I/O Frozen message in the Error logs
I see very often this message, do I need to take care any precautions, is it going to effect in long run?
I/O is frozen on database master. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup.
Hi,
You probably also have something like "I/O was resumed on database master. No user action is required". right?
I am guessing that you have some type of VSS/Snapshot at the same time. There are 2 step while the VSS process that need to frozen the IO, which might result with this error (first step might take till 60 seconds and second till 10 seconds).
You can check the presentation slide 14 the step on that marked in red (7, and 8).
* You might reduce the time if you stop some VSS writers that you do not need.
- Are you using the machine for services other than the SQL Server? If so, then you probably have several VSS writers and that might slowdown these steps.
- How do you backup your databases, is there any backup based on VSS (like VDI backups)?
- are you using snapshot, in any other way?
Ronen Ariely
[Personal Site] [Blog] [Facebook]
Similar Messages
-
Info messages away from error log
Hi,
I'm using iws6.0sp6 and don't know how to get rid of info lines in the error log. They are not interresting.
Can this be done??
I haven't found a way to do this.
I would only like to get warning and critical messages in the error log.
[19/Dec/2003:12:20:13] info (20299): Internal Info: loading servlet /yrityksille
/j_luottolista.jsp
[19/Dec/2003:12:20:13] info (20299): /yrityksille/j_luottolista.jsp: initWeb Server 6.0 does not support this type of log configuration. Werb Server 6.1 does, however.
-
I am suddenly not getting email on my MacBook Pro, but am receiving e-mail on my iPhone. I'm getting message "Warning Recent errors logged" It repeatedly states "The Header From: address <postoffice> is not authorised - please go to control add PHP" But I only have 1 email address. I'm afraid to add anything on since I don't even know what this other e-mail address is. What should I do? And would this definitely be the cause of my not receiving e-mail?
I pressed check again and here is what appeared:
CONNECTED Apr 04 19:03:02.511 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
CONNECTED Apr 04 19:03:02.513 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:587 -- socket:0x1164f4730 -- thread:0x114a5a030
CONNECTED Apr 04 19:03:02.526 [kCFStreamSocketSecurityLevelNone] -- host:smtp.elikann.com -- port:2525 -- socket:0x11444a6a0 -- thread:0x11827f160
READ Apr 04 19:03:02.556 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
+OK <[email protected]>
READ Apr 04 19:03:02.563 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:587 -- socket:0x1164f4730 -- thread:0x114a5a030
220 mail.hostingplatform.com ESMTP
WROTE Apr 04 19:03:02.566 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
CAPA
CONNECTED Apr 04 19:03:02.568 [kCFStreamSocketSecurityLevelNone] -- host:mail.authsmtp.com -- port:2525 -- socket:0x11824ca00 -- thread:0x1176c1ab0
READ Apr 04 19:03:02.572 [kCFStreamSocketSecurityLevelNone] -- host:smtp.elikann.com -- port:2525 -- socket:0x11444a6a0 -- thread:0x11827f160
220 mail.hostingplatform.com ESMTP
WROTE Apr 04 19:03:02.585 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:587 -- socket:0x1164f4730 -- thread:0x114a5a030
EHLO 192.168.1.4
WROTE Apr 04 19:03:02.592 [kCFStreamSocketSecurityLevelNone] -- host:smtp.elikann.com -- port:2525 -- socket:0x11444a6a0 -- thread:0x11827f160
EHLO 192.168.1.4
READ Apr 04 19:03:02.610 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
-ERR authorization first
WROTE Apr 04 19:03:02.628 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
USER [email protected]
READ Apr 04 19:03:02.630 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:587 -- socket:0x1164f4730 -- thread:0x114a5a030
250-mail.hostingplatform.com
250-STARTTLS
250-PIPELINING
250-8BITMIME
250-SIZE 65000000
250 AUTH LOGIN PLAIN CRAM-MD5
READ Apr 04 19:03:02.639 [kCFStreamSocketSecurityLevelNone] -- host:smtp.elikann.com -- port:2525 -- socket:0x11444a6a0 -- thread:0x11827f160
250-mail.hostingplatform.com
250-STARTTLS
