I Need to build a database/booking and dispatch system that intergrates with iCal, Address Book and all Apple device's What would be the best Way.
Hi
Can anyone give me some useful information on the best ways to design and build a database/booking & dispatch system that can be intergrated through ical, address book and available on my macbook, ipad & iphone and all accessed through icloud.
I started my own chauffuer Service a year ago as an independent. it's becoming a massive bore that most of my time is spent taking down information, checking if i am available for clients and with alot of diary checking and repeatative entries and email ping pong and invoicing, what i want to do is concerntrate on advertising and marketing and using my time off for R & R
What i would like to do is access my information in an app and automate most of the processes like
assigning the job to the client with intergration through iCal and Address Book
be able to email confirmation through mail with an invoice produced through numbers or excel
payment is already done through payleven mobile and must be done in person so i'd rather keep that seperate to all processes apart from a tick box to say it has been paid for.
I have been looking at all options FileMaker, Bento, Automator, Apple Script. to be frank im no expert and am a little confused as to what to do any advice would be greatly recieved.
Hi,
I would suggest that is going to be an involved and complex process.
I would personally look into some of the invoicing and time scheduling software available and see if any fit your needs.
Take a look here: http://www.tuaw.com/2008/07/30/app-roundup-timekeeping-and-billing/
and here: http://www.tuaw.com/2008/07/31/app-roundup-timekeeping-and-billing-part-ii-the-q uickening/
for starters.
Best wishes
John M
Similar Messages
-
I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.
From what I read, I have 2 choices: 1. to install OSX and then upgrade to Mavericks, but I'm not sure if this would be possible (to upgrade directly from OSX to Mavericks); and 2. to use a software called Super Duper.
I wouldn't like to have to use a third party software to do this, so the question is: is there a better way to install directly the Mavericks not having to use a third party software?Install the new drive in the computer.
Install the old drive in an external USB or Firewire enclosure.
Boot the computer from the Recovery HD on the external drive.
Use Disk Utility to partition and format the new internal drive.
Clone your external drive to the internal drive.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the Recovery HD on the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your new hard drive (this is the entry with the
mfgr.'s ID and size) from the left side list. Note the SMART status of
the drive in DU's status area. If it does not say "Verified" then the drive
is failing or has failed and will need replacing. Otherwise, click on the
Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
the drop down menu to one. Set the format type to Mac OS Extended
(Journaled.) Click on the Options button, set the partition scheme to
GUID then click on the OK button. Click on the Partition button and
wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
drive entry) from the left side list. Click on the Erase tab in the DU main
window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
Options button, check the button for Zero Data and click on OK to
return to the Erase window.
6. Click on the Erase button. The format process can take up to several
hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Using Disk Utility still opened.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
Destination entry field.
6. Select the source volume from the left side list and drag it to the
Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer. -
My wife has gave me her old ipad what would be the best way to set up her new ipad and to have my own ID?
Backup the old iPad first, either to itunes or iCloud.
Once that is done, setup the new iPad from the backup. Choose the Restore from Backup option when setting up the new iPad.
iOS: How to back up / Restore
http://support.apple.com/kb/ht1766
When that is done, wipe the old iPad clean and set up as new.
Settings->General->Reset->Erase all Content and Settings
You can create a new Apple Id when you set up the iPad again. -
I HAVE A MAC POWERBOOK G4 AND WOULD LIKE TO TRANSFER MY FILES, PHOTOS AND VIDS TO MY NEW MAC PRO, WHAT WOULD BE THE BEST METHOD?? THANKS ROB
I think the easiest way is to use a firewire cable (you will need on like this: http://www.google.com/products/catalog?q=Firewire+400+to+800+cable&oe=utf-8&rls= org.mozilla:en-US:official&client=firefox-a&um=1&ie=UTF-8&tbm=shop&cid=120962573 04625337030&sa=X&ei=PytQT9r4NtOBsgL9s_C6Dg&ved=0CHYQ8gIwAA).
