I've lost the ability to scroll in Firefox. I can scroll in Explorer and chrome and in any program on my laptop. When I try to scroll the little image of scrolling shows up but page won't move. I've shut down Firefox 3 times and my computer once.
Pretty much explained the problem in the above question.
Pretty much explained the problem in the above question.
Similar Messages
-
How do I save and import my bookmarks from another hard drive? When I try to open the installed Firefox on the old drive, it (obviously) opens a browser from the new main drive, free of bookmarks. Is there a way I can save the bookmarks on the old drive without opening a browser?
The guts of my computer were rearranged and I got a new main hard drive. My old one is still in there and I can get stuff from it, but when I go to the Mozilla folder on the old one, I can't figure out if there's anything I can do to get all my bookmarks from that drive to my new one, where Firefox is newly installed.If you open Firefox then Firefox will always use the default profile folder as found via profiles.ini on your system drive.
You either need to import the file in your current default profile or copy the file to your current profile folder while Firefox is closed.
Firefox 3 stores the bookmarks and the browser history in [http://kb.mozillazine.org/places.sqlite places.sqlite] and no longer creates an HTML backup by default.
There are also (five) JSON backups in the bookmarkbackups folder within the Firefox profile folder.
You can either copy the file places.sqlite to your [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] or import the most recent JSON backup from the bookmarkbackups folder of that old profile.
See:
http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See http://kb.mozillazine.org/Profile_folder_-_Firefox
"Application Data" in XP/Win2K and "AppData" in Vista/Windows 7 are hidden folders.
See http://kb.mozillazine.org/Show_hidden_files_and_folders
Go to: Control Panel > Folder Options > "View" tab > under "Hidden files and folders", select "Show hidden files and folders".
You may want to un-check the box "Hide extensions for known file types" to see the file extensions of all files. -
I have a problem to open my Number Program. this message appear when i try to open"The last time you opened Numbers, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again" then I tried to open it but nothing happened.... I would be thankful if you could help me..
Process: Numbers [1021]
Path: /Applications/Numbers.app/Contents/MacOS/Numbers
Identifier: com.apple.iWork.Numbers
Version: 3.0 (1470)
Date/Time: 2014-06-27 16:13:23.405 +0100
OS Version: Mac OS X 10.9.3 (13D65)
Report Version: 11
Anonymous UUID: 243D9264-54B7-E9AE-2F83-D11098965D14I have a problem to open my Number Program. this message appear when i try to open"The last time you opened Numbers, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again" then I tried to open it but nothing happened.... I would be thankful if you could help me..
Process: Numbers [1021]
Path: /Applications/Numbers.app/Contents/MacOS/Numbers
Identifier: com.apple.iWork.Numbers
Version: 3.0 (1470)
Date/Time: 2014-06-27 16:13:23.405 +0100
OS Version: Mac OS X 10.9.3 (13D65)
Report Version: 11
Anonymous UUID: 243D9264-54B7-E9AE-2F83-D11098965D14 -
I downloaded and installed Illustrator CS6 in Feb, 2014. Now, when I try to open the program it is asking me to sign in for a trial use. What happened to my software and how can I reinstall it?
CS6 or Creative Cloud Reverts to Trial Mode
http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html -
hi, i downloaded the creative suite and installed the trial versions of the programs (Photoshop etc.). when i try to insert the alphanumeric code to set it regularly operative it doesn't let me digit letters so that the code lies incomplete and the obtainment of the licence fails. how can i solve this disfunction?
The alpha numeric code is the redemption code which needs to redeemed by following the steps in http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
This shall help you to use the CC .
Regards
Rajshree -
Hello. I appreciate your help. I am in FCP7 and trying to do Boris Vector Shape effect. When I try to pull the vector shape square from the view window to the Superimpose, I get the message: insufficient content for edit. Why? I did this effect before and everything worked well. Thank you for your help.
Make sure that you have no active I/O markers on the Timeline (use Option X keys to clear them).
-
How can i get a recovery or boot disk for a hp compaq nx5000. when i try to start the computer, it
when i try to start the computer, it cycles on and off. Need disk.