250-PIPELINING
250-8BITMIME
250-SIZE 65000000
250 AUTH LOGIN PLAIN CRAM-MD5
WROTE Apr 04 19:03:02.648 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:587 -- socket:0x1164f4730 -- thread:0x114a5a030
AUTH PLAIN (*** 44 bytes hidden ***)
WROTE Apr 04 19:03:02.667 [kCFStreamSocketSecurityLevelNone] -- host:smtp.elikann.com -- port:2525 -- socket:0x11444a6a0 -- thread:0x11827f160
AUTH PLAIN
READ Apr 04 19:03:02.670 [kCFStreamSocketSecurityLevelNone] -- host:mail.authsmtp.com -- port:2525 -- socket:0x11824ca00 -- thread:0x1176c1ab0
220 mail.authsmtp.com ESMTP Sendmail 8.14.2/8.14.2/; Fri, 5 Apr 2013 00:03:02 +0100 (BST)
READ Apr 04 19:03:02.671 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
+OK
WROTE Apr 04 19:03:02.691 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
PASS ************
WROTE Apr 04 19:03:02.698 [kCFStreamSocketSecurityLevelNone] -- host:mail.authsmtp.com -- port:2525 -- socket:0x11824ca00 -- thread:0x1176c1ab0
EHLO 192.168.1.4
READ Apr 04 19:03:02.704 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:587 -- socket:0x1164f4730 -- thread:0x114a5a030
235 ok, go ahead (#2.0.0)
READ Apr 04 19:03:02.712 [kCFStreamSocketSecurityLevelNone] -- host:smtp.elikann.com -- port:2525 -- socket:0x11444a6a0 -- thread:0x11827f160
334
WROTE Apr 04 19:03:02.734 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:587 -- socket:0x1164f4730 -- thread:0x114a5a030
QUIT
WROTE Apr 04 19:03:02.756 [kCFStreamSocketSecurityLevelNone] -- host:smtp.elikann.com -- port:2525 -- socket:0x11444a6a0 -- thread:0x11827f160
QUIT
READ Apr 04 19:03:02.759 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
+OK
WROTE Apr 04 19:03:02.776 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
QUIT
READ Apr 04 19:03:02.799 [kCFStreamSocketSecurityLevelNone] -- host:mail.authsmtp.com -- port:2525 -- socket:0x11824ca00 -- thread:0x1176c1ab0
250-mail.authsmtp.com Hello pool-72-93-40-57.bstnma.east.verizon.net [72.93.40.57], pleased to meet you
250-ENHANCEDSTATUSCODES
250-PIPELINING
250-8BITMIME
250-SIZE 52428800
250-AUTH CRAM-MD5 DIGEST-MD5 LOGIN PLAIN
250-STARTTLS
250 HELP
WROTE Apr 04 19:03:02.808 [kCFStreamSocketSecurityLevelNone] -- host:mail.authsmtp.com -- port:2525 -- socket:0x11824ca00 -- thread:0x1176c1ab0
AUTH PLAIN ********************
READ Apr 04 19:03:02.822 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
+OK
READ Apr 04 19:03:02.907 [kCFStreamSocketSecurityLevelNone] -- host:mail.authsmtp.com -- port:2525 -- socket:0x11824ca00 -- thread:0x1176c1ab0
235 2.0.0 OK Authenticated
WROTE Apr 04 19:03:02.917 [kCFStreamSocketSecurityLevelNone] -- host:mail.authsmtp.com -- port:2525 -- socket:0x11824ca00 -- thread:0x1176c1ab0
QUIT -
Write the Error log from background Job to the Spool request
Hi ,
I have a situation where in i need to capture the error log of a Z program which runs as a background job and write that log into the spool request. My Z program calls runs RSEINB00 program using the SUBMIT statement. When this Job fails the error log can be seen in SM37. But i need this error log to be sent in to a spool.
I can read the error log using the BP_JOBLOG_READ FM and can also create a spool using the RSPO_SPOOL_OPEN FM.
The problem is, when the Submit statement executes, due to internal valdation in the RSEINB00 program the program terminates. Due to this it is not able to perform the SY-SUBRC Check and thus doesn't read the log.
Can anybody suggest me how to overcome this problem. I am attaching the code for your refernece.
SUBMIT RSEINB00
USING SELECTION-SET 'TEST2'
TO SAP-SPOOL
LIST NAME 'LOCL'
IMMEDIATELY space
KEEP IN SPOOL 'X'
AND RETURN.
<b>If sy-subrc <> 0.</b>
CALL FUNCTION 'BP_JOBLOG_READ'
EXPORTING
CLIENT = SY-MANDT
JOBCOUNT = i_tbtco-jobcount
JOBLOG = i_tbtco-joblog
JOBNAME = i_tbtco-jobname
TABLES
JOBLOGTBL = l_joblog
IF SY-SUBRC <> 0.
else.
message i002 with l_joblog-msgv1.
ENDIF.
<b>
ENDIF.</b>
Rgds,
Kewal
P.S. : any other approach to solve this problem will be appreciated too and the points will be rewarded suitably.If I select a job in SM37 and I click on "spool" I get a list with separate spool entries for each of the steps, e. g.
