I recently upgraded to Mtn Lion 10.8 and can't load any of the myst games: Myst, Riven, Exile,etc. Is there a patch needed?

I recently upgraded to Mtn Lion 10.8 and can't load any of the myst games: Myst, Riven, Exile,etc. Is there a patch needed?

BookCamp will not help
PowerPC is the processor that Apple used prior to switching to Intel. It is a very old version of Apple for which support has been dropped.
It is not Windows which is what BootCamp will allow you to install.
Allan

Similar Messages

  • I recently upgraded to Mtn Lion & now when I put in my disc to open/run Presonus Firebox w/ garage band, it says PC its no longer supported.

    But the Firebox is still being recognized. Anyone know how to make this work? Hate to not use my expensive equipment simply becuase of a operating system upgrade.

    Welcome to Apple Support Communities
    Lion and Mountain Lion aren't compatible with PowerPC apps. If you want to run those apps, you have to update them to the most recent version or install Mac OS X Snow Leopard.
    As you upgraded to Mountain Lion, you can make a second volume on your hard disk and install Snow Leopard there, so you will be able to run those apps. In this case, the virtual machine solution isn't valid because the virtual machine doesn't provide enough performance to run that type of app or they will run better in a second volume.
    If you need help to create the volume, read > http://pondini.org/OSX/DU3.html

  • HT4641 I have recently upgraded to Pages 5.1.  I can't open any of my previously created Pages docs because I am told they are too old and have to be saved in Pages'09 first. I don't have Pages '09. How do I open them?

    I am technologically challenged senior citizen who recently upgraged to Pages 5.1 from what I think was iWorks '08.  I now find that I am not able to open any of my important previously created Pages documents.  I receive a pop-up that tells me that they are too old and must be saved in Pages'09 first.  I no longer have the disk for iWorks 08 and don't have Pages '09 on my iMac.  Any ideas how I might get these documents open?

    You should have the old Pages '08 inside the iWork folder, inside your Applications folder.
    Open your old files in Pages '08 > Menu > File > Export > Word
    Pages 5 can then open that Word file.
    Peter

  • I recently upgraded from Snow Leopard to Mavericks and can no longer share files, does anyone have suggestions?

    I had to set up an appointment with the local genius bar to install Mavericks as I use WiFi and am very close to mountains which tend to interfere with clean downloads.  I am now unable to send work product via email as a PDF - I'm hoping someone has suggestions for me - or should I just make another appointment?   My thanks, Bobbie4886

    There could be many ways to be "unable to send work product via email as a PDF."
    Can you no longer create PDFs from your work product?
    Can you no longer find the PDFs when you try to attach them to an email?
    Do you get an error message when you try to attach them?
    Do you get an error message when you try to send the email?
    Does the email with the attachment disappear without a trace?
    Does your recipient not see the attachment?
    Does your recipient get an error message trying to open the attachment?
    Something else? What?

  • We upgraded to OS 10.5.8 and can't load thumb drive data back on

    We backed up the MacBook onto a thumb drive,  reinstalled Leopard,  and now can't put the data back on the computer.
    Any suggestions. 

    It is a friend's computer - an iBook (not duel processor) but she upgraded it last year to 10.5.1 and then Safari stopped working and the Genius bar said to reinstall Leopard.  So we backed up her computer on a thumb drive and did a clean install of OS 10.5.1 and eventhing is fine - Safari works etc.  however we can't put her data back on the computer??   I don't know what to do - I just know a little more than she does

  • Upgraded to Firefox 29.0 (Mac) and can now no longer minimize browser window by double-clicking title bar. Please advise!

    I recently upgraded to Firefox 29.0 (Mac) and can now no longer my minimize browser window into the dock by double-clicking the title bar. I need to be able to use this feature. Please advise!

    I just upgraded to iTunes 8.0.1.11 too (XP) and am seeing the same behavior. The little mini controller in the taskbar no longer works. If you double click the icon in the system tray, you can restore the iTunes window.
    On the Advanced preferences tab, select both the "Show iTunes icon in system tray"
    and the "Minimize iTunes window to system tray" checkboxes. If only the "Show iTunes icon in system tray" is selected, you will not be able to restore the iTunes window and will have to use the task manager to kill iTunes.
    Hope this gets fixed, I found the task bar controller very handy for pausing/starting/volume control/etc.
    -Roger Pates

  • Re: My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?

    Re: My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?

    If you are trying to recover photo stream photos, they are only held in iCloud for 30 days.  All you would be able ro recover is photo stream photos from the last 30 days.
    If you have an iOS device that still has the photo stream photos one it, you can save them to the camera roll by opening the my photo stream album, tapping Edit, tap the photos, tap Share, tap Save to Camera Roll.  Once in the camera roll, they can be imported to iPhoto on your Mac as explained here: http://support.apple.com/kb/HT4083.

  • My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?

    My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?

