I use a browser-based Web CMS (CommonSpot 5.1) that uses dialog boxes (like a wizard). These boxes open very small and i must re-size them before seeing the options I'm trying to change. How can I change the default size of these dialog boxes?
the boxes include rulers and scrollbars, but I'd like to size all of them the same
I'm starting to come to this conclusion myself, actually... though, how mom managed to do this on accident without mucking about in terminals or anything more than just a cursory knowledge of the OS X system configurations (behind the scenes), I don't know : |
... on the other hand, her and I tend to be the exceptions to a lot of rules : |
I downloaded and installed TinkerTool, even though it supposedly doesn't work past 10.5.8, in the hoopes that, what it displayed (regardless of what it could change) would be correct as far as my "System" and "System (Headlines)" font settings were (see attached screenshot of the font section of TinkerTool for my system--not mom's).
I've instructed her to install and run the utility (but not to change anything) and then send me a screenshot of the "Fonts" section so I can compare it to my own. If there's something different on her system, since TinkerTool should work on hers, we may be able to fix it that way... though it would, frustratingly enough, remain a mystery to all concerned as to how she managed to stumble upon this in the first place : |
Anyway, I'm still hard at work on it... hopefully others are too and will share what they discover (if anything).
Similar Messages
-
I downloaded an album but one of the songs is corrupted, it only plays for about 4 seconds. When I try to re-download using the iTunes Store and "Purchased", it won't give me the option to download it again. How can I get the song I PAID for!!??
Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting that track from your iTunes library and redownload it via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes.
If you aren't in a country where you can re-download music or if it re-downloads in the same state then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
The back button used to work many times before it would reach the end of its list of pages I had been to recently and became greyed out, but now it will only work once before this happens. Also, the list of pages that pops up when I right click it now only has two entries no matter how many pages I've visited on that tab, the page I am currently on and the page I most recently left. Previous to the installation of the update to version 4 however, the list that appeared when I right clicked on the back button contained up to 10 items.
Try the Firefox SafeMode. <br />
''A troubleshooting mode, which disables most other Add-ons.''
# You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes -
Trying to erase settings from my old iphone but when I have to enter my itunes ID password the old email address is displayed. How can I change this to my existing itunes account so I can reset this phone? Thanks in advance.
I know it sounds weird, and that is the reason I posted my question. Because my case is not like all the ones I've found online and it's confusing. I added a screen capture of my itunes with my old iphone (the one that houses my playlists) connected to it.
My playlists "ARE" in my iphone 4s. They are still there even though they do not show up when I plug in to itunes in my computer.
When connecting my phone to itunes on my macbook, the playlists do not appear anywhere in itunes. I have found my connected iphone icon, I have clicked on the arrow next to it and it does pull up the standard lists that come with the iphone/itunes: Music, Movies, TV shows, books. That's it! below that is "Genius" and below "Geniuns" is "PLAYLISTS" but the only playlist of mine that shows there is one that I created several years back titled "90's music" and that one I created it on my computer, not my phone. Under "90's music" there are also other standard playlists that itunes automatically adds.
Does anyone else have this issue or know how to get around this. I am starting to think that I am going to have to recreate these lists on my computer -
I made a big mistake to change the setting of my Mac book pro to "me only". Now ofcourse It cannot open the login page, for how would the mac know it is me? How can I change the setting back to "everyone"? I have back up in the past but the last month I have not. I really want to keep the data.
So how can I go in and change the setting, It stays ofcourse at the apple screen with wheel. All info is there and the computer works fine, just cannot use it or have been able to log in.wjosten is spot on. If you really want iCloud, then you will need to acquire a new or second hand MBP that can run Lion.
Ciao. -
Since downloading ios8 to my I pad mini I am unable to sync movies, however I can sync them on my I phone 5s with same update? How can I change this?
Thanks - that helped. But when I tried to sync all my photo folders to the I pad 2, I tunes would add some but not all of the ones that were marked to sync, end the sync, then the I pad 2 would hang with the wheel turning, saying it was still syncing photos, and it would not end and the remaining folders of photos never appeared. I finally had to sync and re-sync over and over by adding one folder of photos at a time, then another and another.
-
My itones will not let me change my billing Information and I'm not able to update any of my apps.... How can I change it???
Have you tried here > Changing Account Information
http://support.apple.com/kb/HT1918
If no joy... Contact iTunes Customer Service
Apple Support iTunes Store Contact Us -
I have the wrong email address in ICloud. How can I change to the correct email address?
I have the same problem. I changed my email address with itunes, & the icloud website knows it too. but the icloud on my iphone still has the old one & wont allow me to change it. I can change the password but the email address is grayed out so I can't change it. I have tried signing out via the store on my phone & back in but it made no difference. Help!! I keep getting error messages about the photo stream ..but I don't know what I can do to correct it. HELP!!!
