I updated my iPod touch to ios5 and some of the games failed to load, most of them are 3d ones.
Well, I actually don't like the some of the new features so I want to recover iPod, would that be possible?
Downgrading theiOS is not supported by Apple.
Have you looked to see if there are any updates for the games? Many develpers have had to update the games foriOS 5.
Also try:
iOS: Troubleshooting applications purchased from the App Store
Similar Messages
-
I have updated my ipod touch to ios5 and it is saying that the device is not registered in apple developers program.I have a back up fle in itunes and itunes is not prompting for restore.how can i restore my pod?pls help me to restore my ipod .am worried as it my new ipod and am not able to restore it.pls help.
i have done that .:(..PLs help me restoring it to older version.though i have a back up file.in itunes..am not able to restore it.as itunes is not asking for resotre option..pls help me
-
I tried to update my ipod touch to ios5 and it wont activate
I plugged in my ipod and tried to update it. I left it for an hour and half and came back. It was at the setup section on my ipod, I go through to get it set up but when it tries to activate it gives me a message saying that my ipod is unable to activate because the activation server cannot be reached, try connecting to itunes, or try again in a couple of minutes. It is connect via USB to my Macbook but still will not activate. help.
Apple activation servers seem to be very busy, you'll have to wait and try again to activate your device.
-
When I was updating my ipod touch 4g 8g 4.3.3 the USB came out and now it just shows connect to itunes and when i try to update it comes with error 6. I do all of the help things and nothing happoned
First see if placing the iPod in Recovery Mode will allow a restore.
Next try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If not successful then time for an appointment at the Genius Bar of an Apple store. You are not alone with this problem. -
Hello, I wanted to update my ipod touch 1st generation. The current software is 1.1.5. So I purchased iOS 3.1 software update for iPod touch (1st generation) and than I get an error so it did not upgrade. Can you help please?
I too had the same issue. This is how I resolved it http://www.parkhi.net/2011/12/error-8288-ipod-touch-upgrade-ios-31.html
-
I tried to update my ipod touch 4 gen and it automatically shutoff and said connect to itunes on the screen. I did. it says it found an error restoring ipod, what do i do now to resttore my ipod back to working and functioning condition?
Hi marty292,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
- Judy -
I have just updated my ipod touch (third generation) and it has taken off safari, it has just dissapeared, what do i do
Could be two things:
- It is on a screen and you can't find it. Try using the Spotlight search feature and search for Safari.
- Somehow the restriction for Safari got turned on. If on Safari is hidden and will not appear on the iPod even via search. Go to Settings>General>Restrictions.
- Also try resetting your iPod?
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears. -
I tried updating my iPod touch 4th gen and now the screen is bright blue or flashing white and black lines.ive tried the whole home and power button thing but it only brings up the apple icons then goes back to the blue or other screen.please help?
This has worked for some others.
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
while updating my ipod touch something happened and now the screen only shows the apple logo that goes on-off. i dont know what to do,please somebody help me!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I was downloading updates for Ipod touch 2nd gen and when the process was to the processing files point the screen changed and I wasn't given any idea as to whether the process was complete or not and if it was what was to be done next. I needed to reset the Ipod and now I am wondering what to do . Spend another Hour downloading and whatever amount on processing files and end up where I am now . Whats the next step in finding out what to do? This was the second attempt to do this with the first try happening the same except I am not sure how long the processing files part was.. Any suggestions as to what to try will be greatly appreciated.. Thanks
Likely a batter problem since high temperatures destroy a battery. I wold make an appointment at the Genius Bar of an Apple store to see what they say. It is free except for your time.
-
So i was updating my white ipod touch 4th gen and i restarted the ipod while it was half way done. Then after it restarted it would crash right after the apple sign...it would turn white, red,purple,green...any ideas of how to fix it??
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
When it says restore the iPid via recovery mode, try placing n recovery mode and restoring several times. -
Since I updated my Ipod touch to iOS 5 some of my apps close after a few minutes or just won't open at all. Is there anyone else who has this problem?
It's really annoying.....Yes. Try:
- Resetting the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Download/install a new app
- Restore from backup
- Retore to factory defaults/new iPod. -
When I try to update my iPod touch I get a message that the iTunes is already upgraded. My iPod is 4.1
Do you have a 2G, 3G or 4G iPod?
A 2G can go to 4.2.1
A 3G and 4G ro 5.1
Identify yours yours here:
Identifying iPod models
Do you have iTunes 10.6 on the computer?
What computer OS and version do you have?
If a Mac OSX 10.4.11 you need to update to t least 10.5.8. With 10.4.11 you can only go to iTunes 9.X and going beyond 4.1 requires 10.X -
how do you update an ipod touch? Mine does not have the software update under the general tab. I would like to back it up to Icloud. Thx
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch
To use iCloud you have to have iOS 5 or later.
Maybe you are looking for
-
Hi guys, I am working on a smartform. I wanted to know how do i put a checkbox in my text element in my smartform? Please help me out on this. Thanks and regards, Frank
-
How to create dll file and jar files in oracle forms ? and how to use in oracle forms?
pls teach me....
-
any body can help me to know the difference between function module and remote function module...?
-
Failed to load java type corresponding to e=application !!
Hello and execuse my poor english. When migrating from the WLS 8.1 to WLS 9.1, and when i try to deploy an EAR who contains some ejbs, i'd the folowing error : <i>"Failed to parse descriptor at 'META-INF/application.xml' for module 'null': com.bea.xm
-
PayPal Express Checkout Error 13122
We sell silver bars on line, one of the items we sell contain the word 'Lakshmi' in the title and description, customers getting error 13122 which is PayPal User Agrement Violation, when I remove the word customers are able to checkout. Any idea why