    While we all have MacBooks in this forum most of us don’t use iCloud. There's an iCloud Support Community where everybody uses iCloud. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/icloud/icloud_on_my_mac

  • I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

    I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

    apikoros wrote:
    The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
    1)  I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access.  But do I have to  change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
    Resetting the password you will need to do for each device... the utility cannot even see those old units.
    So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
    2)  Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
    N.Korean hackers.
    [Edit] Whoops-- one more question:  I want to partition the TC's disk, but Disk Utility doesn't see it.  What do I need to do?
    You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
    Look at Q3 here.
    http://pondini.org/TM/Time_Capsule.html
    Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

  • IPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?

    iPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?

    At least to 10.6.8. You must do this to upgrade to Mountain Lion.
    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.

  • I have recently upgraded to mountain lion and I can not get the calendar application to work. I con appears on the side put on calendars. Any suggestions

    I have recently upgrades to Mountain Lion and I can not get the calendar utility to come alive. Icon appears in the tast bar but the application does not launch or appear to be any where else. Any suggestion?

    Did you look in the Applications folder for Calendar? If it is there, remove the item that is in the Dock and replace it by dragging the Calendar application to the Dock.
    If it is not there, did you have iCal located somewhere other than the Applications folder when you upgraded?

  • The Appeture library no longer appears when i try to use the attachment feature on aol how do i get it back recently upgraded to mountain lion

    I recently upgraded to mountain lion and when i go to attach a picture from appeture it does not appear after i click the attachment it just dissapeared how do i get it back  HELP

    In Aperture, go to preferences->Previews.  Ensure that "share previews with iLife and iWork" is set to "always" or "at exit."
    Also ensure all your photos have previews.

  • My screen suddenly zooms too big w/o me touching anything.  Please help. I recently "upgraded" to Mountain Lion on my iMac

    My screen suddenly zooms too big without me touching anything (i.e. mouse or keyboard).  I can't reduce it.  Part of the menu reappears when I click at the very top, but I can't even get the red-yellow-green buttons to show.  I recently "upgraded" to mountain lion.  Did not have this problem in the past.  My settings appear to be correct.  Any suggestions?

    Hi, have you tried setting a different rez in thje Disply Pref Pane of System Prefs?
    Do those things show if you Safe Boot from the HD, (holding Shift key down at bootup)?

  • Upgraded to Mtn Lion, runs like a tortoise

    Upgraded to Mtn Lion, runs like a tortoise: how do I speed up my system?

    Ok, so then we can proceed to determine what process is sucking up all CPU cycles. Have a look in Activity Monitor, sorting out processes by %CPU (click on the column label). Holler back if you need help identifying what each process is.
    May also want to check out the items in the bottom pane for more clues:
    In CPU, check out how much %User, %System and %Idle is the total CPU time being apportioned. On a personal computer, most should be in idle time (compared to a server). Note that people have reported that ML has a lot more background processes running than Lion did.
    System memory will show how your 8GB are being used. In mine, free mem (green) is usually from a fourth to almost half of the total, unless I'm running heavy duty stuff like VMW Fusion and a VM or two. Check also the swapping activitu (page ins vs. page outs).
    In Disk Activity, if you're doin' nothing, so should the drive; if something is pegging it, will need to find out who the culprit is.
    Same for Network. Unles you're downloading multiple copies of the ML installer or othe such massive undertakings, traffic should be light unless some unknown is hogging the wire.
    Hope this helps.

  • Can I upgrade to mtn. lion from lion?

    Can I upgrade to mtn. lion from lion?

    Mountain Lion and Mavericks have the same requirements. You might as well upgrade to Mavericks as it is newer, and unlike Mountain Lion, it's free. Check the requirements at http://apple.com/osx/specs.

Maybe you are looking for

  • Can I connect my late-2012 iMac to my mid-2010 MacBook Pro?

    I've just bought a new late 2012 27" iMac and also have a mid-2010 MacBook Pro. I also purchased a Thunderbolt cable, is there anyway I can use this to connect the two? If not... do I have any options for file sharing between the two?

  • How do I use a dynamic variable from a prolog script?

    I have my test broken in to three scripts, a login, an update, and a logout. There is a dynamic variable, SERVICE_VIRTUAL_CLIENT, from the login script that I need to use in the update script, but I can't figure out how to do it. Any help would be ap

  • Problem while creating metadata files

    I created metadata files to add styles to Photoshop Elements 8 (in Windows 7) and included them in the C:\Program Data\Adobe\Photoshop Elements\8.0\Photo Creations\layer styles folder.  The first several worked great and successfully showed up in the

  • Problems after updating to IOS 8.0.2

    I Updated my IPad 2 to IOS 8.0.2 and got lots of problems.. Screen freezing, can't scroll, keypad locking, some icons on home screen changed to white. IPad screen intermittently not responding to touch and not showing cursor when typing. ANY IDEAS WH

  • Java Store Procedures

    Hi Guys, Does anyone know if it is possible to implement a java store procedure that will be subsequently called in a "select" operation within a "where" statement in Oracle 9R2? Thanks, Andrea