I purchased a second express to use a extender. not sure how to set it up to for airplay to run off of the original air play from 1st express,
need help setting up second express as a range extender for my air play from 1st station which is up stairs and plugged into my home theater?????
I'm a great believer in the KISS principle.
Configuration is simple if you start from a factory default condition. Then connect the Airport to AC power and finally to the Internet modem (or modem/router). Open Airport Utility on your Mac or other computer and accept all of the recommendations EXCEPT as noted on the first graphic below. After confirming that it works, insert your desired administrative and WiFi passwords. AirPlay is a separate selection. Refer to second graphic below.
Do not expect the Airport to respond instantly to the configuration commands. BE PATIENT!
Similar Messages
-
Things have just kind of escalated. We started with the ipad and she really liked it. Then we were given an itv and it worked so nicely with the ipad, that we decided to get her an iphone. We've been buying music, tv shows, movies, taking photos, looking at them on the tv using photostream. But now I'm getting an iphone and plan to by a macbook or mac mini some time soon, and I'm wondering how I can setup my own account but still have all this really nice seamless sharing across devices. If I buy an album on my phone, I'd like to be able to play it on the itv (which is setup with my wifes account). And so forth.
I hope I've explained my concern and someone can point out how to set things up so that things remain as seamless and easy as they are now.
Thanks.Have a look here...
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
SHARING iTunes MUSIC
http://macmost.com/five-ways-to-share-music-in-itunes.html
Also... Create your Own Apple ID for Your iPhone...
It should be Noted that anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
Apple ID FAQs > http://support.apple.com/kb/HT5622
And... Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
See Here for > How to Use Multiple iDevices with One Computer
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha -
Hi everyone
I am wanting to create music playlists for free via itunes in the form of a podcast of gym sort of music that can be used by people to listen to whilst working out. Can someone tell me if this is legal to use other peoples music, or songs and change them slightly so they blend into a continuous podcast?? thanksTo The Fit Guy,
Absolutely - 100% - NO!!!!!
You can not take any RIAA / big label music and use it in a podcast.
A Podcast is a download and downloads are looked at legally as a mechanical copy.
Just because you purchased a song - it does not give you any rights what so ever to use that in a podcast.
On top of that - you can not even get licenses for Podcasts to use the music. As the Soundexchange license used for streaming music does NOT cover downloads.
And even if you could get licenses - one of them is working with the Harry Fox agency - they cover mechanical copies - and it is $0.091 per download (copy) for each song. So if you have a mix of 10 songs in an episode - you would need to pay Harry Fox agency $0.91 per download.
The only music you can use in a podcast is music considered "Podsafe"
http://en.wikipedia.org/wiki/Podsafe
Regards,
Rob W
podCast411 -
I need some help with my icloud, i have data that i no longer use and dont know how to delete it off my iphone or itunes, help please. im not to good with computer so please make instructions as easy as possible, thank you...
Hello, sweeper123.
Thank you for the question. The articles below will help you in managing your iCloud storage. The first article covers what information is backed up. The second article will walk you through how to manage your iCloud storage.
iCloud: Backup and restore overview
http://support.apple.com/kb/HT4859
iCloud: Managing your iCloud storage
http://support.apple.com/kb/ht4847
Cheers,
Jason H. -
My airport express light is flashing orange, not sure how to fix this, can someone assist pls?
my airport express light is flashing orange
can someone help to fix this? pleaseOpen AirPort Utility - it's in your Mac's Utilities folder. Click the amber dot. It will tell you the reason it's asking for attention.
-
how do I set up my airport to make a connection with my Hp? I already have it set up for my mac laptop just not sure how to set it up so that theres also a connection with my Hp
I set up my new HP Descjet 3054A . I had a problem becouse Apple give me CD as a driver. The thing was that CD wasn good for this printer becouse it was old software:) I had to go to Apple store so the specialist had to download me he wright driver. Becouse I didnt wannet to screw this up . When he downloaded driver I fired it up at house and thingworks perfect. The thing is when you download all the software from HP side . Then you have to connect your MAC to printer via USB . Fallow the instructions it should works. Worked for me. Good Luck!
-
Can anyone help me figure out how to sync my ipod with my purchased music? I have used several computer and at one point synced my ipod with a computer that only had about half of my music. My other computers are no longer working. Not sure how to get my purchased music back onto my ipod?
Hi kimcinma!
Your previous purchases are saved on iCloud even if you bought them on another computer. If you can't find them on your current computer, you might need to unhide them. Go to iTunes preferences, and click on Store Preferences. Then click the box for "show iTunes in the Cloud purchases". Then click on OK, and everything you've ever bought from iTunes on that Apple ID will show up in your library. You will need to download them from iCloud first before you can synch them to your iPod Classic. To do this, click on the little cloud with the arrow in it next to your song, and it will download to your computer. When you have the music that you want downloaded, plug in your iPod and synch away. Hope this helps!
Sandygirl -
I used to have over 600 songs in my library- 50 or so puchased via i tunes and the rest painstakingly uploaded from CD's over the years. Since signing up to i cloud the only songs are the ones purchased. Have the others permanently gone?
