I sent my First generation serial number for a recall, however nothing happened. No email, nothing. And when I tried it again, it said I had already sent that serial number. It's been days, a week even. Help?
I sent my First generation serial number for a recall, however nothing happened. No email, nothing. And when I tried it again, it said I had already sent that serial number. It's been days, a week even. Help?
Enough said. I don't know if I already received an email however may've accidentally deleted it or something, but I still don't know what to do. I can't do anything anymore because iTunes is not accepting the serial number anymore.
Just wait a few more days. Apple has been hammered by the number of replacement requests, so they are a little low on supplies at the moment.
B-rock
Similar Messages
-
I was trying to contact my wife in another country on a trip as I have several times since she has been away. Today we connected and then lost the signal and when I tried her again I got connected to someone in CA. How does that happen??
Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions. -
dears, i have purchased a new macbook pro with lion os, then after a while for a notification to update the iPhoto app, and when i tried to update it said that unable to update, then i uninstalled it, then i tried to install it but it said these apps connot be installed on this computer!!!!!
what should i do
this problem started to annoy me, as am not able to edit any photo.
pls help ASAPThanks a lot i followed the instructions for safe mode (i found out that i was pressing the C button after restarting) i did whats written there but the repair couldn't be performed so in addition i needed to re-formate the HD so i erased the volume and then repaired the disk--> quite disk utilities --> start the installation from the installation DVD.
Thanks really appreciating your help -
My iphone 3GS battery is draining off in 4 to 5 hours even in stand by condition.
Tried with all the applications and Wi Fi off.
Phone is getting warm just like that!!
It was working fine in the last week!!
Any solution?
Varghese paulThere is no reason that a brand new phone should be having problems. I would say return it for a new one because it's less then a week old or return it. It's unacceptable. I have been having software issues with my iPhone 3GS too. I feel that Apple did a half done job on the software and really failed to bring new features to their third gen. iPhone.
-
can anyone help?
Hi
You need Logic v9.1.5 or higher to run with OSX.7 Lion
http://support.apple.com/kb/HT4807
CCT -
I purchased Adobe sc6 master collection from software city and i cannot locate the redemption code, but I do have the serial number for mac, do i still need the redemption code and where would i find it?
Hello,
please have a look there: https://helpx.adobe.com/x-productkb/global/redemption-code-help.html
>>> Redeem your redemption code in three easy steps.
Hans-Günter -
I forgot my password\i get my phone back and i forgot my password so i read that you have to restore your iphone so when i tried restoring it it said the i phone cannot be restored at this time something about cant be contacted with the server and i youtubed how to fix that and it did but when i tried it again it said error (3194) so i went back and it said it cant be restored at this time please im paying 100$ per month and i cant use my i phone 4 hep....
Error 3194 most often means that your Computer Hosts file is blocking Apple from signing your firmware. Search on your computer for the word 'Hosts'. Open the Hosts with a word processor. If gs.apple.com is present your Hosts file is blocking Apple, and therefore giving Error 3194. A stock Hosts file does not have gs.apple.com in it. If want Apple to Restore your Firmware you will need to remove the lines with gs.apple.com in them.
-
I don't have a rescue email option and i want to reset the security questions , so what shall i do?? I have been trying to do so for about 2 weeks , please can you help???
You will need to contact Support in your country to get the questions reset : http://support.apple.com/kb/HT5699
When they've been reset you can then use steps 1 to 7 half-way down the HT5312 page that you posted from to add a rescue email address for potential future use -
My macbook suddenly shut down, and when rebooted, imovie project was completely gone. No record of it at all. Have been working on it for days, and it has always been there. Other projects are still there. Any way to restore it? Thanks.
I figured it out!!!
Hey guys! Here's what I did that saved my project.
-SHORT VERSION-
Use the Finder window on your Mac to copy and paste your old project (the one not showing up in imovie) to a new folder so that iMovie will see it.
-LONG VERSION-
CONDITIONS:
The project has to exist on your hard drive. To see if it's hiding around somewhere go to:
Home (your name)>Movies>iMovie Library (right click and select Show Package Contents)
In the iMovie Library folder (the default is usually the date) open it to see if your Project is inside. If it is, you are in luck!
RESTORING PROJECT:
Open iMovie
start a new folder under the iMovie Library (again, the default is usually todays date)
Close iMovie
In the finder window (as explained above in the CONDITIONS section) select the files and folders of your project and copy them (in my case these consist of folders called Analysis Files, Original Media, "MYPROJECT", Render Files, Shared Items)
There should now be a folder with today's date in that Show Package Contents folder.