Power up the Power Mac G4 and hold the "T" key while it is booting (this puts the G4 notebook in Firewire Target Disk mode). Connect the G4 notebook to the newer MacBook Pro and use the Migration assistant (/Applications/Utilities) OR browse through the files and copy what you want. -
I would like to place all my content in one location and share and move it as needed to my various apple devices. What's the best way to do it?
Hi,
I would suggest that is going to be an involved and complex process.
I would personally look into some of the invoicing and time scheduling software available and see if any fit your needs.
Take a look here: http://www.tuaw.com/2008/07/30/app-roundup-timekeeping-and-billing/
and here: http://www.tuaw.com/2008/07/31/app-roundup-timekeeping-and-billing-part-ii-the-q uickening/
for starters.
Best wishes
John M -
I've replaced my 10.5.8 with another machine 10.6.8 which as we know doesn't support Apple Talk which has been used to print to 2 bulletproof older printers and an imagesetter. I wan't to keep using the printers and can use the 10.5.8 as a server. What is the best way to do this?
Hi
You could do this a number of ways. Using the LPD Daemon might work best for your location?
First: assign the machine you're going to use as the 10.5.8 'server' a fixed IP address.
Second: add desired printers to that machine using the usual methods.
Once added share them using the Print Sharing option in the Sharing Preferences Pane. On the 10.6.8 machine add the printer using the IP address of the 10.5.8 'server'.
System Preferences > Print & Fax and click the '+' icon. Click on the IP Icon and key in the IP address you previously assigned. Leave the Queue field alone and select the relevant PPD from the Print Using field (see below). You'll have to search for these yourself.
You don't have to 'install' the PPDs on the 10.6.8 machine as such. Simply copying them over from their location on the 10.5.8 machine (use a memory stick to do the transfer) to the same location on the 10.6.8 machine will be enough.
There should be no need to restart.
HTH?
Tony -
I'm trying to move a table from a MS Access database to a datasource online so I don't have to be the only one that can perform a specific task.
Right now I regularly am having to assess change requests to determine if it impacts the servers my team supports. Currently I copy and paste the text list into a temporary table in MS Access then hit a button to run a query comparing what was in that list to my server inventory. Works fine but now I need to move this online so others can do this in a place where we can also keep everyone using the exact same inventory and am planning on using a ColdFusion server.
So what I believe would be easiest is to create a form that has a textarea where I can just copy and paste what is in the change request and then hit a submit button and go to the next page where it would list all the servers that matched (with all the other info I also need).
Almost always the info would hit the textarea with a separate row for each server with no other delimiters, etc.
Example info in textarea:
servername1
servername2
servername3
What is the best/easiest way in the SQL code on the following page to take the values from the textarea the way they are listed and return results of any that match the server name column from that list? What CF functions and SQL coding are needed?
I've done something in the past where I did WHERE Server IN (#PreserveSingleQuotes(Form.ServerList)#)...
But I had to input 'servername1', 'servername2', 'servername3' in the text box and with how often we'll be copying lists as show above from a text area or from an excel column I'd really like a way to get from the example above to the results I need without having to manipulate. Sometimes the list I'm comparing against may be 300+ servers and adding that formatting is not desirable.
Any help would be appreciated.So here is a solution I came up with
<cfoutput>
<cfset Servers="#StripCR(Form.ServerList)#">
<cfset Servers2="'#Replace(Servers, "
", " ", "All")#'">
<cfset Servers3="#ToString(Servers2)#">
<cfset Servers4="#Replace(Servers3, " ", "', '", "All")#">
</cfoutput>
Then in the cfquery SQL I used
WHERE Server IN (#PreserveSingleQuotes(Servers4)#)
Right now this is working but it seems very cumbersome. If anyone can come up with a way to simplify this please let me know. -
I have been doing lots of work on final cut and want to know how some of you maybe starded doing work for others to make $
.. just to add my 5¢:
There're several ways to moneytize your editing skills.