Programmname/Kommand Programmtyp Spoolliste
Z_MM_STAT_UPDATE_WERK ABAP 1707445
ZSLEEP Ext. Kommando
Z_MM_STAT_UPDATE_WERK ABAP 1707459
ZSLEEP Ext. Kommando
Z_MM_STAT_UPDATE_MARA ABAP 1721423
ZSLEEP Ext. Kommando
Z_MM_STAT_UPDATE_WERK ABAP 1721437
Z_MM_STAT_UPDATE_MARA ABAP 1721446
Z_MM_STAT_UPDATE_WERK ABAP 1721447
Z_MM_STAT_UPDATE_VKORG ABAP 1721471
ZSLEEP Ext. Kommando
Z_MM_STAT_UPDATE_VKORG ABAP 1721521
ZSLEEP Ext. Kommando
Z_MM_STAT_UPDATE_VKORG ABAP 1721816
It's in German but I'm sure you get the idea. For each Z_MM_STAT_UPDATE and variant I have a separate spool list that I can display.
Markus -
Messages in the OS logs of Oracle Solaris on SPARC (64-bit)
One of my Customer is getting following messages in the OS logs of the Oracle Solaris on SPARC (64-bit) machine.
Feb 2 01:07:33 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
Feb 2 03:07:43 ndc-m9k-2-r1 scsi: [ID 243001 kern.warning] WARNING: /pseudo/fcp@0 (fcp0):
Feb 2 03:07:43 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
Feb 2 04:07:34 ndc-m9k-2-r1 oracle[7332]: [ID 566193 user.error] n2a get_local_info: ioctl (get interface flags): Interrupted system call
Feb 2 05:07:52 ndc-m9k-2-r1 scsi: [ID 243001 kern.warning] WARNING: /pseudo/fcp@0 (fcp0):
Feb 2 05:07:52 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
Feb 2 07:08:08 ndc-m9k-2-r1 scsi: [ID! 243001 kern.warning] WARNING: /pseudo/fcp@0 (fcp0):
Feb 2 07:08:08 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
Feb 2 09:08:25 ndc-m9k-2-r1 scsi: [ID 243001 kern.warning] WARNING: /pseudo/fcp@0 (fcp0):
Feb 2 09:08:25 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
There is a note # 833665.1 on this which states "The issue is caused by the Host Storage metrics collected by the agent" and also a Patch 8477122 has been created for this issue.
However, there is nothing mention in the Note # 833665.1 about the following one message.
Feb 2 04:07:34 ndc-m9k-2-r1 oracle[7332]: [ID 566193 user.error] n2a get_local_info: ioctl (get interface flags): Interrupted system call
Can anyone please tell me
1. whats the significance of the "oracle[7332]: [ID 566193 user.error] n2a get_local_info: ioctl (get interface flags): Interrupted system call" message in the OS log?
2. Does this message get stops on applying of patch # 8477122 ?
Thank you,
BhavinThere are a number of known issues with the 10g agent on Solaris and patches are available. I assume you are running the 10.2.0.5 agent since you reference patch 8477122. If this is a brand new agent installation i would start with applying the latest PSU update which contains many related fixes. If you are still getting the error after this, open an SR with Oracle Support with your specific error message.
-
How do we print the error logs
hi friends , i want to print the error log file of a bdc session method ,can any one sugest me a answer
Check out this Sample Program
*& Report *
*& This program is to transfer data from flat file to transaction 'FD01'
REPORT zgopi_report
NO STANDARD PAGE HEADING
LINE-SIZE 255
MESSAGE-ID ZRASH.
* Internal Table Declarations *
*--Internal Table for Data Uploading.
DATA : BEGIN OF IT_FFCUST OCCURS 0,
KUNNR(10),
BUKRS(4),
KTOKD(4),
ANRED(15),
NAME1(35),
SORTL(10),
STRAS(35),
ORT01(35),
PSTLZ(10),
LAND1(3),
SPRAS(2),
AKONT(10),
END OF IT_FFCUST.
*--Internal Table to Store Error Records.
DATA : BEGIN OF IT_ERRCUST OCCURS 0,
KUNNR(10),
EMSG(255),
END OF IT_ERRCUST.
*--Internal Table to Store Successful Records.
DATA : BEGIN OF IT_SUCCUST OCCURS 0,
KUNNR(10),
SMSG(255),
END OF IT_SUCCUST.
*--Internal Table for Storing the BDC data.
DATA : IT_CUSTBDC LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*--Internal Table for storing the messages.
DATA : IT_CUSTMSG LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : V_FLAG1(1) VALUE ' ',
"Flag used for opening session.
V_TLINES LIKE SY-TABIX,
"For storing total records processed.
V_ELINES LIKE SY-TABIX,
"For storing the no of error records.
V_SLINES LIKE SY-TABIX.
"For storing the no of success records.
* Selection screen *
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS : V_FNAME LIKE RLGRAP-FILENAME,
V_SESNAM LIKE RLGRAP-FILENAME.
SELECTION-SCREEN END OF BLOCK B1.
* Start-of-selection *
START-OF-SELECTION.
*-- Form to upload flatfile data into the internal table.
PERFORM FORM_UPLOADFF.
* TOP-OF-PAGE *
TOP-OF-PAGE.
WRITE:/ 'Details of the error and success records for the transaction'
ULINE.
