I tried installing itunes but i keep on receiving the message "itunes library.itl" cannot be opened because it was created by a newer version of itunes. i tried to the troubleshooting guideline outlined in KB article TS5376 without success
How do i install Itunes on my windows(7) PC? i followed the guidelines issued outlined by Apple in KB TS5376 but i keep getting the message, the file "itunes library.itl" cannot be read because it was created by a newer version of itunes. what steps must i follow to install?
If you've already installed the latest version then the message may be a sign of a corrupt library. See Empty/corrupt library after upgrade/crash.
tt2
Similar Messages
-
I cannot open itunes. Getting error message: "the file iTunes library.itl cannot be read because it was created by a newer version of iTunes"
What do I need to do so I dont lose all my loaded music, etc.?
ThanksIf you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
Not sure if the following site/link will tell the method...
•Apple - Support - iTunes - install & update:
http://www.apple.com/support/itunes/install/
•Troubleshooting iTunes installation on Mac OS X:
http://support.apple.com/kb/HT2311
Good luck & happy computing!
ps: i see you resolved this issue. it's magic! -
I replaced my hard drive and reloaded itunes. Now it won't open and I get a message that the file itunes library.itl cannot be read because it was created by a newer version of itunes. What do I do?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates
EDIT: My apologies ... it'd be better to start straight in with the following user tip:
Empty/corrupt iTunes library after upgrade/crash -
I updated and now i can't use the itunes. I have unistalled several times, installing newer and older versions but still i get this message. Is there anything i can do to fix this problem??
Try the following user tip with that one:
Empty/corrupt iTunes library after upgrade/crash -
When i try to open itunes a hazard warning appears reading"the file itunes library.itl cannot be opened because it was created using a newer version of itunes" so i can't open my itunes on my computer
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates
EDIT: My apologies ... it'd be better to start straight in with the following user tip:
Empty/corrupt iTunes library after upgrade/crash -
just installed latest itunes to my laptop, and icon is on my homepage, but when i try to load it up, i get this message ,The File "itunes Library.itl" cannot be read because it was created by a newer version of itunes! Ive tried uninstalling it then installing again but nothing, ive ran scans on both itunes and quicktime to see what the problem is, and i just keep gettin this message! how do i fix this ANYONE please!
The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash -
Trying to Transfer iTunes to a New computer, but I get the error message The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes --- HELP
Did you downgrade iTunes? What version is listed in Help> About iTunes?
If you don't have iTunes 10.5.2, download it from here -> http://www.apple.com/itunes/download/
If you have iTunes 10.5.2, try re-creating your iTunes library. -
I uninstalled and deleted ver 11, installed ver 10.7 because ver11 won't work on my XPsp3 machine with my vinyl conversion software to mp3, but upon launch i get :"itunes library.itl cannot be read because it was created with a newer version of itunes'.
Hello, Stephen.
Thank you for the question. You will need to rebuild your iTunes library file in order to open an older version of iTunes. Below, I have included the article that walks you through this process. Start with the section labeled Re-creating the iTunes Library file.
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/ht1451
Cheers,
Jason H. -
I needed to upgrade my iTunes to register and sync a iPhone 5c. I upgraded by Apple Software and finally was able to download the upgraded iTunes. When I try to start iTunes I get this message, "The file iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. How can I repair this?
If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
Not sure if the following site/link will tell the method...
•Apple - Support - iTunes - install & update:
http://www.apple.com/support/itunes/install/
•Troubleshooting iTunes installation on Mac OS X:
http://support.apple.com/kb/HT2311
Good luck & happy computing!
ps: i see you resolved this issue. it's magic! -
I just installed iTunes on my new laptop. When I click on the desktop icon I receive a pop up that says "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes". I have no idea what this means or what to do about it. I can't even find a file on my computer like the one referred to in the pop up. I am currently considering keeping my old laptop if it is the only way for me to continue to access iTunes. What should I do to fix this?
What version of iTunes are you using? An .itl file is something that Windows uses, or very old versions of iTunes on Mac. The library file on Macs is now .xml and has been since late iTunes 4.