● freelance editor:
Indeed, then first question of any client is "What apps do you handle?" I dare to say, depending in what area you live, those huge fabs searching for freelancers use very little FCPX; here, they're looking for Avid, GVproducts, maybe FC/pro...
● one-man-slaughter-houses aka Wedding-photographer
If your skills are beyond editing-only, and you're an (excellent) DoP, for sure offering your 'products' is the obvious; Weddings, Bar Mizwahs, Funerals, Services, lectures, workshops, company image movies, demoes, exhibit videos... But, as other mentioned: nobody is intersted with what tools you create the film; only results count; in private products, lots of 'eye-candy' gives a happy bunny customer
● 'Yellow Pages': I'll make you a movie...
I'm not doing that professional, but occasionally for money: people ask me, to grab a harddrive full of 'files' to create 'a nice movie', lately two 'flat' birthdays (30/40), tons of pics, shakey iPhone messages, music, dissolves, done. - nothing for living...
● Teaching?
teach other your skills, have a look here http://training.apple.com/act
Hurdle to go for all those: hen-egg-dillema
People want to see your skills in advance; but without jobs, nothing to see yet. -
I recently purchased a Mac Book Air and wanted to know what would be the best external hard drive to buy as far as the brand and GB or TB are concerned? I will basically just be storing music, papers, and a lot of pictures. Also, how should I go about charging my computer? Should I wait until it is close to dying and then charge it?
I have had good success with HGST and Seagate HDDs. I suggest a HDD that is powered by the MBA eliminating the need for an AC cord. They now come up to 1.5 TB in capacity. In my opinion, one cannot have too much storage. If necessary, let your bank account be your guide.
Ciao. -
Entourage Sync with iCal & Address Book - Fixed!
Finally found a solution that really works.
Background
I had the infamous issue of trying to get Entourage Calendar and Contacts to Sync with iCal & Address book for the purpose of syncing with iTunes on my iPhone.
I've had most of the symptoms listed on this site.
It only syncs one way, Entourage Calendar shows up in iCal, but it's blank, Entourage Calendar does not show up at all in iCal, but contacts show up in Address book.
I've read nearly every post about it and tried all the various fixes listed, but none of them worked, or at least not consistently.
My setup:
OS X 10.5.5 MacBook Pro (latest updates)
Entourage 2004 (latest patches)
(If your using Mobile me, log out before you do this)
Here's what you'll need to do:
1. Backup your Main Identity which contains all your entourage info, email, contacts, calendars, etc. (Just in case you goof something up)
It's located in your home user account ~User/youraccount/documents/Microsoft User Data (Backup this whole folder)
If you don't know all your email credentials such as username, password, smtp, pop info, jott it down as it will save you some time later.
2. Launch Entourage and uncheck the Sync Services. Quit Entourage and all Office Apps.
Also you should archive all your entourage data if you want to copy it to the new setup.
Archive the contacts and Calendar Events separately.
3. Launch iCal and manually delete the Entourage Calendar (if present) Quit iCal.
4. Now open your documents folder and locate the folder named Microsoft User Data and rename the folder to Microsoft User Data Original
5. Create a new OS X User from the System Preferences... Accounts
6. Logoff your current user account and login to your new user account.
7. Launch Entourage and enter your email info.
8. Now create a single calendar event.
9. Go to Entourage Preferences, and check the Sync Services. (click OK, etc.)
10. Wait 5 minutes, then launch iCal and you will see the Entourage Calendar with your single event.
You should also see your contact that was created when you setup email in the Address Book.
If this worked you've isolated the syncing problem to a corrupt file in your user account or corrupt data in your entourage account.
You can go back to your original user account and delete all the info from entourage to see if you had corrupt data in entourage, (youd did back it up first, right?) or you can follow the procedures below to move all your stuff over to the new login account.
Now you'll need to migrate your data from your Old login account to your new login account.
