month] IN (5, 6, 7) THEN 3
WHEN [month] IN (8, 9, 10) THEN 4
END AS 'Quarter'
FROM e
ORDER BY 1,2
******************3rd query**************
WITH a AS (
SELECT --L.[LocationGroupId],
-- T.locationid,
-- T.AccountId,
TR.datestamp,
/*Convert(NVARCHAR, DatePArt(year, TR.datestamp)) + '-' + Convert(NVARCHAR, DatePArt(month, TR.datestamp)) + '-01'*/
TR.Period AS ValueDate,
CASE WHEN TR.TargetResultState = 0 THEN 0 WHEN TR.TargetResultState = 1 THEN 1 WHEN TR.TargetResultState = 2 THEN 1 ELSE 0 END AS Met,
CASE WHEN CONVERT(DATE, Convert(NVARCHAR, DatePArt(year, TR.datestamp)) + '-' + Convert(NVARCHAR, DatePArt(month, TR.datestamp)) + '-01') > T.Startdate AND CONVERT(DATE, Convert(NVARCHAR, DatePArt(year, TR.datestamp))
+ '-' + Convert(NVARCHAR, DatePArt(month, TR.datestamp)) + '-01') < T.Enddate THEN 1 ELSE 0 END AS ActiveTarget
FROM XXXXXX AS TR
INNER JOIN dbo.Target T ON TR.TargetID = T.ID
--INNER JOIN dbo.Location L ON T.Locationid = L.Id
WHERE --locationid <> - 1 AND
TR.Period IN ('201306', '201307', '201308', '201309', '201310', '201311', '201312', '201401'))
select ValueDate, SUM(Met) AS Met, Count(ActiveTarget) AS ActiveTargets,
right(ValueDate,2) as Month
,left(ValueDate,4) as Year
,CASE
WHEN right(ValueDate,2) IN (11, 12, 1) THEN 1
WHEN right(ValueDate,2) IN (2, 3, 4) THEN 2
WHEN right(ValueDate,2) IN (5, 6, 7) THEN 3
WHEN right(ValueDate,2) IN (8, 9, 10) THEN 4
END AS 'Quarter'
from a
group by ValueDate
order by ValueDate -
Need help in creating multiple signature forms?
need help in creating multiple signature forms that can be digitally signed in adobe reader
Automator gets a bit unweildy when trying to vary things outside of what the actions provide. Since you are already using an AppeScript in your workflow, might as well do the whole thing:
set baseFolder to (path to desktop) -- the location to create the folder
display dialog "Please provide a new folder name:" default answer "test"
set folderName to text returned of the result
repeat -- keep repeating until a number is returned
display dialog "How many subfolders?" default answer "5"
set theNumber to text returned of the result
try -- test the result
set theNumber to theNumber as integer
exit repeat -- success
end try
end repeat
tell application "Finder"
try -- make new folder
set newFolder to (make new folder at baseFolder with properties {name:folderName})
on error number -48 -- skip errors if the folder is already there
set newFolder to ((baseFolder as text) & folderName) as alias
end try
repeat with X from 1 to theNumber
try -- make new subfolder
make new folder at newFolder with properties {name:folderName & X}
on error number -48 -- skip errors if the folder is already there
end try
end repeat
end tell -
My old computer (a Sony) with my iTunes crashed. I have a new MAC and want to make sure I can keep all of my music (mostly from old CD's that have been lost). I bought iTunes match hoping that would work but it isn't using the data on my phone. HELP!
Since you have purchased a new Mac (which, BTW, is not typed in all capitals) why not buy a Time Capsule <http://www.apple.com/airport-time-capsule/> which is designed specifically to work with OS X and Time Machine?
You don't say what part of your Sony "crashed." If it was not the HDD it is possible to take the computer apart, put the HDD in an external case, then recover the data off of it (including the music) simply drag-n-drop. If it was the HDD that "crashed" that makes it more difficult.
If you are able to recover the music from the Sony you can then add it to the iTunes library on the Mac and iTunes Match will then scan, match and upload the tracks to be mirrored in the cloud. -
Need help in creating Buttons in ADF10g
Hi,
My questions are:
1. Is it possible to modify the width of row in ADF10g. Because the width of rows in my output are high. So I want to reduce it.
2. I need help in creating a new 'createbutton' to create a newlist for the table . for this I have used create button but didnot succed.
3. I also need help in creating 'save button' to save modified data into the table.
4. I need help in creating a select-one-choice and select-one-list for columns of table.
Please help me.
regards,
sanjana
sanjanathe Easy Tabs could be useful for your requirement
http://usermanagedsolutions.com/SharePoint-User-Toolkit/Pages/Easy-Tabs-v5.aspx
/blog
twttr @esjord -
Need help in creating tabbed webpart in sharepoint + no of tabs in webpart should be dynamic.
Need help in creating tabbed webpart in sharepoint and no of tabs in webpart should be dynamic.
under each tab i should be able to add multiple webparts(each tab will have webpart zone)
programatically i need to generate tabs and insert webpart zones under each tab.
Let me know how can i achieve this.
i followed below article.
http://msdn.microsoft.com/en-us/library/jj573263%28v=office.14%29.aspx
but in this article the tabs and webparts are static and we need to close each webpart .
Kindly let me know the approach.thanks in advancethe Easy Tabs could be useful for your requirement
http://usermanagedsolutions.com/SharePoint-User-Toolkit/Pages/Easy-Tabs-v5.aspx
/blog
twttr @esjord
Maybe you are looking for
-
I had a bunch of songs from my itunes on my older laptop, and it was no problem to get the songs on my iPod. Now with my mac, I am facing too much problems with getting all my music to my ipod from my itunes. I lost all my songs, and the recent ones
-
I just got a new iPod touch 4th generation and the latest iOS update (4.3.3) isnt installing
It says the software version is 4.2.1 amd that it's downloaded the iOS 4.3.3 version, but when I hit the update button it does the "extracting" bit and then when it gets to the "verifying update with Apple" it says The iPod "Tanuj's iPod" could not b
-
Sammlung in Adobe Bridge geht nicht.
Hallo, ich kann keine Sammlung in Adobe Bridge erstellen. Wenn ich auf den Button klicke um eine neue Sammlung hinzuzufügen passiert nichts. Was kann ich tun? Neuinstallation hat auch nicht funktioniert.
-
When i open up my itunes it wont let me press anything
When I open up my iTunes, it won't let me press anything. Whenever I click on something, it does a little ding and doesn't do anything.
-
How to keep DLV status orders cost not to settle
How to keep the dollars associated with production orders at DLV status in WIP and not let them settle to the P&L like orders at TECO status do