Hi:
You can try to call HP at this number 1-800-334-5144, to see if they have any recovery disks left for that model.
If not, you can order a set from this other vendor for $27 + shipping.
http://www.computersurgeons.com/productdetails.aspx?ID=15126
Paul -
On another computer running Windows XP, when I try to open and acsm file with Adobe DE 3.0 I get an error box showing "Error! Check activation." Help!
I had the same problem.
Try this.
https://igppwiki.ucsd.edu/groups/publichelpwiki/wiki/a1538/Howto_Disable_Acrobat _as_the_Safari_PDF_Viewer.html -
Can't install latest version of Firefox. Continue to get message "update failed". When I try to install a downloaded version get message that I don't have the proper permissions. What' up with that?
If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data. -
Downloading, Installing, Setting Up
It sounds like you might be dealing with an upgrade situation where it is asking you to select the previous 'qualifying' version that you upgraded from. If that's the case then you will need to find the serial number for that older version as well.
-
Is this a common occurrence? It happens in the car; I replaced the audio cable but it hasn't made a difference. Both iPods have come from Target. I was told by an employee to reset the iPod but I haven't done it yet. I have only owned the replacement for a week. I owned the first one for 2 weeks.
I own HDM 2011. But they have products that aren't listed or hard to find too.
Recommending Pro version for one user's needs:
http://www.wilderssecurity.com/showthread.php?t=297756
Pro vs HDM 2011 feature comparison
http://www.paragon-software.com/home/hdm-personal/comparison.html
Forum topics:
http://www.wilderssecurity.com/showthread.php?t=297756
http://www.wilderssecurity.com/showthread.php?t=303155 -
My motor receives data via a serial connection, but it won't move. What am I doing wrong?
Hello everyone,
as the title says, I am trying to use a motor called "MP285" by Sutter Instruments via LabView. The control unit of this motor only has a RS232-output, but I use a Serial-to-Usb-Adapter to connect the device to the PC.
My problem is the following:
I tried to perform a basic Input/Output test by using the Ni MAX an sending ASCII strings to the control unit (after configuring it according to the reference manual), which worked fine. I also used the "jabber"-function of the control unit to send an output string to the PC and was also able to read that string from the buffer. Besides, when I used a LabView-VI to send a command via VISA Write, it also appears on the display of the control (at least the ASCII letters).
Accordingly, I assume that the Serial-to-USB-adapter does work. Is that for sure, or can the adapter evoke any other problems?
However, when I try to use the shipped controlling software, the motor won't work. Furthermore, I contacted the customer support and they sent me some VIs and a LabView-Project, which was tested by the company. Unfortunately, it did not work for me. The motor wouldn't move, when I sent the command, although the LabView-interface indicates that there the connection between PC and controller has been established. As the program has many features and I only need a command to move the motor, read the position and set the origin, I tried to build my own VI. I had a look at some basic VIs for motor control and referred to the manual.
As it seems, the controller uses data streams of full bytes (8 bits, not ASCII) in Big Endian for its strings (I copied the information at the bottom of this text). Thus, I tried to concatenate particular strings to send it via VISA in the correct form (see attached). Do I have to convert the "m" into hexadecimal explcitly? I looked up "Convert ASCII to Hexadecimal", but when I try this, the output string does not change.
However, when I send this string to the controller in normal mode, nothing happens . When I activate the Input/Ouput test (see above), there is a m displayed on the controller unit. So I guess, I am messing up the command structure. Can anybody help me please?
Kind regards
PS: Sorry for cleaning up the diagramm..
PPS: For some reason, I could not attach the VI because " The contents of the attachment doesn't match its file type". So, I changed the name in "-vi" instead of ".vi" as suggested by a forum user. Hope this works for you!
Excerpt form the reference manual:
General Information:
"Command requests are single bytes followed by optional parameters and terminated by a
carriage return (CR, 0Dh). The data stream consists of full bytes (all 8 bits — not ASCII.
The lowest order byte (for example, of the four bytes encoding the X coordinate) is the first
into the controller and is the first out. The default Baud rate is 9600. Commands are
processed bytewise by interrupt and executed only after the terminating CR is received.
