I no longer can control the volume on my iphone using the buttons on the side

Anyone,
I have lost the ability to adjust volume using the side buttons. Also, I cannot hear any sounds on my applications. I can hear music and videos using the ear phones. I can hear the phone ring. Anyone have this problem?

Try this and see if it works.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Similar Messages

The volume on my iPhone dissapeared,if i press the buttons it wont show up,when I play music I can't hear it,and i cant see the volume on what it's set to!

My iPhone's volume is not working and showing anymore, when i press the buttons it wont show, and when i play music it wont show and i can't hear anything! Please help!

Your volume limit may be restricted.
Check Settings > General > Restrictions

Hi , I cant use the music bar in the control center I can only change the volume but I cant skip tracks or pause the song or play it. anyone knows the solution or the reason please?

Hi , I cant use the music bar in the control center I can only change the volume but I cant skip tracks or pause the song or play it. anyone knows the solution or the reason please?

That's normal.
Use the Touch ID to unlock passcode.
http://help.apple.com/iphone/7/#/iph672384a0b

I can't control the volume from my iphone 4 headset. What can I do???

I can't control the volume from my iphone 4 headset. What can I do???

Go to Settings > Sounds. There is this option call Change With Buttons. Is it On or Off?

Why can I not turn the volume very loud when using headphones?

When I play music back the volume is not very loud, I have put the volume to the high setting but not very loud. Can any one help?-

Hi, I have some questions in tha case before we can decide whats wrong
1) Is it happening with particular song? - if yes then its an issue with song
2) is it with all songs( check head phones with other player or so it might be faulty)
3) Is there any volume limit (lock) set on your ipod
if head phones are fine and if it happens with all songs and if same songs play with good sound on computer you might need to restore your ipod and reupdate the songs may be an issue with ipod but if all songs play with similar kind of sound on computer your ipod should be ok as it might be the sound quality of those songs

The Volume on my Mac pro is not working. I can't raise or lower the volume and sometimes it mutes by itself. additionally, the speaker button on the top right is garbed out.

The Volume on my Mac pro is not working. I can't raise or lower the volume and sometimes it mutes by itself. additionally, the speaker button on the top right is garbed out.

Hi there profreak,
You may find the troubleshooting steps in the article below helpful.
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/ts1574
-Griff W.

I can't find Siri on my iphone 5s when I hold the home key voice commands comes up and Siri isn't in my settings

I can't find Siri on my iphone 5s when I hold the home button voice control comes up. When I go to settings Siri is not there. Has anyone else experienced this?

Check Settings>General>Restrictions and see if they are turned on and Siri is restricted.

Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.

Hi,
I'm running WebLogic 5.1 sp10 on a Solaris box and I get the
following error:
java.rmi.RemoteException: java.lang.InternalError: Can't connect to
X11 window server using ':0.0' as the value of the DISPLAY variable.
 at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
 at sun.awt.X11GraphicsEnvironment.(X11GraphicsEnvironment.java:59)
 at java.lang.Class.forName0(Native Method)
 at java.lang.Class.forName(Class.java:120)
 at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58)
 at java.awt.Font.initializeFont(Font.java:264)
 at java.awt.Font.(Font.java:298)
 at com.hrw.xls.EmailXLSThread.getCellWidth(EmailXLSThread.java:162)
caused by the following code fragment:
Font f = new Font(fontName, fontStyle, fontHeight);
FontMetrics fm = (new Panel()).getFontMetrics(f);
Have I just forgotten to set an environment variable? I would prefer
not to install bulky pieces of software, but if that's what it takes
to get over this error, so be it.
Thanks, Dave A.