SKIP.
* End of Selection *
END-OF-SELECTION.
*-- Form to Generate a BDC from the Uploaded Internal table
PERFORM FORM_BDCGENERATE.
*--To write the totals and the session name.
PERFORM FORM_WRITEOP.
*& Form form_uploadff
* Form to upload flatfile data into the internal table.
FORM FORM_UPLOADFF .
*--Variable to change the type of the parameter file name.
DATA : LV_FILE TYPE STRING.
LV_FILE = V_FNAME.
*--Function to upload the flat file to the internal table.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = LV_FILE
* FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
* HEADER_LENGTH = 0
* READ_BY_LINE = 'X'
* DAT_MODE = ' '
* IMPORTING
* FILELENGTH =
* HEADER =
TABLES
DATA_TAB = IT_FFCUST
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC = 0.
*--Deleting the headings from the internal table.
DELETE IT_FFCUST INDEX 1.
*--Getting the total number of records uploaded.
DESCRIBE TABLE IT_FFCUST LINES V_TLINES.
ENDIF.
ENDFORM. " form_uploadff
*& Form Form_bdcgenerate
* Form to Generate a BDC from the Uploaded Internal table
FORM FORM_BDCGENERATE .
*--Generating the BDC table for the fields of the internal table.
LOOP AT IT_FFCUST.
PERFORM POPULATEBDC USING :
'X' 'SAPMF02D' '0105',
' ' 'BDC_OKCODE' '/00' ,
' ' 'RF02D-KUNNR' IT_FFCUST-KUNNR,
' ' 'RF02D-BUKRS' IT_FFCUST-BUKRS,
' ' 'RF02D-KTOKD' IT_FFCUST-KTOKD,
'X' 'SAPMF02D' '0110' ,
' ' 'BDC_OKCODE' '/00',
' ' 'KNA1-ANRED' IT_FFCUST-ANRED,
' ' 'KNA1-NAME1' IT_FFCUST-NAME1,
' ' 'KNA1-SORTL' IT_FFCUST-SORTL,
' ' 'KNA1-STRAS' IT_FFCUST-STRAS,
' ' 'KNA1-ORT01' IT_FFCUST-ORT01,
' ' 'KNA1-PSTLZ' IT_FFCUST-PSTLZ,
' ' 'KNA1-LAND1' IT_FFCUST-LAND1,
' ' 'KNA1-SPRAS' IT_FFCUST-SPRAS,
'X' 'SAPMFO2D' '0120',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0125',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0130',
' ' 'BDC_OKCODE' '=ENTR',
'X' 'SAPMF02D' '0340',
' ' 'BDC_OKCODE' '=ENTR',
'X' 'SAPMF02D' '0360',
' ' 'BDC_OKCODE' '=ENTR',
'X' 'SAPMF02D' '0210',
' ' 'KNB1-AKONT' IT_FFCUST-AKONT,
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0215',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0220',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0230',
' ' 'BDC_OKCODE' '=UPDA'.
*--Calling the transaction 'fd01'.
CALL TRANSACTION 'FD01' USING IT_CUSTBDC MODE 'N' UPDATE 'S'
MESSAGES INTO IT_CUSTMSG.
IF SY-SUBRC <> 0.
*--Populating the error records internal table.
IT_ERRCUST-KUNNR = IT_FFCUST-KUNNR.
APPEND IT_ERRCUST.
CLEAR IT_ERRCUST.
*--Opening a session if there is an error record.
IF V_FLAG1 = ' '.
PERFORM FORM_OPENSESSION.
V_FLAG1 = 'X'.
ENDIF.
*--Inserting the error records into already open session.
IF V_FLAG1 = 'X'.
PERFORM FORM_INSERT.
ENDIF.
*--Populating the Success records internal table.
ELSE.
IT_SUCCUST-KUNNR = IT_FFCUST-KUNNR.
APPEND IT_SUCCUST.
CLEAR IT_SUCCUST.
ENDIF.
*--Displaying the messages.
IF NOT IT_CUSTMSG[] IS INITIAL.
PERFORM FORM_FORMATMSG.
ENDIF.
*--Clearing the message and bdc tables.
CLEAR : IT_CUSTBDC[],IT_CUSTMSG[].
ENDLOOP.
*--Getting the total no of error records.
DESCRIBE TABLE IT_ERRCUST LINES V_ELINES.
*--Getting the total no of successful records.
DESCRIBE TABLE IT_SUCCUST LINES V_SLINES.
*--Closing the session only if it is open.
IF V_FLAG1 = 'X'.
PERFORM FORM_CLOSESESS.
ENDIF.
ENDFORM. " Form_bdcgenerate
*& Form populatebdc
* FOrm to Populate the BDC table.
FORM POPULATEBDC USING VALUE(P_0178)
VALUE(P_0179)
VALUE(P_0180).
IF P_0178 = 'X'.
