I need to connect a Micro SD Card to my MacBook (10.6.8) 2011 so I can switch my Magellan RoadMate GPS for use with the new Mac Content Manager from Magellan. Can I do this? from

I need to connect a Micro SD Card to my MacBook (10.6.8) 2011 so I can switch my Magellan RoadMate GPS for use with the new Mac Content Manager from Magellan. Can I do this? from

Hi Robert and welcome to Apple Discussions,
There are adapters available that convert micro cards into fullsize ones.
You will also need a USB card reader if you do not have one.
Good luck,
Alan

Similar Messages

  • Just downloaded latest updates to Camera Raw for use with my new Sony RX100 M3 but still can't get the RAW files to open. Any suggestions?

    Just downloaded latest updates to Camera Raw for use with my new Sony RX100 M3 but still can't get the RAW files to open. Any suggestions?

    Never mind, I finally got it working, thanks!

  • Can I still download iwork apps for free with a new apple id?

    I bought a new ipad,iphone and mac. all activated for the first time with the same apple id. i can download all iwork apps for free at that time because the devices were bought after iwork is free for "new" devices. later on i'm thinking of creating a new apple id, can i still download iwork apps for free with the new apple id on all my 3 devices?

    Once they've been downloaded they can't be downloaded again using a different Apple ID.
    " This offer is limited to one Pages, Keynote and Numbers content code per qualifying product purchased":
    https://www.apple.com/au/creativity-apps/mac/up-to-date/

  • I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

    I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

    I tightened all HD screws and it didn't help. With the machine running and side of the case off, I physically stopped both the video card fan and the front case fan with my finger for a couple seconds and the noise continued. I also took all hard drives out one by one and rebooted each time. Again, the noise continued until I took out the Mac HD in Bay 1, rebooted, and I had a very quiet, silent machine. The issue is the hard drive in bay 1 that shipped with the computer, it's without a doubt causing the hum/woosh sound. I still need to know if I can safely swap the Mac HD from bay 1 to bay 4 without any issues to the operating system. I would like to try that to see if it dampens the noise but I also want to make sure this swap won't screw up my machine at all.

  • Since i have upgradet my ipod touch 3g with the new 5.0.1 version,  i can`t upload music or pictures or apps or anything else. the synchronize button is gray and allows nothing. the i tunes version is the 10.5.3 ... please help me!

    since i have upgradet my ipod touch 3g with the new 5.0.1 version,  i can`t upload music or pictures or apps or anything else. the synchronize button is gray and allows nothing. the i tunes version is  10.5.3 ... please help me!

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • I have an external hard drive that was formatted by a PC and has files and directories etc. I want to format it and use it on my IMAC for backup but I can't seem to write to it nor can I delete current content. How do I initialize it for use with the MAC?

    I have an external hard drive that was formatted by a PC and has files and directories copied to it etc. I want to use it on my IMAC for backup. I see it on my my IMAC . I can open files etc.  But I can't seem to write to it nor can I delete current content. I don't care if I lose current content. How do I initialize it for use with the MAC?

    You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
    http://www.macupdate.com/app/mac/24481/ntfs-3g
    If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

  • I have a company Ipad that belonged to a deceased employee. no access to his icloud or appleID. how can I restore it for use with a new apple ID

    I have a company Ipad that belonged to a deceased employee. no access to his icloud or appleID. how can I restore it for use with a new apple ID?
    The apple ID was his personal account and can no longer gain access. Im sure I can get purchase recipts from the accounting department if needed. I tried to put the Ipad in restore mode and used itunes to "recover" the ipad but it still wont let me in because he registered the device with the "lost iphone" feature or whatever that is.

    Activation Lock in iOS 7  >  http://support.apple.com/kb/HT5818
    The Apple ID and Password that was Originally used to Activate the iDevice is required
    If you do not have that information you will not be able to use the Device.

  • Fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue

    fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue Asked this question yesterday. I desperately need info, will I ever be able to use fast dial again?

    I tried it and it WORKED....I even tried the other version BEFORE this one and it didn't work so I tried yours and it worked like a charm so THANKS brother....

