I need to save data on FP-2000, how can i do that?

i read measurements from FP-TC-120 and i need to save them on the fieldPoint memroy, and read it once a day,
how can i save the measurements and read them when i need?

There are various documents at the NI Developer Zone that explain how to log data in a FP-20xx controller.
These examples and tutorials explain in detail how to do this.
In general, once you have got the value from the FP I/O Module in the LV Program, you can use the File I/O VIs to save this information to disk.
Please refer to the NI Developer Zone page
URL: http://zone.ni.com/zone/jsp/zone.jsp
and use the search engine (type the words "fp" and "log") to get the documents that explain how to log data in an FP-20xx.
The URL to these documents is shown below:
http://search.ni.com/query.html?col=alldocs&layout=Zone&qp=section%3Adevzone&qt=fp+log
I hope this helps.

Similar Messages

  • I'm a new mac user and need to program future email's. How can I do that? in outlook I can make a change in the date that the email will be sent. How I do that in mail?

    i'm a new mac user and need to program future email's. How can I do that? in outlook I can make a change in the date that the email will be sent. How I do that in mail?

    There isn't a way directly in Mail.
    Here's what google says: http://www.google.com/search?client=safari&rls=en&q=mac+os+x+mail+delayed+send&i e=UTF-8&oe=UTF-8

  • I need to set up 9 IPhones and 4 IPads to be used as data collection devices. How can I do that without setting up 13 separate ITunes accounts?

    I need to set up 9 IPhones and 4 IPads to be used as data collection devices. How can I do that without setting up 13 separate ITunes accounts?

    You can use the same account to set up as many devices as you like.
    You might also find there are tools to help with a roll out.
    http://www.apple.com/support/iphone/enterprise/
    tt2

  • HT1296 I was using the iCloud for my iPod and had recorded an important Voice Memo on the device. Before I was able to store it on my computer, the device stopped working. I have the data on the Cloud, how can I get that back to my iMac?

    I was using the iCloud for my iPod and had recorded several irreplaceable Voice Memos. It went up to the Cloud, but I wasn't too savvy with the Cloud at that point, so it wasn't syncronizing to my home computer. So, the thing is that the iPod died and the backup is in the Cloud and I would like to load the backup to my iMac to recover my data. How can I do that? Thanks

    The new device I got to replace the iTouch is a iPad and I don't see the playlist I created with previous voice memos on it at all. Is there any way to access them on the iPad? If I erase the iPad and restore it with the old back up will the Voice Memos come along and get in to my home computer or will I be out of luck?

  • HT201269 My iPhone5 was stolen and need to back up all data How can I do that?

    My iPhone5 was stolen and need to back up all data How can I do that?

    If you mean data from the iPhone itself, you can't back up anything from it now that it's no longer in your possession. If you didn't previously back up to iTunes or iCloud, then unless you are lucky enough to recover the iPhone intact, any data on it is lost.
    Regards.

  • How can i delete data in psa and how can i partation psa?

    hi friends,
    can i delete data from psa and how can i partation psa?
    Thanking u
    suneel.

    hi Suneel,
    http://help.sap.com/saphelp_nw70/helpdata/en/7d/724d3caa70ea6fe10000000a114084/frameset.htm
    Using partitioning, you can separate the dataset of a PSA table into several smaller, physically independent, and redundancy-free units. This separation can mean improved performance when you update data from the PSA. In the <b>Implementation Guide with SAP NetWeaver  > Business Intelligence > Connections to Other Systems  > Maintain Control Parameters for Data Transfer</b> you define the number of data records needed to create a new partition. Only data records from a complete request are stored in a partition. The specified value is a threshold value.
    transaction SPRO to go implementation guide
    at database level
    http://help.sap.com/saphelp_nw70/helpdata/en/33/dc2038aa3bcd23e10000009b38f8cf/frameset.htm
    If you are using this database you can also partition PSA tables. You first have to activate this function using RSADMIN parameter DB4_PSA_PARTITIONING = 'X'. SAP Note 815186 includes more comprehensive information on this.
    hope this helps.

  • I adobe acrobat 7.0 professional. When I open or save a PDF it reverts to Adobe Reader XI. How can I change that to the pro as it has far more editing options.

    I adobe acrobat 7.0 professional. When I open or save a PDF it reverts to Adobe Reader XI. How can I change that to the pro as it has far more editing options.