IT_CUSTBDC-PROGRAM = P_0179.
IT_CUSTBDC-DYNPRO = P_0180.
IT_CUSTBDC-DYNBEGIN = 'X'.
ELSE.
IT_CUSTBDC-FNAM = P_0179.
IT_CUSTBDC-FVAL = P_0180.
ENDIF.
APPEND IT_CUSTBDC.
CLEAR IT_CUSTBDC.
ENDFORM. " populatebdc
*& Form FORM_OPENSESSION
* Form to Open a session.
FORM FORM_OPENSESSION .
*--Variable to convert the given session name into reqd type.
DATA : LV_SESNAM(12).
LV_SESNAM = V_SESNAM.
*--Opening a session.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = LV_SESNAM
HOLDDATE = '20040805'
KEEP = 'X'
USER = SY-UNAME
PROG = SY-CPROG
* IMPORTING
* QID =
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11
IF SY-SUBRC <> 0.
WRITE :/ 'Session not open'.
ENDIF.
ENDFORM. " FORM_OPENSESSION
*& Form FORM_INSERT
* fORM TO INSERT ERROR RECOED INTO A SESSION.
FORM FORM_INSERT .
*--Inserting the record into session.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'FD01'
* POST_LOCAL = NOVBLOCAL
* PRINTING = NOPRINT
* SIMUBATCH = ' '
* CTUPARAMS = ' '
TABLES
DYNPROTAB = IT_CUSTBDC
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7
IF SY-SUBRC <> 0.
WRITE :/ 'Unable to insert the record'.
ENDIF.
ENDFORM. " FORM_INSERT
*& Form FORM_CLOSESESS
* Form to Close the Open Session.
FORM FORM_CLOSESESS .
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
ENDIF.
ENDFORM. " FORM_CLOSESESS
*& Form FORM_FORMATMSG
* Form to format messages.
FORM FORM_FORMATMSG .
*--Var to store the formatted msg.
DATA : LV_MSG(255).
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = SY-MSGID
LANG = SY-LANGU
NO = SY-MSGNO
V1 = SY-MSGV1
V2 = SY-MSGV2
V3 = SY-MSGV3
V4 = SY-MSGV4
IMPORTING
MSG = LV_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WRITE :/ LV_MSG.
ENDIF.
ULINE.
ENDFORM. " FORM_FORMATMSG
*& Form form_writeop
* To write the totals and the session name.
FORM FORM_WRITEOP .
WRITE :/ 'Total Records Uploaded :',V_TLINES,
/ 'No of Error Records :',V_ELINES,
/ 'No of Success Records :',V_SLINES,
/ 'Name of the Session :',V_SESNAM.
ULINE.
ENDFORM. " form_writeop -
Hi,
We are just testing ECC 6.0 where for depreciation AFABN is used instead of AFAB.
However when I run the depreciation in test run it never includes any assts and it says 'Refer to the error log'. But I cannot find anything in ST22.
Can you help where the errorlog can be found?
Are there any differences between AFAB and AFABN?
Thx,
JanI had the same problem recently and in the Job Log it states no Errors. If when you run the depreciation you select test run but not "Error Analysis" then you will find will give you the list of Assets.to be posted. It does seem that when this is ticked it does give incorrect error message in the payment run for some reason I don't know what the benefit of this error analysis tab is! Hope this helps.
-
Hide message 'N messages. Goto error log?'
Hi,
Example:
I use ICCMP_BP_SEARCH for search partners (accounts).
I enter wrong data to search.
Message show: '2 messages. Goto error log?'
This message is reduce performance agents, when it's work with Web UI.
This message is appears at another component/operation too.
How I can hide (deactivate / not show) this pop-up message?
Denis.Hi Denis,
You can enhance the search method. Put a break point at cl_bsp_wd_message_service=>get_instance or cl_bsp_wd_message_service=>ADD_MESSAGE and you will see where the message is set .
Best Regards,
Caíque Escaler -
Error in loading the WSDL file. Check the error log for more details
Hello,
I am trying to create a Import Adaptive Webservice Model. I am using the WSDL:
http://www.abysal.com/soap/AbysalEmail.wsdl
I am getting the below error when I choose WSDL source as UDDI or file (I am not using any logical destination)
"Error in loading the WSDL file. Check the error log for more details."
Where can i see the error log? And what is the solution to fix this?
I am able to create the model if i save the wsdl locally on my machine and choose Local File System or File as the WSDL source. But at runtime this fails as the application tries to read the WSDL for metadata info and it looks into the application server for this file.
I also tried creating the old webservice model. And it is able to create the model. But I feel I need to use the new model as this one is deprecated.
Thanks,
SachinHi
For the logs you can search in this directory
Goto Window->Show view->Other->PDE Runtim->Error Log
please try this may it would help you out, try to create a model for you Web Service using Web Service Model (DEPRECATED)
See this link:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/integration%2bof%2bweb%2bservices%2b-%2bdifferent%2bscenarios -
Can I reduce the message in the alert log ?
