I use Firefox everyday. I go to open today and can't get it to open. ? Why

I've restarted my computer twice, just in case that was the problem. It doesn't appear to be the problem. I still can't open Firefox. This is what is happening. All that opens is a white page with transparent top. It has the Minimize, Restore, Close buttons in the upper right corner, but nothing else. I can't see anything else. Why is this happening? Here is a screenshot for your review.
[IMG]http://i59.tinypic.com/rc3gvd.jpg[/IMG]

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
Since you can't seem to get any menus in Firefox, make sure that it is not running, and you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Similar Messages

  • Running Firefox 22 on Mac with no Adblock and can't get most videos. Works fine in Chrome & Safari.

    I am unable to run most videos in Firefox. Have v22 and have had this problem for a while with several versions on both my Mac and PC laptop. I've tried downgrading Flash, didn't work. I've checked, and I'm not running Adblock. I'm about ready to dump FF and use a different browser although I don't want to. Any help is appreciated.

    Safe Mode isn't practical for permanent use, but you can try making some of the changes in regular mode.
    (1) Disable hardware graphics acceleration in Firefox (this is disabled in Safe Mode)
    Un-check the box here and restart:
    Firefox menu > Preferences > Advanced > General > "Use hardware acceleration when available"
    (2) Check for and disable any nonessential or unrecognized extensions on the following tabs (these would all have been disabled in Safe Mode):
    Tools menu > Add-ons > Extensions category
    (3) If you use any recorders/downloaders that interact with Flash media, and you do not want to disable them, make sure they are as up-to-date as possible

  • I haven't used my desktop iMac in a long time and can't get pass the opening login...I thought I remembered my password, but, apparently not.  How do I change it.  I don't THINK I have a "master password" on the thing.  I've never used one on any of

    I haven't used my IMac in a long time and went to boot it up, and I find I don't remember the correct username and password (I use several computers..I try to keep the passwords similar, with a number for the chronological order in which I started using them) I've tried all the others I use for passwords. The 'hint" keeps coming up for the password I am pretty sure is the correct one, but, still cannot get in.  I also don't remember whether I changed my surname on the computer...it was changed legally a little while ago, but some of my older devices still have my birth-name in there)
    HELP
    I don't think I ever set up a "master password" on the thing...I never use those.  I am the only person with access to my personal devices.
    thanks

    Forgot Your Account Password
    For Lion, Mountain Lion, or Mavericks
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see:
           Reset a Mac OS X 10.7 Lion Password
           OS X Mountain Lion- Reset a login password,
           OS X Mavericks- Solve password problems,
           OS X Lion- Apple ID can be used to reset your user account password.
    For Snow Leopard and earlier with installer DVD
         Mac OS X 10.6- If you forget your administrator password,
         OS X- Changing or resetting an account password (Snow Leopard and earlier).
    For Snow Leopard and earlier without installer DVD
        How to reset your Mac OS X password without an installer disc | MacYourself
        Reset OS X Password Without an OS X CD — Tech News and Analysis
        How To Create A New Administrator Account - Hack Mac

  • I'm using a Brother MFC 420CN (printer, fax, scanner) and can't get the scanner to work

    I'm running Lion 10.7.2 and downloaded the latest twain plug-in for lion from Brother. I don't know where the twain driver went after I downloaded it. I searched the computer for it and it doesn't show up. I wanted to drag it into the import folder photoshop plug-ins folder in Photoshop CS5. There is no Twain plug-in the folder now. when I try to scan from the Brother Control Center I get error messages and do what the messages suggest but nothing works.I don't use the fax, I occasionally use the printer and the printer still works. There is only 1 USB  cable that drives the Brother machine.

    Plug in the usb lead.

  • We are using CSS 6 (not Cloud) for our yearbook. Starting today pages are giving message that we are missing a bunch of plug-ins so files can't open. How can I get these plugins? Why is this happening?

    We are using CSS 6 (not Cloud) for our yearbook. Starting today pages are giving message that we are missing a bunch of plug-ins so files can't open. How can I get these plugins? Why is this happening?