If I take the time to upload them all again will the same thing happen?Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If still problem try on a another computer to help determine if computer or iPod problem.
The take action accordingly. If iPod then get Apple to exchange it at no cost. -
Can my Airport Express be used to extend the signal for an iPad2
I am using a Linksys wired router as the beginning of my home network. There is an ethernet cable running from it through a wall to the Xbox 360 and an Airport Express serving as the base for the wireless network. I have an iBook on the other side of the wall and about 10 feet and an iMac about 20 feet with one wall in between. These two have some fluctuation in their signal but only between 4 bars and 3. I just got an iPad 2 and it is causing me grief because it struggles to maintain a connection just another 10 feet from the iBook. If I put it next to the iMac when it has full 4 bars the iPad gets maybe 2. The iPad has full bars if next to the router. That kind of defeats the purpose of buying an iPad. So, my question is how to rearrange the network so the iPad is happy in the living room where I mostly use it. I had considered moving the iMac and using it as a base station to free the Airport Express for other duty but where I want to move it is further away from the living room. Right now the Airport is wired to the router. Is this necessary for it to be a part of the network? I know I can use it to get music from iTunes to speakers but would that placement also work as a wireless extender? Would just buying another router for the Xbox location and putting the Airport there also be a better solution?
ladybastet, let's clean up some terminology. You should designate only one router for your network. At present that is the Linksys. Your wireless access point is the Express, and it gets its network connection from the Linksys. Is that correct?
If I put it next to the iMac when it has full 4 bars the iPad gets maybe 2. The iPad has full bars if next to the router.
Now that you know your Linksys is the router, is the above correct? Unless the Linksys is also a wireless access point, the iPad's proximity to it will not matter. Only its proximity to the device creating the wireless network is a factor. In your case, I believe that is the Express.
There is an ethernet cable running from it through a wall to the Xbox 360 and an Airport Express serving as the base for the wireless network.
I'm not sure I understand. Is one Ethernet cable going to two places? What is it connected to, precisely?
Right now the Airport is wired to the router. Is this necessary for it to be a part of the network?
In the case of a wired router, yes.
I'm wondering if you have things configured properly, particularly if you have configured the iMac to share its network connection over AirPort. I'm even wondering if your iPad has unintentionally joined a neighbor's wireless network.
I had considered moving the iMac and using it as a base station to free the Airport Express for other duty but where I want to move it is further away from the living room.
Using the iMac to share a wired Ethernet connection to create its own wireless network is certainly possible, but it is less than ideal. For one, the iMac would have to be powered on all the time.
You do not need or want another router.
It is impossible for me to be certain of your network environment (meaning, the size and configuration of your home, the proximity of competing wireless networks, the number of network devices, and the potential for interference) but you might be better off replacing the wired Linksys router with an AirPort Extreme. That would give you the ability to create a "roaming network" or to use your Express to extend the Extreme's wireless network. I think this would be the easiest solution, but given the uncertainly of your description this expense may not be necessary.
Much of my confusion stems from your original question: "Can my Airport Express be used to extend the signal for an iPad2" - the quick answer is yes, but a prerequisite question is, "what signal?" The only "signal" I can determine that may be relevant is the one created by the Express. Once we have the terminology fixed, perhaps we can fix what's wrong with your network. -
I use the operating system Mac os x 10.10.2 and would like me like to purchase Adobe Photoshop Elements 13 am with but not sure because is specified in the system requirement only os x 10.9. Can you help me?
Yes, it works. Download the trial and see for yourself. Adobe never updates the system requirements after any version is released, so that is what was available last Sept. when PSE 13 was released.
-
I'm trying to make "Stop motion videos" in Final Cut EXPRESS by using 100's of still photos and setting them to music. They are coming out blurry if viewed larger than 4x6 in size.
I don't understand why this is happening.Quick follow up, since I was on my phone earlier and am back to a real keyboard.
To access Easy Setup, hit Control Q.
If you click on the blue discosure triangles, a dropdown menu with about a dozen different presets will be displayed. Select the one you want, (Here, I've selected 720P.)
Whatever you select for a preset will not be applied until you make a new sequence. (I don't like to have sequences with different properties in the same project so I prefer to make a new project if I change the Easy Setup.)
Because photo aspect ratios are different than video, I typically put a solid generator of some compatible color on the first track (v1) and put my photos on the track above (v2). Looks better, IMO, than black bars. There are other creative ways to display them. And of course, you could scale them up to fill the frame…but then you probably would have to re-position them.
Good luck.
Russ -
How to set up automatic payment for the purchase order
Hi, All,
I have one question how to set up automatically payment for the Rent Office purchase Order?
There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
Thanks in advanceEither you can set up ERS or you can pay directly from the FI side.
Prerequisites
Evaluated receipt settlement must be flagged in the purchase order item.
The vendor must be flagged as being subject to ERS in the vendor master record.
The goods receipt must refer to a purchase order.
Goods-receipt-based Invoice Verification must be defined for the purchase order item.
A tax code must have been maintained in the purchase order item.
The order price of the materials may not be an estimated price.
If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
In Purchasing, you can delete the default ERS indicator in a purchase order item.
Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
The selection screen appears.
You can use the following criteria to narrow down selection of the transactions to be settled:
Company code
Plant
Goods receipt posting date
Goods receipt document
Fiscal year of the goods receipt
Vendor
Purchase order and order item
You can define the selection criteria for the invoice documents by:
Delivery
Purchase order
Purchase order item
Goods receipt document
Credit memo
Invoice
Currency
Choose Execute.
The system issues a log for Evaluated Receipt Settlement, which displays the following:
Settled
In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
Could not be settled
In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
Select the item and choose Exclude from ERS.
The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
You can display the following environment information for the order items selected. To do this, choose Goto ®:
Display purchase order
Display invoice
Display material document
Display long text -
To add to my original question: I had a 1st generation ipad and 32GB was more than enough storage now I'm having trouble making movies, adding media, etc. I have bought another 15GB of storage on I cloud. Can I put all of my apps on i cloud?
I'm going to be taking an overseas flight and wanted to rent a bunch of movies but I'm not sure how to do that.
I would be grateful for any help
sherrislpTo answer your question, you could remove your apps and then download them again as needed. Your purchased apps are part of what is stored in iCloud and purchased apps do not count against the allotment anyway - As far as I know.
You would want to backup to iCloud before you delete the apps. If it were me, I would also back up and sync with iTunes - I still use iTunes and I back up to both iCloud and iTunes.
The suggestion that James made would be OK for bringing the movies with you on the trip .... But you need to be able to use WiFi in order to use the device and the way that I read your question, you want to download movies to watch on the flight. So that will not work on the airline flight. It would store the content for later viewing but won't work on the flight. That is my understanding of the GoFlex drive, but you would have to investigate it further.
http://www.seagate.com/external-hard-drives/portable-hard-drives/wireless/goflex -satellite/?cmpid=ppc-_-satellite-_-g-_-us-_-goflex_satellite-_-p -
I need to program a Hittite Fractional-N Synthesizer Evaluation Kit with a HMC702LP6CE an external YIG oscillator. Not sure how to use Labview to control the PLL.
Here is how to use the PLL. But I don't know of how to interact with that device
http://zone.ni.com/devzone/cda/tut/p/id/3781
And for thouse who don't know what a PLL is a free bonus link is here:
http://digital.ni.com/public.nsf/allkb/07BC8D77D4E9AE258625708B007CE74F?OpenDocument
and a second one on what that device is: http://www.hittite.com/products/view.html/view/HMC702LP6CE
Now we are all caught up to speed.
Sam S
Applications Engineer
National Instruments -
How do I use cookies to control which part of the timeline to play from?
Hi there,
I have created an animation with Adobe Edge. My site uses Concrete5 and I am pulling in the Edge content into an IFRAME on my home page (there my be a better way to do this and I'm open to suggestions). I want the animation to play from the start when someone first visits the site, but if during their browser session they navigate back to the home page, I want the animation to only play a shorter segment of frames near the end.
My question is, how do I use cookies to acheive this? I'm new to javascript/jquery.
I've included the following code on compositionReady, (found in another post on this forum) but don't have a clue how to continue...
// insert code to be run when the composition is fully loaded here yepnope( { nope:[ '/js/jquery.cookie.js' ], complete: init } ); function init() { //create your cookie's initial values here }
My temp site is here - http://79.170.40.43/nutcrackerdesign.co.uk/
On revisting the homepage, I only want to play from when the green 'How can we help?' button drops in.
Many thanks!
RussHi, Russ-
I found this article, which seemed really helpful in describing how cookies work in JavaScript:
http://www.quirksmode.org/js/cookies.html
Remember that JS works just fine within Animate, so on your compositionReady, you can read your cookie and then set the play based on that. You should probably uncheck the autoplay for your Stage and control the play of your Stage from the compositionReady.
Good luck!
-Elaine
Maybe you are looking for
-
Pavilion dv5 2035dx - reinstalling after replacing hard drive
My hard drive in my Pavilion dv5 2035dx failed -every test imaginable and I could not get Windos 7 to load. I purchased a replacement drive that is an exact dupilcate of the original Toshoba 500 and installed in my laptop. I was not too concerned s
-
AFTER TYPING INCORRECT PASSCODE MULTIPLE TIMES MY PHONE GOT DISABLED. IT SAYS CONNECT TO ITUNES BUT ON CONNECTING IT SAYS USB DEVICE NOT FOUND.
-
Hi everyone! I have been running COD4 on my iMac 20inch Core Duo 2.0Ghz, 2GB RAM through Boot Camp on XP for a while now. Game if fully complete, both on Multiplayer and Single player. I've never been able to have the graphics up particularly high, a
-
WAD drag and drop with table and graphs
Dear Experts I create a web template with chart and query. I have problem with drag and drop when I change the visualization of the template. If I create a template with graph open I can add free characteristics only if the graph is open. If I want c
-
Query not Opening using Bex Analyzer
Hi Experts, We have developed queries in Designer, and we can execute them from query designer. But if we try to run the query from Bex Analyzer no query output comes. Output comes as No Data Available. This issue is happening from past 3 days..befor