Hi , I cant use the music bar in the control center I can only change the volume but I cant skip tracks or pause the song or play it. anyone knows the solution or the reason please?

That's normal.
Use the Touch ID to unlock passcode.
http://help.apple.com/iphone/7/#/iph672384a0b

Similar Messages

If I want to record the screen with Quicktime I dont find the "Built-in Input: Line in" There I can only change between "None" or "Built-in-Microphone: Internal microphone"

If I want to record the screen with Quicktime I dont find the "Built-in Input: Line in" There I can only change between "None" or "Built-in-Microphone: Internal microphone"

Have a look at Soundflower at this link:
http://www.macworld.com/article/1159440/soundflower_capture.html

Porting an InDesign Plugin from InDesign CC to InDesign CC 2014 the plugin complies successfully with the InDesign CC 2014 SDK but at run time presents this error and is disabled. Does anyone know what might be the issue?

Porting an InDesign Plugin from InDesign CC to InDesign CC 2014 the plugin complies successfully with the InDesign CC 2014 SDK but at run time presents this error and is disabled. Does anyone know what might be the issue?
Run TimeError Message Presented when InDesign CC 2014 runs:
Adobe InDesign cannot load the FastFractions.InDesignPlugin plug-in. The FastFractions.InDesignPlugin plug-in requires the 9.0 version of InDesign. Please contact the vendor to get a compatible version of FastFractions.InDesignPlugin.
Show this alert again?

As already told this means that the plugin has not been ported correctly. Some part of it for ex InDesign libraries or frameworks are being referenced from the CC sdk instead of the CC2014 sdk. To troubleshoot it i would advise you to rename the folder containing the CC sdk on your machine and then compile the project, it will fail to compile and you will get to know straightaway what aspects of the ported project are still accessing the old sdk. Fix the errors and your plugin will load fine.
Thanks,
Manan

Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab. It allows me to select my hard drive selection, but will not allow me to make any other selections. Does anyone know their way around this obstacle? Thanks!

Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab. It allows me to select my hard drive selection, but will not allow me to make any other selections such as options. Does anyone know their way around this obstacle? Am I doing anything wrong? Thanks

Hello, The Hatter, I read about the 'trick' of backing up, erasing, and restoring too, but I figured it would take longer than defragmenting the disk.
But the defragmentation process has just finished! so I'm gonna try to run Boot Camp again soon!
Thanks for your helpfulness, anyway.
And P.S. I didn't clone my system onto the external drive, I just inserted the Mac OS X Install CD, rebooted holding down the "C" key, and installed a fresh Snow Leopard system onto the predetermined partition. I will use that in cases of emergency, when my main/internal system becomes unusable.

My iphone 4s keeps trying to shut down (the red bar keeps popping up) and I can only call using speaker or having headphones in.

I have no idea what is wrong with my iphone. Just this morning it started to constantly try and power down as if I keep pressing the power button on top which I am not doing. Also I talk on a call or hear a call unless i have my headphones in or it is on speaker phone. Also the very top right corner of my screen it a tad warped. I did not drop it and it didn't get wet so I have no idea what is going on. What is wrong with my phone?

Your device needs service. Something is causing the Sleep/Wake button to act like it is constantly being pressed.
If within warranty, and solong as Apple determines there is no user/accidental damage to the device, it should be free.
Otherwise, it will ocst $199 for an iPhone 4S out-of-warrantry replacement.

The latest update has resulted in a runtime error (R6034) and I keep being told Microsoft Visual C Runtime Library is being accessed incorrectly. Anyone know how to overcome the problem? I am using a Dell Inspiron 9400 running Vista.

The latest update to itunes has resulted in a whole series of runtime errors (R6034). Microsoft Visual C++ Runtime Library states it is being accessed incorrectly. I am also told that Apple Mobile Device Failed to Start. Additional messages suggest the error is in itunes.exe and ituneshelper.exe. I also get Error 7 (Windows error 1114). Anyone got any ideas how to overcome this (these) problems?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99527)

Does anyone know how to reset the fan on a MacBook Pro 13-inch (Late 2011) to it's factory setting speed (Maybe Terminal may help?)

I have a late-2011 13-inch MacBook Pro running OS X Yosemite. (Standard configuration).
My problem is that I downloaded a fan control application and it worked perfectly, but it started to get annoying so I deleted it.
Does anyone know how to reset the fan speed back to factory settings (Maybe a command in terminal?)

Hello damo1177,
It should help to reset your system's SMC and NVRAM.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
Cheers,
Allen

Can anyone help me- I recently had an archive operating reinstall completed at the genius bar (so they didn't have to delete my hard drive), but now my battery says "not charging." It used to hold a 2.5 hour charge, and now nothing. Can anyone help?

Can anyone help me- I recently had an archive operating reinstall completed at the genius bar (so they didn't have to delete my hard drive), but now my battery says "not charging." It used to hold a 2.5 hour charge, and now nothing. Can anyone help?

Hi, Michelle. Welcome to Apple Support Communities.
Have you tried resetting the SMC? The SMC (System Management Controller) has control over the charging function, so resetting it may help.

Has anyone found a solution for the error "The iCloud Control Panel did not install properly". I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar.

