I receive this message when I plug in my Samsung Continuum phone. "The disk you inserted was not readable by this computer." How do I download my photos?

I have checked usb debugging and chosen mount the device when prompted by the phone. I have tried to mount without debugging chosen and the same message pops up. Initializing my phone is not an option.. Choosing ignore does just that - nothing happens. At this point I cannot download music to my phone nor download phots from my phone to my mac. Thanks.

Thanks for your quick response. I had a look at your discussion... I tried it on a Windows machine and I thought that was compatible with ExFAT?
Therefore I need to attempt to use my external hard drive with a machine that boasts OS X 10.6.5 or above and then it should work?
Thanks

Similar Messages

  • "The disk you inserted was not readable by this computer" box appears when printer cable inserted into USB connection.

    When I plugged my printer cable into my MacBook today I received a message "the disk you inserted was not readable by this computer" with options to Ignore or Eject. The printer worked fine yesterday but does not respond today. Additionally there is abox titled "All Messages" appearing on my screen which is producing new messages every minute or so the most common of which is disk1: I/O error and disk1:alignment error, SAM Multimedia: Read or Write failed.
    I tried unsuccessfully yeseterday to install a scanner on this MacBook.Everything seemed to progress normally during the install but the Scanner did not show in my applications after my attempt to install.
    Any ideas?
    Thank you in advance

    I uninstalled and reinstalled my printer and everything seems to work fine now.

  • F this error message  "The disk you inserted was not readable by this computer" with 2 radio buttons "Ignore" or "reject"  It comes up every time I start my new printer. How do I get rid of it?

    When installing my new HP printer I received the following error message when I inserted  the software install disk: "The disk you inserted was not readable by this computer" with 2 radio buttons "Ignore" or "reject"  I was able to eject the disk but the message remains. Now every time I start up the printer this error message pops up on my computer.  I have since used the disk drive successfully for music CD's etc.  How can I get rid of this message?

    PRAM RESET
    Zap the PRAM
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Need help with Error message "The disk you inserted was not readable by this computer"

    I got this message this afternoon "The disk you inserted was not readable by this computer" with the options to either "Ignore" or Eject"
    This is in reference to my External Hard Drive "Buffalo" 1TB. I just got my Mac 27inch this week and when i got it i hooked up this hard drive to it, historically used on my old windows machine, but was still FAT32 formatted. I was able to upload all my pics to Aperture and music to iTunes. Was able to surf the data no problem.
    This afternoon i noticed that it was no longer visible in the "Finder" and afre rebooting several times, got this message "The disk you inserted was not readable by this computer"
    Neither the mac nor the HD was moved since yesterday, early this am when it worked.
    Is there an easy fix to this? whats going on.
    Some info:
    I had used this external storage unit for more then a year.
    I sold my PC today so cant test if the hard drive still works on that.
    I have the latest 27 inch mac (2.7GHz)
    Storage is connected to a power source ( I tried both USB and FireWire, both yield the same message)
    Any advice?

    Have you tried the Repair Disk feature in Disk Utility?

  • New message - "The disk you inserted was not readable by this computer"

    Time machine was working just fine with my Maxtor external hard drive, once I had reformatted it, but this morning when I was booting up I got the message, "The disk you inserted was not readable by this computer." The message gave me the options of "initialize", "ignore", or "eject".
    What gives? Why the sudden change? If I initialize, then I lose all the previous saves and defeat the purpose of Time Machine in the first place.
    Any suggestions?