A Java AWT, X11 problem posted in the weblogic ejb newsgroup. I haven't been in here for long, but
that has to be a first.
If you have the DISPLAY env variable set to :0.0, you have to be at the console on a Solaris box
running the XServer. 'xdm' I think is the code that has to be running. Also, I think the format is
<hostname:0.0> or better <hostname:0> unless you are on a multi-headed workstation. Something like:
export DISPLAY=hostname:0
where hostname is the name of the host running an XServer and the .xhosts file allows access to the
XServer from the display client.
Apparently, you are not at the console?
Anyway, I don't think there is a newsgroup here that I could even recommend to cross-post this to as
it is not a WebLogic question. I think I would try the Discussion Forums at http://java.sun.com.
Bill
"D. Alvarado" wrote:
Hi,
I'm running WebLogic 5.1 sp10 on a Solaris box and I get the
following error:
java.rmi.RemoteException: java.lang.InternalError: Can't connect to
X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.(X11GraphicsEnvironment.java:59)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:120)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58)
at java.awt.Font.initializeFont(Font.java:264)
at java.awt.Font.(Font.java:298)
at com.hrw.xls.EmailXLSThread.getCellWidth(EmailXLSThread.java:162)
caused by the following code fragment:
Font f = new Font(fontName, fontStyle, fontHeight);
FontMetrics fm = (new Panel()).getFontMetrics(f);
Have I just forgotten to set an environment variable? I would prefer
not to install bulky pieces of software, but if that's what it takes
to get over this error, so be it.
Thanks, Dave A.

Im having problem with the dvd quality, I'm using compressor to convert the video fils from apple prores to mpeg2 .It doesn't matter how long my video is even if its just 5 minutes I'm getting cut edges in the video , does anyone have any idea ?

Im having a problem with the dvd quality, I'm using compressor to convert the video fils from apple prores to mpeg2 .It doesn't matter how long my video is even if its just 5 minutes I'm getting cut edges/lines in the video specialy if i have titles it comes up really bad , I took the same video to a friend of mine who have PC and he uses Encore , did the encoding there and it was just fine no problems! BTW I tried using doferent setings in compressor from CBR and VBR I even pushed up the setings to 8 or 9 BR and still no luck !
does anyone have any idea ?
Thanks in advence ...

Let's focus attention on just the Sony. (What model and what resolution are you shooting?)
For now, I'll assume you're shooting 1080i.
Take a representaive clip into a new sequence. Add a title.
In your sequence, make sure field dominance is set to Upper.
Set render settings to Pro Res 422.
After rendering, export QT self contained.
Import into Compressor (I'm now referring to v3.5).
Select the 90 minute Best quality DVD preset.
Open frame controls and turn on (click the gear icon). Set Resize filter to Best.
Submit burn and check quality on TV.
Good luck.

Mac OSX 10.8.3, Firefox 20.0 - Can't eject volume "because Firefox is using it". Why is firefox using my external media?

Mac OSX 10.8.3, Firefox 20.0 - Can't eject volume "because Firefox is using it". Why is firefox using my external media?

Did you use Firefox to download something to that external media?
If so, try clearing the Downloads Manager.

Hello, I would like to buy an I Pod Classic 160 GB and have heard that the volume limit in Europe has been reduced from the factory. Are the devices in the U.S.A also affected?

Hello, I would like to buy an I Pod Classic 160 GB and have heard that the volume limit in Europe has been reduced from the factory.
Are the devices in the U.S.A also affected?
Volker

No, they are not. But getting round this is not that simple.
Until recently, the European Volume Limit that you're referring to affected iPods sold within the EU (European Union countries), so one purchased in the US would not be affected by this. Nor, in theory, would an iPod purchased in Norway or Russia, since neither of them are in the EU.
However, iPod Classics now sold within the UK (where I live) now appear to have an option to disable the EU Volume Limit. I would assume therefore, that this option is available on an iPod Classic bought anywhere within the EU. The firmware on an iPod Classic that can turn off the EU volume Limit is 2.0.5.
iPod Classics running earlier versions of the firmware (including 2.0.4) cannot be upgraded. I have personally seen one with 2.0.5 Mac on it in an Apple Store and the EU limit could be turned off. Check the picture from Badgorr in this thread New Option to turn off EU Volume Cap? (It's towards the bottom of the page.) However, non-Apple stores may still have older stock, so be aware of this when you go shopping.
Experience tells me that buying an iPod from outside the European Union area is not that simple and you are unlikely to manage it. Apple will not ship goods to another country. So either you travel to the US to buy one from a shop (that's a bit extravagant) or you persuade someone else to buy one and send it to you. However, not only will you have the cost of shipping, but in either case, your country's tax department will almost certainly add tax to it when it comes into the country. The service delivering it will apply the tax and charge you for doing so as well or you get charged by the customs department at the airport.

