I SCREWD UP AND SHUT DOWN MY MAC WHEN IT WAS IN THE PRIVLEDGES STAGE BECAUSE MY PLUG-INS FOR AFTER EFFECTS WASNT WORKING, WHEN I SHUT IT DOWN AND TRIED TO START IT BACK UP, MY MAC KEPT RESTARTING, TEST-RAN-ERROR..4MOT/1/40000003:HDD-14444? WAT IS THIS?

I SCREWD UP AND SHUT DOWN MY MAC WHEN IT WAS IN THE PRIVLEDGES STAGE BECAUSE MY PLUG-INS FOR AFTER EFFECTS WASNT WORKING, WHEN I SHUT IT DOWN AND TRIED TO START IT BACK UP, MY MAC KEPT RESTARTING, TEST-RAN-ERROR..4MOT/1/40000003:HDD-14444? WAT IS THIS? WAT DO I DO TO GET MY MAC BACK RUNNING

I believe you've posted this multiple times. Once is all that's needed. Also, please don't use all caps. Aside from the fact it means you're shouting it's also harder to read than mixed case.
The error means a bad fan motor or the HDD has failed. In your case it's the latter. You can try the following:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
When formatting has completed quit DU and return to the installer. Complete the OS X installation.

Similar Messages

My Mac is doing strange things: delaying between users, mouse flickering and bouncing, gets stuck with rainbow wheel flickering. I ran the appel hardware test and it detected an error: 4MOT/4/40000003:HDD-1233 Does anybody know what that means? HELP!

My imac is doing strange things:
-delaying between users: when closing session it goes to blue, then takes a while to appear users signin box, and then wont recognize mouse command to enter until a couple of minutes later... then everything seems alright until....
-it gets stuck between things, the rainbow wheel appears and its just delays there forever....
-and every now and then the mouse starts flickering and bouncing wildly onscreen.
I ran the appel hardware test and it detected an error:
4MOT/4/40000003:HDD-1233
Does anybody know what that means? HELP!

WZZZ answered about where to get iStat. And do check the SMART status. If it is an overheating problem due to a fan or logic board problem, your hard drive is possibly cooking itself to death. If so it isn't a faulty hard drive even though the hard drive might fail. So assuming it's a temperature problem, even if you are able to repair things on the disk with software, that is working on symptoms, not causes. I could be wrong however.
RE: AppleCare: Your iMac came with one year of AppleCare (Apple's warranty program), but within the first year you can buy 2 more years. You have to extend by the one year anniversary of purchase of the computer. Your 10,1 is too old to still be in the first year, and since you asked what it was, I'm sure you don't have it. Bottom line meaning is that whatever this problem turns out to be, you'll have to pay for it. Unless there is something like this. It is for 2011 iMacs with certain Seagate drives. You can put in your serial number for fun, but it looks like yours is too old. Lastly, some people have had Apple help them anyway if it is just out of warranty, but many have not. Your machine is one of these. Type in 10,1 in the search box. Is there an Apple Store near you? Just b/c it's out of warranty doesn't mean you shouldn't have it looked at by Apple. But no one here can say at all what Apple will or will not do.
Hope you get it taken care of!

I ran hardware test and error 4MOT/1/40000003: HDD-1322 came up. Anyone know what this is?

I ran hardware test and error 4MOT/1/40000003: HDD-1322 came up. Anyone know what this is?

Hi guys,
I have a similar problem, the numbers at the end of the error code change a bit, when i do the apple hardware test again ( I have an imac of early 2008, 2,66 GH). I have 2 GB Ram now, after one week ago one of the 2GB-Ram sticks "died") In fact, it was working quite much, then suddenly (i bought imac in june 2009) the ram stick was broken. The apple-support center told me its probably not a problem, but did not tell me what the error code means. I have apple-care for 3 years, its a luck i did it, so they will take it and check carefully, but just after i insisted on the error. It seems they do not want to tell u what that could be....
Do u guys think the ram-stick was broken because the imac was too hot???

I had run the hardware test, and it reports an error: 4MOT/1/40000003:HDD-1344

Hi there, anyone know whats the error code means?
4MOT/1/40000003:HDD-1344
I have my iMac 27" for 14 months, and it just passed the warranty ...
Is it the hard drive problem or other?
Thanks
Lewis

That is the Hard Drive cooling fan.