Hi All,
I receive lot of message in my alert log. Can I reduce the message in the alert log ? please help me
Tue Sep 12 13:53:45 2006
ARC0: received prod
Tue Sep 12 13:56:13 2006
LGWR: prodding the archiver
Thread 1 advanced to log sequence 2105494
Tue Sep 12 13:56:13 2006
Current log# 4 seq# 2105494 mem# 0: E:\ORACLE\MMP\LOG\REDO04.LOG
Current log# 4 seq# 2105494 mem# 1: C:\ORACLE\MMP\LOG\REDO04.LOG
Tue Sep 12 13:56:14 2006
ARC1: received prod
Tue Sep 12 13:56:14 2006
ARC1: Beginning to archive log# 3 seq# 2105493
ARC1: Completed archiving log# 3 seq# 2105493
ARC1: re-scanning for new log files
ARC1: prodding the archiver
Tue Sep 12 13:56:18 2006
ARC0: received prod
Tue Sep 12 13:58:26 2006
LGWR: prodding the archiver
Thread 1 advanced to log sequence 2105495
Tue Sep 12 13:58:26 2006
Current log# 1 seq# 2105495 mem# 0: C:\ORACLE\MMP\LOG\REDO01.LOG
Current log# 1 seq# 2105495 mem# 1: E:\ORACLE\MMP\LOG\REDO01.LOG
Tue Sep 12 13:58:27 2006
ARC1: received prod
Tue Sep 12 13:58:27 2006
ARC1: Beginning to archive log# 4 seq# 2105494
ARC1: Completed archiving log# 4 seq# 2105494
ARC1: re-scanning for new log files
ARC1: prodding the archiver
Tue Sep 12 13:58:31 2006
ARC0: received prodHi,
The Oracle database writes an audit trail of the archived redo log files received from the primary database into a trace file. This parameter specifies the level of trace that should be generated when redo logs are archived. The value of the parameter indicates the level of trace to be generated.
Level Description
0 Disabled (default)
1 Track archival of redo log file
2 Track status of each archivelog destination
4 Track archival operational phase
8 Track archivelog destination activity
16 Track detailed archivelog destination activity
32 Track archivelog destination parameter changes
64 Track ARCn process state activity
128 Track FAL server related activities
It can be used in a Primary Database or Standby Database
for more details see:
http://docs.nojabrsk.ru/sol10/B12037_01/server.101/b10823/trace.htm
Cheers -
I have created an RDL file programatically. When I execute the code I get the error as mentioned below:
Error: Sub report cannot be shown.
An internal error occurred on the report server. See the error log for more details. (rsInternalError)
When I copy and paste the code of RDL file into new RDL file and try to preview the output I get correct result.
Note: The new RDL file does not give any error if the output is seen using preview tab but it gives the error only when executed from report viewer or from internet explorer.
Any Suggestion/feedback is highly appreciated.
Thank You.
The code of the sample RDL is shown below:
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<DataSources>
<DataSource Name="DataSource1">
<DataSourceReference>DataSource1</DataSourceReference>
<rd:DataSourceID>fe4806ee-0358-4a87-b764-ac5de049545e</rd:DataSourceID>
</DataSource>
</DataSources>
<BottomMargin>0.25in</BottomMargin>
<RightMargin>0.25in</RightMargin>
<PageWidth>11in</PageWidth>
<ReportParameters>
<ReportParameter Name="machine_id">
<DataType>String</DataType>
<Prompt>machine_id</Prompt>
</ReportParameter>
<ReportParameter Name="from_date">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>From Date</Prompt>
</ReportParameter>
<ReportParameter Name="to_date">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>To Date</Prompt>
</ReportParameter>
</ReportParameters>
<rd:DrawGrid>true</rd:DrawGrid>
<InteractiveWidth>8.5in</InteractiveWidth>
<rd:SnapToGrid>true</rd:SnapToGrid>
<Body>
<ReportItems>
<Table Name="table1">
<DataSetName>Main_Report</DataSetName>
<TableGroups>
<TableGroup>
<Header>
<TableRows>
<TableRow>
<TableCells>
<TableCell>
<ReportItems>
<Textbox Name="textbox2">
<rd:DefaultName>textbox2</rd:DefaultName>
<ZIndex>1</ZIndex>
<Style>
<TextAlign>Left</TextAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingBottom>2pt</PaddingBottom>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<CanGrow>true</CanGrow>
<Value>=Fields!syscode.Value</Value>
</Textbox>
</ReportItems>
</TableCell>
</TableCells>
<Height>0.25in</Height>
</TableRow>
</TableRows>
<RepeatOnNewPage>true</RepeatOnNewPage>
</Header>
<Grouping Name="table1_Group1">