Paste a copy of your project;s files into this folder.
When it is done copying, open up the "Original Media" folder and all of your images and clips should be present.
reopen iMovie. Your project should show up in the Libraries list.
*If your full project isn't showing in the iMovie timeline (mine just had empty bubbles where all my clips and audio should be) try dragging and dropping the clips and images from the project's "Original Media" folder into the import section of your project. Once the files were reimported, iMovie recognized them all and put them back in the correct place for me.
Hope this helps someone! -
When I turn on my Ipad3, I get a message saying that no icloudback-up has been performed for three weeks... when I click on OK, there is no response and I also cannot unlock my Ipad 3.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Or quit the settings app and restart.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. -
I have an ipod touch 4g. I did not have wifi for three days and when I came home my friends said they texted me when i didnt have signal. The messages i received when i did not have signal are not showing up. Can someone please help me?
You said "The messages i received when i did not have signal are not showing up."
How do you know received them?
If the sender got a message that the Messagers were not delivered than they were never delivered and the only way for you to get them is for the sender to resent them -
Our Bridge has been acting very strange. It keeps giving a dialog box of "Bridge encountered a problem and is unable to read the cache. ... purge central cache" For one, I can't find the central cache and two, I've purged the cache in bridge. Shouldn't that help? There's just all kinds of weird stuff going on. I suppose it does have something to do with the central cache, so maybe someone can tell me where to find it.
When I use the burn/dodge tool sometimes it drags and staggers and takes forever to complete whatever I'm burning/dodging. When I try to delete an image from the dock, it won't disappear but it won't display either.
Any help would be appreciated.The Central Cache is the Bridge Cache.
It's referred as the Central Cache to differentiate it from the individual folder's cache or even the individual image cache. -
My hard drive went out one of my Macs and I am trying to install logic studio on another Mac but the serial number is invalid. What are my options?
Check that the serial you are using is the correct one..
Typically the problem is either you are misreading the serial and therefore typing it in wrong. Check you are correctly entering zeros or O.. and so on....
or...
You bought the LP9 upgrade version.... which requires the LP8 full serial as well.
If it is the LP9 upgrade serial.. (and not the LP9 full serial) you must enter your original LP8 full serial first and then the upgrade serial for LP9.. when it asks for it.
Failing that.. you can obtain a replacement serial from Apple.. using this form.....
https://ssl.apple.com/support/proapps/serialnumbers/ -
I bought a used iPod touch and when I try to set up my iCloud account, it says that the maximum number of free accounts have been activated on this device. Is there a way around this? I thought I could maybe set up the account on my PC and go from there, but it won't let me do that. It is forcing me to set up on the iPod. Am I doomed to have no iCloud account because I opted for a used device?
See this previous discussion.
icloud: The maximum number of free...: Apple Support Communities -
I changed my email address for my apple id but icloud still has old email adress and when I try to signout so I can sign in with new address it asks for password and then says invalid so I cannot delete the account to sign in with the new one! Please help
OK...now I appear to 'progressed' I changed my email address back to original on Apple id and then was able to delete icloud account. Apparently I couldnt do it as it kept requesting password when I entered passsword ( both old and new one, it wouldnt accept it as it had my old email address in ) It didnt do that on ios6 . Anyway I deleted account, but now I tried to login in with my new id/password and it says unable as already in use!!! More help needed please! Its a nightmare!!
Maybe you are looking for
-
Duplicate Semantic Key in Write Optimized DSO
Gurus Duplicate semantic keys have a unique index KEY in the key fields of the DSO when WRITE OPTIMIZED DSO is used. (Of course this is assuming the Do not check uniqueness of data indicator is not checked..) See help https://help.sap.com/saphelp_crm
-
Java Server Pages (Struts)
Hi all can any one help me.... i am new in struts .. i installed struts, tomcat on my computer I set all the paths and classpaths but when i call the page the IE gives the following error.... do any one reply me......here or on [email protected]
-
Cannot Access Firefox Sync in Linux
I have installed the Sync add-on for my Ubuntu Linux desktop version 10.10. I have Firefox 4.0 for Linux installed. The add-on installs fine and I am able to complete the setup process. When I go to the Sync tab in Preferences I get a error stating "
-
Hello, I have a issue with adding used DCs. I have one external library DC...say "extlib" This has all the jar files required. I have one Portal standalone DC...say "portaldc1" This portal dc has java classes in the src.API package. These classes req
-
I unistalled Photoshop Elements 12 from my computer and now when I'm trying to re-install I'm getting an error message "object already exist". Any suggestions on how to correct this?