    Do you still have a drive with Mac OS X 10.4 installed on it? If you do, you can see if the drive mounts in 10.4. If you get the same message, it might be a problem with the drive and not be related to TM. I had a problem with an external Maxtor drive that TM corrupted, but the drive mounted without any problems. I just couldn't write to it in 10.5.
    If you can mount it in Mac OS 10.4 or on another Mac, see if you can repair the drive with Disk Utility or with a program like Disk Warrior. Another option you can try is to disconnect the drive and then reconnect it. If that doesn't work, try disconnecting it and rebooting and then connecting it again.
    If you can get the drive to mount, copy the TM files to another drive and then reformat the drive. See this page from Seagate/Maxtor for information on formatting the drive:
    http://seagate.custhelp.com/cgi-bin/seagate.cfg/php/enduser/stdadp.php?p_faqid=5005&p_created=1195077097&p_sid=U7nFhdSi&p_accessibility=0&p_red irect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MzMsM zMmcF9wcm9kcz00MTAsNDIxLDQ2MSw1NzUsNTc2JnBfY2F0cz0wJnBfcHY9NS41NzYmcF9jdj0mcF9zZ WFyY2hfdHlwZT1hbnN3ZXJzLnNlYXJjaF9ubCZwX3BhZ2U9MSZwX3NlYXJjaF90ZXh0PW1hYw**&p_li =&ptopview=1
    Hope those suggestions help.
    Claire

  • FRUSTRATED! Cannot access Seagate external HDD - message is "the disk you inserted was not readable by this computer"

    I get the message "the disk you inserted was not readable by this computer" when trying to access my Seagate external HDD.
    Disk Utility lists both the Seagate drive and volume but all options (verify disk, repair disk) are greyed out.
    It says the volume is unmounted and Windows_FAT_32.
    (The external HDD used to be formatted for NTFS, but when I moved across to Apple last year, I reformatted to FAT32).
    I haven't accessed the drive for a few months but the last time I did, it worked fine.
    I'm running OS X 10.9.5 on MBA bought last year.
    I've spent 2 hours trawling through blogs/mac forums/apple support and nearly bought Disk Warrior out of frustration, but surely there must be a simpler solution?
    I don't think I'm dealing with a corrupt drive, just an inaccessible one!
    Any help greatly appreciated, even if it is to pay the $$$ for DW...!
    Thanks, Jay

    See mount section in 1st link.
    Disk Unmount Using Terminal
    Disk Utility – Force Mount Disk

  • Why do i get the "the disk you inserted was not readable by this computer" error when I don't even have a disk inserted?

    Why do I keep getting "the disk you inserted was not readable by this computer" caution message when I don't have a disk inserted???

    Unfortunately, I saw this error for the first time this morning. It's on my wife's iMac running Lion, and it appeared when the machine locked up on a Software Update screen prompting her to run an update (I'm assuming this was the recent Security Update).
    After numerous failed attempts to force-quit or otherwise safely restart, she hit the power button, and when the machine came back up it failed to recognize the startup disk. I've since successfully restarted from several different (external) startup disks without incident, but each time I attempt to fix the internal drive via Disk Utility the disk shows only as "Media" and all the usual options to Repair or Verify the Disk are greyed out, leaving only the Erase Disk option.
    Are we totally hosed?

  • How do I view and open all my files again that are on my external hard drive?? Error message saying 'The disk you inserted was not readable by this computer' Three options are Initialize, Ignore or Eject.

    I have recently purchased Toshiba 1TB hard drive and I set it up and I was able to transfer all my files onto it such as my music, photos, documents. I had correctly ejected and used it again and all these files were safely stored and accessible afterwards. However after I rebooted my computer as it had been going slow and I had too much clogging it up once I reconnected the external hard drive I have error message saying 'The disk you inserted was not readable by this computer' Three options are Initialize, Ignore or Eject. How do I access all my files? I set it up to work on both mac and windows. I have tried both another mac and windows computer and same issue occurs?? I am worried that all my personal files are gone but am confused as the drive has had absolutely no damage to it as it was in a very short time frame and its never left the same spot. Any help would be greatly appreciated. Thanks

    Thanks for your quick response. I had a look at your discussion... I tried it on a Windows machine and I thought that was compatible with ExFAT?
    Therefore I need to attempt to use my external hard drive with a machine that boasts OS X 10.6.5 or above and then it should work?
    Thanks

  • My Sandisk cruzer thumb drive 4.0GB (which is very old, roughly 10 years and I'm not sure about the model) reads "The disk you inserted was not readable by this computer" when inserted in my Macbook pro 2010. How do I get it to work?