Has anyone found a solution for the error "The iCloud Control Panel did not install properly". I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar. Cloud control panel version 2.0.

Has anyone found a solution for the error "The iCloud Control Panel did not install properly". I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar. Cloud control panel version 2.0.

Hi! Anyone know how to extend the intro of the music I want to use in a video in imovie?

Hi! Anyone know how to extend the intro of the music I want to use in a video in imovie?

Hi trineram,
Welcome to the Support Communities!
The article below may be able to help you understand the parameters for adding music to an iMovie for iOS project.
iMovie for iOS (iPad): Add background music
http://support.apple.com/kb/PH3192
Cheers,
- Judy

I selected a clip in the Project window in iMovie 11, opened the Clip Trimmer for that clip, chose the part of the clip I wanted to keep with the yellow bars, and "trim to Selection" in the menu bar is light grey so I can't complete the edit. I'm using a

I selected a clip in the Project window in iMovie 11, opened the Clip Trimmer for that clip, chose the part of the clip I wanted to keep with the yellow bars, and "trim to Selection" in the menu bar is light grey so I can't complete the edit.
I'm using a MacbookPro so can't right click to highlight (as was suggested in this forum for the same problem) and can't seem to highlight that area. What do I do?

When using the Clip Trimmer, you click DONE to indocate that you are finished.
The Trim To Selection is a great tool and I use it all the time, but you use it in the main project timeline, not the clip trimmer. Just select the frames you want so that the yellow border is around them. Then right-click and select Trim to Selection.

When I view the music on my iPhone in iTunes, how do I view this by album, rather than in a long list of songs?

When I view the music on my iPhone in iTunes, how do I view this by album, rather than in a long list of songs? When I view the music stored on my iMac, I get a choice to view by Songs, Artists, Albums, Composers, etc. But I don't get any choice with the music on my iPhone.
Its really hard to manage the music on my iPhone. I want to quickly remove albums and add new ones.
Is there a solution that I haven't seen?

turboweaver wrote:
When I view the music on my iPhone in iTunes, how do I view this by album, rather than in a long list of songs? When I view the music stored on my iMac, I get a choice to view by Songs, Artists, Albums, Composers, etc. But I don't get any choice with the music on my iPhone.
Its really hard to manage the music on my iPhone. I want to quickly remove albums and add new ones.
Is there a solution that I haven't seen?
Create a playlist, add/delete albums and sync this playlist.
You don't need to manually manage the iPhone music to do this.

My iphone 6 connects to the car via bluetooth, the music works good, but the phone calles does not work. It looks like it is working but doesn't. I have tried in my Hyundai and a Dodge rent car and get the same results. I updated the last 8.0.2.

My iphone 6 connects to the car via bluetooth, the music works good, but the phone calls does not work. It looks like it is working but doesn't. I have tried in my Hyundai Sonata and a Dodge Dart rent car and get the same results. I updated the last 8.0.2. It worked the first day i had the phone, and then i updated to Ios 8.0.2 and it quit working.
Now when i get in the car, it acts like it is connected and makes the same call it was on after syncing to bluetooth, but it really isn't on a call. This is happening on both cars.
Does anyone know if this is the phone and i need to take it to Apple or if there is an issue that Apple is working on getting a fix for?
My son in law has the exact same phone as me, we both got the on 10/6, he had a Dodge Dart and his is working via bluetooth.
Someone HELP please, as i consider this a safety issue by not having my calls go to bluetooth.

We had the same problem, but figure out the solution.
You MUST have at least 1 song added to your ITUNE! After you add a free song, then everything else should work as normal!
Hope this helps!

ITunes will no longer play my music, all the albumss are there but it if I click on a song to play it I get a message saying " The song (name of song) could not be played because the original file coul not be found. Would you like to locate it."

iTunes will no longer play my music, all the albumss are there but it if I click on a song to play it I get a message saying " The song (name of song) could not be played because the original file coul not be found. Would you like to locate it."

You get this message because iTunes can’t find the file. This can happen for a number of reasons:
The song file or a folder in its path was renamed
The song file or the folder it is in has been moved
The song file has been deleted
The device containing the song files e.g. external drive is not accessible or the drive letter has changed.
Do any of these aply to you?

My macbook pro running OS X 10.8.3 freezes when I plug an adapter into the displayport, even when nothing is connected to the other (vga) end. Anyone know a solution?

My macbook pro running OS X 10.8.3 freezes when I plug an adapter into the displayport, even when nothing is connected to the other (vga) end. Anyone know a solution? I have used this adapter with a macbook air and it works flawlessly, but the moment I plug into the minidisplayport the macbook pro freezes with a little spinning color wheel that goes on and on. . .

Hello there, sarhang27753.
First thing that would come to mind to resolve the issue would be SMC and PRAM resets. I've linked Knowledge Base articles below:
SMC
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
PRAM
OS X Mountain Lion: Reset your computer’s PRAM
http://support.apple.com/kb/PH11243
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Hi , I cant use the music bar in the control center I can only change the volume but I cant skip tracks or pause the song or play it. anyone knows the solution or the reason please?

Similar Messages

Maybe you are looking for