Few days back I installed Autocad 2014 in my macbook pro 15" early 2012.For few days it worked fine but since last two days I'm getting graphical lag in my mac. Finger gestures and dock movement all seems to be lagging badly.Please help.I'm using maverick

Few days back I installed Autocad 2014 in my macbook pro 15" early 2012.For few days it worked fine but since last two days I'm getting graphical lag in my mac. Finger gestures and dock movement all seems to be lagging badly.Please help.I'm using mavericks

We regularly use Cocktail by Maintain software. You run the whole gamut of options but the important one is in System - Databases - Rebuild launch services. Also in Files - Caches - then clear the lot.
This is just houskeeping really but there are so many 'links' in A/cad it needs 'cleaning'

I installed Nik:s suite of plug-ins for LR5 but for some reason not all of them were installed. In the end I uninstalled all of the Nik programs from my Mac but before I reinstalled them I opened LR5 again to check. Under "photo" and "edit in" the plug-in

I installed Nik:s suite of plug-ins for LR5 but for some reason not all of them were installed. In the end I uninstalled all of the Nik programs from my Mac but before I reinstalled them I opened LR5 again to check. Under "photo" and "edit in" the plug-ins were still presented but no programs opened, of course. after reinstalling the plug-ins one of the programs appeared twice in the list but not the others. I´m going to reinstall them again and I´m wondering if there is anyway of erasing the links to the plug-ins under "photo" and "edit in" ???

Wow that was really quick, thank you so much. Im not sure at all which version it was because i said it was around 4 years ago he bought it. I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names. isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
sarucia

HT1848 I am trying to transfer my purchases from my iPhone 5 to my new Mac computer. I get the message stating that it can only be synced with one computer at a time. I have tried the 2 other ways and I get no options to transfer my purchases. Help?

I am trying to transfer my purchases from my iPhone 5 to my new Mac computer. I get the message stating that it can only be synced with one computer at a time. I have tried the 2 other ways and I get no options to transfer my purchases. Help?

If you see Devices in the big list on the left-hand side of iTunes, it should show the name of your iPhone right below it. You can right-click (or hold ctrl and left click) on the name of the iPhone there, and choose "transfer purchases from iPhone".
If you're on iTunes 11, you won't see the big list of the left until you go to the View menu at the very top (where you see iTunes/File/Edit/View/etc) and choose Show Sidebar. Then do the same thing: right-click or ctrl and left-click on the iPhone's name below Devices and "transfer purchases from iPhone".
It'll ask you to authorize the computer for your Apple ID if you haven't yet; to do that, you just type your Apple ID and password in when it asks. If it says you are not authorized but doesn't automatically give you an option to do so, then you can go to the Store menu at the very top and choose "authorize this computer".

HT201232 My operating system is Mac OS X 10.6.8 and when I'm surfing the web, it tells me I need to update my browser however when I check for updates, nothing comes up. What do I need to do to get Mac OS X Lion v10.7?

My operating system is Mac OS X 10.6.8 and when I'm surfing the web, it tells me I need to update my browser however when I check for updates, nothing comes up. What do I need to do to get Mac OS X Lion v10.7?

Software update will only bring you up to the current level of the system you are using - you are at the maximum for Snow Leopard. To get Lion or higher you will have to go to the Mac App Store in Applications and purchase it there (Yosemite is free). You will need to check that your Mac meets the requirements and you should particularly note that PPC programs such as AppleWorks will not run in Lion or above.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price (though it's reported to have been removed from sale in some countries so may well cease to be available generally) but there seems little point as the system requirements are the same for Yosemite (10.10.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
The requirements for Mountain Lion and Yosemite are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Yosemite is available from the Mac App Store (in Applications). Mountain Lion can be obtained the Online Apple Store. (Mavericks is no longer available.)
If the problem is only with Safari and you are otherwise happy with Snow Leopard you could switch to FireFox (free) - the latest version of that will run in Snow Leopard.

I have the current Mac Pro the entry level with the default specification and i feel some slow performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest?

i have the current Mac Pro the entry level with the default configuration and i feel lack of performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest i could do on my Mac Pro ?

256GB SSD it shipped with will run low and one of the things to watch.
Default memory is 12GB also something to think about.
D500 and FCP-X 10.1+
http://macperformanceguide.com/index_topics.html#MacPro2013Performance
Five models of 2013 Mac Pro running Resolve, FCPX, After Effects, Photoshop, and Aperture

My mac won't wake up from a sleep and I have to unplug it to reboot as the power button doesn't function as well. Any suggestions? Running Lion 10.7.4 and sending all reports in.

My mac won't wake up from a sleep and I have to unplug it to reboot as the power button doesn't function as well. Any suggestions? Running Lion 10.7.4 and sending all reports in to Apple.

First things first:
Update your profile (equipent, OSX, etc)
In Lion MS office2004 is not compatible, are you stIll using it?
Do the SMC RESET and do the PRAM reset.

