I restored my non functioning ipad to factory settings on itunes and I can see the ipad on itunes but the screen is still showing nothing but a very dark blue/black screen. Can I correct this myself?
Ipad won't turn on. when you press the home/on button the screen lights up a little to a dark blue/black screen.
I've forced it into recovery mode, restored it to factory settings on itunes. I can now see it on itunes but nothing is coming up on the ipad.
Can anyone offer any advice as to how I can fix this.
Thanks.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom
Similar Messages
-
I really need to get this fixed
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
TS3274 When i turn ipad on, there's a dark blue blank screen
Ipad 2 ran out of battery, put it onto charge, came to it this evening, and nothing there except a dark blue, blank screen.
Tried holding 2 buttons for upto 40 secs - no change.
Screen changes colour from off (black) to blue shade when home button pressed.
Otherwise, nothing.
Worked fine last night.Has the unit EVER been jailbroke?
If "No," first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this. -
I have had to restore my ipad to factory settings, having made a backup on my pc first. When Ihave tried to restore from my pc I have no apps!! Please can anyone help me get them back with all their data. I don't have wifi at home and I have never been able to sync my pc with my ipad, although it works with my iphone! I copied all of the apps before I restored using itunes, but no idea where they are copied to. Any help would be hugely appreciated to get my daughters games back. Thank you in advance )
Hi Skydiver119
Thank you so much for taking the time to reply to my problem.
Yes the purchases were made though my apple id.
I have looked at a few other questions on this topic and I have read that the app data is stored in the backup file but the apps themselves need to be synced back onto the ipad. Someome has mentioned right clicking on sync my ipad but I don't know where to find that to right click on!! Lol.
Again, I really appreciate your time and if by any chance you know where I can 'right click' I would really appreciate you letting me know as I can't get my ipad to sync with my pc at all, although it is being picked up in itunes and it has backed up to itunes okay. GGrrr. Maybe I have something wrong in the settings which is not making them compatible? -
iPad 2 problem. After updating to IOS 8.0.2 iPad says that I need to plug into iTunes. When I do that, the only option is to restore iPad to factory settings? iPad will do nothing until then. I have never had this problem before. Help
Hi ..
Follow Apple's instructions for recovery mode here > iOS: Unable to update or restore
You can restore from a backup. -
I've been trying to restore my daughter's mini ipad to factory settings. When I click restore ipad (while it's connected to itunes) it will update for a while then a pop up will say I need to enter the passcode on the ipad!! That's the whole point of restoring the ipad. We don't know the password and it's disabled. HELP
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I did an update on my ipad and now I have to restore it but it says I will lose everything How can I get my pictures on there before I restore my ipad to factory settings?
They will be gone from the iphone, but you should be syning all contacts to your computer regularly and should be importing all pics to your computer regularly, particularly before any update.
Have you failed to do this? -
My iPad conveys that it is disabled, and that I need to connect to iTunes. When I connect to iTunes I get a message that I need to enter my pass code and open my Ipad, but I don't get the screen to open with a password. How do I fix this?
You will need to restore it. It may not sync, but the iPad's sidebar has to appear you can restore it and it will be as the last time ou synced it to iTunes. For more info:
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software -
I have restored my IPad to factory settings however cannot now get in as password is incorrect
I have restored IPad to factory settings however can not get now as password is not working. I have tried the initial password and also using 0000.
The following pertains to an upgrade to iOS 7, but it does say something about the "Skip" link:
After installing iOS 7 you may be asked to provide a passcode; if you haven't ever defined one...
If you don't see the word "skip" in small blue letters try the following. Otherwise tap "skip".
Enter any number and remember what it is. See if this lets you in. If so, go to Settings>General>passcode lock. enter the number and then you can turn off passcode (a vary bad idea, as many have discovered when their devices were stolem) or turn off and then on using a different number.
If your device is disabled at this point...
Connect to your computer in recovery mode per the instructions in http://support.apple.com/kb/HT1212
You may need to do this more than once. -
hello..i have IPhone 4S i did reset to factory settings by fault and till now after a 2 hours waiting (as known it takes a 1 to 2 minutes maximum) there is nothing just a blank screen and a running waiting icon in the middle of the screen and none of home or turn off button are responsed so i do need your help plz & thanks in advance..
Try to reset it by holding the power an home buttons at the same time until you see the Apple logo, then release. If it won't reset, you'll probably have to force it into recovery mode and restore it, as explained here: http://support.apple.com/kb/ht1808.
-
is there any way to restore factory settings on an Iphone 5s that will not connect to Itunes because the phone is locked with a pass code. Problem is that the screen is completely shattered.
If the screen is completely shattered why bother to try and restore the phone?
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support -
I bought a song on iTunes, and it is on my iPad, but the song will not play, it skips to the next song. How can I fix this?
Music>Songs>Select song>Swipe from left to right to delete.
-
I can see my ipad in my computer but not in itunes- how do i fix this?
I can see my ipad in my computer but not in itunes- how do i fix this?
Make sure you turn on the Menu and Sidebar if you are using the latest version of iTune.
Ctrl+S to view Sidebar
Ctrl+B to view Menu Bar -
i've had to reset my ipad to factory settings and restore from backup (have also got new softwear) my passcode is now not working - any ideas on the default?
Typos mad = and
Receive = retrieve -
After upgrading to IOS 8 on my iPad I constantly get a temperature warning despite the fact it is cool. Did not happen with IOS 7. I have restored the iPad to factory settings with the problem not resolved.
Hey, I've got the same problem. Did you find any help or solution by now?
Maybe you are looking for
-
How to divide the UWL tasks listed in "Tasks" in different views ??
Hello, i want to divide the tasks listed in the UWL in different iviews depening on whether they are tasks from the R3 workflow, tasks from the KM or tasks from the guided procedures ; in other words, i don´t wank one iview showing all the tasks toge
-
Accidentally deleted CC, now I can't download creative cloud or app manager
Hello, I foolishly deleted my cc instead of uninstalling it and now when I go to install cc I get an error saying that I have to download the app manager first. When downloading the app manager I get an error that links me to "adobe's supervisor prog
-
64 bit sqlplus not work on 32bit machine
We have 10g DevSuite on a 32-bit machine (with 32 bit solaris 9). Forms and reports are running fine, except sqlplus. The 64-bit sqlplus will cause "exec format error" when issued. How to solve the problem? Can we install 32-bit sqlplus on the same s
-
Which would be the best NAC approach with thin clients up today?
Hello guys, Which would be the best NAC approach using CAM/CAS infrastructure for thin clients? I guess nac agent is still not supported on thin clients/virtual desktops right? Would mac address authentication be the best option? Regards, Emilio
-
Icloud will not let me sign on with my apple id.
I have downloaded the icloud control panel but it will not let me log in.