(I've tried just moving the new Entourage identity back to the old account, and it didn't always work)
The easiest way to move data between accounts is to login as root.
To enable the root user, Go to Utilities, Directory Utility, and under the edit menu, select enable root user, enter a unique password, later you can disable root login when your all done)
Logout of your new login and login as root with the new password you just created
When it prompts for a username type "root". If you don't have that option click the Other login and then type in root as the username and the new password.
Once your logged in as root, be careful as you can pretty much trash anything without any warnings.
Now Open your original user folder located in ~User/youraccount as well as the new user you just created
(not the root account)
Open the folders side by side and drag the contents from old to new:
Desktop
Documents
iTunes
Movies
Music
plus any other info you need.
Log back into your new user account, and run a repair permissions from disk utility.
Launch Entourage and enter a new event and contact. Then wait a few minutes and verify that it made it over to iCal & Address book.
If it did, and it should have, you can then import your entourage archives, do contacts first, then wait a few minutes and verify it shows up in Address Book, then do your Calendar events and verify.
When everything is syncing between entourage and iCal/Address Book you can connect your iPhone and enable syncing.
A few important notes:
-If you have Years worth of Calendar Items in entourage, you will most likely run into problems, so archive your old Events and only restore that which you need.
-You may also need to retrieve old application preferences.
-Once your sure you've got everything, you can delete the Microsoft User Data Original folder that we renamed and put in your Documents Folder.
Hope this helps somebody out.
LJSEntourage calendar does not sync as you are expecting, with iCal.
Turn your Entourage sync services on (to sync your calendar) and you will notice in iCal a new calendar on the left, called Entourage. Mind has a purple color to it, for example.
Now, in iCal, create a new appointment and assign it TO the Entourage calendar. Now sync, and hey presto it shows up in Entourage.
This is by design, Entourage does not sync ALL of your iCal calendars, it will only sync the Entourage calendar which is created in iCal.
For example, I have Home, Work, Personal and Entourage calendars in iCal - appointments I make with my Home, Work or Personal calendar will not appear in Entourage, period. Only appointments made in iCal using the Entourage calendar will appear in Entourage (after a sync).
Likewise, appointments made IN Entourage Calendar, are sync'd to iCal and are only visible if you show the Entourage calendar in iCal - (it's switched ON by default, but can be switched off by un-ticking the calendar in the left pane of iCal).
Does this make sense? -
What's is the best way to use iPhoto? I need to understand.
What's is the best way to use iPhoto? I need to understand.
I guess the iPhoto is only for people with 5,000 of personal photos.
Or even 200,000, but they can't use this app everyday.
I'm not talk about working as a photographer. They use Aperture.
They may use iPhoto like a family album that you take a look sometimes.
And don't care about putting photos from the camera or from internet everyday.
I have tons of music and I love iTunes 8, works great. So I tried but I can't stand iPhoto anymore.
I have over 173,000 photos. My goal is organize, have total control, crop in Preview and delete them fast as I can.
The iPhoto is too slow. And is not only about performance, more RAM... but the whole concept.
Finder is much better/richer/flexible to organize than iPhoto.
I'm not talking about the photographer workflow.
And I'm not talking about editing and all these great photo features, the search, and all the iLife environment. They are amazing.
When I'm iPhoto, I feel like a prisioner.
I can't open an album/folder/event alone just to take a look, without do lanch the iPhoto app with the all thousand photos together. And it's slow.
I can't use Quick Look there.
So, I'll use Finder for manage/crop/etc. But what's the best way to use iPhoto in my case? Put the best/key ones there to use in iLife/MobileMe? To do a more serious editing? I like the features: keywords/ratings/hidden photos/events... It would be cool this features in Finder.
For example:
iMovie: Manage movies? NO. It's editng only.
iTunes: Manage music/small video/podcast...? OK. Editing the song? OK for tags/convert/artwork/equalizer... For music there's a GarageBand of course.
iPhoto: Manage photos? Yes and No.