    You may want to keep Reader. You may want to select Acrobat as your default, but be able to click on a PDF (or PDF link) to open in Reader when needed. There are likely some PDFs that will not open correctly in AA 7 because of new features folks add. Just because it opens in Reader XI does not mean it is in the new format, but just that is the default opening you have. To tell the type of file, you have to open the PDF and check the properties (ctrl-D) and check Description>PDF version.

  • TS1544 I am the administrator of my MacBook Pro, which I share with my kids. One of them forgot his password, so as the admin I changed it for his account, but  when I try to see his account, it says I need to provide the keychain password. How can i get

    I am the administrator of my MacBook Pro, which I share with my kids. One of them forgot his password, so as the admin I changed it for his account, but  when I try to see his account, it says I need to provide the keychain password. How can i get it? I have no idea how to sort this out...

    First, make sure caps lock is not on.
    You must back up all data before continuing, unless you've already done so. If you need to back up but can't log in, ask for instructions.
    If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
    Otherwise*, boot into Recovery mode. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window opens.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
    Select
     ▹ Restart
    from the menu bar.
    You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
    *Note: If you've activated FileVault, this procedure doesn't apply. Follow instead the instructions on this page:
    If you forget the password and FileVault is on

  • I have been trying to work on my homework all afternoon, via NAU's blackboard system. I am continuously getting booted out of the system, with an error stating "Data execution prevention". How can I prevent this from continuing?

    I have been trying to work on my homework all afternoon, via NAU's blackboard system. I am continuously getting booted out of the system, with an error stating "Data execution prevention". How can I prevent this from continuing?

    If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
    If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
    As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
    If there are specific tasks you need help with:
    http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
    Is a good resource.
    Peter

  • I am on a intel Imac and need to update to 10.5. How can i do this?

    I am on a intel Imac and need to update to 10.5. How can i do this?

    You really should update to Snow Leopard because Leopard is no longer in production. The following tells you about Snow Leopard but also what's need to upgrade past Snow Leopard should you be able and wish to do so.
    Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    Upgrading to Snow Leopard
    You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s MobileMe service; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer)
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
             3. MacBook Pro (Mid/Late 2007 or newer)
             4. MacBook Air (Late 2008 or newer)
             5. Mac mini (Early 2009 or newer)
             6. Mac Pro (Early 2008 or newer)
             7. Xserve (Early 2009)
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
         Am I eligible for the free upgrade?
             See Apple - Free OS X Mountain Lion upgrade Program.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.
    How to Install OS X Updates Successfully
    A. Repair the Hard Drive and Permissions:
    Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally. 
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    B. Make a Bootable Backup Using Restore Option of Disk Utility:
      1. Open Disk Utility from the Utilities folder.
      2. Select the destination volume from the left side list.
      3. Click on the Restore tab in the DU main window.
      4. Check the box labeled Erase destination.
      5. Select the destination volume from the left side list and drag it to the
          Destination entry field.
      6. Select the source volume from the left side list and drag it to the
          Source entry field.
      7. Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal
    startup drive.
    C. Important: Please read before installing:
      1. If you have a FireWire hard drive connected, disconnect it before installing the update
          unless you will boot from this drive and install the update on it. Reconnect it and turn
          it back on after installation is complete and you've restarted.
      2. You may experience unexpected results if you have installed third-party system
           software modifications, or if you have modified the operating system through
           other means. (This does not apply to normal application software installation.)
      3. The installation process should not be interrupted. If a power outage or other
          interruption occurs during  installation, use the standalone installer (see below)
          from Apple Downloads to update.  While the installation  is in progress do not use
          the computer.
    D. To upgrade:
    Purchase the Snow Leopard Retail DVD.
    Boot From The OS X Installer Disc:
          1. Insert OS X Installer Disc into the optical drive.
          2. Restart the computer.
          3. Immediately after the chime press and hold down the "C" key.
          4. Release the key when the spinning gear below the dark gray Apple
              logo appears.
          5. Wait for installer to finish loading.
          6. Follow instructions.
    E. If updating:
      1. Download and install update(s) 
      2. Use Software Update, or
      3. Download standalone updater(s).