  • Im tryin to re install os x on my macbook pro i get a pop up saying this apple id has not yet been used with the app store what do i do to get over this hump

    im tryin to re install os x on my macbook pro i get a pop up saying this apple id has not yet been used with the app store what do i do to get over this hump

    If you can log into the computer, go to the Mac App Store and purchase Mavericks under your AppleID.   Even though its free, they still consider it a purchase.
    If you are not able to log into your Mac you can try on a different Mac.  Once you purchase it, you can stop the download if you want.
    Once you do that then you should be able to reinstall via the Recovery HD

  • 10.2 crashes when I try to convert old libraries for use in the new software. Is there a workaround for this? Or will i have to continue using the previous version to complete older projects?

    Final Cut Pro X 10.2 crashes when I try to convert old libraries for use in the new software. Is there a workaround for this? Or will I have to continue using the previous version to complete older projects? the only foreseeable solution is to begin any new projects on 10.2 or importing footage on 10.2 and starting form scratch--which is something i definitely don't want to do or have time to do. ANY advice, thoughts, or opinions would be greatly appreciated! Thank you!
    Running 10.10.3 // MacBook Pro (Retina, 15-inch, Early 2013) // 2.4 GHz Intel Core i7 // 8 GB 1600 MHz DDR3

    Exactly the same problem with me.
    Some other threads advice to remove fonts, clean the caches, remove add ins but nothing works consistenty, for some it looks like it works, for me it failed.
    What I did not try yet, was to move the Render files out of the malicious library to trash.

  • HT204387 Can a wireless mouse be used with the new IPAD?

    Can a wireless mouse be uses with the new iPad?

    While it is true that mice or other pointing device like track pads are not supported on the iPad since there is no real pointer, I use a stylus pen. I know it would probably tip over the iPad if you are standing it up, but it's the closest I've seen. I use the Wacom Bamboo stylus and a Zagg keyboard and the case for the iPad and keyboard. I use the stylus a lot on the Paper app to take notes in meetings and such. Not really a solution but if you are trying to move an insertion point in a document, it does work.

  • Can I still make a playlist of podcasts with the new podcast app?

    Can I still make a playlist of podcasts with the new podcast app?

    No, for some reason it's not included as one of the features of the Podcast App.
    If you need playlists (as many of us do), then delete the Podcast App and podcasts will return to the music app, complete with podcast playlist functionality.

  • HT204347 is there an audio card that comes standard with the new Mac Pro?

    Is there an audio card that comes standard with the new Mac Pro?

    Hi cvs904,
    If you are interested in more information about the built-in audio ports on the new Mac Pro, you may find the following article helpful:
    Mac Pro (Late 2013): Audio ports
    http://support.apple.com/kb/HT6024
    Regards,
    - Brenden

  • HT3775 How can i play my avi formatted movies with the new mac OSX 10.9.2 update?

    How can i play my avi formatted movies with the new mac OSX 10.9.2 update?

    Try using VLC or installing both QuickTime 7 and Perian. Nothing will work with all AVIs; some of them require codecs not available for Mac OS X.
    (105507)

  • How can i use 3(or more) hdmi monitors with the new Mac Pro(2013)?

    I've been looking around, trying to find a solution to this problem.
    I saw at one place that an active thunderbold -> DVI will work with the older mac pro model.
    Will this work with the new one as well?
    Will i be able to connect 3 screens if i use 2 passive thunderbold->hdmi and one
    active thunderbold->dvi and then a dvi->hdmi?

    If you need to buy Apple's $99 Mini DisplayPort to Dual-Link DVI Adapters you may find you need to return and replace the adapter/s till you find one that works.
    Recently, after my nMP arrived I bought two adapters. It took 3 trips to the Apple store to find a second one that worked properly. This also happened a few months ago when I was buying those adapters.
    You should be aware that you'll also need the DVI cable that has the full set of pins, not the one with the row in the middle missing.
    If you check on the Apple customer reviews in the online store you'lll find the issues and possible solutions to this situation.
    Eventually I returned the second adapter when I found a way to get 2560 x 1600 through the HDMI port. I now have two 30" monitors that display 2560 x 1600.

Maybe you are looking for