    My Macbook Pro 2010 with the latest OS does not open a particular Sandisk Cruzer 4.0GB (which is an old model, about 10 years) thumbdrive with the message "The disk you inserted was not readable by this computer". Will I be able to read it on my macbook?

    Is it readable in a Windows computer?  If not then you can try Disk Utility to repair the drive-- although that may be dangerous too.
    I haven't had this problem so I out of safe ideas.  There are ustilies out there.   I used the seach term "repair flash drive Mac OS X" to locate some of these.
    If the data is essential there are pay-for services to recover data looked the price was in the range $50 - $1000
    All the best.

  • Keep getting a "the disk you inserted was not readable by this computer" when I insert my printer cord into either USB port.  Recently installed a portable hard drive for back up purposes.  Related?

    Keep getting a "the disk you inserted was not readable by this computer" when I insert my printer cord into either USB port.  Recently installed a portable hard drive for back up purposes.  Related?

    Does your printer have a slot for an SD card?  Is there are card in the slot?  If so, the computer is trying to mount that card as an external device.  It might be corrupted so that it can't be read.

  • "The disk you inserted was not readable by this computer" error message

    Hello. I've had my iMac for a little over three months and I've encountered a strange problem. I play Warcraft III, and whenever I insert the disk into the drive, I get an error message saying "The disk you inserted was not readable by this computer" and it gives me the options to ignore or eject. I've gotten the same message with Starcraft as well. I also tried putting in the iPod Nano install disk with the same result. CD-Rs and Audio cds work smoothly though. I called Apple technical support and they told me to call 1-800-MY-APPLE to schedule an appointment with my local branch to bring it in. I just wanted to make sure no one on these forums can help me. All help is greatly appreciated. Thank you very much.
    iMac (Early 2006)   Mac OS X (10.4.6)  

    Steve, the original poster made clear he was on a core duo iMAC which ONLY runs OS X (discounting non Apple OSes of course!)
    Therefore there is no extension manager. But I guess he would thank you for trying to help anyway.

  • The disk you inserted was not readable by this computer. (when putting ipod into mac) help,. now have no music on my ipod

    the disk you inserted was not readable by this computer. (when putting ipod into mac) help,. now have no music on my ipod. how do i sort this out?

    - Verify the file and disk formats on your camcorder and on your friend computer whether they support what you want to do. Also, if you are using a specific application to do the task, you may need to verify an application whether it supports the file format (e.g. MPEG4, Apple Intermediate Codec).
    - Verify the device cable type whether Mac OS X 10.4.x supports.
    - Verify the device compatibility with Mac OS X 10.4.x.
    - Check an available firmware or driver for the camcorder that has developed after Mac OS X 10.4.4.
    - Try diagnosing and repairing local hard disk and camcorder's drive directory.
    - Verify disks permissions issue.
    - Verify whether the disk is TOO warm or cold to read.
    - If every troubleshooting does not solve the issue, consider to reformat the camcorder drive.
    You may try suggestions by Dale Weisshaar: http://discussions.apple.com/thread.jspa?messageID=1206250

  • When I insert my Dvd-R it says The disk you inserted was not readable by this computer.Why is this happening ???

    When I insert my Dvd-R cd it saids "The disk you inserted was not readable by this computer." Please help
    thanks

    This is a blank disc?  A disc you burned?   Burned discs have a relatively high failure rate if you buy cheap DVDs.  I bought some Dynex ones once and about one in every four fails.
    Have you tried other DVDs to check if it is a drive issue?

  • Why does my memory stick all of a sudden trigger the message "The disk you inserted was not readable by this computer"?

