I receive message "you cannot buy because your account is disable"

I have a promblem when I updated or load APP. in App Store.
System will show message " You cannot buy because your
account is disable ". This problem show in last 2 days .
Best regard
Aryuratas C

drsoram wrote:
I just got a new IPAD. I am on Windows 7
I have an itunes account for my Ipod Touch and can download and buy apps with no problem.
However on my new IPAD, when I try to buy and app I get an error message that says " You cannot buy because your account it disabled"?
What does that mean and why is my account disable on the new IPAD but works fine on my Ipod Touch?
thank you
Just make sure you've put in the right email address and password. If you have, then contact Apple. I'm sure they'll help you straight away.

Similar Messages

"Cannot buy because your account is disabled"

I keep getting this error even though my account is fine on reg itunes. Any else experiencing this on their iphone when trying to buy an app??
thanks

drsoram wrote:
I just got a new IPAD. I am on Windows 7
I have an itunes account for my Ipod Touch and can download and buy apps with no problem.
However on my new IPAD, when I try to buy and app I get an error message that says " You cannot buy because your account it disabled"?
What does that mean and why is my account disable on the new IPAD but works fine on my Ipod Touch?
thank you
Just make sure you've put in the right email address and password. If you have, then contact Apple. I'm sure they'll help you straight away.

Getting error: "you cannot buy because your account has been disabled"

how do i get my account re-activated? i wasnt aware that it was disabled and am wondering why it was disabled?

send an email to the iTunes store customer support using this form and ask the folks there to sort it out for you.
JGG

You cannot login because your account has been locked

Whats i unlock my login?

Hi Guilhermeters,
Thanks for visiting Apple Support Communities.
If you cannot log into the iTunes Store using your Apple ID, first try resetting your password as mentioned in this article:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
http://support.apple.com/kb/ts2446
All the best,
Jeremy

GETTING ERROR MESSAGE"You cannot login because the phone is JAL-enabled' while logging into CAD

Hello All,
One of my customer is facing problem while loging into CAD. They were getting an error message"
You cannot login because the phone is JAL-enabled.
JAL-enabled phones are not compatible with CAD".
I gone through some cisco document saying that Join across line/Direct transfer across policy option status should be set to OFF. But i dont find option in 9971 series phone.
Any Reply for this query. Highly Appreciated.

That's because the JAL function is inherent to the 8961/9951/9971 phone and cannot be disabled. You'll need to upgrade to a release that supports this phone model or use a different phone.
Please remember to rate helpful responses and identify helpful or correct answers.

I transferred a pages file from ipad to mac (also pages) via email for editing. However received message that cannot save edited document to the mac because "trial period has expired for iwork"! I have purchased pages for both machines separately. Ideas?

I transferred a pages file from ipad to mac (also pages) via email for editing. It opened normally. However, after editing, received message that cannot save edited document to the mac because "trial period has expired for iwork"! I have purchased pages for both machines separately and presumed they would work without a hitch. Am I missing something?

It used to be that to update the trial to the licensed version with the box, you just inserted the DVD & ran the installer to convert the trial to licensed. This changed with Snow Leopard. You now need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
Yvan Koenig has written an AppleScript that removes the files. You can find it on his iDisk in For_iWork > iWork '09 > uninstall iWork '09.zip.

Please help. "You cannot sign in because your account has been locked apple"

Hi,
Today i've tried to login to App Store but i've got this notice message : "You cannot sign in because your account has been locked apple".
please help.
thanks you

Try contacting iTunes Support (these are user-to-user forums) and see if they can tell you why it's locked and if they can/will unlock it : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

I downloaded Firefox 4 onto my PowerPC G4 1.67GHz running Mac OSX 10.5.6. When I try to open it I get error message You cannot open the application "Firefox" because it is not supported on this architecture. I can't find my Firefox 3.6.16 I'm on Safari.

I just want to download Firefox 3.6 again
I downloaded Firefox 4 onto my PowerPC G4, 1.67GHz running Mac OSX 10.5.6. When I try to open it I get error message You cannot open the application “Firefox” because it is not supported on this architecture.

Use Tony's suggestion. I am running it right now and it is awesome. I love Mozilla but they basically screwed all of those older Macs over. Come on Mozilla. These Macs still work, and there are plenty of people with them out there.

I am trying to install Firefox 4 on my Mac OS 10.5.8 and I get the error message "You cannot open the application "Firefox" because it is not supported on this architecture" Help!