    We are using CSS 6 for our yearbook. Starting today pages are giving message that we are missing a bunch of plug-ins so files can't open. We are 2 weeks from printer deadline so thia has to get fixed fast. We didn't update anything with the program. We ca

  • Just downloaded latest updates to Camera Raw for use with my new Sony RX100 M3 but still can't get the RAW files to open. Any suggestions?

    Just downloaded latest updates to Camera Raw for use with my new Sony RX100 M3 but still can't get the RAW files to open. Any suggestions?

    Never mind, I finally got it working, thanks!

  • I use Firefox as my default browser but, on any site, keep getting some words underlined in green from which an ad pops up. Really peeing me off! Doesn't happen on IE or Chrome. How can I stop this?

    I use Firefox as my default browser but, on any site, keep getting some words underlined in green from which an ad pops up. Really peeing me off! Doesn't happen on IE or Chrome. How can I stop this?

    From what you have described, I don't think you are ever going to pick that up as malware at all. But I did look at the site you mentioned in Google Chrome, and in IE9. First thought was maybe Chrome suppresses it, but that would be contrary to trying to convince you that their AdSense or IntelliTXT is "helping" you.
    What I did find in Chrome was
    "Google Chrome's connection attempt to ad-apac.doubleclick.net was rejected. The website may be down, or your network may not be properly configured."
    Since I don't have ad blockers in Chrome or IE, that tells me that my hosts file is doing its job, you can draw you own conclusions. There is something similar displayed in IE, but I can't read what was there because the font-size was too big. for the space. In Firefox with "Adblock Plus" extension it is all wiped out. The hosts file works across the entire system but is directed at blocking malware sites more than advertising. "Adblock Plus" is very good at blocking ads and can do its blocking with more generic filters, and can block a lot of malware from coming in but it can't block at the system level that a hosts file can.
    In IE although I can only see "It appea" because the font is too large and text does not wrap it does actually say "It appears you are connected to the Internet, but you might want to try to reconnect to the Internet."
    I would certainly suggest installing "Adblock Plus" extension and the "Easylist (USA)" filter subscription -- links are in the links previously provided, and installing the hosts file as well also in the links.
    It takes a bit more work to install and maintain a hosts file but the directions should be clear enough.

  • I d/l your mozilla firefox today and now I get the error 0x80070002 all the time...how do I fix that?

    I downloaded mozilla firefox today and now I get the error 0x80070002 all the time, and I cannot use system restore because of it. How do I fix that so that my computer works right again. I was restoring because after I d/l your mozilla today, I lost all of my contacts in my msn email...just been tearing my hair out over this and it is soo darn frustrating. Tell me how to fix this. Marilyn

    Hi,
    The error is totally unrelated to Firefox. Please see [http://support.microsoft.com/kb/910336 this]. The [http://answers.microsoft.com/en-us Windows OS forum] will also be helpful.
    Please also check the downloaded file by right-clicking > Properties > Digital Signatures, which should say '''Mozilla Corporation''' and '''This digital signature is ok''' in '''Details'''. You can download Firefox from a known site like e.g. https://www.mozilla.org/en-US/firefox/new/
    You can try to Reset Firefox which would hopefully display the missing features, all (contacts, emails, settings etc.) of which are actually stored at the MSN site and are temporarily displayed by Firefox every time the site is accessed.
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • I di dsomething to firefox and can't get it back to normal

    I clicked a button and the firefox toolbar disappeared. tried to fix it and now can't get firefox back at all.

    In Firefox 4 you can press F10 or use "Firefox > Customize" to make the Menu Bar and other toolbars visible and remove the check-mark on "Tabs on Top" to place the tab bar in the old position.<br />
    You see the orange (on Linux gray) Firefox button if the Menu Bar is hidden (View > Toolbars > Customize or right-click a toolbar).<br />
    If you need to access the hidden Menu bar then press F10 or hold down the Alt key to make the Menu Bar appear temporarily.

  • Just upgraded to Maverick and can't get my opening page to stay on GOOGLE. it keeps opening in SITES and then I have to click on GOOGLE.

    I just upgraded to Mavericks and can't get my opening page to stay on GOOGLE. IT keeps opening in SITES and then I have to click on GOOGLE to begin searching. I would rather not hav to go through 2 steps to start everytime. I entered google's address in preferences but it ignores my preference.