    I bought a LaCie memory stick a couple of months ago. It worked fine. Now all of a sudden I get the message "The disk you inserted was not readable by this computer". What has happened? Is all my data lost? Can I retrieve it? I tried to fix it with Disk Utility (which at least correctly recognises the stick), and even though I can click on my memory stick I can't do anything to it. Any help would be greatly appreciated!!!

    According to an ASC member who claims to work for HP, this issue can be resolved by repairing the permissions of the startup volume in Disk Utility. I can't confirm, but it has apparently worked in at least one case.

  • External HDD: "The disk you inserted was not readable by this computer"

    Hi,
    I have an external drive with important data on it (there is a backup, but there is also some non-backuped data as well...). I cannot access the external drive because I receive a "The disk you inserted was not readable by this computer" message connecting it. I was wondering, if you have some advice on how to get my data back?
    I have a WD Elements 2 TB (about 2 months old), I am using is with an iMac, latest Snow Leopard. The drive used to work all fine. Now, I receive a "The disk you inserted was not readable by this computer" every time I connect it. Same thing happens if connected to my MacBook Pro.
    What happened?: I was copying files to the external drive. I the middle of it, I received a message complaining I that assumedly ejected the drive by pulling the USB cable out instead of properly ejecting it software-side (I did not do this). The drive symbol was gone. Now, I plug the drive out an reconnected it. The drive symbol showed up again. I continued copying files on the drive, but after some 30 seconds, I received the same error message again. One more time, I disconnected and reconnected the drive - this time to another USB port. The drive showed up, but I was not able to copy files on it (I am using muCommander, it just kept showing 0kb progress). I restarted the Mac. Since then I am getting the "The disk you inserted was not readable by this computer." The drive symbol does not show up anymore.
    I was googling the problem: in one forum there was a suggestion to click "initialize drive" and than to "repair" in DiscUtility. I clicked initialize drive and the drive is shown in DiscUtility, but "repair" and "verify" are greyed out. I read more posts on it, one posts suggested NOT to click initialize because that means format in Mac OS language (btw: ***, why is it not called format).
    That is the situation at the moment. What is the best - if there is - way to get my data back? DiscWarrior?
    I very much appreciate your advice!
    Daniel

    "Initializing" a drive has been normal computer terminology for decades.  "Formatting" generally referred to the high-level preparation also called "erasing."  None of this is "Mac OS language."
    Disk Warrior will not likely fix the problem you have.  DW can repair a damaged directory, but your error suggests an even worse problem of directory corruption.  I suggest you try using DW if you have it.  Visit the Alsoft site to determine the limitations and usage of the version you have.  It may not be able to boot your computer depending upon what version of DW you have and how new your computer is.
    If you have no success with DW then see the following:
    Basics of File Recovery
    Files in Trash
    If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location.  OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
    If you empty the Trash the files are gone. If a program does an immediate delete rather than moving files to the Trash, then the files are gone.  Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When files are deleted only the directory entries, not the files themselves, is modified. The space occupied by the files has been returned to the system as available for storage, but the files are still on the drive. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.
    General File Recovery
    If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro.  Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.  Two free alternatives are Disk Drill and TestDisk.  Look for them and demos at MacUpdate or CNET Downloads.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.

