I upgraded to iOS8 on my iphone and now cannot see the thumbnails of my pictures when I try to download onto my computer.

I have an iphone 4 and an HP Pavillion with windows 7. I always have been able to connect my iphone to my laptop and open
the DCIM folder and see the picture icons so I can pick the ones I want to download. After upgrading to iOS8 I cannot see the icons after a
few seconds of connecting the phone to the computer. They all turn into the windows icon.
I do not want to try the icloud for windows control panel unless I can pick the pictures that will be transferred. I don't want all the pictures I take on my computer.

http://support.apple.com/kb/HT1808

Similar Messages

I upgraded my 3gs to 5.01 and now I get the message "iPhone may be damaged and cannot be activated for service." Whats going on?

I upgraded my 3gs to 5.01 and now I get the message "iPhone may be damaged and cannot be activated for service." Whats going on? I can't activate my device. It is essentially bricked at this point

Same issue c'mon apple.

I have upgraded my iPhone to iOS 5.1 and now cannot access the camera from a locked screen. Has anyone else had this problem?

I have upgraded my iPhone 4S to iOS 5.1 and now cannot access the camera from a locked screen. Anyone have any suggestions?

From the lock screen, to access the camera you touch the camera icon and slide in an upward motion. It no longer takes a tap to get it to open.

HT3743 my iphone 4 i bought was jailbroken to ios 6.0.1 redsn0w but i tried to restore the iphone and now it keeps saying connect to itunes but when i connect and try to restore an "unknown error" occurs and it will not boot up whatsoever. please help!

my iphone 4 i bought was jailbroken to ios 6.0.1 redsn0w but i tried to restore the iphone and now it keeps saying connect to itunes but when i connect and try to restore an "unknown error" occurs and it will not boot up whatsoever. please help!

If you want to solve your problems, unjailbreak. And don't do it again, because jailbreaking causes problems as you read about in that article. You can try Recovery Mode: http://support.apple.com/kb/HT1808

I have restored the settings on my iphone and now after entering the pin on my sim card it wants me to connect it to iTunes but when i try it just says my sim card is not supported... what can i do now?

I have restored the settings on my iphone and now after entering the pin on my sim card it wants me to connect it to iTunes but when i try it just says my sim card is not supported... what can i do now? It worked fine before...

natalieduffy wrote:
it says 'your iphone could not be activated because the activation server cannot be reached'
Typically this indicates a device that has been hacked to be unlocked or jailbroken.
If that is the case, no support can be provided here.

Upgraded to 10.6.1.7 as prompted and now cannot see any music purchased since March 23, 2012. How can I get these back?

Upgraded to 10.6.1.7 as prompted and now cannot see any music purchased since March 23, 2012. How can I get these back?
The error message says it cannot find the file but it exists as it was transferred to my ipod.
Thanks.

Ack! We don't need that much.
What you posted looks like the iTunes Library.xml file I will let you read about how iTunes works but not only is the .xml not your main library it is just the listing of tracks in your library and where the music files should be located. Your music is actually in media files (by the way, it is pointless to zip those as they are already compressed). Anyway, read these and you will see that your true library file (iTunes Library.itl) is only a small, but still important, part of a complete library.
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
Where are my iTunes files located? - http://support.apple.com/kb/ht1391
As you can see, a library has several components, so "getting it back" depends upon what is missing, what it was you actually backed up in the end, if any of this music was purchased from the iTunes Store, etc.

HT4972 im trying to update my iphone and now its saying the server is unavailable, or try through itunes and then it says that no sim is fitted? any ideas please

im trying to update my iphone and now its saying the server is unavailable so try connecting to itunes, once this is done it then says no sim is fitted?any ideas?

Lots of ideas... starting with, try a search of the forums for the issues that are occurring.

Just downloaded iOS 7.0 on iPhone and now cannot send email -sender address rejected by server???

JusJust downloaded iOS 7.0 on iPhone and now cannot send email -sender address rejected by server???

What happens when you go to the web based mail for your email account?
Are you able to login and send / receive messages from the web?
If so, you might need to check outgoing email settings on your iPhone
Settings > Mail, Contacts Calendars
Tap on the account you are having an issue with
Tap on the email address beside the word Account
Tap on info beside SMTP (SMTP = outgoing mail server)
Tap on the SMTP server name again.
Make sure server is turned on
Check settings & port info, password, etc.
Good luck!

Using my current ID and password I can sign in to Adobe. When I try to download the upgrade to Flash Player they ask for ID and password. When I put in my current one it is rejected. What causes this and how do I correct it?

Using my current ID and password I can sign in to Adobe. When I try to download the upgrade to Flash Player they ask for my ID and Password. When I insert my current ID and password it is rejected. How do I correct this problem? Is it an incorrect sign in from an old ID, and/or an old password associated with Flash Player?