    You don't say which browser you are using so I will assume it's Safari. If so then open Safari - Preferences - General tab and look for where you set the home page, just set it to www.Google.com
    If this fails for some reason then  open Safari and reset it (look in the Safari menu) and choose all options for the reset. The re-try setting the preference. Post back with your results.

  • I installed PSE13 yesterday and can't get photo editor to open.

    I installed PSE 13 yesterday and can't get photo editor to open.

    Which operating system are you running on?
    If a windows system, use Windows Explorer to find the following file.
    "C:\Program Files\Adobe\Photoshop Elements 13\PhotoshopElementsEditor.exe"
    Try double clicking on it to run the editor directly rather than using the Welcome screen.
    Brian

  • I have paid for ipages 09 on 15/05 but never succed to enter the serial code. After 45 days, altough I was charged by 20 chf, I cannot completely use all ipages tools(impossible to save ). How can I get again the serial code I paid for?

    i have paid for ipages 09 on 15/05 but never succed to enter the serial code. After 45 days, altough I was charged by 20 chf, I cannot completely use all ipages tools(impossible to save ). How can I get again the serial code I paid for?

    Getting the request for a serial number means that at some time you had the iWork ’09 trial installed. You need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user. The easiest way to fix the problem is to use Yvan Koenig's AppleScript that removes the files. You can find it on his box.com account in for_iWork'09 > other_iWork'09 items > uninstall iWork '09.zip. Download uninstall iWork '09.zip, decompress it, open it in AppleScript Editor and click the Run button.
    Apple's support article on the subject says it's due to having a copy of the trial that is a higher version that the one you've purchased, but I'm not sure that is very common. This problem started with Snow Leopard & it seems to be some code in the iWork installers that doesn't do what it should.

  • Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.

    Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.

    Hi Winterwilly,
    Welcome to Apple Support Communities. 
    The article linked below answers your question of how to use QuickTime to record something on your MacBook Pro’s screen.
    QuickTime Player 10.x: Record your computer’s screen
    Cheers,
    -Jason

  • I use Windows 7 and can't get itunes to start due to msvcr80.dll missing.

    I use Windows 7 and can't get itunes to start due to msvcr80.dll missing.  I downloaded and installed latest version of itures and can't get it to start.  Any suggestions?

    Hi, I followed others yesterday with the same problem and removed all Apple Inc programs, rebooted and reloaded iTunes appears to of sorted this issue but as others have found OUTLOOK now takes ages to load and open ??

  • I tried to upgrade to Firefox 3.6.1 from 3.5 and now I get a msg that I need to reboot to complete a previous install of Firefox.

    I tried to upgrade to Firefox 3.6.1 from 3.5 and now I get a msg that I need to reboot to complete a previous install of Firefox. I have rebooted several times. I even tried to remove the Firefox from the add/remove program and it tells me that I need to reboot to complete a previous install. Right now, I just want to get rid of firefox

    Hi NWL1,
    Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

Maybe you are looking for

  • How do you get back to the main screen?

    How do you get back to the main screen? My little movie screen is not in the top right corner as it usually is... ever since it unexpectedly shut down. I can not edit it anymore and the screen is in the middle and the clips and sound are separated un

  • What Are the Recommended Guidelines for Importing HTML into InDesign?

    I would like to introduce an html document into an InDesign project - is that even possible? I'm not an MS Word user, but am running Open Office, should that be required in addition to having the entirety of the Extended CS6 Design-Web suite. Thank y

  • Why do we need a portal server, why can't an application server do the same job?

    what is the need of a portal server? why can't the same work be done by an application server alone? what is are the features of portal server which make it more attractive rather than an application server?

  • HELP - JavaScript error on Rollover Image

    Hello Everyone, I am really enjoying working with Dreamweaver until errors like the following come up. Could someone please help me!! The error reads: "While executing onLoad in Rollover.htm the following JavaScript error occured: In file "Rollover";

  • Movie Gets Big Too Fast

    Any suggestions on how to keep movie file size down to fit on one DVD? Am doing a family wedding video. But I'm over 3.5 gb and it's only 14 +/- minutes of raw clips at the highest quality setting. The wedding's not nearly over yet, forget about the