I've lost a file I started typing 9/8/11 from a downloaded template; how can I find it?

I received a template Tuesday, 9/6/11 and yesterday I began typing minutes in it. I can't find them today. Where else can I look? I've looked in downloads and MSWord documents.

You are GLORIOUS. I used that app, as finder still wouldn't find it. The app found it buried deep in iPhoto, despite the fact that I looked and looked though iPhoto and didn't see it.
There it was, 10 folders deep. How/why/when I started saving there, I do not know, but I now have my work back.
Thank you thank you thank you.

Similar Messages

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used? So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I ca

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?
So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I can apply the same burn properties to a project in Compressor 4?
Is it possible to see what iDVD did?

I don't know any way you can interrogate iDVD to reveal settings to the extent that you can in a Compressor project. What you could do is open up the show's VOB in MPEG STreamclip, go to File and Reveal Stream Information; that will at least give you some rudimentary info like average bit rate. Perhaps someone, with more iDVD experience, can chime in here.
The broader question is why use Compressor at all if your current workflow is doing the job to your satisfaction?
The value of Compressor is that it gives you control over the many parameters that affect size quality. and playability. The Compressor presets can give you a starting point for DVD delivery, Web, etc. From those presets, people typically experiment by adjusting the parameters until they get the desired results for their specific show. It's a little bit science and a little bit art. After experimenting, you may be able to get slightly better quality for the project you've successfully burned in iDVD by using Compressor and something likeToast…or maybe not.
Good luck.
Russ

CC Illustrator files (v17.0.0) won't reopen from the desktop. How can this be fixed?

CC Illustrator files (v17.0.0) won't reopen from the desktop. How can this be fixed?
Hmmm, the problem appears to have disappeared once I deinstalled Dreamweaver CS6. Coincidence?
Also our IT department sent me this, but no need for it at the moment:
Deleting the preference folder (in osx it's in "user/library/Preferences/Adobe Illustrator 17 Settings").
Illustrator will then create new preferences.

''FredMcD [[#answer-709783|said]]''
<blockquote>
The programers know of this and are working on it.
</blockquote>

HT1267 I lost my Iphone3G. I don't have any tracking app. in cell.How can I find my phone. Pls. help me out..

I lost my Iphone3G. I don't have any tracking app. in cell.How can I find my phone. Pls. help me out..

In your situation as you describe it, all you can do is physically look for it. There is no other way to locate it. Sorry.
Hope this helps

I've lost my iPod Touch but i didn't achive the mobile.me. How can I find the location?

I've lost my iPod Touch but i didn't achive the mobile.me. How can I find the location? It's a 4th generation iPod but I didn't sync the mobile.me in my iPod. I've lost it in a cab in Brazil, in the city of Curitiba, if some brazillian can help me..I would really appreciate!
I don't now how to do..I have all my trip photos and also some stuff from work.
I would be really really happy to know the location or to know something that I cand do to get it back! Thanks.

By looking for it. If you have activated FaceTime or some other app that will make a sound when you activate the app (Call with FaceTime or Skype) that will help. Otherwise ther is nothing special you can do. Change the passwords for all accounts used on the iPod and report it to the police in case someone turns it in.

Last night, mail suddenly lost all my emails, which were stored in mailboxes. What happened and how can I find my lost files? I have the latest MacBookPro, running Lion 10.7.2 all software updates installed

Last night the mail application from Apple lost all my old emails, which were stored in mailboxes, neatly sorted by category. What happened and how do I find them?
Details: I shut down mail to run errands outside my office. My late model MacBook Pro was on "sleep". When I returned, I opened the application, and (RATS!) all the mailboxes were missing. They just evaporated.
Operating system: 10.7.2 - all software updates installed and current as of 24 hours ago (12-30-11, 6 AM EST).
ln the mail program, the trash folder is OK and the sent folder is OK.
Yesterday, I did no maintenance on my mail folders.
HELP!

1 - the sudden disappearance of my 22 mailboxes, used to sort the emails that I need to file for future use
That was most likely the result of some kind of corruption, as I've already said, not a bug in Mail. Have you repaired the hard drive with Disk Utility recently? That wouldn't be a bad idea.
2 - at random times, mail (or the server) says that my password is incorrect and I must reenter (fix: usually I can quit mail, restart, and the connection is restored without reentering my password)
This is a known issue, where a failure to respond promptly on the server's end mimics what happens when the password is rejected. There's no need to quit Mail, just cancel when asked to enter the password, take the account back online and try again.
3 - mail seems to resort the mail in my mailboxes at random time. Several times a day, I must reset the sort to (a) by date; (b) by desending
Never seen that before. That points more to some kind of possible corruption in your Mail data or preference files.

I have lost years worth of music and pictures not all from the same pc how can i get it back

I have lost years worth of music and pictures from my ipod how can i retrieve them ?

- If photos were in your iPod Camera Roll, just restoe from backup. If they were synced to the iPOd you have to get them from where you got them the first place
- For itunes pruchsed music see:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
- For other music you will hae to get it from where you got it the first time.

Just did a system restore from my time machine and I can not find any of my files from my desktop. How can I find them?

I am a new apple user...sorry it took so long. I did a recovery from my time machine but I can not find any of the filesI was saving on my desktop. Are they gone for good or is there some way I can get them back? I am desperate...should I save my regular used files somewhere else other than my desktop?
Can I get the old desktop files back????