Is iTunes running ok without any problems after you OK that message? If it is, then you may be able to ignore it if you can't account for why you're getting it. But make sure you take backups in case something happens in the future. -
I receive the message: The file "iTunes library.itl"cannot be read because it was created by a newer version of itunes. I do not know exactly what this means. I have Windows 7 on my computer and was able access itunes until just recently. I have tried uninstalling and reinstalling itunes multiple times and that does not work. Sometimes I can get in when immediately after installing, but then if I close it, i cannot get back in. Now, i can't get in at all.
That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
I cannot get i-tunes. I tried the download, but no help. I get an error message The file "iTunes library itl" cannot be read because it was created by a newer version of iTunes. Any suggestions?
If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
Not sure if the following site/link will tell the method...
•Apple - Support - iTunes - install & update:
http://www.apple.com/support/itunes/install/
•Troubleshooting iTunes installation on Mac OS X:
http://support.apple.com/kb/HT2311
Good luck & happy computing!
ps: i see you resolved this issue. it's magic! -
Itunes was working fine until i plugged in my 6th gen shuffle. itunes wouldn't read the pod and it kept showing an error message telling me i needed to uninstall and reinstall itunes. So i did. Now, itunes won't open up. i keep getting the same message, " The file "itunes library.itl" cannot be read because it was created by a newer version of itunes. HELP!!!
Problem solved by doing the following:
Open PC/Mac and search for iTunes Library.
From the list, select the most recent version of iTunes Library. Save this to a folder.
Delete iTunes from your computer.
Install latest version of iTunes.
When I opened the new version of iTunes, everything was there as before.
I didn't need to import the saved version of iTunes Library. Maybe this happens automatically????? -
I accidentally uninstalled Quicktime from my computer so my Itunes was not functioning. It told me to uninstall my Itunes, then reinstall it. Which I did.
Trouble is, now it comes up with 'THE FILE "ITUNES LIBRARY.ITL" CANNOT BE READ BECAUSE IT WAS CREATED BY A NEWER VERSION OF ITUNES'...which I believe is because before I uninstalled my original Itunes, I had not completed the recent update to the newest version of Itunes, whereas the one I just installed is the latest one.
So THEN, I download the previous version of Itunes (iTunes 10.2.1(x64)) but when I try and run it, it comes up with the message that the thing '...IS NOT VALID WIN32 APPLICATION'.
Now I'm stuck and have absolutely no idea what to do. Please help!When iTunes updates, it should create a backup of your library file before updating.
You may be able to get back by using this article:
http://support.apple.com/kb/TS1967?viewlocale=en_US
When doing this, drag BOTH iTunes Library.itl and iTunes Library.xml to the desktop. You will need the xml file if the method above doesn't work.
In that case try this:
http://support.apple.com/kb/HT1451 -
I Was trying to update to the latest version; i uninstall to download new version because it wasn't letting me update. Now it wouldn't open at all because "The file"iTunes.Library.itl"cannot be read because it was created by a newer version of iTunes".:( How do i go back to last install or make this new version works?
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2
Maybe you are looking for
-
URGENT-- Data is going to delete after end of loop .
hi all, i have written code ..... SELECT DISTINCT M1VKBUR M1KUNNR M1VBELN M1BSTNK M1AUDAT M1KNUMV M2NETWR M2MWSBP M3ERDAT M3FKART INTO CORRESPONDING FIELDS OF TABLE ITAB FROM V
-
Hi Gurus, I have requirement to add 2 Key Figures from one query of InfoProvider A to another query of a different InfoProvider B. Please guide me in designing the query. Thanks, S
-
Hand tool won't drag image - PSE 11
Windows 7 - 4 gig RAM I use expert mode hand tool is selected, but it will not drag image. I can vertical scroll with mouse wheel. I cannot select scroll bar handles,but I can scroll by clicking blank agacent space. I have reset preferences to defaul
-
Understanding bug ID and release notes documentation
Hi ! we planned to upgrade IOS switch on some switches, most switches are running 4 to 10 or more IOS release in late in compare to the most recent one. We would like to upgrade because we had some issue with port flapping and spanning-tree portfast
-
I have iPhoto 11 on a Macbook PRO. It seems too simple a question, but when I import photos, where are they stored on my Mac? I cannot find the folders, only the main 'Pictures' folder which contains the iPhoto library, but I cannot see the individ