The password prompt is supplied by the operating system, and is intended to protect you from accidentally installing software. You will get this prompt for any installation outside the App Store context.
If you do not need to enter a username or password when starting your computer, you can probably just leave the password field blank when acknowledging this prompt.

On a MS Vista platform I just "upgraded" to Firefox 10.0.2 and now cannot connect. My wireless devices go throught the same DSL line and work. fine. 9.0.1 (previous version) worked fine. Suggestions?

I just "upgradd" to Firefox 10.0.2 and now cannot access the internet. This is an MS Vista platform. Wireless devices, through the same DSL line, are still fine, suggestions?

Did you try to view this article? [https://support.mozilla.org/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox Problems connecting after Firefox Update]
You should also try using Firefox in [https://support.mozilla.org/en-US/kb/Safe%20Mode Safe Mode]
Thanks,
Borian

HT1338 My iTunes won't let me connect my iPhone because it says I need an updated iTunes, but when I try to download the new iTunes, it says that my Mac software (10.5.8) is too old. However, there are no software updates available. What can I do?

My iTunes won't let me connect my iPhone because it says I need an updated iTunes, but when I try to download the new iTunes, it says that my Mac software (10.5.8) is too old. However, there are no software updates available. What can I do?

It depends on what iPhone you have.
If it's an iPhone 4S or earlier, click here.
If it's an iPhone 5, you need to buy a Mac OS X 10.6 DVD, and that requires an Intel Mac with at least 1GB RAM.
(73384)

I did a software update on my ipad and now cannot access the internet. how can i fix this?

I did a software update on my ipad to 8.1 and now cannot access the internet. How do I fix this? My mail updates, but to get internet access I had to move from wifi to cellular data, and now even cellular data does not allow me access.

Hi Go to settings Reset Network Settings After Reset you need to enter your Router wireless key Before you do this turn off your Router for 30 seconds Also an option is to go on Websites for your make of Router look for any Firmware updates but you can do this later. Cheers Brian

Shuffle no longer syncs the playlists correctly and I cannot "see" the shuffle at all. There is no "device" folder in the left column. This may have occured after an Apple I-Tunes software update, but I am not sure. Software or hardware??

Shuffle no longer syncs the playlists correctly and I cannot "see" the shuffle at all. There is no "device" folder in the left column. This may have occured after an I-Tunes software update, but I am not sure. Is this likely a software issue or is the shuffle not working correctly?

Shuffle no longer syncs the playlists correctly and I cannot "see" the shuffle at all. There is no "device" folder in the left column. This may have occured after an I-Tunes software update, but I am not sure. Is this likely a software issue or is the shuffle not working correctly?

I am using mac book pro and I cannot see the video of my chatmate using skype or fb.please help

i am using mac book pro and I cannot see the video of my chatmate using skype or fb.please help

Is your version of Skype known to work with your operating system version?

Hello. I have downloaded ps cc in the Norwegian version. I then deleted the Norwegian Verson and will re installPerfect ps cc english verson. When I try to download ps cc again I do not get pressure on ps cc in creative clode distributions appear as updat

I have downloaded ps cc in the Norwegian version. I then deleted the Norwegian Verson and will re installPerfect ps cc english verson. When I try to download ps cc again I do not get pressure on ps cc in creative clode distributions appear as updated What can I installation alert ps cc again ?

That is not a practically empty xinitrc - that file only needs one line: exec WM. Other things are entirely optional, and some of them very useful, but I'd encourage you to stick with the simplest xinitrc that will do what you require.
Is slim involved? Probably. That is the source of many problems. But to start narrowing this down, I have 3 suggestions:
1) temporarily (at least) change your inittab to default to runlevel 3 ... actually, is it currently set to 5 or 3? if it is currently 3 that would explain why slim doesn't start.
2) at a tty in runlevel 3 use "xinit" instead of "startx". Startx is fine most of the time, but it is essentially just a complex wrapper for xinit. That complexity can often iadd useful functionality, but it *always* makes troubleshooting more difficult. So for now just use a vanilla 'xinit'.
3) remove dbus-launch from your exec line in xinitrc. This is done by console-kit so it is redundant and potentially problematic. Further BOTH of these are taken care of by slim, so I'd even suggest getting both a jump start on being ready for slim and simplifying troubleshooting by removing both of them. Just make that line "exec openbox-session"
Edit: adding one more:
4) temporarily switch out openbox-session for openbox. I suspect the reason feh's setting of the background is getting overridden is due to a script or setting in openbox's autostart settings - many of these are only invoked when "openbox-session" is called, while "openbox" starts *just* the window manager itself.
Last edited by Trilby (2012-10-03 17:30:36)

I upgraded to iOS8 on my iphone and now cannot see the thumbnails of my pictures when I try to download onto my computer.

Similar Messages

Maybe you are looking for