-
I bought a new 5c and transferred from an old update from my iPhone 4. The only issue I have is the name of my new phone. How can I change it from Amyiphone4 to something else?
settings - general - about - name - make the changes
-
I'm trying to download what's app chatting application and the massage given (need your secret answers for the below questions to proceed your purchase request ) but the problem is I forgot my answers :((( how can I reset the questions and the answer ????
Visit this site: http://support.apple.com/kb/HT5312
-
After getting my software update for safari yesterday (version 6.0) I've lost the google search bar on my menu bar. I've tried customizing the menu bar by dragging the google search bar to the menu bar, but no luck. How can I get the google search bar back?
You can't. It's now integrated with the URL bar. It's a search/URL combo.
-
hello..... i updated my iphone 3g (version 3.1.3) to ios4 (version 4.1) but i cannot change my background it is still the same black one!!! how can i change my background??????
You cannot. This is not a featue of the iphone 3G.
iPhone: Which iOS 4 software features does my iPhone support? -
I'm trying to download an app on my iPhone, however I'm being told that the terms and conditions have changed and i must look at them before i can download. I've gone through the terms and conditions multiple times and i can't find an 'accept' option?
Hello jody5758
Continue your troubleshooting with the article below. IT will walk you through checking the Date & Time as well as checking the settings of your router to ensure a proper connection.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
-Norm G. -
When converting word to PDF and reducing the size, the formatting changes how can i keep the format but reduce the size?
The original file is 32 MB:
15 MB is images
15 MB is Content stream
2 MB is everything else
After the PDF/A-1B save as:
The file is 182 MB
Almost 100% is Images
It is an architecture portfolio with many complex images. Is there a setting when I change to PDF/A that can limit the growth of the image files? -
When I import my Sony video, which is in m2ts format, the file size is a few times larger. This affects the volume of clips for creating the blu-ray or DVD discs. How can I squeeze the file size without sacrificing the quality of output? Is there any other ways of achieving this?
wongrayd wrote:
Thanks. I do not have the experience on burning discs from iMovie for the movie after editing (ie for video discs players). It seems that i cannot find the relevant command in the tool bar for this purpsoe. Would you please show me the way?
The command is gone because iDVD has been discontinued by Apple. After Apple discontinued iDVD they removed the iDVD burning link from iMovie. I still use iDVD sometimes, only because I have an old copy.
wongrayd wrote:
You have mentioned about Handbrake as a converter. What is the RF no. (under Constant Quality) meant? It seems that the smaller the no. is, the better quality will be. What is the optimal no.? or should we use the Average Bitrate? Again, what is the best rate? Furthermore, which format is more suitable or the best: H264 or mpeg 2/4?
I don't know what RF means. When I have used HandBrake, I've used presets that apply to what I want to do, so I don't know the meaning of each individual setting. However, it appears that many of them are listed in the HandBrake User's Guide that is linked from the Help menu in the program:
https://trac.handbrake.fr/wiki/HandBrakeGuide
wongrayd wrote:
For iMac, except iMovie, what other software is the best for the amateur? I have read Photoshop. Can this support m2ts files and user friendly?
Photoshop is not amateur-level software, and although it can edit a video, it cannot burn a DVD. Unfortunately, because I still use iMovie, I haven't tried anything else. You might want to read the reviews of various DVD-burning applications in the Mac App Store.
And maybe another forum member will jump in and help us here!
Maybe you are looking for
-
My ipod nano 5th gen. won't play movies or tv shows but it plays them on itunes. When I click on it the screen flashes black. I have tried taking the videos off my ipod and then putting them back on but it still won't work. what should i do?
-
Iphoto 11 Not saving photo edits
Iphoto Version 9.4.3 OSX 10.7.5, Build 11G63, Serial # W872101JVUX 3 GB SDRAM Have had many problems since switching to Iphoto 11, this is just the latest. This week I added 5 Jpeg photo's to a library and edited them. When I finished I returned to t
-
Syncing IPhoto Library with two users
Im a switcher so if this question is somewhat basic that is the reason why. My wife and I share the same Macbook but we have created two separate accounts on the same machine. As such, we each have our own iPhoto library. Is there a way that we can m
-
Standard Component Definition Class Change
Hello Experts 1) STD. UI Component: FICACMP_WLI 1st Viewset screen -> Search -> Search result When i press 'Continue' button on the serach result view, it will take me to next screen with worklist deta
-
hi all, i have the Query like this select NAME from ORG_NAME where contains(NAME, 'ward&') > 0; ERROR at line 1: ORA-29902: error in executing ODCIIndexStart() routine ORA-20000: Oracle Text error: While try to execute the Query i got Error .... if i