When you open TM you should see all of the desktop items right away. If they are not there, go back a day before you made your last retrieval. (Look for the dates on the time line on the right hand side of the display)
Ciao.

Partial background lost when I go to preview in Firefox but okay in IE browser, how can I find the problem in code?

My webpage is fine in the IE browser but in Firefox, I have lost the white background and part of the text/tables. I understand that Firefox is more exact with coding. Is there a way in DW3 I can check to see what I am missing and try and fix?
This is a first time post for me and I am a graphic designer by trade. Any help would be appreciated.
emwebber

emwebber wrote:
My webpage is fine in the IE browser but in Firefox, I have lost the white background and part of the text/tables. I understand that Firefox is more exact with coding. Is there a way in DW3 I can check to see what I am missing and try and fix?
This is a first time post for me and I am a graphic designer by trade. Any help would be appreciated.
emwebber
You say "DW3" but I assume that you mean DWCS3 - is that correct?
Anyhow, to diagnose anything, we'd need to see your page (live) and its underlying code. Can you post a link for us to examine?

I lost my serial number and i got a new computer i downloaded to how do i find it again?

how do i find my serial number again to put it on another computer? i don't have no info? help

hope dj's link helps you. Yeah folks; there are just some things we need to write down [remember that old fashion pen and paper stuff] or save in the computer or on an external h/hard or on a different computer

My Mac got hacked. I was working on a word document when the computer suddenly started typing meaningful sentences on its own that describes how the hacker is skillful. At the that time I was on a password protected wifi and file sharing was off.

This is the first time I get hacked this bad. I was working on a microsoft word document when the computer suddenly started typing meaningful sentences on its own that describes how skillfull the hacker is. At the that time I was on a friends wifi network that is password protected (not sure about the encyrption), the Os X Firewall was on. I was using the admin profile, however, file sharing was off. I'm very careful not to install any suspecious 3rd party software.
So far I have verified permissions and fixed some errors there, and changed passwords.
Do I have to erase/format my computer and reinstall the Os? If so is it adequte to use the internet recovery tool or will it use old and possibly infected EFI/Root files?
Would appreciate the advice of all the Mac experts out there. Thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo launchctl getenv DYLD_INSERT_LIBRARIES; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; launchctl getenv DYLD_INSERT_LIBRARIES; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

I started to download a movie for rent and lost internet connection. Now it tells me to go to my downloads but I can't find them where should I look.

I started to download a movie for rent and lost internet connection. Now it tells me to go to my downloads but I can't find them where should I look.

Me too!!! It says check your Downloads, but unable to find Downloads...

The circuit of my macbook is dead yet the hard drive is fine. I need to access a file from the hard drive, how can i do this? is there a cable i can connect to another mac that will let me transfer the file?

The circuit of my macbook is dead yet the hard drive is fine. I need to access a file from the hard drive, how can i do this? The mac turns on the screen freezes as bright blue. Is there a cable i can connect to another mac that will let me transfer the file?

There is another option if the Macbook will start up in Target Disk Mode.
Restart the computer while holding down the T key. If you see the firewire symbol moving around on the screen you can connect this one to another one in TDM. You will need a suitable cable to connect the two Macs.
http://support.apple.com/kb/ht1661
Firewire symbol:

How can I find a lost bookmark folder in another bookmark folder? I had a sticky mouse when I moved it.

How can I find a lost bookmark folder? A folder stuck on my mouse pointer I shook the mouse and it released the folder somewhere in the hundreds of other bookmark folders. I don't want to have to open every folder and search every file to locate it. Any ideas would be appreciated.

Renaldo,
You might try restoring a backup of your bookmarks.
1. From the menu at the top of the Firefox window bar, click the Bookmarks menu and choose Organize Bookmarks to open the Library window.
2. Before proceeding, you should make a backup of your current bookmarks.
1. From the toolbar on the Library window, select Import and Backup and choose Backup.
2. Firefox will ask you to save the bookmark backup to a folder on your hard drive. Choose a location that you will remember.
3. Your current bookmarks have been backed up to the file you selected.
3. From the toolbar on the Library window, select Import and Backup to open the Import and Backup menu, and pick Restore to see a list of available bookmark backups organized by date.
4. To restore one of the listed backups, select it from the Restore menu. Choose the newest bookmark backup that was created before the bookmarks were lost. You will lose all changes to your bookmarks that occurred after the date you select.
'''NOTE:''' To restore a backup that you saved manually, select Choose File from the Restore menu instead of selecting an automatic backup
5. A confirmation window will appear asking you to confirm replacing your bookmarks with the backup. To replace the bookmarks, press OK. To go back, press Cancel.
'''NOTE:''' You cannot undo this unless you saved a backup file as instructed above.
6. Your bookmarks have been restored to the date you selected. If your bookmarks do not show up after completing the restore process, repeat the above steps to restore an earlier backup.
If the backup follows the bookmark structure then the missing folder should be displayed
davewdan

How can I find a back up that i lost

how can I find a back up that i lost

How di you lose it?
iTunes puts it here:
iTunes places the backup files in the following places:
Mac:~/Library/Application Support/MobileSync/Backup/
Windows XP:\Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
Windows Vista and Windows 7:\Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press theReturn key.

I've lost a file I started typing 9/8/11 from a downloaded template; how can I find it?

Similar Messages

Maybe you are looking for