  • "The disk you inserted was not readable by this computer" on NTFS ext HDD

    I have spent hours trying to find a solution to this problem, but alas - nothing really useful came up. Therefore I now turn to you, Discussions - you're my only hope!
    And to the case:
    I just got a brand new shiny and aluminiy MacBook Pro a couple of weeks back, and since my last laptop was a PC, I have been very content ever since switching.
    However, this week I bought a new Lacie 2TB external HDD (also shiny) and backed up a lot of stuff from my Windows days.
    I partitioned it in Windows and made two NTFS partitions (approx. 1.8TB + 200GB). It was not an option for me to partition it to HFS, as I need it to exchange files between my Mac (using ntfs-3g) and my (and other) Windows computers (and a lot of files exceed the FAT32 file size limit).
    Unfortunately when I connect to my MacBook Pro (and my old 2005 PowerMac G5) it gives me the "The disk you inserted was not readable by this computer", and I am not able to verify nor repair it in Disk Utility. It doesn't even show the partitions correctly, it only weirdly enough shows a 3 megabyte partition and 329.70 megabytes of free space.
    It still, however, works fine on my Windows computers. I also have the 1TB version of the same Lacie HDD also with two NTFS formatted partitions, and that drive shows up nicely on my MBP.
    Does anyone know how/have an idea on how/have a magic potion to fix this?
    - I have run chkdisk on it on my Windows comp and it showed no errors.
    - I have also tried booting Snow Leopard in 32bit kernel mode (as someone presumably had that help earlier) but with no luck.
    - I've connected it both via USB and FW. Same problem.
    - I've installed and later uninstalled NTFS-3g and MacFuse - no change.
    - And as mentioned I've connected it to my PowerMac G5 (w. Leopard), that also couldn't read it properly.
    It is not an option for me to reformat it right now, as I have nowhere to back up that drive (and buying another new external drive is out of the question, as I semi-accidentally spent all my money on the new MBP ).
    Anyone helping me solve this issue will receive 10 units of my deepest gratitudes (and maybe a couple of muffins, should the person drop by some time).
    Thanks in advance.

    Well it seems to work somewhat now, after some playing around.
    And here's what I did:
    - I downloaded the bootable System Rescue CD
    - I booted it up from my PC. And entered the TestDisk utility, where I resaved the partition table (even though it already showed up fine). (If you don't have an extra PC to boot from, the TestDisk utility can also be installed on Mac OS, I just don't have the skills to do that).
    - Tadaa! Now I was able to read the disk and its two partitions (one NTFS and one exFAT) on my MacBook! But... When I plugged the external drive into my PC again it didn't show up anything, and in the disk manager, it detected the drive structure as being all unallocated space.
    Upon plugging it into my Mac again, it once again showed my old fiend, the "The disk you inserted was not readable by this computer" error. Sigh.
    - So once again I booted up the System Rescue CD and TestDisk, and rewrote the partition structure. One weird thing was, that TestDisk this time detected the disk as being mac formatted, so I had to manually select the "Intel/PC" structure option. After rewriting the structure the disk once again it showed up nicely on my Windows PC.
    - Before plugging it back into my Mac, I decided to try and install MacFuse and NTFS-3g.
    - Since MacFuse doesn't apparently support the 64-bit kernel mode, I booted up my MBP in forced 32-bit kernel mode and voila - I could now read (and write) to my NTFS disk and connect it to my PC and back, without it messing up again.
    I won't mark this issue as solved just yet, as I will need to see if it lasts. Also it's not really a lasting solution to be forced to boot into 32-bit mode, so I'll have to see if there's another way at some point.
    Message was edited by: Nilfisken

Maybe you are looking for

  • Custom reporting for UCCX 7

    Hello there, I am looking for easier ways to generate custom reports for UCCX 7, I am asking incase I go away an spend heaps of time programming stored procedures and crytal reports if there is a report pack out there or some documentation to make it

  • Sender rewriting rule not working

    Hi, I am unable to make may sender rewriting rules working. The recipient rewriting rules works ok. I want to change the reply address that shows up in the destination email. For example, if i am sending from [email protected] (via Oracle webmail)i w

  • Connect mac mini to imac

    Hi, I was wondering if I can connect an old mac mini to an imac so I can use the mac mini as an aditional hard drive to store all my music and pictures. If so, how do I do it? Thanks in advance. Oscar

  • N96 since V12 update - can't change snooze time

    I'm having a problem with my N96 since updating to v12.043. Regardless of what I set the alarm snooze time to, the phone snoozes for 5 minutes. I've changed the snooze time in "Settings | General | Date and time" a few times, rebooted the phone, etc,

  • Buttons for popup windows

    I have created a button in a "region position" that opens a popup window, this works fine. How do I do this for a button amoungst the "region's items"? I have created a button in the regions items that runs a branch process, but this does not work. W