  • How can i ensure that the time capsule back up all my data?

    how can i ensure that the time capsule back up all my data and no any data missed during the back up? becz i was backing up my mac to time capsule for the first time and it takes only 5 hourse for 279GB which is doesnt make sense
    any idea, how to ensure that all my data been backed up

    well this tells you why you are having issues.. since you have a filevault and unless you are logged on as that user TM has no way to backup the vault.
    so that is why the backup is so small.
    And you cannot remove the file vault because the disk is too small.. you are in catch 22..
    You cannot backup and you cannot remove the vault..
    Login as the user who has the file vault and copy the files off the computer to a directory on the TC.. Then just delete the files on the computer.. that will then allow you to remove the file vault.
    But never  will I ever use file vaults so I am being theoretical .. please read it up yourself.
    http://pondini.org/TM/25.html
    You are not doing the background reading you need to understand what you are doing..
    read the whole of pondini's info.. or at least skim it so you know what is there.
    Avoid like the plague file vaults..
    When disks go belly up, as they always do.. your files will be lost. Somewhere they need to be stored in the clear.. so why bother .. put better security on the computer and forget vaults.

  • The hard disc of my laptop has crashed and i lost all the data. Now I want to take back up of my I phone and transfer contacts , messages and music back into my laptop , how can I do that. Pl help

    The hard disc of my laptop has crashed and i lost all the data. Now I want to take back up of my I phone and transfer contacts , messages and music etc back into my laptop , how can I do that. Also let me know how I can transfer the contacts into Windows contacts from I phone. Pl help

    Your content will only be where you put it.  It has always been very basic to always maintain a backup copy of your computer.
    You can transfer itunes purchases from your iphone: File>Device>Transfer purchases.
    You can import your pics taken with the iphone as you would with any digital camera.
    You can e-mail the other pics to yourself, they will never be of the original quality.
    You can out a unique contact and calendar entry on the computer.  You should get the option to merge the data when you sync.

  • I am receiving the data through the rs232 in labview and i have to store the data in to the word file only if there is a change in the data and we have to scan the data continuasly how can i do that.

    i am receiving the data through the rs232 in labview and i have to store the data in to the word or text file only if there is a change in the data. I have to scan the data continuasly. how can i do that. I was able to store the data into the text or word file but could not be able to do it.  I am gettting the data from rs232 interms of 0 or 1.  and i have to print it only if thereis a change in data from 0 to 1. if i use if-loop , each as much time there is 0 or 1 is there that much time the data gets printed. i dont know how to do this program please help me if anybody knows the answer

    I have attatched the vi.  Here in this it receives the data from rs232 as string and converted into binery. and indicated in led also normally if the data 1 comes then the led's will be off.  suppose if 0 comes the corresponding data status is wrtten into the text file.  But here the problem is the same data will be printed many number of times.  so i have to make it like if there is a transition from 1 to o then only print it once.  how to do it.  I am doing this from few weeks please reply if you know the answer immediatly
    thanking you 
    Attachments:
    MOTORTESTJIG.vi ‏729 KB

  • Need help to import and syncronize HCM pagelets with Interaction Hub, how can I do that?

    Hi,
    I need help to import and synchronize HCM pagelets with Interaction Hub, how can I do that? The default page "Select Remote Content" of the WorkCenter "Unified Navigation WorkCenter" is not working as well, when I run the import/sync button I get the following error message:
    Integration Gateway: General Connection Failed (158,10836)
    This error is thrown when there is no valid response.
    Possible errors include:
    Bad gateway URL
    Sync Service Timeout set and Service actually timed out.
    Java exception thrown - Check Application Server for possible Java exception

    Do you have integration configured between the two systems?  It sounds like you don't from the error.  Here is a walk-through on setting up Unified Navigation although it assumes you have integration already working.  If you haven't done that, it's documented a hundred different places.
    http://remotepsadmins.com/2013/03/04/peoplesoft-unified-navigation-with-peoplesoft-applicatations-portal-interaction-hub/

  • Hey there! So I plugged in my ipod to my computer and it didn't show up where it normally does. I need to update my song list. How can I make it appear? It doesn't come up in Iphoto. A few days ago my sispluggeditintoanothercomputerbutidon'tknowwhatshedid

    Hey there! So I plugged in my ipod to my computer and it didn't show up where it normally does. I need to update my song list. How can I make it appear? It doesn't come up in iphoto either. A few days ago my sis plugged it into another computer but I don't know if she synched it to the other computer, and frankly, she won't remember. I have tried updating itunes, charging the ipod, restarting the ipod/computer, and the rest of what the apple site said to do. Ps I have the latest ipod touch
    I need help stat! Please help!

    I'd say your sister messed up and your iPod is toasted.
    Think about it...  She plugged it in to another computer, she doesn't remember what she did (yeah, right), and now your iPod is not being recognized by your computer... 
    Also take into consideration how old is your sister, and how much does she know about electronics?

Maybe you are looking for