I am trying to install Firefox 4 on my Mac OS 10.5.8 and I get the error message "You cannot open the application "Firefox" because it is not supported on this architecture" Help!

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

I cannot utilize my Adobe documents - I get this error message - "You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for h

I cannot utilize my Adobe documents - I get this error message - “You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for help.”

Thank you! My solution was different. I had turned off services in MSCONFIG and did not turn them back on. After I turned services back on, Acrobat started working again without the nag error and impedance to use the program. I appreciate your input! Adobe customer service/tech support was dismally disappointing.

You cannot delete, because element Corporate is dependent Message no. KH551

Dear Co experts
I have craeted one form for my copa report purpose and attached to this form to my copa report.
Now i have to delete Three cloums in the form, when i was deleteing the cloums in my form system is giving the below messege
You cannot delete, because element Corporate is dependent
Message no. KH551
Kindly suggest
Rergards
venkataswamy

Your right Ajay.
But first i have deleted the report which we have created then i deleted the form and i re creted the form and report
My problem wil solved.
Regards
venkataswamy

Get Error Message "itunes cannot run because some of its required files ...

complete message that i see in a pop-up window -- "itunes cannot run because some of its required files are missing. Please reinstall itunes".
I check windows update. Microsoft says I'm up to date. When I reinstall ipod off the CD and/or itunes/quicktime from iTunesSetup.exe file version 7.0.2.16 it installs ok. If I choose unintall then reinstall or if I repair the itunes software the install program says everything is fine.
However when I connect to Ipod. The ipod window comes up in itunes and then shuts down real fast. Itunes continues to work but i can't see the ipod.
The showstopper happens when i shut down itunes after the attempt to connect the ipod. When I restart itunes i get the message -- "itunes cannot run because some of its required files are missing. Please reinstall itunes".
Reinstall **** resumes.
What files are missing?
It would be nice if the interface offered more details. Or I could go online to a self diagnostic and repair web page like Microsoft offers.
Things should be made as simple as possible, but not any simpler. -- Einstien..
I think things are too simple...
What are my options?
Help Please.

"itunes cannot run because some of its required files are missing. Please reinstall itunes".
Just uninstall and reinstall. If you get some kind of error in the uninstall process, then if it were me, I'd use windows system restore to restore your system right before the original install of iTunes. Even if you don't get the error when you uninstall, it sounds to me like it hasn't been installed properly. So if you decide to go with system restore and the same thing happens, I would download a fresh copy of iTunes installer from their website:
http://www.apple.com/itunes/download/
Make sure you download the one for Windows.
"I check windows update. Microsoft says I'm up to date."
This is because that you are. Microsoft has nothing to do with iTunes updates.

If I change the nation setting of my iTunes in order to buy a song from the American iTunes store, then change my setting back to the Korean store (where you cannot buy music) will that create any problems with my downloaded content?

If I change the nation setting of my iTunes in order to buy a song from the American iTunes store, then change my setting back to the Korean store (where you cannot buy music) will that create any problems with my downloaded content? I want to buy an album that I cannot get hold of in Korea, but it is available in the US iTunes store. However since most of my apps are downloaded from the Korean store I'll need to switch back in order to update them. Does anyone know if there are any issues in doing this. I'd rather find out before I spend money, change my store setting back to Korea, and then get told I can't listen to the music because I bought it from the US store and my iTunes is set to the Korean store.
Cheers.

You canot easily change your country settings. The iTunes Store in a country is intended only for use by that country's residents, and only while they are in the country. To use the iTunes Store in a country you need a credit card (or other card type if acceptable in a country) issued in that country, billed to an address in that country, and also be physically present in that country when using the store. You are also restricted to waiting 90 days between country changes.
E.g., "The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance." - http://www.apple.com/legal/itunes/us/terms.html#SERVICE

"HP Solution Center cannot run because your device installation is not complete"

I cannot use HP Solution Center because I only get this message when I start it: "HP Solution Center cannot run because your device installation is not complete". I am running Windows XP with an HP PhotoSmart Premium. I can print just fine and the printer is recognized by the PC and the network. I get the same problem whether connected wirelessly or through USB. I have re-installed all software multiple times. Please advise on how to get Solution Center up and running.