I think Finder would kill iPhoto incoporating all the editing features in Preview and the rich manage in Finder.
Jobs said that no one care about iDVD anymore. They care about the web.
Using iMovie to export to MobileMe.
Maybe iPhoto become less important in a near future. With a better Finder+Preview Right?
Sorry for this long text with a short question.
Thanks.Your post demonstrates exactly why I keep saying that iPhoto is not the application for you.
It would be better an iPhoto organizing photos by words like when iTunes browse his music.
Why on earth would anyone want to organise photos by words? A list mode is entirely pointless in a Photo application. That's like having an old photo album organised with the photos facing inwards so you can read the back of the picture.
Again, this is a characteristic of a File browser. You don't want a Photo organiser, you want a file organiser.
And, in iPhoto, you can search by tags, effortlessly in either the search box or by using a Smart Album.
iPhoto always loads all that events and all the thumbs library to scroll, and I think it's overkill.
So, how is iPhoto to know which ones you want to work with today? Open a library, get the Library.
Would be better a Cover Flow option to browsing in Events.
You've obviously never tried scrubbing along the Event icon.
Imagine iTunes using Cover Flow mode all the time. It won't be too useful.
Many, many people do, including myself on a library of 20k tracks totalling more that 100 gigs, and find it very useful. Same with the Finder.
And if when iTunes Store starts to sell photos?
Why on earth would the iTunes store start to sell photos?
My photos are not junk,
I didn't say there were. Read my post again.
When I said Finder to crop photos I mean Preview. But I feel in Finder. Because what's in Preview? A photo opened with a Preview's menubar and some cocoa APIs like adjustments. Not?
Oh, so you don't count Preview as an application. Fine. It is an application but you don't feel it. As you wish.
My point to you is very simple: Because of the way you want to organise your pics - using lists views and so on - iPhoto is not the application for you. Don't use it. But you keep writing things about the application that are untrue, and I'm aware that other folks search these forums and I don't want them to have inaccurate information about iPhoto.
Regards
TD -
What would be the simplest way to view and take control over the internet?
Hi All:
Can some one tell me what would be the best and simplest way to connect from my laptop to another laptop through the internet?
I have DYNdns running on the second laptop and have a host name assigned to that system for it to update the IP since the system uses different internet connections. The services that I would like to be able to have are the viewing and controlling of the system. I've read some where in this NG that if I have a copy of ARD admin. installed on that system also, it would be one way to do it... can some one verify this and please let me know if there are any specific settings I need to have on either one of the systems.
I can connect to the second laptop while in my home network with no problem and perform all tasks. when trying to connect through the internet.. the system shows offline .
Both systems are identical in hardware an software, Intel 2.16, 2G's RAM, OS X ver 10.5.2 all up to date and ARD 3.2
Yes, I'm new to ARD and yes I'm searching the NG and the net. but I figure it doesn't hurt to ask since time is limited.
All help greatly appreciated ..
TIA
Oscar A.To be able to connect to a workstation from outside it's network, the ports that ARD uses must be open on both ends of the connection. ARD uses ports 3283 and 5900 so those must be open.
If your workstations get their addresses from an NAT device rather than being "real", the ports also need to be forwarded in the router to the workstation's internal IP address. ARD uses port 3283 for the reporting and updating function, so if your Macs are getting their IP addresses through NAT, since you can only forward a port to a single workstation, you can only get reports, push package/files to etc. for a single workstation.
ARD uses the VNC protocol for observation and control, though, and there are a range of IP addresses for that protocol, starting with 5900. ARD uses 5900 by default, so that port would be forwarded to the first workstation. You would, I believe, need to install VNC servers on the systems (since the ARD client cannot listen on any port other than 5900 while VNC servers can be set for other ports such as 5901, 5902, etc. You would then forward 5901 to the second workstation (and on to 5902, 5903, etc.). You can then use the following information:
Remote Desktop 2: How to specify a port number for a VNC client
to connect.