New AJAVideo Mac & Windows Plug-Ins for @Adobe CS6

New #AJAVideo Mac & Windows Plug-Ins for @Adobe #CS6 now available! Read more http://bit.ly/IfTKL9 download http://bit.ly/JcwWfx

First off - yay.
In the little amount of time I have had to test, the first thing I notice is that the video out to my ext. monitor seems to lag by a few frames from the program monitor in Pr. AJA support is great in their help, but I'm wondering before I bother them, is anyone else seeing this - is there a setting to be tweaked?
Also, the video out is looking a touch soft to me - I have a Flanders Scientific Grade 1 monitor, so it is not the hardware. I may need to test this a bit more with other footage, but it was my first impression. Wonder if the settings here need to be tweaked as well.
I had visions that Transmit would output the hoverscrub, but it looks like you have to click on the clip and play back before it is displayed exernally. But, on second thought, I don't know how that would be utilized, since the video out would have to suddenly switch every time you hover your mouse over the clips in the bins.
Having said all that, I am thrilled to finally have this driver!

I have multiple emails associated with my i phone, but can't get my mac to associate some of the email names because it is associated with other apple id , but it's my id. how can i get around this?

I have multiple emails associated with my i phone, but can't get my mac to associate some of the email names because it is associated with other apple id , but it's my id. how can i get around this?

- Try contacting iTunes for the password problem:
Apple - Support - iTunes - Contact Us
- For the other problem you can try a reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- The next standard thing to do is to download/install a new app but you cant 'do that.
- Instead, try restoring from backup.

Mac Plug-ins for Adobe indesign CS5

Hi all,
I am making new Indesign CS5 plug-ins for Mac os.
build my project and i get error "Developer/usr/bin/gcc-4.0 failed with exit code 1"
what it mean error "exit code 1"?
and I am work on porting of Adobe Indesign CS4 to CS5 plugIns for Mac Os,What Project Settings required Xcode for build code succesfully?
Pls kindly help me out from this problem.
Thanks a lot:

I build samples project its working fine for that.
I use xcode Version 3.1.3
Component versions
Xcode IDE: 1191.0
Xcode Core: 1192.0
ToolSupport: 1186.
are you set any path, inside Project Settings before compile your project?
like "jni" releated path.

Hi- I keep getting an error message show up when I sync my iPhone to my Mac Book Pro. the message is that I can't copy to the Macintosh disc because I don' have enough access privileges. Then when I click ok my phone gets stuck syncing. any thoughts?

Hi- I keep getting an error message show up when I sync my iPhone to my Mac Book Pro. the message is that I can't copy to the Macintosh disc because I don' have enough access privileges. Then when I click ok my phone gets stuck syncing. any thoughts?

Sounds like a possible permissions issue, try repairing the permissions using Disk Utility.
You can open Disk Utility several ways.
1. Use the Spotlight in the Upper Right corner of the screen and search for it, then click it to open it.
2. Open a new finder window (File> New Window)
- Applications>Utilities>Disk Utility
3. Click on the Finder
- Click 'Go' in the menu bar across the top of the screen.
- Click Utilities, then double click on Disk Utility.
Once Disk Utility is open there should be a column on the left side, the name of your hard drive should be listed there.
(By Default it is named Mac HD or Macintosh HD)
Click on it to highlight it.
There should then be a few buttons you can click
- Verify Disk Permissions
- Repair Disk Permissions
- Verify Disk
- Repair Disk
Click Repair Disk Permissions

OSB 11gR1 plug-ins for Eclipse/OEPE on MAC OS

Where/How can I get OSB 11gR1 specific Eclipse/OEPE plug-ins for Eclipse under MAC OS X?
I installed the Eclipse 3.5.2 w/ OEPE plug-ins on MAC OS X, but need additioanl plug-ins to do OSB 11gR1 development in it, but can't seem to find them
anywhere!
Any help is greatly appreciated.
THanks
RB

additioanl plug-ins to do OSB 11gR1 development in it, but can't seem to find them anywhere!these plug-ins/features are installed in OEPE by the OSB installer during installation.download from http://www.oracle.com/technology/software/products/osb/index.html, extract the osb.zip and runInstaller.sh. Hopefully the install script should work (I doubt if MAC OS X is supported. But could forsee no reason why this script cannot execute in MAC OS X unless there are hard coding in this sript for supported OS ).
You are trying a un-supported configuration and all the best.
My two cents.
Manoj

I SCREWD UP AND SHUT DOWN MY MAC WHEN IT WAS IN THE PRIVLEDGES STAGE BECAUSE MY PLUG-INS FOR AFTER EFFECTS WASNT WORKING, WHEN I SHUT IT DOWN AND TRIED TO START IT BACK UP, MY MAC KEPT RESTARTING, TEST-RAN-ERROR..4MOT/1/40000003:HDD-14444? WAT IS THIS?

Similar Messages

Maybe you are looking for