Why does "plugin container for firefox" suddenly adjust the volume on my laptop? It only adjusts the volume of firefox, but it lowers it to next to nothing. HELP!

As of just today, whenever i play a video in firefox, the volume suddenly drops to next to nil. The problem is that i didn't change ANYTHING. I looked at my volume control, feeling that something was wrong there. And it was. [http://s1207.photobucket.com/albums/bb465/Hagosha/?action=view&current=FirefoxErrorReport.png link text]
This is what i saw. I tried numerous times to change the volume back, and every few minutes it would return to what it was in the picture. Any ideas WHY it's suddenly doing this? Nothing has changed, but it just started today.

Try updating Adobe Flash to the latest version. Your current installation exposes your system to exploits. See http://www.adobe.com/support/security/bulletins/apsb11-12.html
You also need to update Adobe Reader. See http://www.adobe.com/support/security/bulletins/apsb11-08.html
Update links: 
* http://get.adobe.com/flashplayer/ 
* http://get.adobe.com/reader/?promoid=BUIGO 
* http://www.java.com/en/ 
The Java update is not a security issue, but does enable Java to improve performance in Firefox 4.0.x

Is there a way to boost the volume on an IPhone 3G

Is there a way to boost the volume on my IPhone 3GS?

I'm guessing you mean a way, other than pressing the volume UP button on the headphones cable... Also, are you saying that the maximum volume (using the volume button) is not loud enough? If so...
I don't have the 3G iPod shuffle, but there is probably a Limit Maximum Volume setting, and it may currently be set lower than you want. With the iPod shuffle selected in the iTunes sidebar (under DEVICES), go to the Settings or Summary tab (over to the right). See if there is control there for limiting the maximum volume on the shuffle. If so, disable it or set it to the desired max loudness. Apply the change.

HT4137 the volume on my iphone isnt working

the volume on my iphone isnt working, how do I fix it?

I had the same problem as well for nearly 3 months.
I had tried bring the Iphone into my phone carrier and they sent me to the AppleStore. When I brought it to them they hooked it up to the diagnostic machine and they told me just to restart the Iphone from the factory settings.
This didn't work either. To complicate things more, other "solutions" seem to only yield temporary success. These temporary solutions included: blowing compressed air into every port, various restart combinations, various factory restore methods.
I had nearly given up until I stumbled upon a support post on Apple's website that finally yielded success.
http://support.apple.com/kb/TS1630
The solution for me is listed as line 7, which reads:
"Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris."
Apparently, this cylinder shaped, mesh area is in some way tied to what triggers the headphones/speaker selection. I am not sure how, but I can say that after gently brushing it out my sounds are working again; specifically my music is now able to play directly off the speakers and my Iphone apps all play their sounds agian.
Hope this helps you as well!

HT1688 Why won't the volume on my iPhone 5 go down when I press the bottom volume up only works?

Why won't the volume on my iPhone 5 go down

Hey cacobo,
I found an article that can help with troubleshooting an iPhone's receiver or speakers.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
Make sure the Ring/Silent switch is not switched to silent.
While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (chooseSettings > General > Bluetooth).
Restart the iPhone.
If restarting the iPhone doesn't resolve the issue, try restoring the device.
If the issue persists, go to the Service Answer Center - iPhone for information on service.
Hope that helps,
David

I no longer can control the volume on my iphone using the buttons on the side

Similar Messages

Maybe you are looking for