The only other options are: 1) to run the ARD administrator on a workstation on the network, and then take control of that system from outside, either via VNC or another copy of ARD, or 2) set up a virtual private network (VPN) so that when you connect from outside, your admin system is officially part of the local network.
Hope this helps. -
I have a desktop MAC OSX Leopard. I want to upgrade to Quicken 2007, install Snow Leopard, download iLife'11. I heard that Quicken and Snow Leopard can clash..........that is why I am upgrading Quicken. What would be the best order of installing these products. I have gotten defferent opinions and I want to be sure I install them correctly.
Thank You.First, install OS X, then install your third-party software.
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
Destination entry field.
6. Select the source volume from the left side list and drag it to the
Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal
startup drive.
C. Important: Please read before installing:
1. If you have a FireWire hard drive connected, disconnect it before installing the
update unless you will boot from this drive and install the update on it.
Reconnect it and turn it back on after installation is complete and you've
restarted.
2. You may experience unexpected results if you have installed third-party system
software modifications, or if you have modified the operating system through
other means. (This does not apply to normal application software installation.)
3. The installation process should not be interrupted. If a power outage or other
interruption occurs during installation, use the standalone installer (see below)
from Apple Downloads to update. While the installation is in progress do not use
the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
logo appears.
5. Wait for installer to finish loading.
6. Follow instructions.
After installing Snow Leopard you should update it by downloading and installing Mac OS X 10.6.8 Update Combo v1.1. -
I just bought a new Mac and I want to transfer some data (not all) from my old Mac. Basically, I want to move my itunes library, iphoto library, and a few documents. I have not even turned on my new Mac yet. Is the best way by an external hard drive?
If both have Firewire ports then you can accomplish your goal by using Target Disk Mode. If this is not possible then you can do using an external drive or if you have a local network connect both to your network and use filesharing between the two computers.
File Sharing on Macs
Mac 101- File Sharing -
With SO MUCH photo editing software available, what would be the best for me if I am a digital camera newby? I do not need Photoshop CC! I do not want to spend $700 bucks! My camera is a Nikon D90. Please help.
Where did you come up with the $700 figure?
Photography plan - $9.99/month or $119/year - Creative Cloud Photography plan : Adobe Creative Cloud
Single App - $19.99/month
Complete plan - $49.99/month or $599/yr - Creative Cloud free trial & plans : Adobe Creative Cloud
Ah - If you wish to cancel early yeah $74.99 which would total for the year at $899.88. But that final total would be if you canceled in the 12th month but if you plan on keeping it that long might as well go for the annual contract. Then cancel at the end of the term limit if you need to.
If you are not sure what to get, Either Elements as was suggested by Peru Bob or the photography plan.
Maybe you are looking for
-
My Yahoo Mail is not Working on any of my Apple devices, It attempts to download new email but then stops. Any ideas?
-
When sales order is Blocked (oldest of open items overdue) MRP run avoid
We got a challenge with Client requirement regarding over due of payment terms 1. Credit master records Customer Credit limit usage example 24.14% 2. Customer Oldest open item is over due status 3. Sales order created with the warning message Oldest
-
hi i did dep run,background job was schedule in program then i gone to job over view and excuted message displaying SM37" no jobg scheduled" what is the problem guna
-
Proxy Redirect is not working with anyconnect
Hi, when users connect to the latest version of anyconnect there proxy server is not reconfigured to use the internal proxy server through the VPN tunnel. this is working for the normal VPN client. but not the anyconnect. Has anyone come accross this
-
Leftover Library "*.data" files - OK to Delete?
I have exported all photos to Aperture. I no longer use iPhoto 6.0.5. Nothing is left in the library and the iPhoto trash is empty. However, when I look in the iPhoto library in Finder I see three files consuming totalling 111mb of space: Thumb32Segm