I had to do a total uninstall and reinstall of the driver. However, as you will see from this and other Support Forum threads there seem to be multiple stumbling blocks to the uninstall/reinstall process. Seems very glitchy. After nearly two days of unsuccessful tries I finally got it done. I did find three different official HP scenarios for the process, including one automatically sent to my desktop by HP upon one of the earlier failures. That sequence did not work work for me, but it was close--I got a partial install. But on another HP help file titled "Product Software Installation stalls or stops in Windows 7 with a USB connected product HP..." I found a six step process (with details for each), and it worked for me on the second try. Here are the six steps, plus extra things I did or discovered that could have helped make it work. I did step 5b. first: downloading and saving the HP driver file on my computer before starting other steps, since I elected not be be on the internet as I did the installation. 1. Uninstall the HP printer software. See my note below about four ways HP lists do to this. I used two of them.2. Turn off the 'terminate and stay resident programs (has to do with system configuration). See HP details.3. Clear temporary files and folders through Windows accessories.4. Disable firewalls (see my note below about this)5a. Disconned the cable from BOTH the printer itself and from the computer, BUT TURN ON the printer.5b. Get the lastest version driver for you printer from the HP site and save it where you can find it. (I did this first, before other steps, so I could install off-line)5c. Install the driver software that you saved. (see my note below about an optional step that helped me with this, so the install will complete, and not hang up)6. Enable the start up software that was turned off with step 2. (See HP details) Notes: there are versions of HP instructions that skip steps 2 and 6 and or 3 and 4, but that would not work in my case. I describe the steps that finally worked in case they can help someone else--this has been so frustrating. This uninstall/install process seems to be very touchy and perhaps changes depending on your printer or other configuration of your computer: Note about step 1: I found an HP document that listed four ways to uninstall. On my final and successful attempt I actually used two of the techniques. First I used the HP uninstaller program from the start menu program list on my computer stored with other HP stuff there. When I rebooted it did not appear that any HP programs were removed, but who knows, perhaps this got rid of some hidden file somewhere that had been causing all of the problems. Then I used the regular uninstall process from the control panel, and that worked. All HP programs were gone upon reboot. Note about step 3: I counld not believe this would help, but did it, and again, who knows, perhaps this is critical. Note about step 4: I assumed that step two 'terminate and stay resident programs' turned off my McAfee firewall and antivirus, so I did not turn it off. And I elected to be off the internet during install because I am always fearful about turning off those programs. However, and this may be the source of problems for many people, the HP list was very specific to turn off the Windows 7 firewall. I checked it and it was running, even though I thought McAfee was in charge. So I did turn off the Windows 7 firewall. Subsequently I learned that many people who have upgraded from earlier Windows operating systems to Windows 7 have the Windows firewall operating along with their other firewall, without knowing it. Apparently this does not happen if you did a clean install of Windows 7 rather than an upgrade install. Note about step 5c: On many of my tries the installation program would not terminate or complete, and I would get a partial install that allow some functions of the printer to work, but not Solutions Center. The only way I found to prevent this was at the step near the end, where you hook up the printer, select the box that says it's okay to connect it later. The installer program dumps an icon on you desktop that allows you to connect the printer after the installation shows complete and terminates by itself. By clicking the icon and plugging the cable into computer and the powered-on-printer when directed, the device installs perfectly. That was the only way I could get a full install, or get the installation to terminate. During the two days of trying to make this work I also reinstalled the latest version of Flash player since I read that HP Solutions Center needs it to show screens on your computer about printer functions. Of course downloading Flash onto a 64-bit version of Windows 7 is a little tricky too, but not that difficult. I do not know whether that was important, but it is one more thing to try if you can't make your Solutions Center part of the printer program work. I learned way more about the unintall/install process than I ever wanted to know. Sorry to be so wordy, but after two days of frustrating work on this I thought I should share this, in case any of these ideas could help someone else who is hung up on this. Perhaps there is an easier fix somewhere. The six-step process was on an HP help site and was not even for my specific printer, but the similar list from my model did not work. Wish I knew what the secret to success might have been.

Can't open iPhoto after installation .Displays message :You can't open your current photo library using this version of iPhoto

Can't open the program after Installing . Shows message " You can't open your current current photo library using this version of photo.
Made several attemps in fresh instalaltion without any success.

So I assume it is version 9.3, not sure?
Look at the application in the Finde, if you cannot launch it.
Select your iPhoto application in in the Applications folder and use the command "File > Get Info". What does the Info panel show in the "General" brick?
If it says 9.4.3, try to launch iPhoto by clicking the iPhoto icon in the Applications folder. Does that work?

I receive message "you cannot buy because your account is disable"

Similar Messages

Maybe you are looking for