<PageBreakAtEnd>true</PageBreakAtEnd>
<GroupExpressions>
<GroupExpression>=Fields!syscode.Value</GroupExpression>
</GroupExpressions>
</Grouping>
</TableGroup>
</TableGroups>
<Details>
<TableRows>
<TableRow>
<TableCells>
<TableCell>
<ReportItems>
<Subreport Name="subreport1">
<Parameters>
<Parameter Name="machine_id">
<Value>=Fields!machine_ip.Value</Value>
</Parameter>
<Parameter Name="syscode">
<Value>=Fields!syscode.Value</Value>
</Parameter>
<Parameter Name="from_date">
<Value>=Parameters!from_date.Value</Value>
</Parameter>
<Parameter Name="to_date">
<Value>=Parameters!to_date.Value</Value>
</Parameter>
</Parameters>
<ReportName>Holding_Summary_Multi_Period</ReportName>
</Subreport>
</ReportItems>
</TableCell>
</TableCells>
<Height>0.25in</Height>
</TableRow>
</TableRows>
</Details>
<TableColumns>
<TableColumn>
<Width>10.5in</Width>
</TableColumn>
</TableColumns>
<Height>0.5in</Height>
</Table>
</ReportItems>
<Height>0.75in</Height>
</Body>
<rd:ReportID>d0a1293a-e98c-4f75-9597-03426d2e7218</rd:ReportID>
<LeftMargin>0.25in</LeftMargin>
<DataSets>
<DataSet Name="Main_Report">
<Query>
<rd:UseGenericDesigner>true</rd:UseGenericDesigner>
<CommandText>select account_syscode as syscode , 'display Name' as display_name , * from mars_customer_list
where machine_ip = @machine_id</CommandText>
<QueryParameters>
<QueryParameter Name="@machine_id">
<Value>=Parameters!machine_id.Value</Value>
</QueryParameter>
</QueryParameters>
<DataSourceName>DataSource1</DataSourceName>
</Query>
<Fields>
<Field Name="syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>syscode</DataField>
</Field>
<Field Name="display_name">
<rd:TypeName>System.String</rd:TypeName>
<DataField>display_name</DataField>
</Field>
<Field Name="customer_syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>customer_syscode</DataField>
</Field>
<Field Name="account_syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>account_syscode</DataField>
</Field>
<Field Name="machine_ip">
<rd:TypeName>System.String</rd:TypeName>
<DataField>machine_ip</DataField>
</Field>
</Fields>
</DataSet>
</DataSets>
<Code>Shared offset As Integer
Public Function GetPN(reset As Boolean, pagenumber As Integer) As Integer
If reset
offset = pagenumber - 1
End If
Return pagenumber - offset
End Function
</Code>
<Width>10.5in</Width>
<InteractiveHeight>11in</InteractiveHeight>
<Language>en-US</Language>
<PageFooter>
<ReportItems>
<Image Name="image1">
<Sizing>Fit</Sizing>
<Left>8.875in</Left>
<MIMEType />
<Width>1.5in</Width>
<Source>External</Source>
<Style />
<Value>bottom_right_logo.gif</Value>
</Image>
</ReportItems>
<Height>0.5in</Height>
<PrintOnLastPage>true</PrintOnLastPage>
<PrintOnFirstPage>true</PrintOnFirstPage>
</PageFooter>
<TopMargin>0.5in</TopMargin>
<PageHeight>8.5in</PageHeight>
</Report>i created a SSRS report with shared datasets and uploaded rdl files and rsd files , while trying to map rdl file with data sets i am getting an error
when i click on manage for .rdl file, its throwing error , as
"An internal error occurred on the report server. See the error log for more details. (rsInternalError)
Object reference not set to an instance of an object.
please help me with this -
How can we create the error log in a ABAP program
Hi all,
How can we create the error log in a ABAP program
Thanks,
srinivas.Hi,
Refer to FM's in the Function Group SBAL. For a change most of the FM's have been well documented. Also have a look at the DEMO pgms. Se38---->SBALDEMO & F4.
Regards
Raju Chitale -
Can text messages in the incompletion log be found in any table?
We need to store and review the text messages found in the online incompletion log. Does anyone know if these are stored in a table? Or if they are always redetermined upon VA01 or VA02 transactions, does anyone know at what point in what program this happens if we need to build our own custom table to capture the messages?
The incompletion log table is VBUV - Sales Document: Incompletion Log
I think the table is filled in one of the following:
> Function module - RV_CHECK_DOCUMENT_INPUT
> Include - LV45FFUV: FORM FEHLER_BESTIMMEN
I hope this helps.
Gerard
P.s. Also look for structure VBUV_TAB as I think XVBUV comes for here.