There are no delimiters within command strings. The controller will reply with carriage
return (CR, 0Dh) at the completion of normal command processing."
Command structure:
Get Current Position command ‘c’CR 063h + 0Dh
returns xxxxyyyyzzzzCR three signed long (32-bit) integers + 0Dh
Go To Position command ‘m’xxxxyyyyzzzzCR 06Dh + three signed long (32-bit) integers + 0Dh
returns CR 0Dh
Setting up for Serial Communication:
First, use the 9-pin serial port cable provided with the MP-285 to connect the “serial port” of
your computer to that of the MP-285 controller. Next configure your terminal emulator (e.g.,
HyperTerminal in Microsoft Windows (9X and above) to the following settings (or their
equivalent):
• TTY mode
• Echo typed characters locally only (do not echo input to the computer serial port back to
the controller)
• Baud rate to 9600
• 8 data bits, no parity, 1 stop bit
• COM port - set to the port to which you have connected the MP-285 controller
Solved!
Go to Solution.
Attachments:
MotorTestVI-vi 17 KBThank you for your feedback!
To make this clear: I dont know if the motor MOVES when sending the appropriate command via MAX. That is because I dont know how to enter the binary? command. I only tried to send some string like "dear moto please move" to see if this ASCII string can be displayed on the control unit while running the input-mode (which I described above).
This works for both, MAX and my Labview-Vi.
However, these are the I/O traces:
1. MAX: I sent the string: "Test"
NI I/O trace:
viWrite (ASRL25::INSTR (0x026B41E8), "Test", 4, 4) Process ID: 0x0000123C Thread ID: 0x00001434 Start Time: 16:18:31.599 Call Duration 00:00:00.000 Status: 0 (VI_SUCCESS)
2. LabView-Vi (I removed everything that followed the first "Visa Write" and added the recommended property node to check if my termination char is correct). I sent string "TEST".
14. viOpenDefaultRM (0x065171F0) Process ID: 0x0000154C Thread ID: 0x00000678 Start Time: 16:24:34.918 Call Duration 00:00:00.000 Status: 0 (VI_SUCCESS)
15. viParseRsrc (0x065171F0, "COM25", 4, 25) Process ID: 0x0000154C Thread ID: 0x00000678 Start Time: 16:24:34.918 Call Duration 00:00:00.002 Status: 0 (VI_SUCCESS)
16. VISA Set Attribute ("COM25", 0x3FFF001A, 3000) Process ID: 0x0000154C Thread ID: 0x00000678 Start Time: 16:24:34.920 Call Duration 00:00:00.020 Status: 0 (VI_SUCCESS)
17. VISA Set Attribute ("COM25", 0x3FFF0021, 1200) Process ID: 0x0000154C Thread ID: 0x00000678 Start Time: 16:24:34.940 Call Duration 00:00:00.000 Status: 0 (VI_SUCCESS)
18. VISA Set Attribute ("COM25", 0x3FFF0022, 8) Process ID: 0x0000154C Thread ID: 0x00000678 Start Time: 16:24:34.940 Call Duration 00:00:00.001 Status: 0 (VI_SUCCESS)
19. VISA Set Attribute ("COM25", 0x3FFF0024, 10) Process ID: 0x0000154C Thread ID: 0x00000678 Start Time: 16:24:34.941 Call Duration 00:00:00.000 Status: 0 (VI_SUCCESS)
20. VISA Set Attribute ("COM25", 0x3FFF0023, 0) Process ID: 0x0000154C Thread ID: 0x00000678 Start Time: 16:24:34.941 Call Duration 00:00:00.000 Status: 0 (VI_SUCCESS)
21. VISA Set Attribute ("COM25", 0x3FFF0038, 1) Process ID: 0x0000154C Thread ID: 0x00000678 Start Time: 16:24:34.941 Call Duration 00:00:00.000 Status: 0 (VI_SUCCESS)
22. VISA Set Attribute ("COM25", 0x3FFF0018, 13) Process ID: 0x0000154C Thread ID: 0x00000678 Start Time: 16:24:34.941 Call Duration 00:00:00.000 Status: 0 (VI_SUCCESS)
23. VISA Set Attribute ("COM25", 0x3FFF0025, 0) Process ID: 0x0000154C Thread ID: 0x00000678 Start Time: 16:24:34.941 Call Duration 00:00:00.000 Status: 0 (VI_SUCCESS)
24. VISA Set Attribute ("COM25", 0x3FFF00B3, 2) Process ID: 0x0000154C Thread ID: 0x00000678 Start Time: 16:24:34.941 Call Duration 00:00:00.000 Status: 0 (VI_SUCCESS)
25. VISA Get Attribute ("COM25", 0x3FFF0018, 13) Process ID: 0x0000154C Thread ID: 0x00000678 Start Time: 16:24:34.941 Call Duration 00:00:00.000 Status: 0 (VI_SUCCESS)
26. VISA Get Attribute ("COM25", 0x3FFF0038, True) Process ID: 0x0000154C Thread ID: 0x00000678 Start Time: 16:24:34.941 Call Duration 00:00:00.000 Status: 0 (VI_SUCCESS)
27. VISA Write ("COM25", "TEST", 4) Process ID: 0x0000154C Thread ID: 0x00000678 Start Time: 16:24:34.941 Call Duration 00:00:00.001 Status: 0 (VI_SUCCESS)
28. VISA Close ("COM25") Process ID: 0x0000154C Thread ID: 0x00000678 Start Time: 16:24:34.942 Call Duration 00:00:00.110 Status: 0 (VI_SUCCESS)
Both strings are correctly displayed. -
After a recent hard drive crash I needed to authorise my pc again. I first de-authorised all previous computers (there was no other option)
Then I authorised the pc with the new hard drive.
then I tried to sync
Then itunes tells me iphone cannot sync as pc not authorised.
when I try to authorise the pc, itunes tells me pc is already authorised...
I have been playing this game 10 times now ... "cannot sync because pc not authorised" and then "cannot authorise as already authorised"
what can i do?
thanksyes, a few times. the number of authorised computers decreases and increases from zero to one and vice versa accordingly. yet I am still being told that it cannot sync.
-
I've been taking screen shots for years and opening them from my desktiop. Suddenly, today, I've lost the ability to open them. I can right click on the picture and do "quicklook", but that's it. They just won't open.
Similary, if I scan an image and save it as a PDF file in pictures, I'm suddenly not able to open it either!
Why?Move the com.apple.screencapture.plist file out of /username/Library/Preferences/ to the Desktop, log out and back in, and try again.
BTW, use the default 10 point setting for text. Your choice just wastes screen space. -
When I sync my iPod some of my purchases from iTunes transfer, but some do not. When I try to drag the songs onto the iPod icon it shows the 'crossed out' symbol and won't move them. I've tried synching from multiple computers that are all connected with home sharing but it still didn't do the trick.
Installing iTunes does not cause content to magically appear on the computer.
Your media is only where you put it.
iOS devices are not backup devices.
Copy the media from the old computer to the new computer.
Maybe you are looking for
-
Homehub 3 dropping connection to ipads
For around the last month our ipads and Macbook Pro are constantly dropping the wifi connection. We can't access Google Drive and are having problems with accessing the icloud. We have got a homehub 3 and BT customer support have not been helpful - t
-
Error during R/3 IDES installation -
Dear All I am trying to install SAP R/3 4.7E IDES on Windows 2003 Enterprise with Oracle 10.2.0.4 version. During the database load phase, i am encountering a problem during creation of D010LINF view which is using T0001 table and mentions that the t
-
My calendar in 10.8.2 never finishes updating and new entries are not syncing to cloud
When i open the Calendar app and choose to refresh my calendars the 'Calendar -- Updating...' message at the top of the calendar window never goes away and the new entries on my computer do not make it to the cloud. Additionaly new entries on the cl
-
Recently up graded to Labivew 7.1 from 6.1. 3-d graphs dont work right. VI's using the Activex 3-D graphs developed in 6.1 worked fine. Since up grading to 7.1 the graphs work after a fashion but many features don't. Anyone else have a similar prob
-
Having a hard time putting my plugin in my effect panel in final cut 7
I need help!!!!