Edited by: Gerard Magorrian on Oct 1, 2010 9:04 PM -
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)
while proview the report i will get this error am using sql server 2008R2,
can u plesae hlep me out for this
<Header>
<Product>Microsoft SQL Server Reporting Services Version 2009.0100.1600.01 ((KJ_RTM).100402-1539 )</Product>
<Locale>English (United States)</Locale>
<TimeZone>W. Europe Standard Time</TimeZone>
<Path>C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\Logfiles\ReportServerService__01_30_2015_03_09_32.log</Path>
<SystemName>WEGDACM1</SystemName>
<OSName>Microsoft Windows NT 6.1.7601 Service Pack 1</OSName>
<OSVersion>6.1.7601</OSVersion>
<ProcessID>4880</ProcessID>
<Virtualization>Hypervisor</Virtualization>
</Header>
rshost!rshost!5e4!01/30/2015-03:09:32:: i INFO: Currently registered url http://+:80/ReportServer_MSSQLSERVEREPORT/ on endpoint 2
rshost!rshost!5e4!01/30/2015-03:09:32:: e ERROR: Failed to register url=http://+:80/Reports/ for endpoint 3, error=b7.
rshost!rshost!5e4!01/30/2015-03:09:32:: w WARN: Endpoint 3 is enabled but no url is registered for vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportManager.
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: e ERROR: Error creating HTTP endpoint. System.Runtime.InteropServices.COMException (0x800700B7): Cannot create a file when that file already exists. (Exception from HRESULT: 0x800700B7)
at Microsoft.ReportingServices.HostingInterfaces.IRsUnmanagedCallback.CreateHttpEndpoint(RsAppDomainType application, String[] urlPrefixes, Int32 cPrefixes, String[] hosts, Int32 cHosts, Boolean wildCardPresent, String virtualDirectory, String
filePath, Int32 authType, Int32 logonMethod, String authDomain, String authRealm, Boolean authPersist, Int32 extendedProtectionLevel, Int32 extendedProtectionScenario, Boolean enabled)
at Microsoft.ReportingServices.Library.ServiceAppDomainController.SetWebConfiguration(RunningApplication rsApplication, Boolean enabled, String folder)
rshost!rshost!65c!01/30/2015-03:09:32:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer_MSSQLSERVEREPORT/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportServer\ReportBuilder.
rshost!rshost!1e30!01/30/2015-03:09:32:: i INFO: Derived memory configuration based on physical memory as 16776696 KB
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: i INFO: Recycling the service from the default domain
rshost!rshost!1e30!01/30/2015-03:09:46:: i INFO: Application domain type WindowsService statistics: created: 7, unloaded: 7, failed: 0, timed out: 0.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:46:: i INFO: Appdomain:11 WindowsService_7 started.
library!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
servicecontroller!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Error initializing configuration from the database: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
resourceutilities!WindowsService_7!1e30!01/30/2015-03:09:47:: i INFO: Reporting Services starting SKU: Enterprise
servicecontroller!WindowsService_6!1e30!01/30/2015-03:09:47:: i INFO: Service controller exiting.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 unregistered.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 WindowsService_6 unloading.
appdomainmanager!DefaultDomain!1f40!01/30/2015-03:09:47:: i INFO: AppDomain:10 0 pending unload(s)
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Attempting to start service again...
library!DefaultDomain!202c!01/30/2015-08:04:43:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:25:26:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:26:16:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
The above is my log file pls find it resolve my problem,am trying to add the encryption key to my configuration seetings it will through the error like The profile you were used is temporary profile. -
Name of the database tables where the error log (SM35) values are present
Hi,
I want to know the database tables which contains the values of the error log present in SM35.
Plz help me out.Hi,
Check out for APQI Table with
GROUPID
PROGID
QSTATE
CREATOR
MSGCNTE
APQL Batch Input Log Directory
Regards
Bala Krishna
Edited by: Bala Krishna on Feb 11, 2009 3:45 PM
Maybe you are looking for
-
Error in rendering root for dialog
Hello experts, After netweaver 2004 s - SPS 15, we have a issue with our planning application (BI- integrated planning) / variables. For all our planningsfunctions with a VARV command in it, the java.lang.NullPointerException occurs. SAP Note 1134947
-
Photoshop CS4 has started crashing a year after it was installed on a Windows 8.1 laptop
I installed Adobe Creative Suite 4 Design Premium on a laptop running Windows 8.1 a little over a year ago, and have been using Photoshop consistently since then with no issues. Starting a few days ago, Photoshop has begun continually crashing. It
-
Version share statistics for OS X 10.5 vs OS X 10.6 ?
Hello, I'm interested if anyone has current data for the install base of 10.5 vs 10.6? Best Regards, NetworkGenie11
-
Intel Xserve and kernel panic on high I/O load
Hi everyone, Having added our 1st Intel Xserve to our server farm for test purposes we have encoutered several kernel panics on high I/O loads to Xsan volumes and standalone Xraid's. Below is a portion of the system.log after restart. The amusing par
-
How to transfer mp4 file to iphone 5c
how to transfer mp4 file to iphone 5c?